You are on page 1of 22

ADVANCE PRODUCT DATA

Air-Cooled Liquid Chillers

30XA 252-1702
Nominal cooling capacity 270 - 1700 kW
The Aquaforce liquid chillers are the premium solution for industrial and commercial applications where installers, consultants and building owners require optimal performances and maximum quality. The Aquaforce liquid chillers are designed to meet current and future requirements in terms of energy efficiency and operating sound levels. They use the best technologies available today: - Twin-rotor screw compressors with a variable capacity valve. - Pure R134a refrigerant. - Low-noise generation IV Flying Bird fans made of composite material. - Micro-channel heat exchangers (MCHX). - Touch-screen Pro-Dialog control system. To meet to all environmental and economic requirements, the Aquaforce is available in two versions : One offers an extremely low noise level while at the same time boasting superior energy efficiency. The other offers unequalled energy efficiency to satisfy the most stringent demands of building owners wanting to reduce operating costs to the minimum. This version is also used for applications in geographical zones where the air temperature is very high. Features and advantages Very economical operation Extremely high full load and part load energy efficiency: - Average EER of 3.20 kW/kW (high-efficiency option) - Average integrated part load value (IPLV) of 4.20 kW/kW (high-efficiency option) - New twin-rotor screw compressor equipped with a highefficiency motor and a variable capacity valve that permits exact matching of the cooling capacity to the load. - All aluminium heat exchanger with micro-channels that is more efficient than a copper/aluminium coil. - Flooded multi-pipe evaporator. - Electronic expansion device permitting operation at a lower condensing pressure and improved utilisation of the evaporator heat exchange surface (superheat control). - Economizer system with electronic expansion device for increased cooling capacity Low operating sound levels Compressors - Discharge dampers integrated in the oil separator (Carrier patent). - Suction piping with flexible connections to prevent noise and vibration transmission. - Acoustic compressor and oil separator enclosure reducing radiated noise. Condenser section - Condenser coils in V-shape with an open angle, allowing quieter air flow across the coil.

- Low-noise 4th generation Flying Bird fans, made of a composite material (Carrier patent) are now even quieter and do not generate intrusive low-frequency noise. - Rigid fan mounting preventing start-up noise (Carrier patent).

- Transport simulation test in the laboratory on a vibrating table. The test is based on a military standard and equivalent to 4000 km by truck. - Salt mist corrosion resistance test in the laboratory for increased corrosion resistance. Pro-Dialog control Pro-Dialog Plus combines intelligence with operating simplicity. The control constantly monitors all machine parameters and precisely manages the operation of compressors, electronic expansion devices, fans and of the evaporator water pump for optimum energy efficiency.

Easy and fast installation Integrated hydronic module (option) - Centrifugal low or high-pressure water pump (as required), based on the pressure loss of the hydronic installation. - Single or dual pump (as required) with operating time balancing and automatic changeover to the back-up pump if a fault develops. - Water filter protecting the water pump against circulating debris - High-capacity membrane expansion tank ensures pressurisation of the water circuit. - Thermal insulation and aluminium protection. - Pressure gauge to check filter pollution and measure the system water flow rate. - Water flow control valve. Simplified electrical connections - Main disconnect switch with high trip capacity. - Safe 24 V control circuit. Fast commissioning - Systematic factory operation test before shipment. - Quick-test function for step-by-step verification of the instruments, expansion devices, fans and compressors.

Energy management - Internal time schedule clock: controls chiller on/off times and operation at a second set-point. - Set-point reset based on the outside air temperature or the return water temperature. - Master/slave control of two chillers operating in parallel with operating time equalisation and automatic changeover in case of a unit fault. Ease-of-use - User interface with large touch screen (120 x 99 mm) for intuitive access to the operating parameters. The information is in clear text and can be displayed in local language (please contact your distributor).

Environmental care R134a refrigerant - Refrigerant of the HFC group with zero ozone depletion potential. - 30% reduction in the refrigerant charge through the use of micro-channel heat exchangers. Leak-tight refrigerant circuit - Reduction of leaks as no capillary tubes and flare connections are used. - Verification of pressure transducers and temperature sensors without transferring refrigerant charge. - Discharge shut-off valve and liquid line service valve for simplified maintenance.

