Professional Documents
Culture Documents
CRT3217
DEH-P860MP/XN/UC
MULTI-CD CONTROL DSP HIGH POWER CD/MP3/WMA PLAYER WITH FM/AM TUNER
DEH-P860MP
DEH-P8600MP/XN/UC DEH-P8650MP/XN/ES
Model No.
CX-3098
/XN/UC
This service manual should be used together with the following manual(s):
Order No.
CRT3179
Mech.Module
S10WMAcode2
Remarks
CD Mech. Module:Circuit Description, Mech. Description, Disassembly
PIONEER CORPORATION
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
SAFETY INFORMATION
CAUTION
A
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician. WARNING This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. Health & Safety Code Section 25249.6 - Proposition 65
2
1 2
DEH-P860MP/XN/UC
3 4
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual.
2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed.
3. Cleaning
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning, proper cleaning should be performed to restore their performances.
B
DEH-P860MP/XN/UC
5 6 7 8
CONTENTS
A
SAFETY INFORMATION ..................................................................................................................................... 2 1. SPECIFICATIONS ............................................................................................................................................ 5 2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 8 2.1 PACKING(DEH-P860MP/XN/UC,DEH-P8600MP/XN/UC)......................................................................... 8 2.2 PACKING(DEH-P8650MP/XN/ES)........................................................................................................... 10 2.3 EXTERIOR(1) .......................................................................................................................................... 12 2.4 EXTERIOR(2) .......................................................................................................................................... 14 2.5 CD MECHANISM MODULE..................................................................................................................... 16 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 18 3.1 BLOCK DIAGRAM ................................................................................................................................... 18 3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE).............................................................................. 20 3.3 KEYBOARD UNIT.................................................................................................................................... 26 3.4 CD MECHANISM MODULE(GUIDE PAGE) ............................................................................................ 28 4. PCB CONNECTION DIAGRAM ..................................................................................................................... 38 4.1 TUNER AMP UNIT................................................................................................................................... 38 4.2 SWITCH UNIT.......................................................................................................................................... 42 4.3 KEYBOARD UNIT.................................................................................................................................... 43 4.4 CD MECHANISM MODULE..................................................................................................................... 44 5. ELECTRICAL PARTS LIST ............................................................................................................................ 46 6. ADJUSTMENT ............................................................................................................................................... 55 6.1 JIG CONNECTION DIAGRAM................................................................................................................. 55 6.2 CD ADJUSTMENT................................................................................................................................... 56 6.3 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT .................................................... 58 6.4 ERROR MODE ........................................................................................................................................ 60 6.5 OEL SCREENSAVER STUDIO LKA TO LKD APPLICATION.................................................................. 61 6.6 SYSTEM MICROCOMPUTER TEST PROGRAM ................................................................................... 61 7. GENERAL INFORMATION ............................................................................................................................. 62 7.1 DIAGNOSIS ............................................................................................................................................. 62 7.1.1 DISASSEMBLY ..................................................................................................................................... 62 7.1.2 CONNECTOR FUNCTION DESCRIPTION .......................................................................................... 66 7.2 IC ............................................................................................................................................................. 67 7.3 OPERATIONAL FLOW CHART ............................................................................................................... 81 7.4 CLEANING............................................................................................................................................... 82 8. OPERATIONS ................................................................................................................................................ 83
4
1 2
DEH-P860MP/XN/UC
3 4
1. SPECIFICATIONS
A
DEH-P860MP/XN/UC
5 6 7 8
6
1 2
DEH-P860MP/XN/UC
3 4
DEH-P860MP/XN/UC
5 6 7 8
Screw adjacent to mark on the product are used for disassembly. For the applying amount of lobricants or glue, follow the instructions in this manual. (In the case of no amount instructions,apply as you think it appropriate.)
2.1 PACKING(DEH-P860MP/XN/UC,DEH-P8600MP/XN/UC)
9 12 11 8
B
28 13 4 16
19 24
21
F
8
1 2
"
5 10 6 15 14 3
17
26 1
27 2
20
25 18
23
24
23 22
DEH-P860MP/XN/UC
3 4
17-2 Owner's Manual 17-3 Installation Manual 17-4 Causion Card 17-5 17-6 17-7 18 19 20 21 22 23 24 25 26 27 28 Causion Card Warranty Card Card Polyethylene Bag Carton Sub Carton Contain Box Protector Protector Protector Protector Microphone Assy Case Assy Remote Control Unit
* *
(2) CONTRAST TABLE DEH-P860MP/XN/UC and DEH-P8600MP/XN/UC are constructed the same except for the following:
Mark NO
1 17-2 17-3 17-6 17-7 19 21
Description
Cord Assy Owner's Manual Installation Manual Warranty Card Card Carton Contain Box
DEH-P860MP/XN/UC
CDE7436 CRD3828 CRD3829 CRY1070 Not used CHG5194 CHL5194
DEH-P8600MP/XN/UC
CDE7437 CRD3830 CRD3831 Not used ARY1048 CHG5193 CHL5193
* *
Language
DEH-P860MP/XN/UC
5 6 7 8
2.2 PACKING(DEH-P8650MP/XN/ES)
A
9 12 8 6
3 14
28 13 4 16
B
17
26 1
27
C
20
19 24
D
25 18
23
24
23 22
21
10
1 2
DEH-P860MP/XN/UC
3 4
17-2 Owner's Manual 17-3 Owner's Manual 17-4 Owner's Manual 17-5 17-6 17-7 18 19 20 21 22 23 24 25 26 27 28 Installation Manual Causion Card Causion Card Polyethylene Bag Carton Sub Carton Contain Box Protector Protector Protector Protector Microphone Assy Case Assy Remote Control Unit
CNV3930 CEG1116
Language
DEH-P860MP/XN/UC
5 6 7 8
11
2.3 EXTERIOR(1)
A
57
58
31 51 40 30 31 25 37
B
52
39 47
44
35 41 43
31
42 32 36 49 38 53 50 34 1 29 23 29 22 3 45 48 46
33
55
19 7 9 4 4 8 12 4 17 16 5 13 11 18 24 10 4 5
14
B (2/2)
B
A (2/2)
15
66 62 59
2 26 2 69
28 20 29 1 29
64 63
E
65 60
21 66 56
67
61
62 68 59
54 27 4
: GEM1024 4
12
1 2
DEH-P860MP/XN/UC
3 4
(2) CONTRAST TABLE DEH-P860MP/XN/UC DEH-P8600MP/XN/UC, and DEH-P8650MP/XN/ES are constructed the same except for the following:
Mark NO
3 27 30 55
Description
Drive Unit Chassis Unit Detach Grille Assy Sub Grille Assy
DEH-P860MP/XN/UC
CXC3136 CXC3134 CXC2569 CXC3738
DEH-P8600MP/XN/UC
CXC3135 CXC3133 CXC2570 CXC3737
DEH-P8650MP/XN/ES
CXC3015 CXC2998 CXC2571 CXC3736
DEH-P860MP/XN/UC
5 6 7 8
13
2.4 EXTERIOR(2)
1 1 6 41 2 40 2 2 9 9 7
39
B
42 39
