Professional Documents
Culture Documents
PT
In
te
rn
al
T3902-390-02
Fo r
se
nl
Copyright 2012 Parametric Technology Corporation. All Rights Reserved. Copyright for PTC software products is with Parametric Technology Corporation, its subsidiary companies (collectively PTC), and their respective licensors. This software is provided under written license agreement, contains valuable trade secrets and proprietary information, and is protected by the copyright laws of the United States and other countries. It may not be copied or distributed in any form or medium, disclosed to third parties, or used in any manner not provided for in the software licenses agreement except with written prior approval from PTC. UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVIL DAMAGES AND CRIMINAL PROSECUTION. User and training guides and related documentation from PTC is subject to the copyright laws of the United States and other countries and is provided under a license agreement that restricts copying, disclosure, and use of such documentation. PTC hereby grants to the licensed software user the right to make copies in printed form of this documentation if provided on software media, but only for internal/personal use and in accordance with the license agreement under which the applicable software is licensed. Any copy made shall include the PTC copyright notice and any other proprietary notice provided by PTC. Training materials may not be copied without the express written consent of PTC. This documentation may not be disclosed, transferred, modified, or reduced to any form, including electronic media, or transmitted or made publicly available by any means without the prior written consent of PTC and no authorization is granted to make copies for such purposes. Information described herein is furnished for general information only, is subject to change without notice, and should not be construed as a warranty or commitment by PTC. PTC assumes no responsibility or liability for any errors or inaccuracies that may appear in this document. For Important Copyright, Trademark, Patent and Licensing Information see backside of this guide.
Fo r
PT
In
te
rn
al
se
nl
Fo r
PT
Whatever your learning needs are, PTC University can help you get the most out of your PTC products.
PTC University additionally offers Precision Learning Programs. These are corporate learning programs designed to your organizations specific goals, current skills, desired competencies, and training preferences.
In
Instructor-led Training (ILT) The ideal blend of classroom lectures, personal demonstrations, hands-on workshops, assessments, and post-classroom tools. Pro/FICIENCY This Web-based, skills assessment and development-planning tool will help improve your skills and productivity. eLearning Libraries 24/7 access to Web-based training that will compliment your instructor-led course. Precision LMS A powerful learning management system that will manage your eLearning Library and Pro/FICIENCY assessments.
te
rn
al
The course you are about to take will expose you to a number of learning offerings that PTC University has available. These include:
se
nl
Technical Support, License Management, Training & Consulting Tel: +800-PTC-4-HELP (00-800-78-24-43-57)
Asia
Please refer to http://www.ptc.com/services/training/contact.htm for contact information. In addition, you can access the PTC Web site at www.ptc.com. Our Web site contains the latest training schedules, registration information, directions to training facilities, and course descriptions. You can also reach technical support, and register for online service options such as knowledge base searches, reference libraries, and documentation. You can also find general information about PTC, PTC Products, Consulting Services, Customer Support, and PTC Partners.
Fo r
PT
In
te
rn
al
se
Europe
nl
Precision Learning
Precision Learning in the Classroom
PTC University uses the Precision Learning methodology to develop effective, comprehensive class material that will improve the productivity of both individuals and organizations. PTC then teaches using the proven instructional design principal of Tell Me, Show Me, Let Me Do: Topics are introduced through a short presentation, highlighting the key concepts. These key concepts are then reinforced by seeing them applied in the software application. You then apply the concepts through structured exercises.
Each student that enrolls in a PTC class has a PTC University eLearning account. This account will be automatically created if you do not already have one. A Pro/FICIENCY assessment from the course content that generates a Recommended Learning Report based on your results. A Web-based training version of the course, based on the same instructional approach of lecture, demonstration, and exercise. The Recommended Learning Report will link directly to sections of this training that you may want to review. Please note that Web-based training may not be available in all languages. The Web-based training is available in your account for one year after the live class.
Fo r
PT
In
te
rn
al
se
At the end of the class, you will either take a Pro/FICIENCY assessment via your PTC University eLearning account, or your instructor will provide training on how to do this after the class.
After the course, a Pro/FICIENCY assessment is provided to enable you to assess your understanding of the materials. The assessment results will also identify the class topics that require further review.
nl
Fo r
Please note that a localized map may not be available in every language and that the map above is partial and for illustration purposes only. Before the end of the class, your instructor will review the map corresponding to the course you are taking. This review, along with instructor recommendations, should give you some ideas for additional training that corresponds to your role and job functions.
PT
In
te
rn
al
se
nl
Training Agenda
Day 1
Module 01 Module 02 Module 03 Module 04 Module 05 Module 06 Introduction to the Creo Parametric Basic Modeling Process Understanding Creo Parametric Concepts Using the Creo Parametric Interface Editing Geometry, Features, and Models Creating Sketcher Geometry Selecting Geometry, Features, and Models
Day 2
Module 07 Module 08 Module 09 Module 10 Module 11 Module 12 Using Sketcher Tools Creating Sketches for Features Creating Extrudes, Revolves, and Ribs Creating Sweeps and Blends
Day 3
Module 13 Module 14 Module 15 Module 16 Module 17 Module 18
Creating Holes, Shells, and Draft Creating Rounds and Chamfers Project I Group, Copy, and Mirror Tools Creating Patterns
Module 19 Module 20
Fo r
Module 24
Day 5
Module 25 Module 26 Module 27 Module 28 Investigating Parent/Child Relationships Capturing and Managing Design Intent Resolving Failures and Seeking Help Project II
PT
Day 4
Assembling with Constraints Assembling with Connections Exploding Assemblies Drawing Layout and Views Using Layers
In
te
rn
al
se
nl
Table of Contents
Introduction to Creo Parametric 2.0
Creating Extrudes, Revolves, and Ribs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 Creating the Crankshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2 Thickening the Piston Wrist Pin Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-5 Completing the Crankshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-7 Creating Profile Rib Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10 Creating Sweeps and Blends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1 Creating a Sweep Through a 3-D Curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2 Creating a Blend Feature on FLYWHEEL.PRT and Embedding the Orientation Datum . . . . . . 12-4
Project I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1 Group, Copy, and Mirror Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rotating a Copy of a Boss on the Engine Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copying and Translating Carburetor Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mirroring Selected Carburetor Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Patterning Vents using a Two Directional Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating Flywheel Blades using an Axis Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating Exhaust Cuts in the Muffler using a Two Directional Axis Pattern . . . . . . . . . . . . . . . . . Patterning Rounds on the Cylinder Fins using Reference Patterns . . . . . . . . . . . . . . . . . . . . . . .
In
Creating Rounds and Chamfers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating Rounds on the Rear Engine Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating Rounds on the Gearbox Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating Rounds on the Rear Engine Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating Full Rounds on the Connecting Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating Chamfers on the Crankshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
al
Creating Holes, Shells, and Draft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1 Common Dashboard Options: Hole Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2 Creating Coaxial Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-3 Creating Linear Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-7 Creating Radial and Diameter Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-8 Shelling the Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-10
se
te
rn
PT
Fo r
Measuring and Inspecting Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-1 Analyzing Design Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-2 Assembling with Constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-1 Creating the Engine Assembly using Automatic Constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-2 Creating the Drill Chuck Assembly using Automatic Constraints . . . . . . . . . . . . . . . . . . . . . . . . . . 19-6 Creating the Crank Assembly using Automatic Constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-9 Creating the Piston Assembly using Automatic Constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-11
nl
14-1 14-2 14-4 14-7 14-8 14-9 16-1 16-2 16-4 16-6 17-1 17-2 17-3 17-4 17-6
Drawing Layout and Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-1 Creating Drawing Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-2 Creating Drawing Annotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-1 Annotating Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-2 Using Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-1 Creating and Managing Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-2
Fo r
PT
In
te
rn
al
se
nl
Project II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-1
Fo r PT C In te rn al U se O
nl
Fo r
2012 PTC
PT
In
te
rn
al
se
O
Module 10
Module 10 | Page 1
nl
Scenario
Close Window Extrude\Crankshaft Task 1: Erase Not Displayed CRANKSHAFT.PRT
Fo r
Module 10 | Page 2
PT
7. Click Axis from the Datum group. 8. In the model tree, right-click the newly created axis and select Rename. Type CRANK_PIN and press ENTER.
In
6. With datum plane OFFSET still selected, press CTRL and select datum plane RIGHT.
te
from the Datum group. 3. Click Plane 4. Drag the drag handle up to an offset value of 14, editing it if necessary. 5. In the Datum Plane dialog box, select the Properties tab. Edit the Name to OFFSET. Click OK.
rn
al
2012 PTC
1. Enable only the following Datum Display types: . 2. Select datum plane TOP from the model tree.
se
nl
As part of the new design for the gas powered drill, you have been assigned to the crankshaft. Create the crankshaft main journal and connecting rod journal, adhering to the existing sketch.
9. Click Sketch . 10. Select datum plane FRONT, and click Sketch in the Sketch dialog box. 11. Enable only the following Sketcher Display types: . and select datum axis 12. Click References CRANK_PIN as a new reference. 13. Click Close in the References dialog box. 14. Select Center and Point from the Circle types drop-down menu and sketch the circle with the center snapping to the CRANK_PIN reference. Middle-click to stop circle creation and edit the diameter to 10. 15. Click OK . 16. Click in the background to de-select the sketch. Task 2: Create the main crankshaft journal. and Axis Display
2. Click Extrude . 3. Select the SKETCH_CRANK sketch from the model tree. 4. Select the Options tab in the dashboard and for SIDE 2. select Blind 5. Edit the depth for SIDE 1 to 46.5 and the depth for SIDE 2 to 73.5. 6. Click Complete Feature .