Absolute reliability Screw compressors - Industrial-type screw compressors with oversized bearings and motor cooled by suction gas. - All compressor components are easily accessible on site minimising down-time. - Protection increased by an electronic board. All aluminium micro-channel heat exchanger - Corrosion resistance five times higher than for a traditional coil. The all aluminium design eliminates the formation of galvanic currents between aluminium and copper that cause coil corrosion in saline or corrosive environments. Auto-adaptive control - Control algorithm prevents excessive compressor cycling (Carrier patent). - Automatic compressor unloading in case of abnormally high condensing pressure. If condenser coil fouling or fan failure occurs, the Aquaforce continues to operate, but at reduced capacity. Exceptional endurance tests - Partnership with specialised laboratories and use of limit simulation tools (finite element calculation) for the design of critical components.

Remote management (standard) Aquaforce is equipped with an RS485 serial port that offers multiple remote control, monitoring and diagnostic possibilities. Carrier offers a vast choice of control products, specially designed to control, manage and supervise the operation of an air conditioning system. Please consult your Carrier representative for more information. Aquaforce also communicates with other building management systems via optional communication gateways. A connection terminal allows remote control of the Aquaforce by wired cable: - Start/stop: opening of this contact will shut down the unit - Dual set-point: closing of this contact activates a second set-point (example: unoccupied mode). - Demand limit: closing of this contact limits the maximum chiller capacity to a predefined value. - User safety: this contact is connected in series with the water flow switch and can be used for any customer safety loop. - Heat reclaim (option): closing of this contact allows heat reclaim mode operation. - Water pump 1 and 2 control*: these outputs control the contactors of one or two evaporator water pumps. - Water pump on reversal*: these contacts are used to detect a water pump operation fault and automatically change over to the other pump. - Operation indication: this volt-free contact indicates that the chiller is operating (cooling load) or that it is ready to operate (no cooling load). - Alert indication: this volt-free contact indicates the presence of a minor fault. - Alarm indication: this volt-free contact indicates the presence of a major fault that has led to the shut-down of one or two refrigerant circuits. * not available for units with the hydronic module option. Remote management (EMM option) The Energy Management Module offers extended remote control possibilities: - Room temperature: permits set-point reset based on the building indoor air temperature (with Carrier thermostat). - Set point reset: ensures reset of the cooling set-point based on a 4-20 mA or 0-5 V signal.

- Demand limit: permits limitation of the maximum chiller demand based on a 0-10 V signal. - Demand limit 1 and 2: closing of these contacts limits the maximum chiller capacity to two predefined values. - User safety: this contact can be used for any customer safety loop; opening of the contact generates a specific alarm. - Ice storage end: when ice storage has finished, this input permits return to the second set-point (unoccupied mode) - Time schedule override: closing of this contact cancels the time schedule effects.

- Out of service: this signal indicates that the chiller is completely out of service. - Chiller capacity: this analogue output (0-10 V) gives an immediate indication of the chiller capacity.

06T screw compressor

New generation screw compressor The new generation of the Carrier 06T screw compressors benefits from Carrier's long experience in the development of twin-rotor screw compressors. The compressor is equipped with bearings with oversized rollers, oil pressure lubricated for reliable and durable operation, even at maximum load. A variable control valve controlled by the oil pressure permits infinitely variable cooling capacity. This system allows optimal adjustment of the compressor cooling capacity and ensures exceptionally high stability of the chilled water leaving temperature. Another advantage: if a fault occurs e.g. if the condenser is fouled or at very high outside temperature, the compressor

does not switch off, but continues operation with a reduced capacity. The compressor is equipped with a separate oil separator that minimises the amount of oil in circulation in the refrigerant circuit and considerably reduces discharge gas pulsations for much quieter operation.

All aluminium micro-channel heat exchanger

All aluminium micro-channel heat exchanger (MCHX) Already utilised in the automobile and aeronautical industries for many years, the MCHX used in the Aquaforce is entirely made of aluminium. This one-piece concept significantly increases its corrosion resistance by eliminating the galvanic currents that are created when two different metals (copper and aluminium) come into contact in traditional heat exchangers.

The MCHX heat exchanger is approximately 10% more efficient than a traditional coil and allows a 30% reduction in the amount of refrigerant used in the chiller. The low thickness of the MCHX reduces air pressure losses by 50% and makes it less susceptible to fouling (e.g. by sand) than a traditional coil. Cleaning of the MCHX heat exchanger is very fast using a high-pressure washer.