10 45
C
11 13
43
19 16
38 21 5 21 5 30 36 28 23 31 24 25 32 29
F
20
5 46
35 20 4 18 34 14
17 14
D
33
A
A (1/2) B (1/2)
37
26 23 22 15 2
F C D
14
1 2
DEH-P860MP/XN/UC
3 4
CKS-786 CKS3126 CKS3408 CKS3837 See Contrast table(2) CKS4571 CKS4811 CNC5399 CND2040 CND2041 CND1054 CNR1729 CNV6727 RS1/2PMF102J
Case Unit CXC3476 CD Mechanism Module(S10CODE)CXK5677 Screw ISS26P055FTC Fan Motor(M561) CXM1288 Sheet CNM8789
(2) CONTRAST TABLE DEH-P860MP/XN/UC DEH-P8600MP/XN/UC, and DEH-P8650MP/XN/ES are constructed the same except for the following:
Mark NO
10 19 31
Description
Cord Assy Tuner Amp Unit Connector(CN931)
DEH-P860MP/XN/UC
CDE7436 CWM9266 CKS4124
DEH-P8600MP/XN/UC
CDE7437 CWM9267 CKS4124
DEH-P8650MP/XN/ES
CDE7436 CWM9268 Not used
D
DEH-P860MP/XN/UC
5 6 7 8
15
13 5 13 34 5 93 13
A B
81 15
E
22
F
92 82 83 68
G
26
44 5
B
1
13
D
86 86
54 53 37
52
28 4
28 45
J
4 55 4
1 1
71 87 50 72 10
23 38
36 4 18 29 51
1 2
73
23
K
64 47
75 59
I
1
76
24
49
E M
1
61
2
F A Q H
77
90 48
63
2 1
27 8 67 17 78 46 60 80 6
N
21
M
G N R
1 1
57
D
16
79
12
3
58
2
33
P
2
62
1
20
1
40
60 11 89 10
1 1
39 69 30 14 25
L
43
K
56
19
70
74
R
41 31 85
91
D
1 3 94 2
14 65 85 66 85
O
35 31
16
1 2
DEH-P860MP/XN/UC
3 4
Mark No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Description Connector(CN101) Connector(CN901) Screw Screw Screw(M2x4) Screw(M2x3) Screw(M2x3) Washer Washer Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Shaft Frame Frame Bracket Bracket Arm Arm Lever Lever Sheet Collar Guide Arm Rack Holder Holder Arm Gear
Part No. CKS4182 CKS4017 BMZ20P035FTC BSZ20P040FTC CBA1362 CBA1511 CBA1527 CBF1038 CBF1060 CBH2390 CBH2606 CBH2607 CBH2608 CBH2609 CBH2610 CBH2735 CBH2612 CBH2613 CBH2614 CBH2615 CBH2616 CBH2617 CBH2620 CBH2621 CBH2641 CBH2642 CBH2643 CBH2659 CBH2688 CLA4441 CNC9962 CNC9963 CNC9966 CND1895 CNC9968 CND1909 CND2032 CNC9984 CNM8134 CNV7798 CNV7799 CNV7800 CNV7199 CNV7201 CNV7202 CNV7203 CNV7207
Description
Part No. CNV7208 CNV7209 CNV7210 CNV7211 CNV7212 CNV7214 CNV7215 CNV7216 CNV7217 CNV7218 CNV7219 CNV7221 CNV7220 CNV7222 CNV7313 CNV7314 CNV7341 CNV7342 CNV7360 CNV7361 CNV7437 CNV7805 CNV7595 CNV7618 CXB6007 CXC2318 CXB8729 CXC2397 CXC2316 CND1896 CND1894 CXB8933 CNC9985 EBA1028 JFZ20P020FTC JGZ17P022FTC
E B
Rack Arm Arm Guide Roller Gear Arm Arm Arm Damper Damper Arm Arm Guide Guide Holder Arm Gear Damper Motor Unit(M1) Chassis Unit Screw Unit Gear Unit Arm Unit Arm Arm Motor Unit(M2) Bracket Screw(M2x5) Screw Screw Washer Pickup Unit(P9.9MP3)(Service) Screw Spring Clamper Connector(CN902)
DEH-P860MP/XN/UC
5 6 7 8
17
VDD
CN101
8
BUS+L 7 BUS-L 11
13
ROM_VDD
5
SL
10 9 8
CE1 DI CK
11
NC
14
DO
18 19 20 21
NC NC NC NC
WC
5 1
B
IC 5 3.3V
IC 3 EEPROM 5.0V
5V LPF
BUS
ANTENNA
1 2 3
CN402
1
AM ANT ATT
FMRF
OSC
Rch IC 1 3.3V 3 FM ANT ATT MIXER, IF AMP DET, FM MPX FMRF ANT adj RF adj T51 CF52 CF51 IC 2 2.5V
24
Lch
23
AUDIOGND
OSCGND
VDD_3.3
RFGND
DGND
VCC
12
15
22
16
NC
17
VDD_3.3
VCC
D CD CORE UNIT(S10WMACODE2)
CN902
V3R3D
CN101
15 5 AC,BD F,E FO+ 1 TO+ 4 LD+ 14 1 4 14 FOP TOP TD/FD 12 FOP 13 TOP M1 SPINDLE MOTOR SD/MD X702 142 Q101 143 LD PD
34 XTAL
IC 201 UPD63761GJ RF AMP, CD DECODER, LRCK MP3 AND WMA DECODER DIGITAL SERVO/DATA PROCESSOR
12 X1
13 X2 25 26
CD DRIVER
16 SOP 15 SOM 18 LCOP 17 LCOM LOEJ CONT 22 9 53 47
MICRO COMPUTER
LOEJ CONT
FTxD FRxD
M2 LOADING/CARRIAGE MOTOR
IC 301 BA5835FM
4 32 31 30 97
IC 701 PE5423A
CLAMP 12EJ 8EJ DSCSNS HOME VDCONT CD3VON 49 46
BRST,BRXEN,BSRQ BDATA,BSCK
VD VD 3 4 21 20 VD
S902 CLAMP
S904 12EJ
3.3V REGULATOR
3VDD V3R3D 3 3
VD2
IC 703
S-812C33AUA-C2N
VDD VD2 2 22 VD2
E
V1R5
V3R3D
1.5V REGULATOR
SWVDD 54 M571 FLAP MOTOR FLPPW FLPCLS FLPOPN
SWITCH UNIT
S1
KYDT
DPDT
18
1 2
DEH-P860MP/XN/UC
3 4
3.3V
TUNER 3V REGULATOR
3
IC 401
TUN8V
NJM2391DL1-33
MCKRQ
IC 122
4
TC7SH08
CN702
1 4 3 1 4 3
MCK TX RX
CN901
DOUT,LRCK, BCK
CN701
B
DOUT,LRCK,BCK DSPOUT,DSPCK,EV
MICROPHONE
IC 522
7 2
IC 521
7 93 ASLIN
85 92 39 1 68
MIC
MIC 521
NJM4558V
NJM4558V
VDCONT
19
VDCONT MCKRQ Q743 ROT0 ROT1 Q744 X601 11 13 36 35 B.UP XOUT XIN 41
CD3VON
23
CD3VON
VDD
19
VDD
MCKRQ ILMPW
SYSTEM CONTROLLER
Q571 B.UP Q572 38
IC 601(2/2) PD5928A
DSPPW
CN571
4 5 3 14 11 44 43
OUT1
4 OUT2
IC 571 BA6288FS
B.U
CLOSE
3
FCLSSW
51
FCLSSW OELPW 20
S2
OPEN
2
FOPNSW
50
FOPENSW
GD
33
IC 801(1/2 TC74VHCT125
13 12 9 10 GD
CN561
M561 FAN MOTOR
GDTC1 11
2 1
TC74VHCT125AFT
IC 80
GDTC2
A
CN101
Q101 8
L7 L 11 B.UP RST1 80 10 reset ASENBO Q651 1
RESET
IC 651
2 VDD
SWL
17
MUTE SWLCN351
Q352
9 10
SUB WOOFER L
5 1
S-80835CNMC-B8U
BZ601
BUZZER
PEE 22
RL
10
BUS5 BUS+
IP-BUS DRIVER
IC 101
1 TX 28 27 79 ce@ CE1 DO DI CK 69 70 98 99 100 95 TX RX
IC 321 15 PA2028A
Q353
RL
5 6
REAR L
6 HA12240FP 2 RX 8 IPPW
VDD
SYSTEM CONTROLLER
DSPMOD 32
FL
Q351 B.UP
12
13
IPPW
tunpce@
FL
MUTE
Q354
1 2
FU351
FRONT L
NW
IC 601(1/2) PD5928A
isens
81 8
A,C
Q881 VDD
VDD REGULATOR
Q882
3A
B
CN932
TELIN
DALMON
68
BACKUP SENSE
BSENS 73
B.UP 1
FUSE 10A
3V
IC 662
5V
DRDY,RDY, DSPIN
TC74VHC08FT
DRDY3,RDY3, DSPSO3 47 RQ3,DSPCK3, DSPOUT3,DSPCS3 1 7 48 2
5V
IC 661
TC74VHC08FT
MCKRQ
IC 122
4 1 24
DSP
IC 121 AK7730VT
16 9 8 SW,LRCKO, BCKO
TC7SH08FU
DOUT,LRCK,BCK TUN L BUSLBUSL+
IC 183
DAC IC 181
F,LRCKO, BCKO R,LRCKO, BCKO 25 26 X121 7 3 7 3
IC 211
DSPOUT,DSPCK,EVOLCS 33 Q281
SOURCE SELECTOR
ELECTRONIC VOLUME
TUN8V 1
DAC 5V REGULATOR
5
A,B
IC 961
AUDIO 8V
NJM2872F05
Q501 VDD AEQMIC
AUTO-EQ
FLPILM
ROT0 ROT1
CN801
11 10
11 10
CN1903
ROT0 ROT1
SOURCE/VOLUME
Q1806
ILLUMINATION
ILM+B ILMPW 41 37 7 7 ILM+B
CONTROLLER
601(2/2) D5928A
DSPPW 2 DSPPW VDD 38 Q832
OPT IN
3.3V REGULATOR
Q831 SWVDD 8 8 SWVDD 5 4
S-818A33AUC-BGN
SWVDD
cs)
AVCC
VCC1
VCC2
rs!
flbusy
IC 1901 RS-140
ROT1
OELPW DPDT
20
28
KYDT
16 AEQMIC GDTC1 1 3 6 4 12 AEQGND 15 RST1 DSENS DPDT RST 9 17 13 14 9 AEQMIC Q1906 S1913 17 DSENS 13 DPDT
33
IC 801(1/2) 2 TC74VHCT125AFT
5 13 12 9 10 GDTC2
ROT2
S1909
14 RST
DTC1 11
RESET
12 KYDT 15 AEQGND
5AFT
IC 801(2/2)
GDTC2
1K(1/2W)
ACC SENSE
3V
ILM SENSE
VDD Q921
3 8
1K(1/2W)
TELEPHONE MUTE
44
1/2VCC REGULATOR
4.7V 7 6 5 D3V A3V
AUDIO 3V REGULATOR
3
IC 941
AUDIO 8V
IC262 NJM4558MD
NJM2391DL1-33
B.UP 2
GND
LPF
1 39 29 FL 12 FLIN
POWER AMP
IC 301 PAL007A
1 37
27
RL
14
17 AUTOEQ
RLIN MUTE 22
STBY 4
RL+ B.REMOTE 25
B.REM
MUTE
Q301
AUDIO 8V REGULATOR
AUDIO 8V Q871 Q872 B.UP SYSPW Q451 Q873 SYSPW AUTOEQ Q502 DSPPW KEYAD KEYD Q862 Q861 B.UP
A,B
CN931
C
3.3V SWVDD 15 26
KEYBOARD UNIT
FLASH MEMORY
RY/by
VCC
IC 1807 PD6468A
ce
IC 1802
1 23
FONT ROM
IC 1806 VCC PD8124A
IC 1808 TC7WH32FK
7 2 6 5
E
KEY MATRIX
ce 12
4 1 5 97 14 60 48 36 4
KEY DATA
XIN XOUT
13 X1801 11
DPDT
CN1802
8 11 12
F
MICROPHONE INPUT
DEH-P860MP/XN/UC
6 7 8
19
Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or "ELECTRICAL PARTS LIST".
A-a A-b
A-a
A
TUNER AMP UNIT
A-a
A-b
Guide page
: SIGNAL LINE
P
A-a
A-b
Detailed page
B
2.5V 2.5V 2.5V 2.5V
1.65V
1.65V 1.65V
8 9 10 11
5 6
1 2 3 4
8.4V
D
DSP
5.5V
P P P
CN901
CN902
6.8V
E
ANTENNA CABLE
P
3.3V
S1 CLOSE CSN1051
S2 OPEN CSN1052
M
M571 FLAP MOTOR CXC2204
B
SWITCH UNIT
CN1903
A B
20
1 2
DEH-P860MP/XN/UC
3 4
A-b
3.3V 4.7V 4.7V
NOTE : Symbol indicates a resistor. No differentiation is made between chip resistors and discrete resistors. Symbol indicates a capacitor. No differentiation is made between chip capacitors and discrete capacitors.
Decimal points for resistor and capacitor fixed values are expressed as : 2.2 2R2 0.022 R022
5.0V
4.7V
4.7V
4.7V
4.3V
SUBWOOFER R CH SUBWOOFER L CH
4.7V
FRONT L CH
>
1.65V
A,C
TUNER(30%): +2.53dBs IP-BUS:+18.16dBs CD:+18.05dBs
B
TUNER(30%): -0.47dBs IP-BUS:+15.16dBs CD:+15.05dBs
6.9V 6.9V
6.9V 6.9V
8.5V
>
5.3V
P
8.3V
TEL RL FL RL+ FL+ RR FR RR+ FR+
9.5V
10.0V
CN1903
The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
A
DEH-P860MP/XN/UC
5 6 7 8
21
22
A-b
A-a
A-a A-b
2.5V
2.5V
DEH-P860MP/XN/UC
2.5V
2.5V
8 9 10 11
5 6
1 2 3 4
A
1
: SIGNAL LINE
2.5V
3
1.65V 1.65V 1.65V
8.4V
8.4V
CN901
CN902
ANTENNA CABLE
M
M571 FLAP MOTOR CXC2204
S1 CLOSE CSN1051
S2 OPEN CSN1052
B
SWITCH UNIT
A-a A-b
A-a B
E
CN1903
8
5
DSP
5.5V
6.8V 9
DEH-P860MP/XN/UC
3.3V
7 D
A-b
23
24
A-a A-b
3.3V
A-b
NOTE : Symbol indicates a resistor. No differentiation is made between chip resistors and discrete resistors. Decimal points for resistor and capacitor fixed values are expressed as : 2.2 2R2 0.022 R022
5.0V
1
Symbol indicates a capacitor. No differentiation is made between chip capacitors and discrete capacitors.
