Professional Documents
Culture Documents
Sinodrills SDAS
Self Drilling Anchor System
Nuts
Plates
Coupling
Rock Bolts
Bits
Application:
Self drilling anchor bolt system is mainly used in slope stabilization, tunneling pre-support, foundations with micropiles, it is also widely used in the railway system, metro project etc. It can be installed in sites with weak rocks, loose soil, weathered layer, sand with stone layer and so difficult to create a hole in complex formations. The unconsolidated ground condition favor the self-drilling anchor bolt technique for fast and simple method of installation compared to the traditional method.
Features:
1, Self drilling anchor system has two performances: the one is drilling, the other one is grouting. It features a hollow bore for flushing, or simultaneous drilling and grouting. 2, Self drilling anchor system is reliable, efficient and convenient, which makes high piling output possible. 3, We can make the Hot-Dip Galvanizing Corrosion Protection according to EN ISO1461
http://www.sinodrills.com
R25
ROCK BOLT
Size R25N O.D(mm) 25.0 I.D(mm) 14.0 Ultimate Load(KN) 200 Yield Load(KN) 150 Weight(kg/m) 2.3
COUPLING
Size R25N Length(mm) 150.0 O.D(mm) 36.0 Weight(kg) 0.58
NUTS
Size R25N Length(mm) 35.0 Key Size(mm) 41.0 Weight(kg) 0.25
ANCHOR PLATE
Size R25N Dimensions(mm) 150x150 200x200 Thickness(mm) 8.0 10.0 Hole Diameter(mm) 27.0 32.0 Weight(kg) 1.4 3.1
DRILL BITS
Size R25N R25N R25N R25N R25N Type X EX EXX ES ESS Description Forged cross bit Hardened cross bits T.C cross bits Hardened cross bits T.C button bits O.D(mm) 42/51 42/51 42/51 42/51 42/51 ISO10208 Thread type Hardness T.C inserts bits HRA85~90 Hardened steel bits HRC50~55
http://www.sinodrills.com
R32
ROCK BOLT
Size R32L R32N R32S O.D(mm) 32.0 32.0 32.0 I.D(mm) 21.5 18.5 15.0 Ultimate Load(KN) 210 280 360 Yield Load(KN) 170 230 280 Weight(kg/m) 2.7 3.4 4.1
COUPLING
Size R32L R32N R32S Length(mm) 145.0 160.0 190.0 O.D(mm) 42.0 42.0 42.0 Weight(kg) 0.8 0.85 1.0
NUTS
Size R32 Length(mm) 45.0 Key Size(mm) 46.0 Weight(kg) 0.35
ANCHOR PLATE
Size R32 Dimensions(mm) 150x150 200x200 200x200 Thickness(mm) 8.0 10.0 12.0 Hole Diameter(mm) 35.0 35.0 35.0 Weight(kg) 1.3 3.1 3.7
DRILL BITS
Size R32 R32 R32 R32 R32 R32 R32 R32 R32 R32 R32 Type X EX EXX EY EYY EC ECC ES-F ESS-F Clay bit Clay bit Description Forged cross bit Hardened cross bits T.C cross bits Hardened 3 cutter bit T.C 3 cutter bit Hardened arched bit T.C arched bit Hardened button bit T.C button bit Clay bit With R38 adaptor O.D(mm) 51 51/76/90 51 76 51 51 51 51 51 76/90/110 130 ISO10208 T.C inserts bits HRA85~90 Hardened steel bits HRC50~55 Clay bits: HRC45~50 Thread type Hardness
SPACER
Size R32 O.D(mm) 72.0 Length(mm) 30.0 Weight(kg) 0.3 http://www.sinodrills.com
R38
ROCK BOLT
Size R38N O.D(mm) 38.0 I.D(mm) 19.0 Ultimate Load(KN) 500 Yield Load(KN) 400 Weight(kg/m) 6.0
COUPLING
Size R38 Length(mm) 220.0 O.D(mm) 51.0 Weight(kg) 1.7
NUTS
Size R38 Length(mm) 50.0 Key Size(mm) 50.0 Weight(kg) 0.4