Touch screen Pro-Dialog operator interface

Options and accessories


Options Grilles Electronic starter Winter operation Suction valve High energy efficiency, high ambient temperature Unit without enclosure Energy Management module EMM One-pass evaporator Three-pass evaporator Low pressure single-pump hydronic module Low-pressure dual-pump hydronic module High-pressure single-pump hydronic module High-pressure dual-pump hydronic module Traditional coils Corrosion protection traditional coils Corrosion protection traditional coils Evaporator frost protection Evaporator and hydronic module frost protection IP 54 control box High-temperature version (Middle East) Insulation, suction piping JBus gateway BacNet gateway LON gateway n 23 25 28 92 119 253 156 100C 100A 116F 116G 116B 116C 254 2B 3A 41A 41B 21 255 256 148B 148C 148D Description Metallic grilles on all four unit faces Electronic starter on each compressor Fan speed control via frequency converter Shut-off valves on the compressor suction piping Improved condenser performance Compressors not equipped with acoustic enclosure See chapter "Energy Management Module" Evaporator with one pass water-side Evaporator with three passes water-side See hydronic module chapter See hydronic module chapter See hydronic module chapter See hydronic module chapter Coils made of copper tubes with aluminium fins Factory application of Blygold Polual treatment on the copper/aluminium coils Fins made of pre-treated aluminium (polyurethane and epoxy) Resistance heater on the evaporator Resistance heater on the evaporator and the hydronic module Increased leak tightness of control boxes Special copper/aluminium coils and increased leak tightness of the control box Heat insulation on the compressor suction piping with aluminium sheet finish Two-directional communications board, complies with JBus protocol Two-directional communications board, complies with BacNet protocol Two-directional communications board, complies with LON protocol Improved corrosion resistance, recommended for urban, industrial and rural environments Improved corrosion resistance, recommended for marine environments Evaporator frost protection down to -25C outside temperature Evaporator and hydronic module frost protection down to -25C outside temperature Increased control box protection against dusty operating environments Recommended for extreme environments: high temperature, sand storms Improved aesthetics Easy connection by communication bus to a building management system Easy connection by communication bus to a building management system Easy connection by communication bus to a building management system Advantages Improved aesthetics Reduced start-up current Stable unit operation when the air temperature is between -10C and -20C Simplified maintenance Energy cost reduction, full load operation at higher air temperatures More economical Easy connection by wired connection to a building management system Reduced water inlet and outlet pressure losses on opposite sides Increased water inlet and outlet pressure losses on opposite sides Easy and fast installation Easy and fast installation, operating safety Easy and fast installation Easy and fast installation, operating safety Use 30XA 252-1702 30XA 252-1702 30XA 252-1702 30XA 252-1702 30XA 252-1702 30XA 252-1702 30XA 252-1702 30XA 252-1002 30XA 252-1002 30XA 252-502 30XA 252-502 30XA 252-502 30XA 252-502 30XA 252-1702 30XA 252-1702 option 254 30XA 252-1702 option 254 30XA 252-1702 30XA 252-502 30XA 252-1702 30XA 252-1702 30XA 252-1702 30XA 252-1702 30XA 252-1702 30XA 252-1702

Sound levels
30XA Standard low-noise unit Sound power level (10-12 W)* Sound pressure level at 10 m** High efficiency/temperature unit (option) Sound power level (10-12 W)* Sound pressure level at 10 m** dB(A) dB(A) 94 62 94 62 94 62 95 63 95 63 96 63 96 64 96 64 97 64 97 64 dB(A) dB(A) 90 58 90 58 90 58 91 59 91 59 92 59 92 59 92 59 93 60 93 60 252 302 352 402 452 502 602 702 752 802

30XA Standard low-noise unit Sound power level (10-12 W)* Sound pressure level at 10 m** High efficiency/temperature unit (option) Sound power level (10-12 W)* Sound pressure level at 10 m** dB(A) dB(A) dB(A) dB(A)

852 93 61 97 65

902 94 61 98 65

1002 94 61 98 65

1102 95 61 99 66

1202 95 62 99 66

1302 95 62 99 66

1352 96 62 99 66

1402 96 63 100 67

1502 96 63 100 67

1702 96 63 100 67

* In accordance with ISO 9614-1 and certified by Eurovent. ** Average sound pressure level, unit in a free field on a reflective surface.

Operating limits
Evaporator water temperature
C Water entering temperature at start-up Water entering temperature during operation Water leaving temperature during operation Minimum 6,8 4 Maximum 45 21 15

Note: If the air temperature is below 4C, a glycol/water solution or the frost protection option must be used.