TUNER(30%):-7.97dBs IP-BUS: +7.66dBs CD: +7.55dBs
4.3V
4.7V
1
3.5V
4.7V
2
6.9V 6.9V 6.9V 6.9V 8.5V
4.7V
4.7V
4.7V
4.7V
DEH-P860MP/XN/UC
4.7V
FRONT L CH
>
A,C
TUNER(30%): +2.53dBs IP-BUS:+18.16dBs CD:+18.05dBs
1.65V
B
TUNER(30%): -0.47dBs IP-BUS:+15.16dBs CD:+15.05dBs
4
4
8.5V
5
14.3V
P
>
P
5.3V
1K(1/2W) ACC
8.3V
TEL RL FL RL+ FL+ RR FR RR+ FR+
5
7
DEH-P860MP/XN/UC
A-a A-b
9.5V
6
E D
10.0V
The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
8 A C B
A-b
25
RESET
B
CN801
MICROPHONE INPUT
5.2V 9.9V
9.1V
MULTI-CONTROL
OPEN
C
EQ
DISP
SOURCE/VOLUME
CLOCK
BAND/ESC
C
26
1 2
DEH-P860MP/XN/UC
3 4
KEYBOARD UNIT
FONT ROM
B
C
DEH-P860MP/XN/UC
5 6 7 8
27
D-a
S C T F F
L209
B
PICKUP UNIT(P9.9MP3)(SERVICE)
C217 R1
F F F F T T T T
F T T
AND
T T T F F T F F
# @
Pull-down
4.00MHz
3 2
T T
$
S
1
F
9
F
7
C
8 5
D
28
1 2
DEH-P860MP/XN/UC
3 4
D-b
D
CD CORE UNIT(S10WMACODE2)
AND
SWITCHES: CD CORE UNIT(S10WMACODE2) S901 : HOME SWITCH.........ON-OFF S902 : CLAMP SWITCH.......ON-OFF S903 : DSCSNS SWITCH.....ON-OFF S904 : 12EJ SWITCH............ON-OFF S905 : 8EJ SWITCH..............ON-OFF The underlined indicates the switch position.
1.5V REGULATOR
SIGNAL LINE FOCUS SERVO LINE TRACKING SERVO LINE CARRIAGE SERVO LINE SPINDLE SERVO LINE
C
F T C S
A
CN702
Pull-down
MICRO COMPUTER
PE5423A
C906
R22
E
3.3V REGULATOR
A
CN701
C722 1
470P
* &
C910
2R2
D
DEH-P860MP/XN/UC
5 6 7 8
29
30
D-b
D-a
D-a A-a D-b
C T S S C T F F
L209
2
C217 R1
PICKUP UNIT(P9.9MP3)(SERVICE) %
DEH-P860MP/XN/UC
F F F T T T T F F T T F T T F F
AND
# @
2
5
CD DRIVER
3.3V REGULATOR
5
Pull-down
4.00MHz
2
T T
$
S
1
F F
7
C
8 5
0
S S F F C T C T
DEH-P860MP/XN/UC
D-a A-a D-b
7 E D
5
8
D-b
D-a
31
32
D-a D-b
D-b
D
CD CORE UNIT(S10WMACODE2)
1
2
DEH-P860MP/XN/UC
!
3
3
1.5V REGULATOR
AND
SWITCHES: CD CORE UNIT(S10WMACODE2) S901 : HOME SWITCH.........ON-OFF S902 : CLAMP SWITCH.......ON-OFF S903 : DSCSNS SWITCH.....ON-OFF S904 : 12EJ SWITCH............ON-OFF S905 : 8EJ SWITCH..............ON-OFF The underlined indicates the switch position.
F T C S
SIGNAL LINE FOCUS SERVO LINE TRACKING SERVO LINE CARRIAGE SERVO LINE SPINDLE SERVO LINE
A
CN702
A
CN702
2
5 6
3.3V REGULATOR
C906 R22
C722 1
470P
C910
2R2
Pull-down
6
D-a D-b
MICRO COMPUTER
3
6 ^
LRCKOK LRCK BCK DOUT EMPH
PE5423A
4
7
DEH-P860MP/XN/UC
E D C
A
CN701
*&
5
8 A B
D-b
33
- Waveforms
A
Note : 1. The encircled numbers denote measuring points in the circuit diagram. 2. Reference voltage REFO1(1.65V) 500ms/div 1 DSCSNS 5 CLCONT 4 LOEJ 6 VD 5V/div 5V/div 5V/div 10V/div 500ms/div 1 DSCSNS 2 8SNS 3 12SNS 4 LOEJ 5V/div 5V/div 5V/div 5V/div 500ms/div
12 cm CD Loading operation
12 cm CD Loading operation
8 cm CD Loading operation
# FE 0 FIN @ TE 9 TIN
$ MDX 7 SIN
$ MDX 7 SIN
2V/div 1V/div
5s/div
34
1 2
DEH-P860MP/XN/UC
3 4
0 FIN # FE
% RFAGC @ TE 9 TIN
% RFAGC @ TE 9 TIN
% RFAGC @ TE 9 TIN
500ms/div
12 cm CD Eject operation
8 cm CD Eject operation
DEH-P860MP/XN/UC
5 6 7 8
35
5s/div
1V/div 1V/div
1s/div
^ LRCK * DOUT
1V/div 1V/div
1s/div
36
1 2
DEH-P860MP/XN/UC
3 4
DEH-P860MP/XN/UC
5 6 7 8
37
Connector
Capacitor
SIDE A
B
P.C.Board Chip Part
SIDE B
DSP
NW
D
STD
C
F
CN1903
A
38
1 2
FRONT
DEH-P860MP/XN/UC
3 4
ANTENNA CABLE
IC,Q
SIDE A
IP-BUS
B
CN902
CN901
B
F
FRONT
DEH-P860MP/XN/UC
5 6 7 8
A
39
PCL TEST
A
40
1 2
DEH-P860MP/XN/UC
3 4
SIDE B
A
DEH-P860MP/XN/UC
5 6 7 8
41
B
B
SWITCH UNIT
CN571
CLOSE OPEN
B
42
1 2
DEH-P860MP/XN/UC
3 4
C
IC,Q
KEYBOARD UNIT
CLOCK
SIDE A
KEYBOARD UNIT
SIDE B
IC,Q
MULTI-CONTROL
5 6 10 4
RESET
DISP
BAND/ESC
OEL MODULE
EQ
A
SOURCE/VOLUME MICROPHONE INPUT
CN801
OPEN
C
DEH-P860MP/XN/UC
5 6 7 8
43
CD CORE UNIT(S10WMACODE2)
SIDE A
CN701
PICKUP UNIT(P9.9MP3)(SERVICE)
HOME
A
F
CN702
D
44
1 2
DEH-P860MP/XN/UC
3 4
CD CORE UNIT(S10WMACODE2)
SIDE B
12EJ 8EJ
DSCSNS
CLAMP
D
DEH-P860MP/XN/UC
5 6 7 8
45
Part No.
Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q D D D
Part No.
2SD1859 IMD2A 2SD1760F5 IMD3A 2SC3052-12 IMD2A 2SD2396 2SD1767 IMD2A 2SB808 DTC114EU 2SD1760F5 IMD2A 2SC3052-12 2SD1767 IMD2A 2SD2396 IMD2A 2SD2396 2SB1243 RT1N141C-12 2SD1760F5 IMD2A DTC114EU IMX1 2SA1235A-12 MPG06G-6415G50 MPG06G-6415G50 1SS396 DA204K 1SS396 1SS133 1SR154-400 1SR154-400 1SR154-400 DAN202U HZS9L(A2) HZU3R9(B1) DA204U UDZS3R9(B) RB706F-40 HZS11L(B2) 1SS133 1SS133 HZS7L(B3) MA111
4
A Unit Number:CWM9266(P860MP)
Unit Number:CWM9267(P8600MP) Unit Number:CWM9268(P8650MP) Unit Name:Tuner Amp Unit
C
MISCELLANEOUS
IC 101 IC 121 IC 122 IC 181 IC 182 IC 183 IC 211 IC 212 IC 213 IC 261 IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor HA12240FP AK7730VT TC7SH08FU PCM1742KE PCM1742KE PCM1742KE NJM4580V NJM4580V NJM4580V NJM2112V NJM4558MD PML011A PAL007A PA2028A NJM2391DL1-33 NJM4558V NJM4558V BA6288FS PD5928A S-80835CNMC-B8U TC74VHC08FT TC74VHC08FT TC74VHCT125AFT NJM2391DL1-33 NJM2872F05 UMF23N DTC124EU DTC124EU IMD2A HN1C03F HN1C03F HN1C03F 2SC3052-12 IMD2A 2SC3052-12
IC 262 IC 281 IC 301 IC 321 IC 401 IC 521 IC 522 IC 571 IC 601 IC 651
IC 661 IC 662 IC 801 IC 941 IC 961 Q Q Q Q Q Q Q Q Q Q 101 281 301 351 352 353 354 451 501 502
D D D D D D D D D D D D D D D
322 351 401 402 403 451 452 501 502 521 522 561 571 572 573
D 651
46
1 2
DEH-P860MP/XN/UC
Part No.
HZS9L(B1) HZS6L(C1) DA204U DA204U DA204U DA204U DA204U DA204U DA204U HZS9L(C2) HZU10(B2) SML310BA1T HZS9L(B3) DAN202U HZS9L(B2) HZS6L(B1) MPG06G-6415G50 MPG06G-6415G50 MPG06G-6415G50 MPG06G-6415G50 HZS7L(C3) HZS7L(A1) DAN202U DAN202U DAP202U RCCA-201Q31UA-PI LCTC4R7K2125 LCTA1R0J2520 LCTA1R0J2520 CTF1379 CTF1379 CTF1389 CTF1379 CTF1379 CTF1379 CTF1379 CTF1379 CTF1379 CTF1379 LCTA2R2J2520 LAU101J LCTA4R7J2520 LAYU1R0K LAYU100K LAYU1R0K LAYU100K LCTC4R7K1608 LCTC4R7K1608 LAYU100K LCTC1R0K1608 CTF1379 CTF1530 LCTA1R0J2520 LCTA1R0J2520
Part No.
CPV1062 CWE1646
A
RESISTORS
R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 121 123 126 130 134 135 136 141 181 184 185 188 191 192 195 198 199 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 RS1/16S181J RS1/16S181J RS1/16S223J RS1/16S223J RS1/16S102J RS1/16S102J RS1/16S222J RS1/16S150J RS1/16S470J RS1/16S101J RS1/16S101J RS1/16S102J RS1/16S562J RS1/16S332J RS1/16S472J RS1/16S101J RAB4C101J RAB4C101J RAB4C681J RS1/16S562J
C
D 932 ZNR401 L 101 L 121 L 122 L L L L L L L L L L L L L L L L L L L L L L L L L 123 124 125 126 181 182 184 185 186 187 281 321 401 402 403 404 602 661 662 701 801 803 921 941 942
RS1/16S472J RS1/16S222J RAB4C681J RAB4C101J RS1/16S101J RAB4C101J RAB4C101J RS1/16S101J RAB4C101J RAB4C101J RS1/16S101J RAB4C101J RN1/16SE1202D RN1/16SE1202D RN1/16SE3901D RN1/16SE3901D RN1/16SE1002D RN1/16SE1002D RN1/16SE1502D RN1/16SE1502D RN1/16SE1202D RN1/16SE1202D RN1/16SE3901D RN1/16SE3901D RN1/16SE1002D RN1/16SE1002D RN1/16SE1502D RN1/16SE1502D RN1/16SE1202D RN1/16SE1202D RN1/16SE3901D RN1/16SE3901D RN1/16SE1002D RN1/16SE1002D RN1/16SE1502D
D
CSS1620 CSS1475 Slide Switch(DSP) (P860MP ,P8650MP) CSH1051 Semi-xed 10k(B) CCP1448 Fuse 3A > CEK1286 Microphone
5
CPM1011
DEH-P860MP/XN/UC
6 7 8
47
Part No.