ANCHOR PLATE
Size R38 Dimensions(mm) 200x200 Thickness(mm) 12.0 Hole Diameter(mm) 41.0 Weight(kg) 3.6
DRILL BITS
Size R38 R38 R38 R38 R38 R38 R38 R38 R38 Type XX EX EXX EY EYY ES ESS Clay bit Clay bit Description Two stage cross bit Hardened cross bits T.C cross bits Hardened 3 cutter bit T.C 3 cutter bit Hardened button bit T.C button bit Stepped clay bit With R51 adaptor O.D(mm) 110 76/90 90 76/90 76/90 76/115 76/115 90/110/130 150/175 ISO10208 T.C inserts bits HRA85~90 Hardened steel bits HRC50~55 Clay bits: HRC45~50 Thread type Hardness
SPACER
Size R38 O.D(mm) 78.0 Length(mm) 30.0 Weight(kg) 0.3
http://www.sinodrills.com
R51
ROCK BOLT
Size R51L R51N O.D(mm) 51.0 51.0 I.D(mm) 36.0 33.0 Ultimate Load(KN) 550 800 Yield Load(KN) 450 630 Weight(kg/m) 7.0 8.4
COUPLING
Size R51 R51 Length(mm) 140.0 220.0 O.D(mm) 63.0 63.0 Weight(kg) 1.2 1.9
NUTS
Size R51 Length(mm) 70.0 Key Size(mm) 75.0 Weight(kg) 1.55
ANCHOR PLATE
Size R51 R51 Dimensions(mm) 200x200 250x250 Thickness(mm) 30.0 40.0 Hole Diameter(mm) 60.0 60.0 Weight(kg) 8.8 18.5
DRILL BITS
Size R51 R51 R51 R51 Type XX ES ESS Clay bit Description Two stage cross bit Hardened button bit T.C button bit Stepped Clay bit O.D(mm) 110 100/115 ISO1720 100/115 76/90/150/175
Thread type
Hardness T.C inserts bits HRA85~90 Hardened steel bits HRC50~55 Clay bits: HRC45~50
SPACER
Size R51 O.D(mm) 91.0 Length(mm) 30.0 Weight(kg) 0.3
http://www.sinodrills.com
COUPLING
Size T76 T111 Length(mm) 220.0 250.0 O.D(mm) 95.0 140.0 Weight(kg) 6.4 11.5
NUTS
Size T76 T111 Length(mm) 80.0 120.0 Key Size(mm) 100.0 150.0 Weight(kg) 3.6 9.0
ANCHOR PLATE
Size T76 T111 T111 Dimensions(mm) 250x250 300x300 350x350 Thickness(mm) 60.0 80.0 90.0 Hole Diameter(mm) 80.0 130.0 130.0 Weight(kg) 27.0 47.8 76.8
DRILL BITS
Size T76 T76 T76 T76 T76 T111 T111 T111 Type XX ESS EY EYY Clay bit EX ESS Clay bit Description Two stage cross bit T.C button bit Hardened 3 cutter bit T.C 3 cutter bit Stepped clay bit Hardened cross bit T.C button bit Stepped clay bit O.D(mm) 130/145/175/200 120 130 130 130/150/175/200 220 170 220 Int. Standard T.C inserts bits HRA85~90 Hardened steel bits HRC50~55 Clay bits: HRC45~50 Thread type Hardness
SPACER
Size T76 T111 O.D(mm) 130.0 170.0 Length(mm) 40.0 50.0 Weight(kg) 1.0 1.8
http://www.sinodrills.com
EX
EY
EXX
EYY
EC
Hardened drill bit with optimized geometry for unconsolidated soil with small boulders
ECC
T.C drill bit with optimized geometry for soft to medium rock formations.
ES-F
ESS-F
ESS-D
XX
http://www.sinodrills.com
T-Thread Anchor
Rod Size OD/ID(mm) 30/16 30/14 32/20 30/11 40/20 40/16 52/26 73/56 73/53 73/45 73/35 103/78 103/51 127/111 130/60 Tensile Test
Ultimate load KN 220 260 291 320 539 660 929 1194 1160 1630 1980 2282 3460 2400 7940
Yield point KN 180 220 244 260 430 525 730 785 970 1180 1355 1800 2750 1810 5250
Weight kg 2.7 2.9 3.2 3.3 5.6 7.0 10.0 11.1 12.3 17.8 21.2 24.9 43.4 23.5 75.0 Rock bolts
Loading on truck
http://www.sinodrills.com