Professional Documents
Culture Documents
K2 SERIES ULTRACAPACITORS
TYPICAL APPLICATIONS
Automotive subsystems Wind turbine pitch control Hybrid vehicles Rail Heavy industrial equipment UPS & telecom systems
PRODUCT SPECIFICATIONS
ELECTRICAL
Rated Capacitance
1 1 1
BCAP1500 1,500 F 1,500 F 1,800 F 0.47 m 100 A 2.70 V 2.85 V 1150 A 3.0 mA
BCAP2000 2,000 F 2,000 F 2,400 F 0.35 m 100 A 2.70 V 2.85 V 1500 A 4.2 mA
BCAP3000 3,000 F 3,000 F 3,600 F 0.29 m 100 A 2.70 V 2.85 V 1900 A 5.2 mA
Minimum Capacitance, initial Maximum ESRDC, initial Rated Voltage Absolute Maximum Voltage2 Absolute Maximum Current
1
1.5 mA
TEMPERATURE
Operating temperature
(Cell case temperature)
-40oC 65oC
-40oC 65oC
-40oC 65oC
-40oC 65oC
-40oC 65oC
Minimum Maximum
-40oC 70oC 160 g Threaded or Weldable 14 Nm ISO 16750, Table 14 SAE J2464
-40oC 70oC 260 g Threaded or Weldable 14 Nm ISO 16750, Table 14 SAE J2464
-40oC 70oC 280 g Threaded or Weldable 14 Nm ISO 16750, Table 14 SAE J2464
-40oC 70oC 360 g Threaded or Weldable 14 Nm ISO 16750, Table 14 SAE J2464
-40oC 70oC 510 g Threaded or Weldable 14 Nm ISO 16750, Table 14 SAE J2464
PHYSICAL
Mass, typical Terminals Maximum Terminal Torque (K04) Vibration Specification Shock Specification
*Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase. See the warranty details and enclosed information for applicable operating and use requirements.
Page 1
maxwell.com
DATASHEET
K2 SERIES ULTRACAPACITORS
SAFETY
(Current possible with short circuit from rated voltage. Do not use as an operating current.)
Certifications
TYPICAL CHARACTERISTICS
THERMAL CHARACTERISTICS
Thermal Resistance (Rca, Case to Ambient), typical8 Thermal Capacitance (Cth), typical8 Maximum Continuous Current (T = 15oC)8 Maximum Continuous Current (T = 40oC)8 6.5oC/W 190 J/oC 54 ARMS 88 ARMS 5.3oC/W 300 J/oC 70 ARMS 110 ARMS 4.5oC/W 320 J/oC 84 ARMS 140 ARMS 3.8oC/W 410 J/oC 110 ARMS 170 ARMS 3.2oC/W 600 J/oC 130 ARMS 210 ARMS
LIFE
DC Life at High Temperature1
Capacitance Change ESR Change
(held continuously at Rated Voltage and Maximum Operating Temperature) (% decrease from minimum initial value) (% increase from maximum initial value)
1,500 hours 20% 100% 10 years 20% 100% 1,000,000 cycles 20%
1,500 hours 20% 100% 10 years 20% 100% 1,000,000 cycles 20%
1,500 hours 20% 100% 10 years 20% 100% 1,000,000 cycles 20%
1,500 hours 20% 100% 10 years 20% 100% 1,000,000 cycles 20%
1,500 hours 20% 100% 10 years 20% 100% 1,000,000 cycles 20%
(% decrease from minimum initial value) (% increase from maximum initial value)
Page 2
maxwell.com
DATASHEET
K2 SERIES ULTRACAPACITORS
LIFE (Cont'd)
ESR Change
(% increase from maximum initial value)
100% 65 A 4 years
100% 75 A 4 years
Test Current
Shelf Life
NOTES
1. Capacitance and ESRDC measured at 25C using specified test current per waveform below. 2. Absolute maximum voltage, non-repeated. Not to exceed 1 second. 3. After 72 hours at rated voltage. Initial leakage current can be higher. 0.12V2 4. Per IEC 62391-2, Pd = ESR x mass DC 5. Pmax = 6. Emax = V2 4 x ESRDC x mass CV2 3,600 x mass 8. T=IRMS2 x ESR x Rca 9. Cycle using specified test current per waveform below. 10. Cycle life varies depending upon application-specific characteristics. Actual results will vary. 11. Per United Nations material classification UN3499, all Maxwell ultracapacitors have less than 10 Wh capacity to meet the requirements of Special Provisions 361. When packaged according to the regulation, both individual ultracapacitors and modules composed of those ultracapacitors shipped by Maxwell can be transported without being treated as dangerous goods (hazardous materials).
Page 3
maxwell.com
DATASHEET
K2 SERIES ULTRACAPACITORS
MOUNTING RECOMMENDATIONS
Do not reverse polarity. Please refer to document Products are marked with the following information: number 1016419, available at maxwell.com for welding Rated capacitance, rated voltage, product number, 4 3 2 1 name of manufacturer, positive terminal, warning recommendations. marking, serial number.