RN1/16SE1502D RN1/16SE3300D RN1/16SE3300D RN1/16SE3300D RN1/16SE3300D RN1/16SE4702D RN1/16SE4702D RN1/16SE4702D RN1/16SE4702D RN1/16SE4702D RN1/16SE4702D RS1/16S563J RS1/16S473J RS1/16S473J RS1/16S473J RN1/16SE4702D RN1/16SE4702D RS1/16S682J RS1/16S0R0J RS1/16S0R0J RS1/16S0R0J RS1/16S0R0J RS1/16S0R0J RS1/16S0R0J RS1/16S103J RS1/16S222J RS1/16S332J RS1/16S103J RS1/16S103J RS1/16S103J RS1/16S331J RS1/16S103J RS1/16S103J RS1/16S0R0J RS1/16S820J RS1/16S820J RS1/16S103J RS1/16S103J RS1/16S223J RS1/16S223J RS1/16S471J RS1/16S471J RS1/16S820J RS1/16S820J RS1/16S103J RS1/16S103J RS1/16S223J RS1/16S223J RS1/16S471J RS1/16S471J RS1/16S820J RS1/16S820J RS1/16S103J RS1/16S103J RS1/16S223J RS1/16S223J RS1/16S471J RS1/16S471J RS1/16S102J RS1/16S681J R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R
Part No.
RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S103J RS1/16S223J RS1/16S473J RS1/16S682J RS1/16S152J RS1/16S683J RS1/16S153J RS1/16S561J RS1/16S222J RS1/16S104J RS1/16S103J RS1/16S153J RS1/16S153J RS1/16S103J RS1/16S223J RS1/16S102J RS1/16S563J RS1/16S101J RS1/16S152J RS1/16S152J RS1/16S104J RS1/16S222J RS1/16S104J RS1/16S104J RS1/16S473J RS1/16S0R0J RS1/16S473J RS1/16S1R0J RS1/16S391J RS1/16S102J RS1/16S102J RS1/16S102J RS1/16S102J RS1/16S471J RS1/16S471J RS1/16S104J RS1/16S472J RS1/16S104J RS1/16S104J RS1/16S104J RS1/16S223J RS1/16S104J RS1/16S473J RS1/16S0R0J RS1/16S104J RS1/16S104J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S473J RS1/16S104J RS1/16S104J RS1/16S104J RS1/16S102J RS1/16S104J
234 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 282 283 284 285 286 287 288 289 290 291 301 302 303 304 321 322 329 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 401
(P8600MP)
R R R R R R R R R R
E
R R R R R R R R R R R R R R R
48
1 2
DEH-P860MP/XN/UC
3 4
Part No.
RS1/16S104J RS1/16S102J RS1/16S222J RS1/16S102J RS1/16S473J RS1/16S183J RAB4C681J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S272J RS1/16S272J RS1/16S272J RS1/16S472J RS1/16S472J RS1/16S472J RS1/16S682J RS1/16S473J RS1/16S682J RS1/16S682J RS1/16S682J RS1/16S681J RS1/16S221J RS1/16S221J RS1/16S221J RS1/16S221J RS1/16S221J RS1/16S221J RS1/16S681J RD1/4PU331J RS1/16S471J RS1/16S104J RS1/16S104J RS1/16S104J RS1/16S222J RS1/16S222J RS1/16S222J RS1/16S222J RS1/16S222J RS1/16S104J RS1/16S104J RS1/16S222J RS1/16S222J RS1/16S473J RS1/16S473J RS1/16S222J RS1/16S103J RS1/10S1R0J RD1/4PU271J RAB4C221J RS1/16S103J RS1/16S103J RS1/16S181J RS1/16S181J RS1/16S561J RS1/16S561J RS1/16S681J RS1/16S561J RD1/4PU222J RS1/16S822J R R R R R R R R R R R R R R R
Part No.
RS1/16S333J RS1/16S821J RS1/16S821J RS1/16S103J RS1/16S104J RS1/16S104J RS1/16S103J RS1/16S473J RS1/16S473J RS1/16S472J RS1/16S102J RS1/16S472J RS1/16S472J RS1/16S153J RS1/16S103J RS1/16S104J RS1/16S102J RS1/16S102J
CAPACITORS
C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C 101 103 104 105 121 122 123 124 125 126 127 128 131 132 133 134 135 136 137 138 139 140 141 142 143 144 146 147 148 150 153 156 183 184 185 186 187 189 190 192 CKSRYB104K16 CCSRCH102J50 CCSRCH102J50 CKSRYB473K50 CKSRYB104K16 CKSYB106K6R3 CKSRYB104K16 CKSYB106K6R3 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSYB106K6R3 CCSRCH220J50 CKSQYB682K50 CCSRCH220J50
D
CKSRYB104K16 CCSRCH100D50 CCSRCH100D50 CCSRCH220J50 CKSYB106K6R3 CCSRCH102J50 CCSRCH151J50 CCSRCH102J50 CKSRYB103K50 CCSRCH102J50 CCSRCH390J50 CCSRCH220J50 CCSRCH220J50 CCSRCH220J50 CCSRCH150J50 CKSRYB102K50 CCSRCH102J50 CKSYB106K6R3 CCSRCH102J50 CKSYB106K6R3 CCSRCH102J50 CKSYB106K6R3 CCSRCH102J50 CKSYB106K6R3 CKSYB106K6R3
E
DEH-P860MP/XN/UC
5 6 7 8
49
Part No.
CCSRCH102J50 CKSYB106K6R3 CCSRCH102J50 CKSYB106K6R3 CKSYB106K6R3 CCSRCH102J50 CKSYB106K6R3 CCSRCH101J50 CEAL4R7M16 CEAL4R7M16 CCSRCH181J50 CCSRCH181J50 CCSRCH821J50 CCSRCH821J50 CEALNP4R7M16 CEALNP4R7M16 CEAL4R7M16 CEAL4R7M16 CCSRCH181J50 CCSRCH181J50 CCSRCH821J50 CCSRCH821J50 CEALNP4R7M16 CEALNP4R7M16 CEAL4R7M16 CEAL4R7M16 CCSRCH181J50 CCSRCH181J50 CCSRCH821J50 CCSRCH821J50 CEALNP4R7M16 CEALNP4R7M16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CCSRCH102J50 CCSRCH102J50 CCSRCH470J50 CCSRCH470J50 CCSRCH470J50 CCSRCH470J50 CKSQYB225K10 CKSQYB225K10 CKSRYB105K10 CKSRYB104K16 CSZS100M10 CSZS100M10 CKSRYB472K50 CKSRYB472K50 CSZS100M10 CKSRYB104K16 CKSQYB225K10 CKSRYB104K16 CKSQYB225K10 CKSQYB225K10 CSZS100M10 CKSQYB225K10 CKSRYB105K10 CKSQYB225K10 CKSRYB104K16 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C
Part No.
CKSRYB104K16 CFTNA224J50 CFTNA224J50 CFTNA224J50 CFTNA224J50 CEHAR330M10 CCH1486 CKSRYB104K16 CEHAR100M16 CKSQYB225K10 CKSQYB225K10 CKSRYB105K10 CKSRYB105K10 CKSRYB105K10 CKSRYB105K10 CKSRYB105K10 CKSRYB105K10 CEJQ4R7M35 CEJQ101M16 CASAQ3R3M16 CEJQ100M16 CKSYB684K16 CEJQ220M16 CKSRYB105K10 CEJQ330M25 CEJQ330M25 CEJQ330M25 CEJQ330M25 CEJQ100M50 CEJQ100M50 CKSRYB222K50 CKSRYB222K50 CEJQ100M50 CEJQ100M50 CKSRYB222K50 CKSRYB222K50 CEJQ100M50 CEJQ100M50 CKSRYB222K50 CKSRYB222K50 CEJQ220M16 CKSRYB473K50 CKSYB475K10 CKSRYB103K50 CEJQ470M6R3 CKSRYB103K50 CEJQ101M16 CKSRYB103K50 CEJQ220M6R3 CCSRCH101J50 CKSRYB103K50 CKSYB475K10 CCSRCH102J50 CKSQYB225K10 CEJQ101M6R3 CCSRCH681J50 CKSRYB105K10 CEALNP4R7M16 CEALNP4R7M16 CKSRYB105K10
4
193 194 196 197 199 200 201 202 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 261 262 263 264 265 266 267 268 269 270 271 272 281 282 283 284 285 286 287 288 289 290 291 292 293
1
3300F/16V
C C C C C C C C C C
F
C C C C C
50
2
DEH-P860MP/XN/UC
Part No.
CKSRYB474K10 CKSRYB104K16 CCSRCH101J50 CKSRYB105K10 CEAL100M16 CKSRYB105K10 CKSRYB105K6R3 CKSRYB105K6R3 CEJQ100M16 CKSRYB103K50 CKSRYB103K50 CCSRCH101J50 CCSRCH102J50 CEJQ220M16 CCSRCH101J50 CKSRYB104K16 CKSRYB224K10 CCSRCH180J50 CCSRCH220J50 CCSRCH470J50 CEJQ4R7M35 CKSRYB103K50 CKSRYB104K16 CKSRYB105K10 CKSRYB104K16 CKSRYB104K16 CCH1438 CKSRYB473K25 CCSRCH102J50 CEJQ101M16 CKSRYB473K25 CEHAR101M10 CKSRYB473K25 CKSRYB103K50 CKSRYB102K50 CEJQ101M16 CKSRYB104K16 CKSRYB104K16 CKSRYB103K50 CEJQ330M16 CCSRCH101J50 CKSRYB473K25 CEJQ221M10 CKSRYB472K50 CEJQ2R2M50 CEJQ221M10 CKSRYB103K50 CEJQ101M16 CEAL470M6R3 CKSRYB103K50 CKSRYB472K50 CCH1331 CCH1331 CKSRYB105K10 CKSRYB104K16 CCSRCH101J50 CKSRYB102K50 CEAL101M6R3 CEAL220M6R3 CKSRYB105K6R3
6
Part No.
CKSRYB104K16 CKSYB475K10 CEAL470M6R3 CKSRYB104K16 CKSRYB104K16 CKSYB475K10
C 965
B Unit Number:CWS1389
Unit Name:Switch Unit
S 1 S 2 Switch(CLOSE) Switch(OPEN) CSN1051 CSN1052
B
C Unit Number:CWM9270
Unit Name:Keyboard Unit
MISCELLANEOUS
IC 1802 IC 1805 IC 1806 IC 1807 IC 1808 IC 1901 Q 1806 Q 1906 D 1803 D 1901 D D D D D D D D D D D D D D D D L L L L X S S S S S S S S 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1801 1802 1803 1804 1801 1901 1902 1903 1904 1905 1906 1907 1908 IC IC IC IC IC IC Transistor Transistor Diode LED LED LED LED LED LED LED LED LED LED LED LED LED LED LED LED LED Inductor Inductor Inductor Inductor Radiator 10.0MHz Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch
7
S-818A33AUC-BGN PD5943A PD8124A PD6468A TC7WH32FK RS-140 UMD2N 2SC3052-12 1SS355 SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T SML310BA1T CTF1530 CTF1484 CTF1530 CTF1399 CSS1577 CSG1155 CSG1155 CSG1155 CSG1155 CSG1155 CSG1155 CSG1155 CSG1155
470F/10V
470F/16V 470F/16V
DEH-P860MP/XN/UC
8
51
Part No.
CSG1155 R R R R R R R R R R R R R R R
Part No.