Condenser air temperature


C Storage Operation Standard unit With winter operation option (No. 28) Operation Standard low-noise unit High efficiency/temperature unit (option) Minimum -20 -10 -20 Maximum 68 46* 55**

Note: If the air temperature is below 3C, a glycol/water solution or the frost protection option must be used. * Full or part-load operation, depending on the model ** Part-load operation

Physical data
30XA Nominal cooling capacity* Standard low-noise unit High efficiency/temperature unit (option) Operating weight** Standard low-noise unit Copper/aluminium coil (option 254) Refrigerant Circuit A Circuit B Circuit A copper/aluminium coil (option 254) Circuit B copper/aluminium coil (option 254) Compressors Circuit A Circuit B Minimum capacity Control Condensers Fans Quantity Standard unit Copper/aluminium coil (option 254)) Evaporator Water content Maximum operating pressure Water connections Diameter Outside diameter l kPa in mm kW kW kg kg kg kg kg kg 252 260 264 3551 3871 R134A 36 38 60 64 302 283 289 3597 3903 37 38 55 56 352 303 314 3632 4427 37 39 70 56 402 384 389 4454 4865 53 37 85 56 452 439 447 4524 4931 54 39 85 56 502 493 503 4992 5499 63 39 102 56 1 1 10 602 597 613 5868 6474 62 62 102 88 1 1 14 702 655 673 6022 6641 62 66 102 105 1 1 15 752 697 717 6304 7402 70 62 110 88 1 1 11 802 750 780 6601 7716 70 62 112 98 1 1 13

06T semi-hermetic screw compressors, 50 r/s 1 1 1 1 1 1 1 1 1 1 15 14 15 11 11 PRO-DIALOG, electronic expansion valve (EXV) Aluminium micro-channel heat exchanger FLYING BIRD IV 6 6 6 6 6 7 8 8 66 1000 5 141,3 8 8 70 1000 5 141,3

9 9 77 1000 5 141,3

11 11 79 1000 5 141,3

12 12 94 1000 6 168,3

12 13 98 1000 6 168,3

12 13 119 1000 6 168,3

Flooded multi-pipe type 58 61 61 1000 1000 1000 Victaulic 5 5 141,3 141,3 5 141,3

30XA Nominal cooling capacity* Standard low-noise unit High efficiency/temperature unit (option) Operating weight** Standard low-noise unit Copper/aluminium coil (option 254) Refrigerant Circuit A Circuit B Circuit C Circuit D Circuit A copper/aluminium coil (option 254) Circuit B copper/aluminium coil (option 254) Circuit C copper/aluminium coil (option 254) Circuit D copper/aluminium coil (option 254) Compressors Circuit A Circuit B Circuit C Circuit D Minimum capacity Control Condensers Fans Quantity Standard unit Copper/aluminium coil (option 254) Evaporator Water content Maximum operating pressure Water connections Diameter, inlet/outlet Outside diameter, inlet/outlet l kPa in mm kW kW

852 804 828

902 854 884

1002 956 989

1102 1059 1089

1202 1156 1191

1302 1245 1292

1352 1314 1368

1402 1379 1420

1502 1427 1474

1702 1604 1692

kg kg kg kg kg kg kg kg kg kg

7137 7842 R134A 77 66 120 98 -

7419 8590 70 75 110 110 -

8022 8836 77 84 130 125 -

9847 10877 62 62 84 102 96 120 -

10282 11294 70 62 84 112 96 120 -

10665 11650 70 87 84 110 96 120 1 1 1 7

10996 12018 70 63 80 110 105 120 1 1 1 9

12011 13207 85 75 84 130 110 120 1 1 1 9

12155 13365 77 84 84 130 125 120 1 1 1 10

14279 15689 77 66 77 66 120 98 120 98 1 1 1 1 6

06T semi-hermetic screw compressors, 50 r/s 1 1 1 1 1 1 1 1 1 1 1 1 12 15 15 7 7 PRO-DIALOG, electronic expansion valve (EXV) Aluminium micro-channel heat exchanger FLYING BIRD IV 14 14 14 15 16 16 19 19 168 1000 6 168,3 20 20 182 1000 6 168,3

20 20 203 1000 6 168,3

20 20 224 1000 6/8 168,3/ 219,1

24 24 230 1000 6/8 168,3/ 219,1

24 24 240 1000 6/8 168,3/ 219,1

28 28 240 1000 6 168,3

Flooded multi-pipe type 119 130 140 1000 1000 1000 Victaulic 6 6 168,3 168,3 8 219,1

* Nominal conditions: evaporator entering/leaving water temperature = 12C/7C. Outdoor air temperature = 35C Evaporator fouling factor = 0.000018 m2 K/W ** Weights are guidelines only. Note: The 30XA 1402-1702 units are delivered in 2 modules for field assembly.