REVISIONS REV 1 DESCRIPTION CO PROTOTYPE
MARKINGS
M12 X 1.75 - 6g D1
C
14 14
3 L
2
REVISIONS REV 1 DESCRIPTION
1
CO -
PRODUCTION RELEASE
60.7 D2 0.7
14.00 0.05
C
THE INFORMATION CONTAINED IN THIS DOCUMENT IS MAXWELL CONFIDENTIAL INFORMATION AND IS THE SOLE PROPERTY OF MAXWELL TECHNOLOGIES. ANY REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN PERMISSION OF MAXWELL TECHNOLOGIES IS PROHIBITED.
NOTICE:
APPROVALS
DATE
3/2/2011
3.180 0.125
3.180 0.125
0.025mm
AL 0.3
X/X .X .XX
MATERIAL
.5 .25 .125
ANGLE 0.5
3000-T
B
PART NO. REV
A
N/A
B
MODEL BCAP0650 BCAP1200 BCAP1500 BCAP2000 BCAP3000 P/N WITH HEAT SHRINK TUBING 108700, 108700B 108702, 108702B 108704, 108704B 108706, 108706B 108708, 108708B
4
A
P/N WITH LABELS 108294, 108294B CAUTION CONTAINS PARTS AND/OR ASSEMBLIES 108316, SUSCEPTIBLE 108316B TO DAMAGE BY 108324, ELECTROSTATIC 108324B DISCHARGE (ESD) 108325, 108325B 108058, 108058B
THE INFORMATION CONTAINED IN THIS DOCUMENT IS MAXWELL CONFIDENTIAL INFORMATION AND IS THE SOLE PROPERTY OF MAXWELL TECHNOLOGIES. ANY REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN PERMISSION OF MAXWELL TECHNOLOGIES IS PROHIBITED.
PER IFS
SCALE
B 68911
2:1
SIZE
CAGE CODE
DOC. NO.
REV
SHEET
1 OF 1
NOTICE:
2
APPROVALS DATE
1
9244 BALBOA AVENUE, SAN DIEGO, CA 92123 U.S.A
DESCRIPTION
Author 1
9/13/2010
CHECKED DESIGN ENGR MECHANICAL ENGR PROCESS ENGR TEST ENGR QUALITY ENGR PRODUCTION ENGR
Page 4
maxwell.com
3RD ANGLE PROJECTION CAUTION CONTAINS PARTS AND/OR ASSEMBLIES SUSCEPTIBLE TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD)
MATERIAL
Material
FINISH
SCALE
B 68911
1:1
SIZE
CAGE CODE
PART NO.
SEE TABLE
REV
REV
N/A 1 OF 1
DOC. NO.
1014428
SHEET
C:\Rina\ALISON\
ANGLE 0.5
DATASHEET
K2 SERIES ULTRACAPACITORS
Part Description BCAP0650 P270 K04/05 BCAP1200 P270 K04/05 BCAP1500 P270 K04/05 BCAP2000 P270 K04/05 BCAP3000 P270 K04/05
Package Quantity 30 30 30 15 15
Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following U.S. patents and their respective counterparts: 6643119, 7295423, 7342770, 7352558, 7384433, 7440258, 7492571, 7508651, 7580243, 7791860, 7791861, 7859826, 7883553, 7935155, 8072734, 8098481, 8279580, and patents pending.
Maxwell Technologies, Inc. Global Headquarters 3888 Calle Fortunada San Diego, CA 92123 USA Tel: +1 858 503 3300 Fax: +1 858 503 3301
Maxwell Technologies SA Route de Montena 65 CH-1728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05
Maxwell Technologies, GmbH Leopoldstrasse 244 80807 Mnchen Germany Tel: +49 (0)89 / 4161403 0 Fax: +49 (0)89 / 4161403 99
Maxwell Technologies Shanghai Trading Co. Ltd. Unit A2,C 12th Floor Huarun Times Square 500 Zhangyang Road, Pudong New Area Shanghai 200122, P.R. China Phone: +86 21 3852 4000 Fax: +86 21 3852 4099
Maxwell Technologies Korea Co., Ltd. Room 1524, D-Cube City Office Tower, 15F #662 Gyeongin-Ro, Guro-Gu, Seoul, 152-706 South Korea Phone: +82 10 4518 9829
MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGYS FUTURE, BOOSTCAP, C CELL, D CELL and their respective designs and/or logos are either trademarks or registered trademarks of Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or in part, without the prior written permission from Maxwell Technologies, Inc. All contents copyright 2013 Maxwell Technologies, Inc. All rights reserved. No portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc.
Page 5
maxwell.com
Mouser Electronics
Authorized Distributor
Maxwell Technologies:
BCAP0650 P270 K04 BCAP0650 P270 K05 BCAP1200 P270 K04 BCAP1200 P270 K05 BCAP1500 P270 K04 BCAP1500 P270 K05 BCAP2000 P270 K04 BCAP2000 P270 K05 BCAP3000 P270 K04 BCAP3000 P270 K05