RS1/16S221J RS1/16S221J RS1/16S221J RS1/16S221J RS1/16S821J RS1/16S221J RS1/16S221J RS1/16S221J RS1/16S221J RS1/16SS222J RS1/16SS332J RS1/16SS822J RS1/16SS4702D RS1/16SS102J RS1/16SS102J RS1/16SS103J RS1/16SS221J
Push Switch
S S S S S
Push Switch CSG1155 Push Switch CSG1155 Encoder(SOURCE/VOLUME)CSD1104 Switch(MULTI-CONTROL) CSX1065 Push Switch CSG1155
RESISTORS
R R R R R R R R R R R R R R R
C
1807 1808 1809 1810 1811 1812 1815 1816 1817 1818 1819 1820 1821 1822 1824 1825 1826 1827 1828 1829 1830 1831 1832 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1849 1850 1851 1852 1853 1854 1903 1904 1905 1906 1916 1917 1918
RS1/16SS222J RS1/16SS222J RS1/16SS101J RS1/16SS101J RS1/16SS473J RS1/16SS104J RS1/16SS101J RS1/16SS101J RS1/16SS101J RS1/16SS101J RAB4CQ101J RS1/16SS222J RS1/16SS154J RS1/16SS473J RS1/16SS473J RS1/16SS473J RS1/16SS473J RS1/16SS473J RS1/16SS473J RS1/16SS473J RS1/16SS473J RS1/16SS102J RS1/16SS0R0J RAB4CQ473J RAB4CQ101J RAB4CQ101J RAB4CQ101J RAB4CQ101J RAB4CQ101J RAB4CQ101J RAB4CQ101J RAB4CQ101J RAB4CQ101J RAB4CQ101J RS1/16SS473J RS1/16SS473J RS1/16SS473J RS1/16SS392J RS1/16SS682J RAB4CQ101J RS1/16SS101J RS1/16SS101J RS1/16SS0R0J RS1/16SS274J RS1/16SS103J RS1/16SS121J RS1/16SS2R2J RS1/16SS104J RS1/16SS223J RS1/16SS103J
R 1945 R 1946
CAPACITORS
C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C 1806 1808 1809 1810 1814 1816 1817 1822 1826 1827 1833 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 10F CSZSP4R7M10 CKSRYB474K10 CKSSYB103K16 CKSSYB103K16 CKSSYB473K10 CKSSYB103K16 CSZSP4R7M10 CKSSYB103K16 CKSSYB103K16 CKSSYB103K16 CCG1138 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSSYB104K10 CKSSYB104K10 CSZSR100M16
R R R R R R R R R R
D
R R R R R R R R R R R R R R R R R R R R R R R R R
C 1920
D Unit Number:CWX2953
Unit Name:CD CORE UNIT(S10WMACODE2)
MISCELLANEOUS
IC 201 IC 203 IC IC
3
UPD63761GJ NJM2391DL1-33
4
52
1 2
DEH-P860MP/XN/UC
Part No.
BA5835FM S-L2980A15MC-C6A PE5423A S-812C33AUA-C2N 2SB1132 UN2111 1SS355 CTF1389 CTF1389 CTF1389 CTF1389 CTF1306 CTF1306 CTF1306 CSS1654 CSN1051 CSN1051 CSN1052 CSN1051 CSN1051
Part No.
RS1/16S0R0J RS1/16S0R0J RS1/16S0R0J RS1/16S0R0J RS1/16S0R0J RS1/16SS183J RS1/16SS822J RS1/16SS183J RS1/16SS822J RS1/16SS183J RS1/16SS183J RS1/16SS183J RS1/16SS183J
B
RS1/16SS0R0J RS1/16S0R0J RS1/16SS0R0J RS1/16SS104J RS1/16SS104J RS1/16SS221J RS1/16SS221J RS1/16SS0R0J RS1/16SS221J RS1/16SS473J RS1/16SS102J RS1/16SS102J RS1/16SS102J RS1/16SS102J RS1/16SS473J RS1/16SS101J RS1/16SS472J RS1/16SS221J RS1/16SS221J RS1/16SS221J RS1/16SS471J RS1/16S0R0J RS1/16S473J RS1/16SS222J RS1/16SS103J RS1/16SS473J RS1/16SS223J RS1/16SS473J RS1/16SS104J RS1/16SS104J RS1/16SS104J RS1/16SS473J RS1/16SS104J RS1/16SS473J RS1/16SS104J RS1/16SS473J RS1/16SS104J RS1/16SS102J RS1/16SS473J RS1/16SS102J RS1/16SS102J RS1/16SS102J RS1/16SS104J RAB4CQ221J RAB4CQ221J RAB4CQ221J RS1/16SS221J
7 C
S 904 S 905
RESISTORS
R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 101 102 103 104 105 107 201 202 205 207 209 210 214 216 218 220 221 222 223 224 225 226 227 228 229 231 232 233 237 238 239 240 241 243 245 RS1/10S1R5J RS1/10S1R5J RS1/10S1R5J RS1/10S1R5J RS1/10S1R5J RS1/16SS0R0J RS1/16SS102J RS1/16SS333J RS1/16SS473J RS1/16SS473J RS1/16SS473J RS1/16SS0R0J RS1/16SS472J RS1/16SS472J RS1/16SS472J RS1/16SS472J RS1/16SS103J RS1/16SS103J RS1/16SS0R0J RS1/16SS0R0J RS1/16SS103J RS1/16SS393J RS1/16SS562J RS1/16SS122J RS1/16SS472J RS1/16SS0R0J RS1/16SS122J RS1/16SS0R0J RS1/16SS221J RS1/16SS221J RS1/16SS221J RS1/16SS0R0J RS1/16SS333J RS1/16SS333J RS1/16SS333J RS1/16SS0R0J RS1/16SS0R0J
R 250 R 256
R 773 R 777
DEH-P860MP/XN/UC
5 6 8
53
Part No.
RS1/16SS221J RS1/16SS221J RAB4CQ221J RS1/16S0R0J RS1/16SS221J RS1/16SS221J RS1/16SS0R0J RS1/16SS0R0J C C C C C C C C C C C C C C C
Part No.
CKSQYB475K6R3 CKSSYB104K10 CKSSYB471K50 CKSSYB103K16 CCH1592 CKSSYB104K10 CKSSYB104K10 CKSRYB224K16 CKSSYB104K10 CKSSYB104K10 CKSSYB103K16 CCSSCH180J50 CCSSCH180J50 CKSQYB225K10 CKSRYB105K10 CKSSYB471K50 CKSRYB224K16 CKSQYB225K10
4.7F/25V
CAPACITORS
C C C C C C C C C C C C C C C C C C C C C C C C C
D
101 102 103 104 105 106 107 108 110 201 202 203 205 207 208 209 216 217 218 219 220 221 222 223 224 225 226 227 228 230 232 233 234 235 237 239 242 246 249 250 251 260 301 302 303 304 305 306 307 501
100F/16V 47F/6.3V
CKSSYB104K10 CKSSYB104K10 CCH1504 CCH1506 CKSSYB104K10 CCSSCH101J50 CKSRYB224K16 CKSSYB104K10 CKSSYB104K10 CKSSYB471K50 CKSSYB104K10 CKSSYB104K10 CKSSYB104K10 CCH1590 CKSSYB104K10 CKSSYB104K10 CKSSYB332K50 CKSSYB104K10 CKSSYB223K16 CKSSYB104K10 CKSSYB103K16 CKSSYB104K10 CCSSCH560J50 CCSSCH5R0C50 CKSSYB104K10 CKSSYB103K16 CCSSCH680J50 CCSSCH470J50 CKSSYB682K25 CKSSYB104K10 CKSSYB104K10 CCH1470 CCH1590 CKSRYB224K16 CKSSYB104K10 CCSSCH330J50 CKSSYB104K10 CKSSYB104K10 CKSSYB221K50 CKSRYB102K50 CKSRYB102K50 CKSSYB104K10 CKSSYB221K50 CKSSYB221K50 CKSSYB472K25 CKSSYB103K16 CCH1504 CKSSYB104K10 CKSSYB104K10 CKSRYB224K16
220F/4V
M M M M
1 2 561 571
Motor Unit(LOADING/CARRIAGE)CXB8933
C C C C C C C C C C
E
10F/6.3V 220F/4V
C C C C C C C C C C C C C C C
100F/16V
54
1 2
DEH-P860MP/XN/UC
3 4
6. ADJUSTMENT
6.1 JIG CONNECTION DIAGRAM
A
CN801
B
GGD1160
CN1903
D
Rubber Band
Rubber Band
DEH-P860MP/XN/UC
5 6 7 8
55
6.2 CD ADJUSTMENT
A
1) Cautions on adjustments In this product the single voltage (3.3V) is used for the regulator. The reference voltage is the REFO1 (1.65V) instead of the GND. If you should mistakenly short the REFO1 with the GND during adjustment, accurate voltage will not be obtained, and the servos misoperation will apply excessive shock to the pickup. To avoid such problems: a. Do not mix up the REFO1 with the GND when connecting the (-) probe of measuring instruments. Especially on an oscilloscope, avoid connecting the (-) probe for CH1 to the GND. b. In many cases, measuring instruments have the same potential as that for the (-) probe. Be sure to set the measuring instruments to the floating state. c. If you have mistakenly connected the REFO1 to the GND, turn off the regulator or the power immediately. Before mounting and removing filters or leads for adjustment, be sure to turn off the regulator. For stable circuit operation, keep the mechanism operating for about one minute or more after the regulator is turned on. In the test mode, any software protections will not work. Avoid applying any mechanical or electrical shock to the mechanism during adjustment. The RFI and RFO signals with a wide frequency range are easy to oscillate. When observing the signals, insert a resistor of 1k ohms in series. The load and eject operation is not guarantied with the mechanism upside down. If the mechanism is blocked due to mistaken eject operation, reset the product or turn off and on the ACC to restore it.
2) Test mode This mode is used to adjust the CD mechanism module. To enter the test mode. While pressing the 4 and 6 keys at the same time, reset. To exit from the test mode. Turn off the ACC and back up. Notes: a. During ejection, do not press any other keys than the EJECT key until the loaded disc is ejected. b. If you have pressed the () key or () key during focus search, turn off the power immediately to protect the actuator from damage caused by the lens stuck. c. For the TR jump modes except 100TR, the track jump operation will continue even if the key is released. d. For the CRG move and 100TR jump modes, the tracking loop will be closed at the same time when the key is released. e. When the power is turned off and on, the jump mode is reset to the single TR (91), the RF amp gain is set to 0dB, and the auto-adjustment values are reset to the default settings.
56
1 2
DEH-P860MP/XN/UC
3 4
- Flow Chart
[KEY] Contents Display [4]+[6]+Reset or [4]+[6]+BU+ACC Test Mode In
[CD]or[SOURCE] Source On
TRK MIN SEC
[BAND] Power On
(T.Offset is adjusted)
TRK 00 MIN00 SEC 00
[3] Power On
(T.Offset is not adjusted)
TRK 99 MIN 99 SEC 99
[] CRG+
TRK *8
[] CRGTRK *8
[2]
Automatic adjustment display switching
TRK *3
91 MIN91 SEC 91
or
TRK
or
TRK
or
TRK
?? MIN?? SEC ??
[6] T.Close
Applicable servomechanism
TRK
[3] RF AGC /
RF AGC coefficient display
TRK ?? MIN ?? SEC ?? SEC
[] CRG+
TRK8x MIN8x SEC8x
[2]
T.Balance adjustment /
T.Balance coefficient display
TRK ?? MIN?? SEC ??