7. Click Extrude . 8. Select the SKETCH_LOBE sketch from the model tree. 9. Select the Options tab in the dashboard and select To Selected for SIDE 1. Select datum plane LOBE_FRONT from the model tree as the reference. 10. In the Options tab of the dashboard, select To for SIDE 2. Selected Select datum plane LOBE_REAR from the model tree as the reference. 11. Click Complete Feature .
Fo r
2012 PTC
PT
In
te
rn
al
Module 10 | Page 3
se
nl
Task 3:
1. Click Extrude . 2. Select the Sketch 1 sketch from the model tree. 3. In the dashboard, click Remove Material necessary. Click Change Material Direction Edit the depth to Symmetric depth value to 10. . if
Fo r
Module 10 | Page 4
PT
In
te
rn
al
2012 PTC
se
5. Click Save from the Quick Access toolbar and click OK to save the model. 6. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
nl
Scenario
Extrude\Thicken Task 1:
PISTON.PRT
Fo r
. Click Thicken Sketch Edit the material thickness to 2. as Click Change Thickness Side necessary to toggle the thickness to the outside of the sketch. 6. Click Complete Feature .
2012 PTC
PT
3. Click Extrude from the Shapes group. 4. Select Sketch 5 from the model tree. 5. Select the Options tab in the dashboard and select To Next for Side 1. Select To Next for Side 2.
In
te
rn
al
Module 10 | Page 5
1. Disable all Datum Display types. 2. Middle-click and drag to orient the model.
se
Close Window
nl
You have determined that the piston model and the stress that will be generated by the wrist pin are too high for the current amount of material around the wrist pin hole. Add additional material around the wrist pin hole so it meets design criteria.
Task 2:
1. Click Extrude . 2. Select Sketch 5 from the model tree. 3. In the dashboard, click Remove Material Click Symmetric . Edit the depth to 14. . Click Thicken Sketch Edit the material thickness to 2. Click Change Thickness Side as necessary to toggle the thickness to the outside of the sketch. 4. Click Complete Feature . .
Fo r
Module 10 | Page 6
PT
In
te
rn
al
2012 PTC
5. Click Save from the Quick Access toolbar and click OK to save the model. 6. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
se
nl
Scenario
Close Window Revolve\Solid Task 1: Erase Not Displayed CRANKSHAFT.PRT
Create the sketch for the taper on one side of the CRANKSHAFT.PRT.
1. Disable all Datum Display types. from the Datum group. 2. Click Sketch 3. Select datum plane RIGHT, orient datum plane TOP to face Top, and click Sketch in the Sketch dialog box. from the In Graphics 4. Click Sketch View toolbar. 5. Enable only the following Sketcher Display types: .
from the Datum group Click Centerline and sketch a horizontal geometry centerline down the center of the shaft. Zoom in on the right side of the sketch. from the Line types Select Line Chain drop-down menu and sketch two lines, snapping the endpoints to the references. Click Normal . Dimension and edit the sketch as shown. 10. Click OK . 11. Orient to the Standard Orientation.
Fo r
from the Display Style types 12. Select Shading drop-down menu in the In Graphics toolbar.
2012 PTC
PT
7. Click References and select the top and right surfaces of the main shaft as new references. 8. Click Close in the References dialog box.
In
6. Select No Hidden from the Display Style types drop-down menu in the In Graphics toolbar.
te
rn
al
Module 10 | Page 7
se
nl
You have been assigned to complete the crankshaft. Create the tapers on either end of the crankshaft.
Task 2:
Cut the taper on the crankshaft using the sketch. from the Shapes group. from the dashboard. from the dashboard.
Task 3:
Create the sketch for the step on the other side of the CRANKSHAFT.PRT.
and sketch a horizontal Click Centerline geometry centerline down the center of the shaft. from the Select Corner Rectangle Rectangle types drop-down menu and sketch the rectangle, snapping to the references. Edit the dimensions as shown. 8. Click OK . 9. Orient to the Standard Orientation. .
Fo r
Module 10 | Page 8
PT
5. Click References and select the top and left surfaces of the main shaft as new references. 6. Click Close in the References dialog box.
In
te
rn
al
2012 PTC
se
nl
Task 4:
1. Click Revolve
Fo r
2012 PTC
PT
In
te
rn
al
Module 10 | Page 9
4. Click Save from the Quick Access toolbar and click OK to save the model. 5. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
se
nl
Scenario
Rib\Profile Task 1:
ENG_BLOCK.PRT
Fo r
Module 10 | Page 10
PT
from the Setup group. 6. Click References Select the three surfaces shown (highlighted in green in the following figure) as references, resulting in a total of four specified references. Click Close in the References dialog box.
In
te
from the Datum group, and 2. Click Sketch select datum plane RIB from the model tree as the sketch plane. Verify that the Orientation Reference is set to datum plane FRONT and that the Orientation direction is set to Top. Click Sketch. 3. Enable only the following Sketcher Display . types:
rn
al
2012 PTC
se
Close Window
nl
Rib features are used to add structural strength to parts. Product testing has indicated that the engine block part needs an additional rib to strengthen it against premature failure. Your assignment is to add the additional profile rib feature.
7. Zoom in and sketch, as shown in the following figure: Right-click and select Line Chain. Sketch a horizontal line starting from the diagonal reference, stopping short of the vertical reference. from the Arc Select 3-Point / Tangent End types drop-down menu. Start the arc on the unfinished end of the sketched line, and finish on the vertical reference. Middle-click to stop sketching arcs. Right-click and select Dimension. Select the left end of the arc and the horizontal reference, and place the first dimension. Type 2 and press ENTER. Select the horizontal line you sketched and the horizontal reference, and place the second dimension. Type 5 and press ENTER. Select One-by-One from the Select types drop-down menu and edit the arc radius to 6. 8. Click OK from the ribbon. 9. Middle-click and drag to orient the model.
from the Rib types drop-down menu. Select the References tab. Click Flip and then edit the thickness to 2. Click Change Thickness Option as necessary to set the rib feature symmetric about the sketch.
Fo r
2012 PTC
PT
In
te
rn
al
Module 10 | Page 11
se
nl
12. Click Save from the Quick Access toolbar and click OK to save the model. 13. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Fo r
Module 10 | Page 12
PT
In
te
rn
al
2012 PTC
se
nl
Fo r
2012 PTC
PT
In
te
rn
al
se
O
Module 12
Module 12 | Page 1
nl
Scenario
Close Window Erase Not Displayed COIL.PRT
Sweep\Open-Trajectory_Solid Task 1:
1. Disable all Datum Display types. 2. Select Sweep from the Sweep types drop-down menu in the Shapes group. 3. Select the 3-D curve as the trajectory in the graphics window.
Fo r
6. Sketch as shown: Right-click and select Circle. Sketch a circle at the intersection of the centerlines. Double-click the dimension and edit the diameter to 5.5. Click OK .
Module 12 | Page 2
PT
In
te
rn
4. Click Create Section from the dashboard. 5. Enable only the following Sketcher Display types: .
al
2012 PTC
se
nl
You are assigned to create the cord of the coil part that connects the main body of the coil to the spark plug adapter. Sweep a solid along the existing 3-D curve.
7. Click Complete Feature and click in the background to de-select all geometry. 8. In the ribbon, select the View tab. 9. Select Appearances Manager from the Appearance Gallery types drop-down menu. 10. Load the appearance.dmt if necessary, and click Close. 11. Select the solid_black appearance sphere from the Appearance Gallery types drop-down menu. 12. Complete the following: Press CTRL and select the front and back sweep surfaces. Click OK in the Select dialog box. from the Quick Access toolbar 13. Click Save and click OK to save the model. 14. Click File > Manage Session > Erase Current > Yes to erase the model from memory. This completes the exercise.
Fo r
2012 PTC
PT
In
te
rn
al
Module 12 | Page 3
se
nl
Exercise 2: Creating a Blend Feature on FLYWHEEL.PRT and Embedding the Orientation Datum
Objectives
After successfully completing this exercise, you will be able to: Create blend features. Embed the orientation datum plane.
Close Window
Blend\Sketch-Sections_Solid Task 1:
3. In the ribbon, click the Shapes group drop-down menu and select Blend
In
1. Enable only the following Datum Display types: . 2. Create a datum plane as shown: . Click Plane Select datum plane FRONT. Press CTRL and select axis CRANK. Double-click the angle and edit it to 11.25 or -11.25 to obtain the direction shown. Select the Properties tab in the Datum Plane dialog box. Type ANGLE as the Name, and click OK.
te
rn
al
.
2012 PTC
Fo r
. 4. In the dashboard, click Thicken Sketch Select the Sections tab and verify that Sketched sections is selected. 5. Right-click in the graphics window and select Define Internal Sketch. 6. Select datum plane TOP as the sketching plane. 7. In the Sketch dialog box, select Bottom as the Orientation and select datum plane ANGLE to face the bottom of the window. Click Sketch.