Electrical data
30XA Power circuit Nominal power supply Voltage range Maximum supply cable section Circuits A+B Short circuit holding current Circuits A+B Control circuit Standard low-noise unit Maximum start-up current* Circuits A+B Maximum Cosine Phi* Nominal start-up current** circuits A+B Nominal Cosine Phi** Maximum power input Circuits A+B Nominal unit current draw Circuits A+B Maximum unit current draw*** Circuits A+B Maximum unit current draw**** Circuits A+B High-efficiency/temperature unit (option) Maximum start-up current* Circuits A+B Maximum Cosine Phi* Nominal start-up current** Circuits A+B Nominal Cosinus Phi** Maximum power input Circuits A+B Nominal unit current draw Circuits A+B Maximum unit current draw*** Circuits A+B Maximum unit current draw Circuits A+B A 289 0,87 263 0,84 123 158 204 215 289 0,88 263 0,84 138 176 227 239 313 0,88 281 0,84 152 193 250 263 429 0,88 404 0,84 175 222 287 302 538 0,87 507 0,84 196 252 326 343 542 0,88 510 0,84 216 275 355 374 622 0,88 571 0,84 263 334 432 454 654 0,88 595 0,84 281 357 461 486 825 0,87 774 0,84 314 404 522 549 853 0,87 794 0,84 330 424 548 577 A 278 0,87 253 0,84 117 150 194 204 278 0,88 253 0,84 132 168 217 228 302 0,88 270 0,84 146 185 239 252 415 0,88 390 0,84 167 212 274 288 524 0,87 492 0,84 188 242 312 329 526 0,88 494 0,84 207 263 340 358 603 0,88 552 0,84 251 319 413 435 632 0,88 574 0,84 268 341 441 464 804 0,87 753 0,84 302 388 501 528 831 0,87 773 0,84 317 408 527 555 252 V-ph-Hz 400-3-50 V 360-440 mm2 1*240/ 2*150 38 1*240/ 2*150 38 1*240/ 2*185 38 2*240 2*240 2*240 3*240 3*240 4*240 4*240 302 352 402 452 502 602 702 752 802

kA rms

38

38

38

50

50

50

50

24V via internal transformer

kW A A A

kW A A A

Legend: * Power input of the compressor(s) + fan(s) at maximum unit operating conditions. ** Nominal unit current draw at nominal conditions: evaporator entering/leaving voltage. *** Maximum unit operating current at maximum unit operating conditions and nominal voltage. **** Maximum unit operating current: this value is generally obtained at the nominal voltage minus 5%.

Electrical data
30XA Power circuit Nominal power supply Voltage range Maximum supply cable section Circuits A+B Circuits C+D Short circuit holding current Circuits A+B Circuits C+D Control circuit Standard low-noise unit Maximum start-up current* Circuits A+B Circuits C+D Maximum Cosine Phi* Nominal start-up current** Circuits A+B Circuits C+D Nominal Cosine Phi** Maximum power input Circuits A+B Circuits C+D Nominal unit current draw Circuits A+B Circuits C+D Maximum unit current draw*** Circuits A+B Circuits C+D Maximum unit current draw**** Circuits A+B Circuits C+D High-efficiency/temperature unit (option) Maximum start-up current* Circuits A+B Circuits C+D Maximum Cosine Phi* Nominal start-up current** Circuits A+B Circuits C+D Nominal Cosine Phi** Maximum power input Circuits A+B Circuits C+D Nominal unit current draw Circuits A+B Circuits C+D Maximum unit current draw*** Circuits A+B Circuits C+D Maximum unit current draw Circuits A+B Circuits C+D A A 860 0,88 802 0,84 370 470 607 639 951 0,87 869 0,84 386 496 641 675 1014 0,88 917 0,84 459 583 753 793 622 587 0,88 571 587 0,84 263 241 334 291 432 377 454 396 825 587 0,87 774 587 0,84 314 239 404 291 522 377 549 396 853 587 0,87 794 587 0,84 330 239 424 291 548 377 577 396 947 587 0,88 865 587 0,84 420 239 534 289 690 373 726 393 1014 587 0,88 876 587 0,84 427 241 543 291 701 377 738 396 959 587 0,88 917 587 0,84 459 241 583 291 753 377 793 396 860 860 0,88 802 802 0,84 370 370 470 470 607 607 639 639 A A 835 0,90 777 0,80 355 451 583 614 926 0,90 844 0,80 372 478 618 650 985 0,88 888 0,84 442 562 726 764 603 587 0,88 552 587 0,84 251 233 319 281 413 363 435 382 804 587 0,87 753 587 0,84 302 230 388 281 501 363 528 382 831 587 0,88 773 587 0,84 353 233 449 281 580 363 610 382 924 587 0,88 842 587 0,84 407 231 517 279 668 361 703 380 930 587 0,88 848 587 0,84 410 233 521 281 674 363 709 382 985 587 0,88 888 587 0,84 442 233 562 281 726 363 764 382 930 835 0,88 777 777 0,84 355 355 451 451 583 583 614 614 852 V-ph-Hz 400-3-50 V 360-440 mm2 mm2 kA rms kA 5*240 50 6*240 50 6*240 50 3*240 3*240 50 50 4*240 3*240 50 50 4*240 3*240 50 50 6*240 3*240 50 50 6*240 3*240 50 50 6*240 3*240 50 50 5*240 5*240 50 50 902 1002 1102 1202 1302 1352 1402 1502 1702