?tr
?min ?sec
?tr
MIN
?min ?sec
or
or
[1] F, T, RF AGC
TRK *7
[]
*4
[]
*4
CRG/TR Jump +
TRK
?? MIN?? SEC ??
?tr
MIN
?min ?sec
SEC
?tr
MIN
?min ?sec
SEC
?tr
MIN
?min ?sec
SEC
?tr
MIN
?min ?sec
*6
SEC
or
TRK
or
*1)
TRK
TYP
MIN SEC
-6dB
TRK 06 MIN 06 SEC 06
-12dB
TRK 12 MIN 12 SEC 12
[Key]
F EQ measurement setting
TRK 02 MIN 02 SEC 02
[BAND] Power On/Off [] [] [1] CRG + / TR Jump + (Direction of the external surface) CRG - / TR Jump (Direction of the internal surface) T.CLS and AGC and Applicable servomechanism / AGC, AGC display switching RF Gain switching / Offset adjustment display / T.Balance adjustment / T.Open F.Close, S.Curve / Rough Servo and RF AGC / F, T, RF AGC SPDL 1X/2X switching As for the double speed (2x), audio output cannot be supported. Error Rate measurement 1st-ON : ERR count beginning(30Sec) 2nd-ON : BER display data[%] F. Mode switching / Tracking Close / CRG, TR Jump switching
*3) F.Offset Display T.Offset Display Switch to the order of the original display
*4) 1TR / 32TR / 100TR *5) Single TR 32TR 100TR CRG Move 9x(8x) : 91(81) 92(82) 93(83) 94(84) *6) Only at the time of CRG Move, 100TR Jump *7) TRK/MIN/SEC F.AGC T.AGC F.Bias RF AGC
1X
TRK 11 MIN 11 SEC 11
As for the double speed (2x), audio output cannot be supported. TYP(2X)
TRK MIN SEC
1X
TRK 11 MIN 11 SEC 11
2X
TRK 22 MIN 22 SEC 22
DEH-P860MP/XN/UC
5 6 7 8
57
Note : The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the PU unit must be changed, the grating should be checked using the procedure below. Purpose : To check that the grating is within an acceptable range when the PU unit is changed.
B
Symptoms of Mal-adjustment : If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform track search operations, or taking a long time for track searching. Method : Measuring Equipment Measuring Points Disc Mode
CD CORE UNIT(S10WMACODE2)
C
L.P.F. REFO1 E VREF 100k 390pF Xch Ych
Oscilloscope
F VREF
F E
Checking Procedure 1. In test mode, load the disc and switch the 3V regulator on. 2. Using the and buttons, move the PU unit to the innermost track. 3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the fourth press. 4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase difference is within 75 . Refer to the photographs supplied to determine the phase angle. 5. If the phase difference is determined to be greater than 75 try changing the PU unit to see if there is any improvement. If, after trying this a number of times, the grating angle does not become less than 75 then the mechanism should be judged to be at fault. Note Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle. Hint Reloading the disc changes the clamp position and may decrease the "wobble".
58
1 2
DEH-P860MP/XN/UC
3 4
Grating waveform
45
60
C
75
90
DEH-P860MP/XN/UC
5 6 7 8
59
If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause(s) of the error is indicated with a corresponding number. This arrangement is intended at reducing nonsense calls from the users and also for facilitating trouble analysis and repair work in servicing.
(1) Basic Indication Method 1) When SERRORM is selected for the CSMOD (CD mode area for the system), error codes are written to DMIN (minutes display area) and DSEC (seconds display area). The same data is written to DMIN and DSEC. DTNO remains in blank as before.
2) Head unit display examples Depending on display capability of LCD used, display will vary as shown below. xx contains the error number. 8-digit display ERRORxx 6-digit display ERRxx 4-digit display Exx
(2) Error Code List Displayed error code Description of the code and potential cause(s) Code Class Electricity Carriage Home NG CRG can't be moved to inner diameter. 10 CRG can't be moved from inner diameter. SERVO LSI ComC
Failure on home switch or CRG move mechanism. Communication error between microcomputer and SERVO LSI. Focusing not available. Stains on rear side of disc or excessive vibrations on REWRITABLE. Spindle not locked. Sub-code is strange (not readable). Failure on spindle, stains or damages on disc, or excessive vibrations. A disc not containing CD-R data is found. Turned over disc are found, though rarely. CD signal error. AGC protection doesn't work. Focus can be easily lost. Damages or stains on disc, or excessive vibrations on REWRITABLE. Failed to reach target address. CRG tracking error or damages on disc. Skip setting for all track. (CD-R/RW) Mechanical error during CD ON. Defective loading motor, mechanical lock and mechanical sensor. Power (VD) is ground faulted. Failure on SW transistor or power supply (failure on connector).
17 30 44 50 A0
System
Power Supply NG
Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors). Unreadable TOC does not constitute an error. An intended operation continues in this case. Upper digits of an error code are subdivided as shown below: 1x: Setup relevant errors, 3x: Search relevant errors, Ax: Other errors.
60
1 2
DEH-P860MP/XN/UC
3 4
- How to check:
1. Set up GGV1168 application. 2. Confirm the LKA file (ent_disp.lka) is converted to LKD file correctly or not. Please see a Readme.txt in the GGV1168 or help file of "OEL Screensaver Studio" for more information.
B
- PCL output
In the normal operation mode (with the detachable panel installed, the ACC switched ON, the standby mode cancelled), shift the TESTIN (Pin 86) terminal to H. The clock signal is output from the PCL terminal (Pin 37). The frequency of the clock signal is 312.500kHz that is one 32nd of the fundamental frequency. The clock signal should be 312.500kHz 13Hz. If the clock signal is out of the range, the X'tal (X601) should be replaced with new one.
DEH-P860MP/XN/UC
5 6 7 8
61
7. GENERAL INFORMATION
7.1 DIAGNOSIS
A
7.1.1 DISASSEMBLY
- Removing the Case (not shown)
1. Remove the two screws and then remove the Case.
CD Mechanism Module
1
B
Fig.1
1 1
Grille Assy
Fig.2
62
1 2
DEH-P860MP/XN/UC
3 4
1 2 3 4
1
Remove the screw.
1 1
Straighten the tabs at three locations indicated. Remove the screw and then remove the Tuner Amp Unit.
Fig.3
1 2 3 4
The Holder hook touches the Sub Grille Assy. The hole A of Lighting Conductor is inserted in the portion shown by the arrow of Sub Grille Assy. The hole B of Lighting Conductor is inserted in the portion shown by the arrow of Sub Grille Assy.
D
A
E
4
F
Knob
Knob
Fig.4
DEH-P860MP/XN/UC
5 6 7 8
63
1. Hold the top and bottom frame. 2. Do not squeeze top frame's front portion too tight, because it is fragile.
Do not squeeze.
64
1 2
DEH-P860MP/XN/UC
3 4
Shorting Solder
Feed Screw
DEH-P860MP/XN/UC
5 6 7 8
65
66 ANTENNA JACK
1
8 5 1 2 4 6 8 10 12 2 3 4 6 7 1 3 5 7 9 11 9 10 11
2
2 1 4 3 6 8 10 12 14 16 5 7 9 11 13 15
DEH-P860MP/XN/UC WIRED REMOTE CONTROL (DEH-P860MP/XN/UC, DEH-P8600MP/XN/UC) 1. FL OUTPUT 2. GND 3. FR OUTPUT 4. GND 5. RL OUTPUT 6. GND 7. RR OUTPUT 8. GND 9. SWL OUTPUT 10. GND 11. SWR OUTPUT 12. GND 1. BACKUP 2. GND 3. ILL 4. B.REM 5. ACC 6. NC 7. NC 8. TEL MUTE 9. RL10. FL11. RL+ 12. FL+ 13. RR14. FR15. RR+ 16. FR+
1. BUS+ 2. GND 3. GND 4. NC 5. BUS6. GND 7. BUS L+ INPUT 8. ASENB 9. BUS R+ INPUT 10. BUS R- INPUT 11. BUS L- INPUT
7.2 IC
A
- Pin Functions(PD5928A)
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35, 36 37 38 39 40 41 42 43 44 45 46 47 48,49 50 51 52 53 Pin Name SYSPW DSPPW DSPOUT DSPIN DSPCK BYTE CNVSS TELIN NC reset XOUT VSS XIN VDD nmi NC NC NC RX2 OELPW NC PEE CSENSOUT brst brxen bsrq RX TX BSO BSI BSCK DSPMOD DPDT KYDT ROT1, 0 PCL SWVDD KEYD FLPILM ILMPW EJTIN GDTC1 NC NC NC gdtc2 NC FOPNSW FCLSSW FLPCLS FLPOPN I/O O O O I O Function and Operation System power control output DSP : Power control output DSP : Data output DSP : Data input DSP : Clock output External data bus width change input Processor mode change input Telephone mute input Not used Reset input Clock output GND Clock input Power supply input Not used Not used Not used Not used IP-BUS : Data input 2 OEL power supply output Not used PEE sound output Flap open/close output P-BUS : Reset output P-BUS : Reception enable input / output P-BUS : Service request input IP-BUS : Data input IP-BUS : Data output P-BUS : Data output P-BUS : Data input P-BUS : Clock output DSP : STD / NW select input Display data output Key data input Rotary encoder pulse input1, 0 Output for clock adjustment GRILLE : Chip enable output Wired remote control input Inside of flap illumination output Illumination output Eject key input Picture rewriting output 1 Not used Not used Not used Picture rewriting output 2 Not used Flap open sense input Flap close sense input Flap motor close output Flap motor open output
I I O I
I O O O O I/O I I O O I O I O I I O O I O O I O
O I I O O
DEH-P860MP/XN/UC
5 6 7 8
67
Pin Name FLPPW NC DSPCS DSPRQ DSPRDY DSPDRDY VCC EVOLCS VSS LRCKOK MCKRQ EMPIN SMODE NC DALMON tunpce@ TUNPCE1 ROMCS ASENS BSENS ROMCK ROMDATA NC INTRST DSPRST IPPW ASENBO isens MODEL1,2 NC MUTE TESTIN NC DSENS KEYAD ASLIN AVSS SL VREF AVCC TUNPDI TUNPDO TUNPCK
I/O O O O I I O I I I I O O O O I I O I/O O O O O I I O I I I I I
I O O
Function and Operation Flap motor driver power ON/OFF output Not used DSP : Interface chip select output DSP : Interface request output DSP : Data write ready signal input DSP : Data read ready signal input Power supply input Electronic volume chip select output GND DSP : Clock stable information input Master clock request input CD emphasis information input Slave / master select input Not used For consumption current reduction output TUNER : Chip enable output(EEPROM) TUNER : Chip enable output(PLL) ROM correction chip select output ACC sense input Back up sense input ROM correction clock output ROM correction data input/output Not used DSP : System reset output DSP : Reset output IPBUS : Driver power supply control output IPBUS : Slave ACC sense output Illumination sense input Model select input Not used System mute output Test program input Not used Detach sense input Wired remote control input ASL input AD translation power supply input terminal TUNER : Signal level input A/D converter reference voltage A/D converter power supply input terminal TUNER : PLL communication data input TUNER : Data output(PLL) TUNER : Clock output(PLL) * NJM4580V
1 100
26
1
A
2 3 4
+
B
6 5
V-
IC's marked by * are MOS type. Be careful in handling them because they are very liable to be damaged by electrostatic induction.