Module 12 | Page 4
PT
se
You are assigned to create the initial blade of the flywheel. The design specification document recommends using a thin protrusion to create this feature.
nl
Scenario
8. Enable only the following Sketcher Display types: . 9. Begin the sketch as shown: Select the CRANK axis as a reference. Click Close in the References dialog box. and Plane Display Disable Axis Display . . Click Shading With Edges . Click Sketch View from the Click Construction Mode Sketching group to enable it. Right-click in the graphics window and select Circle. Sketch two construction circles. and dimension the Click Normal diameters, editing the values as shown. 10. Click Construction Mode to disable it. 11. Sketch the first blend section as shown: Right-click and select 3-Point / Tangent End. Sketch an arc as shown. Right-click and select Dimension. Dimension the sketch and edit the values as shown. 12. Click OK .
Fo r
13. Sketch the second blend section as shown: Right-click in the graphics window and select Insert. Right-click and select Sketch to begin sketching Section 2. Right-click and select 3-Point / Tangent End. Sketch the smaller arc as shown. Ensure you constrain the arc tangent to the previous arc at the start point. Right-click and select Dimension. Dimension the radius and edit its value to 11. from the ribbon. Click OK 14. Press CTRL+D to orient to the Standard Orientation. 15. in the dashboard, type 2.1 as the thickness.
2012 PTC
PT
In
te
rn
al
Module 12 | Page 5
se
nl
Task 2:
4. Click Save from the Quick Access toolbar and click OK to save the model. 5. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Fo r
Module 12 | Page 6
PT
Creating the blend on an angular datum and then embedding the datum enables the features to be easily patterned with the Dimension option. The angular datum plane is not necessary when patterning with the Axis option.
In
te
rn
al
2012 PTC
1. Click and hold the datum plane ANGLE in the model tree. Drag the feature and drop it on the Blend feature. 2. Expand the Blend feature. 3. Notice that the datum plane ANGLE is now embedded in the blended protrusion feature and hidden.
se
nl
16. Enable Plane Display and select Shading from the Display Types drop-down menu in the In Graphics toolbar. 17. In the dashboard, select the Sections tab. Select Section 2. Select Reference and select datum plane FIN_HEIGHT. 18. Click Complete Feature .
Fo r
2012 PTC
PT
In
te
rn
al
se
O
Module 13
Module 13 | Page 1
nl
Scenario
Close Window Hole\Depth Task 1: Erase Not Displayed CYLINDER.PRT
Fo r
Depth options can also be specified by selecting the flyout depth options from the dashboard.
7. Click Save from the Quick Access toolbar and click OK to save the model. 8. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Module 13 | Page 2
PT
6. Cursor over the depth handle. Right-click and select To Selected. Middle-click to spin the model and select the bottom surface of the fin, as shown. Click Complete Feature .
1. Enable only the following Datum Display types: . 2. Select HOLE_2 in the model tree. Right-click and select Edit Definition. Notice that the current depth option is Blind. 3. Drag the depth handle to 20, editing the value if necessary, and click Preview Feature from the Hole dashboard. Then click Resume Feature from the dashboard. 4. Cursor over the depth handle. Right-click and from select To Next. Click Preview Feature the dashboard. Then click Resume Feature from the dashboard. 5. Cursor over the depth handle. Right-click and select Through All. Click Preview Feature from the dashboard. Then click Resume Feature from the dashboard.
In
te
rn
al
2012 PTC
se
nl
Edit the definition of a hole feature and test the available depth options. Get an good understanding of each depth option by observing the results each option produces.
The axis should remain selected between these steps. Do not click in the graphics window, as this will de-select it.
Fo r
2012 PTC
PT
In
te
2. From the Datum group, click Axis . Select the cylindrical surface shown in the upper figure as the reference. Select the Properties tab from the Datum Axis dialog box and type GEARBOX1 as the Name. Click OK.
rn
al
Module 13 | Page 3
se
To assemble the drill, you must create holes on a number of parts that act as bolt interfaces. You create the holes with predefined shapes that remove material on the front engine block to enable you to insert bolts during assembly.
nl
Scenario
3. With datum axis GEARBOX1 still selected from the (highlighted in green), click Hole Engineering group. Press CTRL and select the surface shown as the second placement reference. from the dashboard. Click To Next Edit the diameter to 6 and click Complete Feature . The datum axis GEARBOX1 serves as the first placement reference. The surface reference is the second placement reference. The surface reference provides you with a starting location defining the depth of the hole. 4. Select the axis GEARBOX1 from the model tree and drag it onto the Hole 1 feature. 5. Expand the Hole 1 feature in the model tree and notice that the axis GEARBOX1 is now embedded in the hole feature and hidden. Embedding the axis GEARBOX1 in the hole feature simplifies the model tree and adds additional design intent to the model. Note that all embedded datums are automatically assigned a hidden display status.
Task 2:
In
PT
Fo r
Axis . Select the cylindrical surface shown in the figure as the reference. Click OK to complete the feature.
Module 13 | Page 4
te
and select
rn
al
2012 PTC
se
nl
3. Click Resume Feature to continue creating the hole feature. Press CTRL and select the surface shown as the second placement reference. from the dashboard. Click To Next Edit the diameter to 6 and click Complete Feature .
. and select
Fo r
2012 PTC
PT
Axis . Select the surface in the location shown in the following figure. Right-click and select Offset References. Press CTRL and select the FRONT and RIGHT datum planes from the model tree. 4. Double-click each distance dimension and type 17.50. Select the Properties tab from the Datum Axis dialog box and type CYLINDER1 as the Name. Click OK to complete the feature.
In
te
rn
al
Module 13 | Page 5
Task 3:
se
4. Expand the Hole 2 feature in the model tree and notice that the axis was created as an embedded datum.
nl
6. Click Resume Feature to continue creating the hole feature. Press CTRL and select the surface shown as the second placement reference. Edit the diameter to 5 and the depth to 10, then click Complete Feature .
7. Click Save from the Quick Access toolbar and click OK to save the model. 8. Click File > Manage Session > Erase Current > Yes to erase the model from memory. This completes the exercise.
Fo r
Module 13 | Page 6
PT
In
te
rn
al
2012 PTC
se
nl
You can edit values from the dashboard or directly from the model.
Scenario
1. Disable all Datum Display types. 2. From the Engineering group, click Hole and select the surface shown as the placement reference. 3. Right-click and select Offset References Collector. Press CTRL and select datum planes FRONT and RIGHT from the model tree as the offset references. You can also drag the reference handles to snap to reference.
Fo r
6. Click Save from the Quick Access toolbar and click OK to save the model. 7. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
PT
You can edit values from the dashboard or directly from the model.
To move the hole to the opposite side of the model, you can either drag the hole using the handles or you can type a negative value. The negative value moves the hole to the opposite side of the RIGHT datum plane.
4. Drag the location, diameter, and depth handles to the approximate positions shown. 5. Edit the diameter to 5 and the depth to 10 in the dashboard. Then select the Placement tab in the dashboard and type 17.5 for the offset values. Click Complete Feature .
In
te
rn
al
se
nl
To assemble the drill, you must create holes on parts that act as bolt interfaces. You create the holes with predefined shapes that remove material on the rear engine block to enable you to insert bolts during assembly.
Scenario
Close Window Erase Not Displayed CHUCK.PRT
Hole\Radial_Diameter Task 1:
Fo r
3. In the graphics window, right-click and select Offset References Collector. Press CTRL and select datum planes FRONT and TOP from the model tree. Select the Placement tab from the dashboard. Edit the angle to 60 and the axial distance to 52.5. Edit the diameter to 5.5 and the depth to 8, as shown.
Module 13 | Page 8
PT
In
te
rn
al
2012 PTC
It is important to select the surface in the quadrant shown below, to ensure that the angle is measured properly.
1. Enable only the following Datum Display type: . . 2. From the Engineering group, click Hole Select the cylindrical surface in the location shown.
se
nl
Add an additional hole to the chuck part for the chuck key.
. .
6. Click Save from the Quick Access toolbar and click OK to save the model. 7. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Fo r
2012 PTC
PT
In
te
rn
al
Module 13 | Page 9
se
nl
Scenario
Close Window Shell\Shell Task 1: Erase Not Displayed FUEL_TANK_SHELL.PRT
1. Disable all Datum Display types. 2. From the Engineering group, click Shell . 3. Select the surface for the shell to remove, as shown. 4. Edit the shell thickness to 1 and click Preview from the dashboard. Feature
7. Click Save from the Quick Access toolbar and click OK to save the model. 8. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Fo r
Module 13 | Page 10
PT
In
5. Click Resume Feature and edit the thickness to 3. 6. Click Complete Feature .
te
rn
al
2012 PTC
se
nl
To complete the drills fuel tank, you hollow out the part and create an opening using a shell which provides the drill with a gasoline storage location.
Fo r
2012 PTC
PT
In
te
rn
al
se
O
Module 14
Module 14 | Page 1
nl
Scenario
Close Window Round\Surface-Edge Task 1: Erase Not Displayed ENG_BLOCK_REAR_1.PRT
2. Click Named Views from the In Graphics toolbar and select ROUND. from the Round types 3. Select Round drop-down menu in the Engineering group. Press CTRL and select the two edges shown. Edit the radius to 2. from the Round Click Preview Feature dashboard. Notice that the Troubleshooter dialog box appears because the rounds overlap. Click Cancel in the Troubleshooter dialog box and click Yes. from the Round Click Cancel Feature dashboard. Click Yes.