24V via internal transformer

A A

kW kW A A A A A A

A A

kW kW A A A A A A

Legend: * Power input of the compressor(s) + fan(s) at maximum unit operating conditions. ** Nominal unit current draw at nominal conditions: evaporator entering/leaving voltage. *** Maximum unit operating current at maximum unit operating conditions and nominal voltage. **** Maximum unit operating current: this value is generally obtained at the nominal voltage minus 5%. Note: The 30XA 1102-1702 units have 2 power supply connections (circuits A+B and circuits C+D).

10 30XA 252-302-352

Dimensions/clearances

Legend: All dimensions are given in mm. Required clearances for maintenance and air flow

Recommended space for evaporator tube removal

Water inlet

Water outlet NOTE: Drawings are not contractually binding. Before designing an installation, consult the certified dimensional drawings, available on request.

Dimensions/clearances

30XA 402-452 30XA 352 copper/aluminium coils (options 254/255)

Legend: All dimensions are given in mm. Required clearances for maintenance and air flow

Recommended space for evaporator tube removal

Water inlet

Water outlet NOTE: Drawings are not contractually binding. Before designing an installation, consult the certified dimensional drawings, available on request.

11

12 30XA 502

Dimensions/clearances

Legend: All dimensions are given in mm. Required clearances for maintenance and air flow Recommended space for evaporator tube removal Water inlet Water outlet NOTE: Drawings are not contractually binding. Before designing an installation, consult the certified dimensional drawings, available on request.

30XA 602-702-752-802

Dimensions/clearances

Legend: All dimensions are given in mm. Required clearances for maintenance and air flow Recommended space for evaporator tube removal Water inlet Water outlet NOTE: Drawings are not contractually binding. Before designing an installation, consult the certified dimensional drawings, available on request.

13

14
Legend: All dimensions are given in mm. Required clearances for maintenance and air flow Recommended space for evaporator tube removal Water inlet Water outlet NOTE: Drawings are not contractually binding. Before designing an installation, consult the certified dimensional drawings, available on request.

Dimensions/clearances

30XA 852-902 30XA 752-802 copper/aluminium coils (options 254/255)

Dimensions/clearances

30XA 1002 30XA 902 copper/aluminium coils (options 254/255)

Legend: All dimensions are given in mm. Required clearances for maintenance and air flow Recommended space for evaporator tube removal Water inlet Water outlet NOTE: Drawings are not contractually binding. Before designing an installation, consult the certified dimensional drawings, available on request.

15

16 30XA 1102-1352

Dimensions/clearances

Legend: All dimensions are given in mm. Required clearances for maintenance and air flow Recommended space for evaporator tube removal

Water inlet

Water outlet NOTE: Drawings are not contractually binding. Before designing an installation, consult the certified dimensional drawings, available on request.

30XA 1402-1502 module 1/2

Dimensions/clearances
Legend: All dimensions are given in mm. Required clearances for maintenance and air flow Recommended space for evaporator tube removal

Water inlet

Water outlet

17

NOTE: Drawings are not contractually binding. Before designing an installation, consult the certified dimensional drawings, available on request.