68
1 2
DEH-P860MP/XN/UC
3 4
PCM1742KE
A
1 2 3 4 5 6
System Clock Serial Control Port 4x/8x Oversampling Digital Filter with Function Controller
Enhanced Multilevel Delta-Sigma Modulator
16
Audio Seria Portl DAC Output Amp and Low-Pass Filter
SCK ML MC
B
15 14 13 12 11 10 9
DAC
7 8
System Clock Manager
Zero Detect
HA12240FP
STB 8
BIAS
VCC 7
BUS+ 6
BUSD
+ -
DRIVER OUTPUT
1 S1
2 R
3 S2
DEH-P860MP/XN/UC
5 6 7 8
RECEIVER OUTPUT
COM
4 GND
F
69
- Pin Functions(AK7730VT)
A
Pin Name EESEL JX0/SDIN4A SDIN3, 2/JX1, 2 SDIN1 CKS1 BVSS DVSS DVDD SDOUT4-1 BITCLK_I LRCLK_I BITCLK_O LRCLK_O RDY DRDY cs DVDD DVSS CLKO1, 2 XTO XTI DVSS DVDD SMODE SO SI SCLK rq s_reset init_reset CKS0 LFLT AVSS AVDD VREFH VCOM VREFL AVSS AINRAINR+ AINLAINL+
I/O I I I I I
O I I O O O O I
O O I
I O I I I I I I
I O I I I I I
Function and Operation Control Mode select pin (Pull down) External conditional jump pin / DSP serial data input pin (Pull down) DSP serial data input pin / External condition jump pin (Pull down) DSP serial data input pin (Pull down) Master clock (XTI) select pin (Pull down) Silicon substrate potential 0V Ground pin for digital section 0.0V Power supply pin for digital section 3.3V (typ) DSP Serial data output pin Serial bit clock input pin LR channel select clock input pin Serial bit clock output pin LR channel select clock output pin Data write ready output pin for microcomputer interface Output data ready pin for Microcomputer interface Chip select pin for Microcomputer interface (pull down) Power supply pin for digital section 3.3V (typ) Ground pin for digital section 0V Clock output pin Crystal oscillator output pin Master clock input pin Ground pin for digital section 0V Power supply pin for digital section 3.3V (typ) Slave / Master mode selector pin Serial data output pin for Microcomputer interfaces Microcomputer interface serial data input and serial data output control pin Microcomputer interface serial data clock pin Microcomputer interface write request pin System Reset pin Reset pin (for initialization) Master clock (XTI) select pin (pull down) Filter connection pin for PLL Analog ground 0V Power supply pin for analog section 3.3V (typ) Analog reference voltage input pin Common voltage Analog reference voltage input pin for low-level Analog ground 0V ADC Rch analog inverted input pin ADC Rch analog non-inverted input pin ADC Lch analog inverted input pin ADC Lch analog non-inverted input pin
* AK7730VT 48
E
37 36
12 13
F
25 24
70
1 2
DEH-P860MP/XN/UC
3 4
NJM2112V
NJM2872F05
A
D OUTPUT
C OUTPUT
D +INPUT
C +INPUT
D -INPUT
C -INPUT
GND
VOUT
NOISE BYPASS
14
13
12
11
10
Thermal Protection
Bandgap Reference
1 A OUTPUT
2 A -INPUT
3 A +INPUT
4 V+
5 B +INPUT
6 B -INPUT
7 B OUTPUT
1
VIN
2
GND
3
CONTROL
*S-80835CNMC-B8U
NC 5
NC 4
D
+ VREF
1 OUT
2 VDD
3 VSS
DEH-P860MP/XN/UC
5 6 7 8
71
Pin No. 1 2 3 4 5 6 7 8, 9 10 11 12 13 14 15 16,17 18,19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45-48 49 50 51-59 60 61 62 63-69 70 71-86 87-90 91-93 94 95 96 97 98 99 100
Pin Name romcs flstby FL120N flbusy REM BYTE CNVSS NC reset XOUT VSS1 XIN VCC1 nmi ROT1,ROT2 NC CD_DATA NC CKC NC LS NC CKD DPDT KYDT D1_L NC CLK1 ILMD D0_L NC CLK0 NC ready NC hold NC BCLK rd NC wr cs#-cs) A19 NC A17-9 VCC2 A8 VSS2 A7-1 NC D15-0 kd!-kd$ ks!-ks# AVSS fl!@on VREF AVCC ROMDT NC ROMCK
I/O O O O I I I I I O I I I O O O O I O O I O O I O I I
Format
C C C C N C
C C
O O O O O O O O O I/O I O O
C C C C C C C C C C C C C
I/O O
Function and Operation Not used OPEN Not used OPEN Not used OPEN Flash memory busy input Remote control reception input GND connection GND connection Not used OPEN Pull up Crystal oscillating element connection pin GND connection Crystal oscillating element connection pin VDD connection Pull up Rotary encoder pulse input Not used Cathode driver pulse output Not used OPEN Cathode driver pulse output Not used OPEN Line synchronous signal Not used OPEN Data transfer and driver clock output Display data communication input Key data communication output Display data MSB output Not used UART1 clock input Dual illumination output Display data LSB output Not used UART0 clock input Not used OPEN Not used Pull up Not used OPEN Pull up OPEN Not used Pull up Read strobe output OPEN Not used OPEN External ROM chip select output Address bus 19 output OPEN Address bus 17-9 output VDD connection Address bus 8 output GND connection Address bus 7-0 output OPEN Data bus 15-0 input / output Key data input Key strobe output GND connection Not used OPEN GND connection VCC connection Not used OPEN Not used
72
1 2
DEH-P860MP/XN/UC
3 4
* PD5943A 100 1 76 75
Format C N
25 26 * PD8124A 50
51
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
44 43 42 41 40 39 38 37 36 35
A20 A19 A8 A9 A10 A11 A12 A13 A14 A15 A16 BYTE GND D15 D7
C
* TC7WH32FK
1A 1
8 VCC
:Address input :Data output :Bank address :Chip enable input :Output enable input :Power supply :GND
34 33 32 31 30 29 28 27 26 25 24 23
1B 2
7 1Y
2Y 3
6 2B
GND 4
D14 D6 D13 D5 D12 D4 AVCC
5 2A
DEH-P860MP/XN/UC
5 6 7 8
73
* PD6468A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 A0-A17 DQ0-DQ15 ce oe we RY/by : Address input : Data output : Chip enable input : Output enable input : Write enable input : Ready / Busy output
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25
A16 byte VSS DQ15/A1 DQ7 DQ14 DQ6 DQ13 DQ5 DQ12 DQ4 VCC DQ11 DQ3 DQ10 DQ2 DQ9 DQ1 DQ8 DQ0 oe VSS ce A0
A6 A5 A4 A3 A2 A1
74
1 2
DEH-P860MP/XN/UC
3 4
- Pin Functions(PE5423A)
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35, 36 37 38 39-42 43 44 45 46 47 48 49 50 51 52 53 54 55 56-58 59 60 61 62 63 64 65 Pin Name AVREF AVSS RFOK CLAMP EVDD PWM NC IC/FLMD0 VDD REGC VSS X1 X2 reset XT1 XT2 PULLDOWN ejsw xint NC brst BSI BSO bsck FTXD FRXD BRXEN bsrq dspok DSCSNS(S903) 8EJ(S905) 12EJ(S904) EVSS EVDD SRAMLEVEL0, 1 EMPH emph NC adena LRCKOK SRAMLEVEL2 CD3VON CONT xrst VDCONT ROMDATA ROMCS ROMCK LOEJ CLCONT CDMUTE INT xcs NC xwait CLKOUT LOCK NC xwrite I/O Format Function and Operation A power supply Positive power supply(5V) A power supply GND Output of state of RFOK CLAMP SW sense input E power supply Positive power supply For changer(PWM) Not used IC : VSS direct connection/FLMOD0 : Pull-down Positive power supply(5V) Connected to the capacity stabilizing output of the regulator GND Oscillator connection for mainclock Oscillator connection for mainclock System reset input Connected to the oscillator for subclock (connected to VSS via the resistor) Connected to the oscillator for subclock(Open) Connected to EVDD or EVSS via the resistor Eject key input CD LSI interruption signal input Not used P-Bus reset input P-Bus serial data input P-Bus serial data output P-Bus serial clock input/output For flash rewriting(transmitted signal) For flash rewriting(received signal) It is possible to receive P-Bus P-Bus service request demand DSP microcomputer initialization OK input Disc state sense input Input of detection of 8 cm disc ejection Input of detection of 12 cm disc ejection E power supply GND E power supply Positive power supply SRAM level meter output Emphasis information output Emphasis information output Not used A/D reference voltage supply control output (DOUT mute output) SRAM level meter output CD +3.3V power supply control output Servo driver power supply control output CD LSI reset control output VD power supply control output E2PROM data input/output E2PROM chip selection output E2PROM clock output The direction change output of LOAD/EJECT Driver input change output CD mute control output For changer(Interruption at the edge) CD LSI chip selection output Not used CD LSI write control signal output Internal system clock output(Open) Spindle lock input Not used CD LSI write control signal output
A
O I
C C
I I I
I I
C C
C /C C /C /C
O O O O O O O O O O I/O O O O O O O I O I O
C C C C C C C C C C /C C C C C C C
DEH-P860MP/XN/UC
5 6 7 8
75
Pin Name NC xread XASTB BVSS BVDD AD0-15 NC A/D csens TYPE_A/D testin HOME TEMP VDSENS NC
I/O O O
Format
I/O
/C
I I I I
Function and Operation Not used CD LSI read control signal output CD LSI address strobe output B power supply GND B power supply Positive power supply Address/data Bus 0-15 Not used For changer(A/D) Flap closing sense input CD-DA analog/digital output change setup Chip check test program starting input Home SW sense input Temperature information sense input VD power supply short sense input Not used
76
C
100
76
1 2
DEH-P860MP/XN/UC
3 4
- Pin Functions(UPD63761GJ)
Pin No. 1 2 3 4-8 9-16 17 18 19 20 21 22 23, 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39-41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73-88 89-99 Pin Name D.VDD D1.GND reset AB12-8 AD7-0 cs ASTB read write wait INTQ IFMODE0, 1 D1.VDD DA.VDD ROUT DA.GND REGC DA.GND LOUT DA.VDD X.VDD XTAL xtal X.GND VDDREG15 PWMSW0 TEST3-1 PWMSW1 TESTEN D1.GND DIN DOUT SCKIN SCKO LRCKIN LRCK xtalen D1.VDD RFCK/HOLD WFCK/MIRR PLCK LOCK/RFOK C1D1/C8M C1D2/C16M C2D1/RMUTE C2D2/LMUTE C2D3/SHOCK D1.GND C33M (rcs) RA11 (CKE) ras cas)(LDQM) cas!(UDQM) we oe(cas) D.GND RDB0-15 RA0-10 I/O Function and Operation Power supply for digital circuits GND for 1.6V digital circuits Input of reset Address bus 12-8 from the microcomputer Address/data bus 7-0 to the microcomputer Chip selection Address strobe Control signals(read) Control signals(write) Control signals(wait) Interruption signals to the external microcomputer Switching the microcomputer I/F 0, 1 Power supply for 1.6V digital circuits Power supply for DAC Output of audio for the right channel GND for DAC Connected to the capacitor for band gap GND for DAC Output of audio for the left channel Power supply for DAC Power supply for the crystal oscillator Connected to the crystal oscillator(16.9344MHz) Connected to the crystal oscillator(16.9344MHz) Ground for the crystal oscillator Control of 1.6V regulator Setup 0 for PWM output(SD, MD) Connected to GND Setup 1 for PWM output(FD, TD) Connected to GND GND for 1.6V digital circuits Input of audio data Output of audio data Clock input for audio data Clock output for audio data Input of LRCK for audio data Output LRCK for audio data Permission to oscillate 16.9344MHz Power supply for 1.6V digital circuits Output of RFCK/HOLD signal Output of WFCK/MIRR signal Output of PLCK Output of LRCK/Output of RFOK Information on error correction/C8M : 8MHz Information on error correction/C16M : 16MHz Information on error correction/Mute for Rch Information on error correction/Mute for Lch Information on error correction/Detection of vibration GND for 1.6V digital circuits Output of 33.8688MHz(CLK for SDRAM) DRAM cs Output of DRAM address 11 Output of DRAM CKE Output of DRAM ras Output of DRAM lower cas(LDQM) Output of DRAM upper cas(UDQM) Output of DRAM we Output of DRAM oe(cas) Ground for digital circuits Input/output of DRAM data0-15 Output of DRAM address0-10