Fo r
1. Select Round from the Round types drop-down menu in the Engineering group. Select the surface shown. Press CTRL and select the edge shown. Edit the radius to 4.
Module 14 | Page 2
PT
Task 2:
In
te
rn
al
2012 PTC
se
nl
Create an edge to surface round on a boss that is part of the engine block.
from the Quick Access toolbar 3. Click Save and click OK to save the model. 4. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Fo r
2012 PTC
PT
In
te
rn
al
Module 14 | Page 3
se
nl
Scenario
Close Window Round\Gearbox Task 1: Erase Not Displayed GEARBOX_FRONT.PRT
3. Press CTRL and select the small circular edge to add it to the round set. 4. Type 3 as the radius in the Round dashboard, and notice that both rounds update. 5. Select the Sets tab in the Round dashboard. Select the Edge:F7(PROTRUSION) reference, right-click and select Remove. You can also de-select references by pressing CTRL and selecting the reference. 6. Click Complete Feature dashboard.
PT
Fo r
7. Select Round from the Round types drop-down menu in the Engineering group and select the large circular edge as shown. 8. Edit the radius to 2 and click Complete Feature from the Round dashboard.
Module 14 | Page 4
In
te
rn
al
2012 PTC
2. Select Round from the Round types drop-down menu in the Engineering group and select the large circular edge as shown. Drag the radius handle to 5.
se
nl
In order to reduce stresses and remove sharp edges, add rounds to the front gearbox.
Task 2:
1. Click Named Views from the In Graphics toolbar and select 3D_BACK. from the Round types 2. Select Round drop-down menu in the Engineering group. 3. Select the edge shown and edit its radius to 2. 4. Click Complete Feature .
Task 3:
Fo r
2012 PTC
PT
1. Select the RIB_ROUND from the model tree, right-click, and select Edit Definition. Press CTRL and select the two additional edge references shown.
In
te
rn
al
Module 14 | Page 5
5. Select Round from the Round types drop-down menu in the Engineering group. Select the surface highlighted in green, as shown. Press CTRL and select the edge shown. Drag the radius handle to 6 and click Complete Feature .
se
nl
from the Quick Access toolbar 3. Click Save and click OK to save the model. 4. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Fo r
Module 14 | Page 6
PT
In
te
rn
al
2012 PTC
se
nl
Scenario
Close Window Erase Not Displayed ENG_BLOCK_REAR_2.PRT
Round\Surface-Surface Task 1:
2. Click Named Views from the In Graphics toolbar and select ROUND. from the Round types 3. Select Round drop-down menu in the Engineering group. Press CTRL and click the two surfaces, as shown. Edit the radius to 4.
Fo r
2012 PTC
PT
from the Quick Access toolbar 5. Click Save and click OK to save the model. 6. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
In
te
rn
al
Module 14 | Page 7
se
nl
Create a surface to surface round on a boss that is part of the engine block.
Scenario
In order to reduce stresses and remove sharp edges, add rounds to the connecting rod. Close Window Round\Full Task 1: Erase Not Displayed CONNECTING_ROD.PRT
1. Disable all Datum Display types. 2. Select Round from the Round types drop-down menu in the Engineering group. 3. Press CTRL and select the two edges shown.
Task 2:
Fo r
1. Select Round from the Round types drop-down menu in the Engineering group. 2. Press CTRL and select the two edges as shown. 3. Edit the radius to 2.
PT
5. Click Save from the Quick Access toolbar and click OK to save the model. 6. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
In
te
rn
al
se
nl
Scenario
Close Window Chamfer\Sets Task 1: Erase Not Displayed CRANKSHAFT.PRT
Fo r
The chamfer sets are independent of each other. Selecting references without pressing CTRL creates independent sets. Selecting while pressing CTRL adds/removes references to the same set. Create the second of three chamfer features on CRANKSHAFT.PRT.
Task 2:
1. Select Edge Chamfer and select the edge shown. Select the D1 x D2 dimension scheme in the dashboard. Edit D1 to 2 and D2 to 3 in the dashboard. Click Interchange Distances . in the dashboard. Click Preview Feature
2012 PTC
PT
4. Select the far-right circular edge of the crankshaft (without pressing CTRL). 5. Drag the distance handle to 1, then edit its value to 2, as shown. 6. Click Complete Feature .
In
te
rn
al
Module 14 | Page 9
2. Select Edge Chamfer from the Chamfer types drop-down menu in the Engineering group. 3. Select the far-left circular edge, and edit its value to 2 using the Chamfer dashboard.
se
nl
2. Click Resume Feature . Select the Angle x D dimension scheme in the dashboard. . Click Switch Surfaces Edit the angle to 15 and the distance to 3 by double-clicking the model dimensions. Click Complete Feature .
Task 3:
Fo r
Module 14 | Page 10
PT
In
2. Click Save from the Quick Access toolbar and click OK to save the model. 3. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
te
rn
al
2012 PTC
se
1. Select Edge Chamfer from the Chamfer types drop-down menu. Press CTRL and select the two edges shown. Edit the chamfer distance to 2. Click Complete Feature .
nl
al Fo r
2012 PTC
U PT C In te rn
se
O
Module 15
Project I
Module 15 | Page 1
nl
Fo r
Module 15 | Page 2
PT
In
To help verify the correct datum entities, enable datum tag display for this project.
te
Use the mmns_part_solid template for this and all models in this project.
rn
al
2012 PTC
1. Create a new part named PISTON_PIN.PRT. 2. Enable only the following Datum Display types: . 3. Create the extrude feature, as shown. 4. Save the model and close the window.
se
nl
Task 2:
Fo r
Task 3:
2012 PTC
PT
In
te
The sketch should be symmetric about the vertical reference. Control the upper wall thickness of the piston by placing the sketch on an embedded datum plane, offset from datum plane TOP. Regardless of the length of the original protrusion, the cut should always extrude though the entire model.
rn
al
Module 15 | Page 3
se
nl
Task 4:
1. Create a hole through the model. The hole should be placed on datum plane FRONT and its depth should extend through the entire model in both directions. It should be aligned to datum plane RIGHT.
Fo r
Module 15 | Page 4
PT
In
te
rn
al
2012 PTC
se
1. Apply the Blue_Dark appearance to the model. 2. Save the model and close the window.
Task 5:
nl
Task 3:
Fo r
1. Create coaxial holes at both ends of the connecting rod. The hole depths should extend through the entire model. Create embedded axes to locate each hole.
Task 4:
1. Create a round feature, as shown. Each of the four rounded edges should be driven by the same dimension.
2012 PTC
PT
In
te
rn
al
Module 15 | Page 5
1. Create two extrude features, one at each end of the connecting rod. The extrude features should be symmetric about datum plane FRONT.
se
nl
Task 5:
1. Create a radial hole on the right end of the model. The hole depth should only extend through the next surface.
Fo r
Module 15 | Page 6
PT
In
te
rn
al
2012 PTC
1. Apply the Blue_Dark appearance to the model. 2. Save the model and close the window.
se
Task 6:
nl
Task 2:
Fo r
2012 PTC
PT
In
te
rn
Use a construction circle to control the outer diameter of the lobe and a vertical centerline to imply symmetry.
al
Module 15 | Page 7
se
nl
Task 3:
Task 4:
1. Create a hole, as shown. The hole should be coaxial to the original cylindrical feature.
Fo r
Module 15 | Page 8
PT
The cut's sketch plane should be embedded in the cut feature. The cut should extend through only one side of the crankshaft.
In
Task 5:
te
rn
al
2012 PTC
se
nl
Task 6:
1. Remove material, as shown. The cut should not affect the overall length of the model.
Task 7:
The cut should not affect the overall length of the model.
Task 8:
Fo r
2012 PTC
PT
Bevel the edges of the intake cut and the end of the crankshaft.
Both legs of the chamfer should have the same dimension (D x D).
In
te
rn
al
Module 15 | Page 9
se
nl
Task 9:
1. Apply the Gray_Dark appearance to the model. 2. Save the current orientation to an orientation named 3D. 3. Save the model and close the window.
Fo r
Module 15 | Page 10
PT
In
te
rn
al
2012 PTC
se
nl
Task 2:
Fo r
2012 PTC
PT
1. Create a datum plane offset from datum plane FRONT. Rename the plane to CTR. 2. Create a datum axis at the intersection of datum planes RIGHT and CTR. Rename the axis to CYL. Datum plane CTR and axis CYL are used later in the project as references for other features.
In
te
rn
al
Module 15 | Page 11
se
nl
Task 3:
1. Create a straight three-section parallel blend protrusion, as shown. Sketch on datum plane TOP, and select datum plane CTR as a horizontal dimensioning reference. The second and third blend sections are identical. Specify Straight as the Option.
Task 4:
Fo r
Module 15 | Page 12
PT
In
te
rn
al
2012 PTC
se
nl
Fo r
2012 PTC
PT
In
te
Select datum plane CTR and the silhouette edges of the revolve feature as references. The sketch should be symmetrical about datum plane CTR and mirrored about the vertical centerline. The depth of the feature should be symmetric about datum plane TOP.
rn
al
Module 15 | Page 13
Task 5:
se
nl
Task 6:
1. Create coaxial holes, as shown. Create an embedded datum axis for each hole. The datum axes should be placed through the mounting flange arc centers.