18
Legend: All dimensions are given in mm Required clearances for maintenance and air flow Recommended space for evaporator tube removal Water inlet Water outlet NOTE: Drawings are not contractually binding. Before designing an installation, consult the certified dimensional drawings, available on request The 1402-1502 units are delivered in 2 modules to be assembled on site by the installer (the interconnecting pipe work between the two evaporators is not supplied by Carrier and is the responsibility of the local contractor).

30XA 1402-1502 module 2/2

Dimensions/clearances

30XA 1702 module 1/2

Dimensions/clearances

Legend: All dimensions are given in mm. Required clearances for maintenance and air flow Recommended space for evaporator tube removal Water inlet Water outlet NOTE: Drawings are not contractually binding. Before designing an installation, consult the certified dimensional drawings, available on request.

19

20
Legend: All dimensions are given in mm. Required clearances for maintenance and air flow Recommended space for evaporator tube removal Water inlet Water outlet

30XA 1702 module 2/2

Dimensions/clearances

NOTE: Drawings are not contractually binding. Before designing an installation, consult the certified dimensional drawings, available on request. The 1702 units are delivered in 2 modules to be assembled on site by the installer (the interconnecting pipe work between the two evaporators is not supplied by Carrier and is the responsibility of the local contractor).

Cooling capacities
Standard low-noise unit with micro-channel heat exchangers
30XA 252 - 1702 Condenser entering air temperature LWT LWT 35
CAP COMP kW kW UNIT COOL COOL kW l/s kPa

High efficiency/temperature unit (option 119) with micro-channel heat exchangers


30XA 252 - 1702 Condenser entering air temperature 35
CAP COMP kW kW UNIT COOL COOL kW l/s kPa

46
CAP COMP kW kW UNIT COOL COOL kW l/s kPa

252 7 302 352 402 452 502 602 702 752 802 852 902 1002 1102 1202 1302 1352 1402 1502 1702

260 283 303 384 439 493 597 655 697 750 804 854 956 1059 1156 1245 1314 1379 1427 1604

82,3 91,8 100,0 117,2 139,9 152,6 188,3 202,5 235,4 258,6 259,6 294,5 317,3 343,0 388,8 435,9 490,6 453,7 475,2 560,7

86,8 96,3 104,5 123,0 145,7 159,1 196,0 211,0 244,1 267,4 269,7 304,7 329,0 356,8 403,3 450,4 505,2 471,1 492,6 581,1

12,8 14,0 15,0 18,3 21,0 23,6 28,5 31,3 33,3 35,8 38,4 40,8 45,8 50,6 55,2 59,5 62,8 65,9 68,4 77,5

14,1 14,3 16,1 32,0 35,4 34,5 44,9 34,1 34,7 31,4 35,7 33,4 32,9 35,8 37,8 40,6 36,6 40,1 41,6 45,5

252 7 302 352 402 452 502 602 702 752 802 852 902 1002 1102 1202 1302 1352 1402 1502 1702

264 289 314 389 447 503 613 673 717 780 828 884 989 1089 1191 1292 1368 1420 1474 1692

77,0 85,1 93,3 108,8 128,5 140,5 172,6 185,3 212,7 233,8 235,2 265,3 289,2 311,8 351,7 388,1 432,5 410,5 427,5 491,4

86,3 94,4 102,6 121,2 140,5 154,0 189,1 203,3 231,3 252,4 256,2 287,0 314,0 340,3 381,7 418,1 462,5 446,5 463,5 533,4

13,0 14,3 15,5 18,6 21,3 24,0 29,3 32,1 34,2 37,3 39,6 42,2 47,4 52,0 56,9 61,7 65,3 67,8 70,7 81,7

14,6 14,9 17,0 33,0 37,0 36,0 47,0 36,0 37,0 35,0 38,0 36,0 35,0 38,0 40,0 44,0 40,0 43,0 44,0 51,0

241 263 285 359 411 461 567 621 663 720 764 819 912 1009 1103 1184 1228 1315 1362 1564

94,0 104,6 114,6 132,9 157,1 172,5 211,2 227,4 258,5 283,5 288,7 323,7 357,0 391,0 438,4 479,3 517,2 510,7 535,1 630,7

130,3 113,9 124,0 144,9 169,1 186,0 227,7 245,4 276,5 301,5 309,7 344,7 381,8 420,4 469,4 510,3 548,2 548,0 572,3 674,1

11,9 13,0 14,1 17,2 19,6 22,0 27,1 29,6 31,7 34,4 36,5 39,1 43,7 48,2 52,7 56,6 58,6 62,8 65,3 75,5