A
I I I/O I I I I O O I
I O
I I I I I O I O I O I O O O O O O O O O O O O O O O O O O I/O O
DEH-P860MP/XN/UC
5 6 7 8
77
Pin No. 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120, 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144
Pin Name D.VDD FD+ FDTD+ TDSD+ SDMD+ MDREFOUTSV AD.VDD EFM ASY ATEST RFI AD.GND AGCO C3T AGCI RFO EQ2, 1 RF2RFA.GND A C B D F E VREFIN A.VDD REFOUT REFC FEFEO ADIN TETEO TE2 TEC LD PD D.GND
I/O O O O O O O O O O O I O I O O I O I I I I I I I I I I O I I O I I O O I O I
Function and Operation Power supply for digital circuits Output of focus drive PWM + Output of focus drive PWM Output of tracking drive PWM + Output of tracking drive PWM Output of thread drive PWM + Output of thread drive PWM Output of spindle drive PWM + Output of spindle drive PWM REFOUT for servo Power supply for ADC Output of EFM signals Input of asymmetry Analog tests Input of RF Ground for the analog system Output of RF Connection to the capacitor for detecting 3T Input of AGC Output of RF(AGC) Equalizer 2, 1 Reversal input of RF2 Reversal input of RF Ground for the analog system Input of A Input of C Input of B Input of D Input of F Input of E Input of reference voltage Power supply for the analog system Output of reference voltage Connected to the capacitor for output of REFOUT Reversal input of FE Output of FE Input of FE, TE A/D converter Reversal input of TE Output of TE TE2 TEC Output of LD Input of PD Ground for digital circuits * S-812C33AUA-C2N 73 72
* UPD63761GJ
E
109
108
Reference Voltage
1 VSS
2 VIN
3 VOUT
144
F
37 1 36
78
1 2
DEH-P860MP/XN/UC
3 4
- Pin Functions(BA5835FM)
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Pin Name VR OPIN2(+) OPIN2(-) OPOUT2 OPIN1(+) OPIN1(-) OPOUT1 GND MUTE POWVCC1 VO1(-) VO1(+) VO2(-) VO2(+) VO3(+) VO3(-) VO4(+) VO4(-) POWVCC2 GND CNT LDIN OPOUTSL OPINLSL OPOUT3 OPIN3(-) OPIN3(+) PREVCC Function and Operation Input pin for reference voltage Input pin for non-inverting input for CH2 preamplifier Input pin for inverting input for CH2 preamplifier Output pin for CH2 preamplifier Input pin for non-inverting input for CH1 preamplifier Input pin for inverting input from CH1 preamplifier Output pin for CH1 preamplifier Ground pin Mute control pin Power supply pin for CH1, CH2, and CH3 at "Power" stage Driver CH1 - Negative output Driver CH2 - Positive output Driver CH2 - Negative output Driver CH2 - Positive output Driver CH2 - Positive output Driver CH2 - Negative output Driver CH4 - Positive output Driver CH4 - Negative output Power supply pin for CH4 at "Power" stage Ground pin Control pin Loading input Output pin for preamplifier for thread Input pin for preamplifier for thread CH3 preamplifier output pin Input pin for inverting input for CH3 preamplifier Input pin for non-inverting input for CH3 preamplifier PreVcc
A
BA5835FM 14 1
D
15 * S-L2980A15MC-C6A VOUT
28
NC
4
E
1
VIN
2
VSS
3
ON/OFF
F
DEH-P860MP/XN/UC
5 6 7 8
79
13
ROM_VDD
5
SL
10 9 8
DI CE1 CK
11
NC
14
DO
18 19 20 21
NC NC NC NC
5V
OSC
LPF
AM ANT 1 ATT
T51
CF52 CF51
AUDIOGND
OSCGND
VDD_3.3
RFGND
DGND
3.3V
12
15
22
16
VCC
NC
17
2 3 4 5 6 7
D
I O I I I I I
RF ground FM antenna input power supply signal level chip enable-2 write control chip enable-1 clock data in non connection osc ground power supply data out digital ground non connection power supply non connection non connection non connection non connection audio ground L channel output R channel output
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
AM antenna input high impedance AMANT pin is connected with an all antenna by way of 4.7H. (LAU type inductor) A series circuit including an inductor and a resistor is connected with RF ground for the countermeasure against the hum of power transmission line. Ground of antenna block Input of FM antenna 75 Surge absorber(DSP-201M-S00B) is necessary. The power supply for analog block. D.C 8.4V 0.3V Output of FM/AM signals level Chip enable for EEPROM Low active You can write EEPROM, when EEPROM write control is Low. Ordinary non connection Chip enable for AFRF High active Clock Data input Not used Ground of oscillator block Power supply for EEPROM pin 13 is connected with a power supply of micro computer. Data output Ground of digital block Not used The power supply for digital block. 3.3V 0.2V Not used Not used Not used Not used Ground of audio block FM stereo L-ch signal output or AM audio output FM stereo R-ch signal output or AM audio output
80
1 2
DEH-P860MP/XN/UC
3 4
IC 3 EEPROM 5.0V
IC 5 3.3V
24
23
bsens Pin 73 bsens=L asens Pin 72 asens=L dsens Pin 91 1.5V < DSENS < 4.5V ASENBOH Pin 80
C B
300ms
300ms
D
In case of the above signal, the communication with Grille microcomputer may fail. If the time interval is not 300msec, the oscillator may be defective.
Source ON
SYSPWH Pin 1
DEH-P860MP/XN/UC
5 6 7 8
81
7.4 CLEANING
A
Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools: Portions to be cleaned CD pickup lenses Cleaning tools Cleaning liquid : GEM1004 Cleaning paper : GED-008
82
1 2
DEH-P860MP/XN/UC
3 4
8. OPERATIONS
A
DEH-P860MP/XN/UC
5 6 7 8
83
84
1 2
DEH-P860MP/XN/UC
3 4
DEH-P860MP/XN/UC
5 6 7 8
85
86
1
Connecting cords with RCA pin plugs (sold separately) Power amp (sold separately) 15 cm (5-7/8 in.) This product Antenna jack IP-BUS input (Blue) 15 cm (5-7/8 in.) Front output (HIGH/FRONT OUTPUT) 23 cm (9 in.) Subwoofer output DSP switch (LOW/SUBWOOFER OUTPUT) Switch the DSP switch as illustration below. Rear output (MID/REAR OUTPUT) Power amp (sold separately) Power amp (sold separately) IP-BUS cable Multi-CD player (sold separately) Blue/white To system control terminal of the power amp or Auto-antenna relay control terminal (max. 300 mA 12 V DC). + Front speaker System remote control
- CONNECTION DIAGRAM(DEH-P860MP/XN/UC)
1
Jack for the Wired Remote Control Refer to Wired Remote Controls manual (sold separately). + Front speaker Fuse holder + Front speaker White/black Left Fuse resistor Rear speaker + Green/black Fuse resistor + Rear speaker + Violet/black Green Gray/black Violet + Rear speaker Right White Gray + Front speaker With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. Rear speaker + Subwoofer + Subwoofer Perform these connections when using the optional amplifier.
DEH-P860MP/XN/UC
Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.
Yellow To terminal always supplied with power regardless of ignition switch position.
23 cm (9 in.) Subwoofer output (SUBWOOFER OUTPUT) 15 cm (5-7/8 in.) This product Antenna jack IP-BUS input (Blue) 15 cm (5-7/8 in.) Front output (FRONT OUTPUT) Rear output (REAR OUTPUT)
Connecting cords with RCA pin plugs (sold separately) Power amp (sold separately) Power amp (sold separately)
- CONNECTION DIAGRAM(DEH-P8600MP/XN/UC)
5
IP-BUS cable Jack for the Wired Remote Control Refer to Wired Remote Controls manual (sold separately). Multi-CD player (sold separately) Blue/white To system control terminal of the power amp or Auto-antenna relay control terminal (max. 300 mA 12 V DC). + Front speaker System remote control + Front speaker Fuse holder + Front speaker Left Fuse resistor Rear speaker + Green/black Fuse resistor + Rear speaker + Violet/black White/black Green Gray/black Violet + Rear speaker Right White Gray + Front speaker With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. Perform these connections when using the optional amplifier. Rear speaker + Subwoofer + Subwoofer
6 E D C
DEH-P860MP/XN/UC
Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.
Yellow To terminal always supplied with power regardless of ignition switch position.
8 A B
87
88
17. Connecting cords with RCA pin plugs (sold separately) 7. Subwoofer output (LOW/SUBWOOFER OUTPUT) 23 cm 8. Rear output (MID/REAR OUTPUT) 3. DSP switch Switch the DSP switch as illustration below. 2. This product 1. Antenna jack 4. IP-BUS input (Blue) 15 cm 9. Front output (HIGH/FRONT OUTPUT) 18. Power amp (sold separately) 18. Power amp (sold separately)
- CONNECTION DIAGRAM(DEH-P8650MP/XN/ES)
1
15 cm 18. Power amp (sold separately) 6. IP-BUS cable 19. Blue/white To system control terminal of the power amp or Auto-antenna relay control terminal (max. 300 mA 12 V DC). 5. Multi-CD player (sold separately) 20. System remote control + 21. Front speaker + 21. Front speaker 12. Fuse holder + 21. Front speaker 23. White/black 26. Left 14. Fuse resistor 28. Rear speaker + 30. Green/black 14. Fuse resistor + + 32. Violet/black 29. Green 25. Gray/black 31. Violet + 27. Right 28. Rear speaker 22. White 24. Gray + 21. Front speaker 28. Rear speaker 28. Rear speaker 34. With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. + 33. Subwoofer + 33. Subwoofer 35. Perform these connections when using the optional amplifier.
DEH-P860MP/XN/UC
10. Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.
11. Yellow To terminal always supplied with power regardless of ignition switch position.
13. Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF.
DEH-P860MP/XN/UC
5 6 7 8
89
- Jigs List
A
Name Test Disc L.P.F. Extension Cable Extension PCB CD-ROM Cleaning liquid Cleaning paper
Remarks Checking g the g grating g Checking g the g grating g( (Two pieces) ) Checking g the keyboard y unit Checking g the keyboard y unit OEL screensaver studio lka to lkd application Cleaning CD pickup lenses Cleaning CD pickup lenses
90
1 2
DEH-P860MP/XN/UC
3 4