Task 7:
Fo r
Module 15 | Page 14
PT
In
te
rn
al
2012 PTC
se
2. Mirror the two holes to the other side of the engine block. 3. Group the extrude, two holes, and the mirror feature. 4. Rename the group as MOUNT1 .
nl
Fo r
2012 PTC
PT
In
te
rn
al
Module 15 | Page 15
se
3. Create the cylinder bore hole, as shown. 4. Rename this hole as BORE. 5. Save the model and close the window.
nl
Task 2:
Fo r
Module 15 | Page 16
PT
In
te
rn
al
2012 PTC
Create the sketch on datum plane TOP. The sketch should be symmetric about the horizontal reference.
se
nl
Task 3:
1. Create a smooth parallel blend feature, as shown. This blend contains three symmetric rectangular sketches, each 25 mm apart. The first section should use the edges from the revolve feature. Be sure that the start point for each rectangle is at the same location and direction.
Task 4:
Fo r
2012 PTC
PT
In
te
rn
al
Module 15 | Page 17
se
nl
Task 5:
1. Create a shell feature, as shown. Two surfaces are to be removed using this shell feature.
Task 6:
Task 7:
Fo r
Module 15 | Page 18
PT
In
te
rn
al
2012 PTC
se
nl
Task 8:
1. Create an extrude feature, as shown. The extrude feature should extend symmetrically in both directions from the datum plane FRONT.
Fo r
2012 PTC
PT
In
te
rn
al
Module 15 | Page 19
se
Task 9:
nl
Task 10:
1. Create the profile rib feature on an embedded datum, as shown. The rib should be symmetric about the embedded datum. 2. Save the model and close the window.
Fo r
Module 15 | Page 20
PT
In
te
rn
al
2012 PTC
se
nl
Fo r
2012 PTC
PT
In
te
1. Extrude the cut feature, as shown. Create the sketch on the small circular surface on the back of the model, orienting datum plane TOP so that it faces the top.
rn
Task 2:
al
Module 15 | Page 21
se
nl
Sketch on datum plane RIGHT with datum plane TOP facing right.
Task 3:
1. Create an extrude feature with the thicken option, as shown. 2. Rename the extrude to BLADE. Create the sketch on datum plane FRONT so that it extrudes through the model. Dimension the arc using an arc angle dimension.
Task 4:
Fo r
Module 15 | Page 22
PT
In
te
rn
al
2012 PTC
se
nl
Task 5:
1. Create an extrude feature, as shown. The depth of this feature should extend from the end of the blade, inward over the model. 2. Save and close the model.
Fo r
2012 PTC
PT
In
te
rn
al
Module 15 | Page 23
se
nl
Fo r
Module 15 | Page 24
PT
In
te
rn
al
2012 PTC
se
nl
Task 2:
1. Create a constant section sweep protrusion, as shown. Select the predefined I-profile from the Palette as the section to sweep. Relocate the X Location handle to the midpoint of the bottom edge. The section should be symmetric about the vertical reference and above the horizontal reference and trajectory.
Fo r
2012 PTC
PT
In
te
1. Create a sketch feature on an embedded datum plane, as shown. This feature is the trajectory for your next sweep.
rn
Task 3:
al
Module 15 | Page 25
se
nl
2. Create a swept protrusion, as shown. 3. Save the model and close the window.
Fo r
Module 15 | Page 26
PT
In
te
rn
al
2012 PTC
se
nl
Task 2:
Fo r
2012 PTC
PT
In
te
Select the predefined 6sided Hexagon as the section section from the Palette to extrude.
rn
al
Module 15 | Page 27
se
nl
Task 3:
1. Create a round and chamfer, as shown. 2. Apply the Black appearance to the bolt. 3. Save the model.
Fo r
Module 15 | Page 28
PT
In
te
rn
1. Save a copy of the part BOLT_5.PRT. Rename it as BOLT_8.PRT. 2. Close the window. 3. Open the new part BOLT_8.PRT. 4. Edit the length of the model from 5 to 8 and save the model.
al
2012 PTC
Task 4:
se
nl
5. Save a copy of the part BOLT_8.PRT. Rename it as BOLT_12.PRT. 6. Close the window. 7. Open the new part BOLT_12.PRT. 8. Edit the length of the model from 8 to 12. 9. Save the model and close the window.
Fo r
2012 PTC
PT
In
te
rn
al
Module 15 | Page 29
se
nl
Fo r
Module 15 | Page 30
PT
In
te
rn
al
2012 PTC
se
nl
Fo r
2012 PTC
PT
In
te
rn
al
se
O
Module 16
Module 16 | Page 1
nl
Scenario
In this topic, you will create a copy of a boss on the engine block. Close Window Erase Not Displayed
Feature_Operations\Move_Rotate Task 1:
ENG_BLOCK_REAR.PRT
Copy
from the dashboard and Select Rotate select datum axis MAIN. Drag the angle handle counterclockwise and then type 120 for the angle in the dashboard. from the Click Complete Feature dashboard.
Fo r
Module 16 | Page 2
PT
from the Paste types Select Paste Special drop-down menu in the Operations group. Select the Apply Move/Rotate transformations to copies check box. Click OK in the Paste Special dialog box.
In
3. Copy the BOSS_1 group, as shown: With the BOSS_1 group still selected, click
te
rn
al
2012 PTC
1. Enable only the following Datum Display types: . 2. Select Group BOSS_1 from the model tree.
se
nl
9. Click Save from the Quick Access toolbar and click OK to save the model. 10. Click File > Manage Session > Erase Current > Yes to erase the model from memory. This completes the exercise.
Fo r
2012 PTC
PT
In
te
rn
al
Module 16 | Page 3
se
4. Expand Moved Copy 1 and Group COPIED_GROUP in the model tree. Press CTRL, select the datum plane and sketch, right-click, and select Hide. 5. Select Moved Copy 1, right-click, and select Rename. Type BOSS_2 and press ENTER. 6. Select the Group COPIED_GROUP from the model tree, right-click, and select Edit. Double-click the angle dimension and type 100. 7. Expand Group BOSS_1 and select the BOSS_HOLE feature. Double-click the diameter dimension and type 5. Click in the background twice to de-select all features. twice from the Quick Access 8. Click Undo toolbar.
nl
Scenario
In this topic, you will create a copy of an attachment ear on the carburetor. Close Window Erase Not Displayed CARBURETOR_1.PRT
Feature_Operations\Move_Rotate Task 1:
3. Copy the EAR group, as shown: With the EAR group still selected, click Copy from the Operations group. from the Paste types Select Paste Special drop-down menu in the Operations group. Select the Apply Move/Rotate transformations to copies check box. Click OK in the Paste Special dialog box. from the dashboard and Click Translate select datum plane FRONT from the model tree. Drag the offset handle forward, type 23.5, and press ENTER. from the Click Complete Feature dashboard.
Fo r
Module 16 | Page 4
PT
In
te
rn
al
2012 PTC
1. Enable only the following Datum Display types: . 2. Select Group EAR from the model tree.
se
nl
4. Select the Moved Copy, right-click, and select Rename. Type EAR2 and press ENTER. from the Quick Access toolbar 5. Click Save and click OK to save the model. 6. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Fo r
2012 PTC
PT
In
te
rn
al
Module 16 | Page 5
se
nl
Scenario
Close Window Erase Not Displayed CARBURETOR_2.PRT
Feature_Operations\Mirror_Features Task 1:
Fo r
3. Click Save from the Quick Access toolbar and click OK to save the model. 4. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Module 16 | Page 6
PT
In
te
rn
from the Editing group. Click Mirror Select datum plane RIGHT from the model tree. from the Click Complete Feature dashboard.
al
2012 PTC
1. Enable only the following Datum Display types: . 2. Mirror the EAR groups, as shown: Press CTRL and select groups EAR and EAR2 from the model tree.
se
nl
In this topic, you will create a copy of an attachment ear on the carburetor.
al Fo r
2012 PTC
U PT C In te rn
se
O
Module 17
Creating Patterns
Module 17 | Page 1
nl
Scenario
Close Window Erase Not Displayed ENGINE_COVER.PRT
You are assigned to increase the number of vents on the engine cover model. Complete this task quickly using a directional pattern.
Pattern\Direction_Second Task 1:
PT
in the Click Flip Second Direction dashboard. Edit the number of members in the first direction to 3 and its spacing to 23. Edit the number of members in the second direction to 5 and its spacing to 8.