12,2 12,3 14,2 28,0 31,0 30,2 40,5 30,7 31,4 28,9 32,3 30,7 30,0 32,5 34,4 36,7 32,0 36,4 37,9 43,2

Low-noise unit with copper/aluminium heat exchangers (options 254/255)


30XA 252 - 1702 Condenser entering air temperature LWT 35
CAP COMP kW kW UNIT COOL COOL kW l/s kPa

High efficiency/temperature unit (option 119) with copper/aluminium heat exchangers (options 254/255)
30XA 252 - 1702 Condenser entering air temperature LWT 35
CAP COMP kW kW UNIT COOL COOL kW l/s kPa

46
CAP COMP kW kW UNIT COOL COOL kW l/s kPa

252 7 302 352 402 452 502 602 702 752 802 852 902 1002 1102 1202 1302 1352 1402 1502 1702

260 283 308 384 439 493 597 655 704 761 804 854 956 1059 1156 1245 1314 1379 1427 1604

82,2 91,7 98,1 119,4 142,6 155,5 192,0 206,4 229,6 254,3 264,7 290,9 323,5 349,7 396,4 444,4 500,3 462,5 484,5 571,7

86,7 96,2 103,4 125,4 148,6 162,2 200,2 215,4 239,4 264,1 275,2 302,2 335,5 364,0 411,4 459,4 515,3 480,5 502,5 592,7

12,8 14,0 15,2 18,3 21,0 23,6 28,5 31,3 33,6 36,3 38,4 41,3 45,8 50,6 55,2 59,5 62,8 65,9 68,4 77,5

14,1 14,3 16,6 32,0 35,4 34,5 44,9 34,1 35,4 32,3 35,7 34,2 32,9 35,8 37,8 40,6 36,6 40,1 41,6 45,5

252 7 302 352 402 452 502 602 702 752 802 852 902 1002 1102 1202 1302 1352 1402 1502 1702

264 289 314 389 447 503 613 673 722 786 828 890 989 1089 1191 1292 1368 1420 1474 1692

76,7 84,7 91,4 110,7 130,5 142,7 175,1 187,9 209,0 229,5 238,9 262,1 290,4 316,4 357,2 394,4 439,7 416,7 434,0 499,3

86,3 94,3 102,6 123,5 143,3 157,1 192,7 207,1 229,8 250,3 261,3 286,1 316,0 346,8 389,2 426,4 471,7 455,1 472,4 544,0

13,0 14,3 15,5 18,6 21,3 24,0 29,3 32,1 34,5 37,6 39,6 42,5 47,4 52,0 56,9 61,7 65,3 67,8 70,7 81,7

14,6 14,9 17,3 32,9 36,7 35,9 47,4 36,1 37,2 34,5 37,9 36,3 35,2 37,9 40,1 43,7 39,7 42,5 44,4 50,6

241 263 285 359 411 461 567 621 672 725 764 823 912 1009 1103 1184 1228 1315 1362 1564

93,6 104,2 112,8 135,4 160,1 175,8 215,1 231,7 257,3 280,8 294,1 321,3 350,2 383,7 430,2 470,4 507,5 501,2 525,1 618,9

103,2 113,8 124,0 147,8 172,5 189,8 232,2 250,3 277,5 301,0 315,8 344,5 374,2 412,2 460,2 500,4 537,5 537,2 561,1 660,9

11,9 13,0 14,1 17,2 19,6 22,0 27,1 29,6 32,1 34,7 36,5 39,3 43,7 48,2 52,7 56,6 58,6 62,8 65,3 75,5

12,2 12,3 14,3 28,0 31,0 30,2 40,5 30,7 32,2 29,4 32,3 31,0 30,0 32,5 34,4 36,7 32,0 36,4 37,9 43,2

Lgende: LWT CAP kW COMP kW UNIT kW COOL l/s COOL kPa

Leaving water temperature Cooling capacity Compressor power input Unit power input (compressors, fans and control circuit) Evaporator water flow rate Evaporator pressure drop

Application data: Standard units, refrigerant: R134a Evaporator temperature rise: 5 K Evaporator fluid: chilled water Fouling factor: 0.18 x 10-4 (m2 K)/W Performances in accordance with EN 14511

21

Order No. 13449-20, 01.2006 - New. Manufacturer reserves the right to change any product specifications without notice. The photograph on the front cover is for illustrative purposes only and is not part of any offer for sale or contract.

Manufactured by: Carrier SCS, Montluel, France Printed on Totally Chlorine Free Paper. Printed in the Netherlands.

You might also like