Fo r
from the Quick Access toolbar 6. Click Save and click OK to save the model. 7. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Module 17 | Page 2
In
and select LEFT. Views 3. Select the SIDE_VENT group from the model tree, right-click, and select Pattern. 4. Edit the pattern type to Direction in the dashboard and create a pattern, as shown: Select datum plane FRONT from the model tree as the direction reference. Right-click and select Direction 2 Reference. Select datum plane TOP from the model tree.
te
rn
al
2012 PTC
1. Disable all Datum Display types. 2. From the In Graphics toolbar, click Named
se
nl
Pattern\Axis_First Task 1:
FLYWHEEL.PRT
4. Click Complete Feature from the Pattern dashboard. The pattern takes a few moments to calculate.
Fo r
from the Quick Access toolbar 5. Click Save and click OK to save the model. 6. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
PT
1. Enable only the following Datum Display types: . 2. Select Group BLADE from the model tree, right-click, and select Pattern. 3. In the Pattern dashboard, edit the pattern type to Axis and create a pattern, as shown: Select datum axis CRANK from the model as the axis reference. Drag the angle handle on the model to approximately 45. Edit the number of members in the dashboard from 4 to 6 and then drag the angle handle on the model to approximately 30. In the dashboard, click Set Angular Extent . Edit the number of members in the dashboard from 6 to 16.
In
te
rn
al
se
Close Window
nl
You are assigned to increase the number of blades on the flywheel model. Complete this task quickly using an axial pattern.
Scenario
Exercise 3: Creating Exhaust Cuts in the Muffler using a Two Directional Axis Pattern
Objectives
After successfully completing this exercise, you will be able to: Create axial patterns in two directions.
Scenario
Close Window Pattern\Axis_Second Task 1: Erase Not Displayed MUFFLER_PATTERN.PRT
You are assigned to create exhaust cuts in the muffler model. Complete this task quickly using an axis pattern in two directions.
1. Enable only the following Datum Display types: . 2. From the In Graphics toolbar, click Named and select TOP. Views 3. Select feature EXHAUST from the model tree, right-click, and select Pattern. 4. Select the pattern type Axis in the dashboard and create a pattern, as shown: Select datum axis CENTER from the model as the axis reference. Edit the number of members in the first direction from 4 to 6.
PT
to evenly space Click Set Angular Extent the instances. Edit the number of members in the second direction to 5 with a spacing of 3.
Fo r
Module 17 | Page 4
In
. .
te
rn
al
2012 PTC
se
nl
7. Select Pattern 1 of EXHAUST in the model tree, right-click, and select Edit Definition. Select the Dimensions tab from the dashboard and activate the Direction 2 dimension collector. Select the 0.5 dimension from the graphics window and edit the Increment to 3.
Fo r
2012 PTC
PT
In
9. Click Save from the Quick Access toolbar and click OK to save the model. 10. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
te
rn
al
Module 17 | Page 5
se
nl
Scenario
Close Window Erase Not Displayed CYLINDER_2.PRT
You are assigned to add some rounds to the fins on the cylinder model. Complete this task quickly using a Reference pattern.
Pattern\Reference_Features Task 1:
1. Disable all Datum Display types. 2. Create a full round, as shown: From the In Graphics toolbar, click Named Views and select FIN_CUT. Select Round from the Round types drop-down menu in the Engineering group. Select the upper surface of the fin, as shown. Press CTRL, right-click to query the underside surface of the same fin, and select it. Select the outer thin surface of the fin. from the Click Complete Feature dashboard. 3. Orient to the Standard Orientation. 4. With the previous round still selected, select Pattern from the Pattern types drop-down menu in the Editing group.
Fo r
Module 17 | Page 6
PT
In
te
rn
al
2012 PTC
se
nl
5. Notice that the Reference pattern type is specified in the dashboard. 6. Click Complete Feature . 7. Click Save from the Quick Access toolbar and click OK to save the model. 8. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Fo r
2012 PTC
PT
In
te
rn
al
Module 17 | Page 7
se
nl
Fo r
Module 17 | Page 8
PT
In
te
rn
al
2012 PTC
se
nl
Fo r
2012 PTC
PT
In
te
rn
al
se
O
Module 18
Module 18 | Page 1
nl
While designing a drill at your company, your manager asks you to confirm that the component models adhere to the design specifications. For example, you need to verify the mass properties of the fuel tank to confirm that the raw material estimates are correct. Next, you need to calculate the surface area of the cylinder to confirm the proper thermal cooling. Also, the crankshaft's center of gravity needs to be set along the axis of rotation. Finally, you need to check the engine assembly for interferences between its components. Close Window Analysis\Models Task 1: Erase Not Displayed FUEL_TANK.PRT
Analyze the FUEL_TANK.PRT. Determine the volume of fluid that fits in a full tank. Also determine the volume and mass of material to use when molding the part.
8. Click Accept in the Mass Properties dialog box. 9. Select the Model tab. 10. Click the Operations group drop-down menu and select Resume > Resume All to resume the SHELL TANK feature. 11. In the ribbon, select the Analysis tab.
Fo r
12. Click Mass Properties from the Model Report group. . Click Preview Analysis Notice that the values have updated, as shown in the following figure.
Module 18 | Page 2
PT
5. Select Mass Properties from the Mass Properties types drop-down menu in the Model Report group. 6. Type the Density (kg/mm3) for the nylon fuel tank as 1.2E-6 in the Mass Properties dialog box. in the Mass 7. Click Preview Analysis Properties dialog box. Notice the computed volume and mass values.
In
te
1. Disable all Datum Display types. 2. Click File > Prepare > Model Properties to access the Model Properties dialog box. Notice the current system of units specified in the Units row of the Materials section. 3. Click Close in the Model Properties dialog box.
rn
al
2012 PTC
se
nl
Scenario
13. Note that the volume of the fluid that fills the tank can be computed as follows: VOLUME_BEFORE_SHELL VOLUME_AFTER_SHELL = FLUID_VOLUME 434,300 101,600 = 332,700 MM3 = 0.333 L. 14. The volume of material required to mold the tank model is approximately 101,600 mm3. 15. The mass of material required to mold the tank model is approximately 0.122 KG. in the Mass Properties dialog box. 16. Click Accept 17. Click Save from the Quick Access toolbar and click OK to save the model. 18. Click File > Manage Session > Erase Current > Yes to erase the model from memory. Task 2:
2. Click File > Prepare > Model Properties. Notice the current system of units specified in the Units row of the Materials section. 3. In the Materials section, click change in the Mass Properties row. Type the Density (kg/mm3) for the cylinder as 2.7E-6 and click OK in the Mass Properties dialog box. in the 4. In the Materials section, click Info Mass Properties row. Notice the surface area of the model, as shown in the following figure. 5. The surface area of the model is approximately 64,290 mm2. This is greater than the stated minimum requirement of 50,000 mm2 for air-cooling the engine. If the calculated value does not meet the specification, we could modify the pattern to add additional cooling fins. 6. Close the Mass Properties Report dialog box and click Close in the Model Properties dialog box.
Fo r
2012 PTC
PT
In
te
rn
al
Module 18 | Page 3
se
1. Click Open from the Quick Access toolbar. Select the CYLINDER.PRT and click Open.
nl
Analyze the mass properties of the CYLINDER.PRT. Determine whether the model has adequate surface area for air-cooling the engine. Thermal analysis has indicated that the surface area must be greater than 50,000 mm2.
Task 3:
Determine the diameter of the spark plug hole to ensure that sufficient material is present to tap threads for a standard 16 mm spark plug. At least 2 mm smaller is required.
1. Select the Analysis tab from the ribbon. 2. In the Measure group, select Diameter from the Measure types drop-down menu and select the cylindrical surface of the spark plug hole, as shown. 3. Note that the diameter is 13.75 mm. Since this value is less than 14 mm, it meets the requirement.
Task 4:
1. Orient the model, as shown. from the Measure dialog box. 2. Click Area Select the engine block interface surface, as shown. 3. Note that the area is 1,005.55mm2. Since this value is greater than 850 mm2, it meets the requirement.
Task 5:
1. Orient the model, as shown. from the Measure dialog box. 2. Click Distance Edit the selection filter to Surface. Select the exhaust interface surface, as shown.
Fo r
Module 18 | Page 4
PT
In
te
rn
al
2012 PTC
Measure the area of the base of the cylinder to determine whether there is sufficient surface area to adequately seal the cylinder to the crankcase. For an engine of this displacement, the recommended gasket surface area is at least 850 mm2.
se
nl
3. Reorient the model. 4. Press CTRL and select the carburetor interface surface, as shown. 5. Note that the distance is 62mm. 6. Close the Measure dialog box. from the Quick Access toolbar 7. Click Save and click OK to save the model. 8. Click File > Manage Session > Erase Current > Yes to erase the model from memory. Task 6:
Fo r
2012 PTC
PT
6. Click Mass Properties from the Model . Report group and click Preview Analysis Note that the center of gravity (indicated by the arrow) is below the axis of revolution (horizontal axis of the other coordinate system). The system displays the default coordinate system as a reference when computing model mass properties. in the Mass Properties dialog
In
4. Click Named Views and select RIGHT. 5. Select the Analysis tab from the ribbon.
te
1. Click Open . Select the CRANKSHAFT.PRT and click Open 2. Click File > Prepare > Model Properties. Notice the current system of units specified in the Units row of the Materials section. 3. In the Materials section, click change in the Mass Properties row. Type the Density (kg/mm3) for the steel crankshaft as 7.8E-6 and click OK in the Mass Properties dialog box. Click Close in the Model Properties dialog box.
rn
al
Module 18 | Page 5
se
Analyze the mass properties of the CRANKSHAFT.PRT. Determine the location of the center of gravity (COG) on the model.
nl
Task 7:
Measure the CRANKSHAFT.PRT. Determine the length of the keyway slot. This length must be between 11 mm and 12 mm so the flywheel key does not shear during normal operating conditions.
1. Reorient the model. from 2. In the Measure group, select Length the Measure types drop-down menu. Select the edge of the keyway. 3. Note that the distance is approximately 8.19mm. This value does not meet the requirement. and 4. In the Measure dialog box, click Save select Save Analysis. Type KEYWAY_LENGTH in the text box field and click OK. Close the Measure dialog box. 5. Click Saved Analysis from the Manage group to open the Saved Analysis dialog box. Click All > Hide All. This hides the analysis from the graphics window. Close the Saved Analysis dialog box. 6. Select the KEYWAY feature from the model tree, then right-click and select Edit. Edit the diameter from 13 to 15.5. Click twice in the background of the graphics window to de-select all features. from the Manage 7. Click Saved Analysis group, and double-click the KEYWAY_LENGTH analysis in the Saved Analysis dialog box.
8. Note that the distance is now 11.75mm. This value meets the requirement. If the Saved Analysis is left unhidden, the result of the analysis automatically updates in the graphics window. Icons enable you to easily determine whether the analysis is unhidden or hidden. 9. Close the Measure dialog box. 10. In the Saved Analysis dialog box, select the KEYWAY_LENGTH analysis and click Delete to delete it. Analysis 11. Close the Saved Analysis dialog box.
Fo r
Module 18 | Page 6
PT
In
te
rn
al
2012 PTC
se
nl
Task 8:
1. Orient to the standard orientation. from the 2. In the Measure group, select Angle Measure types drop-down menu. Edit the Selection Filter to Surface. Select the left surface. Press CTRL and select the right surface.
Task 9:
Fo r
1. Click Open from the Quick Access toolbar. Select ENGINE.ASM and click Open.
2012 PTC
PT
from the Quick Access toolbar 6. Click Save and click OK to save the model. 7. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
In
4. In the Measure dialog box, select Supplement from the Angle drop-down list. The angle is now approximately 150. 5. Close the Measure dialog box.
te
rn
al
Module 18 | Page 7
se
nl
2. Select the Analysis tab from the ribbon. 3. Click Mass Properties from the Model Report group and click Preview Analysis The components of the engine have been assigned appropriate density values for either steel or aluminum. 4. Note the displayed values for volume, surface area, average density, mass, and center of gravity. to complete the feature and 5. Click Accept close the Mass Properties dialog box. Task 10: Analyze interferences within ENGINE.ASM components. .
Task 11:
1. Resolve the interferences in ENG_BLOCK_ FRONT.PRT by editing the depth of the ALIGN_PINS, as shown in the figure. Select ENG_BLOCK_FRONT.PRT from the model. Right-click and select Open. Select the ALIGN_PINS feature from the model tree. Right-click and select Edit Definition. Drag the depth handle to 5, editing it if necessary. Click Complete Feature .
Fo r
Module 18 | Page 8
PT
In
te
rn
al
2012 PTC
1. In the Inspect Geometry group, select Global Interference from the Global Interference types drop-down menu and click Preview . Notice that there is one pair of Analysis interfering components. 2. The ENG_BLOCK_REAR.PRT interferes (areas in dark red) with the ENG_BLOCK_FRONT.PRT in around the alignment pins. Click Accept the Global Interference dialog box.
se
nl
2. Click Close
from the Global Interference 3. In the Inspect Geometry group, select Global Interference . types drop-down menu and click Preview Analysis 4. The Message Log indicates that there are no interfering parts. in the Global Interference dialog box. 5. Click Accept 6. Press CTRL+G to regenerate the assembly. 7. Click Save from the Quick Access toolbar and click OK to save the model. and OK to erase
Fo r
2012 PTC
PT
In
te
rn
al
Module 18 | Page 9
se
nl
8. Click File > Manage Session > Erase Current, then click Select All the model from memory.
Fo r
Module 18 | Page 10
PT
In
te
rn
al
2012 PTC
se
nl
Fo r
2012 PTC
PT
In
te
rn
al
se
O
Module 19
Module 19 | Page 1
nl
Scenario
Close Window
Task 1:
Create ENGINE.ASM.
Fo r
7. Click Assemble . Select ENG_BLOCK_ FRONT.PRT and click Open. 8. Reorient the component approximately, as shown.
Module 19 | Page 2
PT
It is a standard practice to constrain the initial component in an assembly using the Default constraint type.
In
te
4. Select Assemble from the Assemble types drop-down menu in the Component group, select ENG_BLOCK_REAR.PRT, and click Open. from the
rn
al
1. Click New from the Quick Access toolbar, and select Assembly as the Type. Type engine as the Name, clear the Use default template check box, and click OK. 2. In the New File Options dialog box, select mmks_asm_design as the Template, and click OK. 3. Disable all Datum Display types.
se
2012 PTC
Assembly\Automatic-Bs
Assemblies are used to combine parts into larger models. These models can either be a top-level model, which represents the entire product, or a subassembly, that will be further assembled. You are assigned to begin creating the engine assembly, used later in the top-level drill assembly.
nl
9. Zoom in and select the cylindrical surfaces on an alignment pin and its corresponding hole, as shown by the selection arrows below. Rotate the assembly, if necessary. To easily select the surfaces, zoom in before selecting.
10. Spin the assembly, as shown. 11. Select surfaces from the other pin and hole. 12. Select the Placement tab and notice that a Coincident constraint and Oriented constraint have been automatically created. 13. Notice that the 3D Dragger has dynamically updated to only allow movement in the unconstrained degrees of freedom.
Fo r
2012 PTC
PT
In
14. Select the two surfaces, as shown by the selection arrows. 15. Notice that this selection has created another Coincident constraint. from the 16. Click Complete Component dashboard.
te
rn
al
Module 19 | Page 3
se
nl
17. Orient the assembly to the Standard Orientation. 18. Click Assemble . Select CYLINDER.PRT and click Open. 19. Use the 3D Dragger to position the component approximately as shown.
Fo r
Module 19 | Page 4
PT
In
21. Spin the assembly and select cylindrical surfaces from the other pair of corresponding holes, as shown.
te
rn
al
2012 PTC
se
20. Zoom in and select the cylindrical surfaces from a pair of corresponding holes, as shown.
nl
22. Select the two mating surfaces, as shown. 23. Edit the constraint Type to Coincident necessary. 24. Click Complete Component . , if
from the Quick Access toolbar and click OK to save the model.
Fo r
2012 PTC
PT
In
te
rn
al
Module 19 | Page 5
se
26. Click File > Manage Session > Erase Current, then click Select All the model from memory.
nl
and OK to erase
Scenario
Close Window
Assembly\Automatic-Bs Task 1:
Fo r
7. Click Assemble , select CHUCK_COLLAR. PRT, and click Open. 8. Use the 3D Dragger to position the component approximately, as shown.
Module 19 | Page 6
PT
It is a standard practice to constrain the initial component in an assembly using the Default constraint type.
In
4. Select Assemble from the Assemble types drop-down menu in the Component group, select CHUCK.PRT, and click Open. 5. Right-click and select Default Constraint. 6. Click Complete Component .
te
rn
1. Click New from the Quick Access toolbar, and select Assembly as the Type. Type drill_chuck as the Name, clear the Use default template check box, and click OK. 2. In the New File Options dialog box, select mmks_asm_design as the Template, and click OK. 3. Disable all Datum Display types.
al
Create DRILL_CHUCK.ASM.
se
2012 PTC
Assemblies are used to combine parts together into larger models. These models can either be a top-level model, which represents the entire product, or a subassembly, that will be further assembled. You are assigned to begin creating the drill chuck assembly, used later in the top-level drill assembly.
nl
12. In the dashboard, edit the constraint Type to . Type -10 to establish a better Distance view of the offset and direction. 13. Edit the offset value to 1 and click Complete from the dashboard. Component The CHUCK_COLLAR.PRT is assembled as fully constrained by selecting the Allow Assumptions option. In this case, the rotation of the component is not important.
Fo r
2012 PTC
PT
In
te
rn
11. Select the two surfaces on the back to create a Coincident constraint, as shown.
al
Module 19 | Page 7
se
10. Spin the assembly, as shown. Drag the translation arrow to place the component towards the front of the assembly.
nl
14. Click Assemble , select STANDARD_BIT. PRT, and click Open. 15. Orient the assembly, as shown. Use the 3D Dragger to position the component approximately as shown.
PT
Fo r
21. Click Save from the Quick Access toolbar and click OK to save the model. 22. Click File > Manage Session > Erase Current, then click Select All model from memory. and OK to erase the
Module 19 | Page 8
In
te
17. Drag the drill bit back out of the chuck using the 3D Dragger. 18. Select the end of the bit and the bottom inside surface of the chuck to create a Coincident constraint, as shown. , if
rn
al
2012 PTC
se
nl
Scenario
Close Window
7. Click Assemble , select FLYWHEEL.PRT, and click Open. 8. Spin the assembly slightly. 9. Use the 3D Dragger to position the component approximately as shown.
Fo r
2012 PTC
PT
In
4. Select Assemble from the Assemble types drop-down menu in the Component group, select CRANKSHAFT.PRT, and click Open. 5. Right-click and select Default Constraint. 6. Click Complete Component .
te
rn
1. Click New from the Quick Access toolbar, and select Assembly as the Type. Type crank as the Name, clear the Use default template check box, and click OK. 2. In the New File Options dialog box, select mmks_asm_design as the Template, and click OK. 3. Disable all Datum Display types.
al
se
Module 19 | Page 9
Assemblies are used to combine parts together into larger models. These models can either be a top-level model, which represents the entire product, or a subassembly, that will be further assembled. You are assigned to begin creating the crank assembly, used later in the top-level drill assembly.
nl
Fo r
PT
12. Enable Plane Display . 13. Right-click in the graphics window and select New Constraint. 14. Zoom in on the assembly. 15. Select the KEY datum planes from each component to create a Coincident constraint.
18. Click Save from the Quick Access toolbar and click OK to save the model. 19. Click File > Manage Session > Erase Current, then click Select All model from memory. and OK to erase the
Module 19 | Page 10
In
te
rn
al
2012 PTC
se
nl
Scenario
Close Window
Fo r
7. Click Assemble . Select PISTON_PIN.PRT and click Open. 8. Select cylindrical surfaces to create a Coincident constraint, as shown.
2012 PTC
PT
In
4. Select Assemble from the Assemble types drop-down menu in the Component group, select PISTON.PRT, and click Open. 5. Right-click and select Default Constraint. 6. Click Complete Component .
te
rn
1. Click New from the Quick Access toolbar, and select Assembly as the Type. Type piston as the Name, clear the Use default template check box, and click OK. 2. In the New File Options dialog box, select mmks_asm_design as the Template, and click OK. 3. Disable all Datum Display types.
al
se
Module 19 | Page 11
Assemblies are used to combine parts together into larger models. These models can either be a top-level model, which represents the entire product, or a subassembly, that will be further assembled. You are assigned to begin creating the piston assembly, used later in the top-level drill assembly.
nl
9. Use Find to select the next set of assembly references: Click Find from the status bar to start the Search Tool. Select Datum Plane as the Look for option, select PISTON_PIN.PRT as the Look in object, and click Find Now. Select FRONT:F3(DATUM PLANE), click Add Item , and click Close. Click Find to start the Search Tool. Select Datum Plane as the Look for option, select PISTON.PRT as the Look in object, and click Find Now. Select FRONT:F3(DATUM PLANE), click Add Item , and click Close. Click Complete Component . Using Find assemblies.
Fo r
Module 19 | Page 12
PT
12. Select cylindrical surfaces from the PISTON_RING.PRT and the PISTON.PRT, as shown.
In
te
rn
al
2012 PTC
10. Click Assemble , select PISTON_RING.PRT, and click Open. 11. Use the 3D Dragger to position the component approximately, as shown.
se
nl
13. Select the planer surfaces from the PISTON_RING.PRT and the PISTON.PRT, as shown.
18. Click Save from the Quick Access toolbar and click OK to save the model. 19. Click File > Manage Session > Erase Current,
Fo r
2012 PTC
PT
In
te
rn
al
Module 19 | Page 13
se
14. In the dashboard, select the Placement tab. Clear the Allow Assumptions check box. 15. Use the 3D Dragger to rotate the piston ring gap to the front. 16. Right-click and select Fix Constraint.
nl
Fo r
Module 19 | Page 14
PT
In
te
rn
al
2012 PTC
se
nl
Fo r
2012 PTC
PT
In
te
rn
al
se
O
Module 22
Module 22 | Page 1
nl
Close Window
Drawing_Views\Engine Task 1:
1. Disable all Datum Display types. 2. Click View Manager from the In Graphics toolbar and select the Sections tab. 3. In the Sections tab of the View Manager dialog box, select cross-section A to display it in the graphics window, as shown. 4. Click Close .
Task 2:
1. Click File > New > Drawing and type drill_components. Clear the Use default template check box and click OK to continue. 2. Notice that PISTON.PRT is selected as the Default Model. Select Use template, click Browse, select DRAWING_TEMPLATE.DRW, and click Open. 3. Click OK. Type your first initial, followed by your surname, and press ENTER 4. Note that the drawing template automatically creates three standard views (front, top, right) without displaying any hidden lines. 5. Click Model Tree to toggle off the model tree.
Fo r
The drawing template is a special drawing *.drw file that configures new drawings. In this case, it has also loaded a format *.frm file containing a title block.
Module 22 | Page 2
PT
In
te
rn
al
2012 PTC
se
The Manufacturing Department needs to begin planning the tooling necessary to create the piston part. You must show projected, cross-sectional, and detailed views of the piston. Additionally, a drawing of the completed engine assembly is required to begin planning the assembly process for the engine. For this, you create a second sheet that displays the engine assembly in an exploded state and includes a Bill of Materials.
nl
Scenario
Task 3:
1. Select the front view (VIEW_TEMPLATE_1), right-click, and select Insert Projection View. Select a point under the front view to create the bottom view, as shown.
Fo r
2012 PTC
PT
2. Create a projected view with a cross-section, as shown: Select the front view, right-click, and select Insert Projection View. Select a location to the left of the front view to place the view. With the view still selected, right-click, and select Properties. Select the Sections category in the Drawing View dialog box, select 2D cross-section, and click Add Section . Select section A and click Apply > Close. Right-click and select Add Arrows. Select the front view to place the arrows. Right-click and clear Lock View Movement, if necessary. Select and move the bottom view downward, away from the section arrows. (Move views by first clicking to select them and then clicking and dragging to relocate them.) Click in the background to de-select all views.
In
te
rn
al
Module 22 | Page 3
se
nl
Task 4:
1. Create a detail view, as shown: from the Model Views group Click Detailed in the Layout tab. Zoom in and select an edge of the ring groove cut in the right view (VIEW_TEMPLATE_3) as the detail center point. Click points to create a spline curve around the selected ring groove cut. Do NOT close the spline curve when sketching it. Instead, leave a gap. Middle-click to complete the spline curve.
2. Place the detail view, as shown: Select a point to the right of the top view (VIEW_TEMPLATE_2) to place the detailed view. Click in an empty area of the graphics window to de-select the view. Select the view note, double-click the 4.000 scale on the view, type 5, and press ENTER. Click in an empty area of the graphics window to de-select the scale value. Select the detail note in the right view. Drag it to reposition it as necessary.
Fo r
Module 22 | Page 4
PT
In
te
rn
al
2012 PTC
se
nl
Task 5:
Task 7:
Fo r
1. Click anywhere in the drawing background to de-select the previous view. 2. Click Drawing Models from the Model Views group in the Layout tab. Click Add Model from the menu manager. Select ENGINE.ASM and click Open. Click Done/Return from the menu manager. 3. Click New Sheet . Type your first initial, followed by your surname, and press ENTER.
2012 PTC
PT
You can also change the Display Style of views to display hidden lines. Create a view of ENGINE.ASM.
1. Manipulate the drawing, as shown: Select and drag views to arrange them, as shown. (Move views by first clicking to select them and then clicking and dragging to relocate them.) Select the cross-section view, right-click, and select Properties. Select the View Display category. Select None as the Tangent edges display style. Click OK.
In
te
rn
al
Module 22 | Page 5
Task 6:
1. If necessary, click Refit , and click in the drawing background to de-select all items. 2. Create a general view, as shown: Right-click and select Insert General View. Click OK in the Select Combined State dialog box. Select a point in the upper-right corner of the sheet. Move the Drawing View dialog box away from the view location. In the Drawing View dialog box, select the 3D orientation and click Apply. Select the Scale category, select Custom scale, type 3, and click Apply. Select the View Display category and edit the Display style to Shading. Click Apply > Close.
se
nl
4. Create a general view, as shown: Right-click and select Insert General View. Click OK to accept the No Combined State selection. Select a point near the upper-right corner of the sheet. Select EXPLODE_ORIENTATION as the Model view name and click Apply. Select the Scale category and verify that Default scale for sheet is selected. Select the View Display category. Select Shading as the Display style. Click Apply > Close. Double-click the scale in the lower-left corner of the screen, type 1, and press ENTER. Task 8: Configure the view to display an explode state.
Fo r
Module 22 | Page 6
PT
3. Click Save from the Quick Access toolbar and click OK to save the model. 4. Click File > Manage Session > Erase Current, and OK to erase the
In
to toggle it on.
te
1. Manipulate the view, as shown. Select the view, right-click, and select Properties. Select the View States category and select the Explode components in view check box. Select ENGINE_EXPLODE from the Assembly explode state drop-down list. Click Apply > Close. Move the view, as necessary.
rn
al
2012 PTC
se
nl
Fo r
2012 PTC
PT
In
te
rn
al
se
O
Module 23
Module 23 | Page 1
nl
Close Window
Drawing_Details\Annotating Task 1:
Fo r
Module 23 | Page 2
PT
6. Click Clear All in the Show Model Annotations dialog box. 7. Leave the Show Model Annotations dialog box open for now.
In
4. Click Show Model Annotations from the Annotations group. 5. In the Show Model Annotations dialog box, verify is selected. that the Dimensions Tab Select PISTON.PRT from the model tree.
te
rn
al
2012 PTC
1. Disable all Datum Display types. 2. Select the Sheet 1 sheet tab to activate it.
se
nl
You are continuing to work on the piston and engine drawings and add the dimensional detail needed by Manufacturing. You need to add the piston dimensions that are necessary for machining. Additionally, you need to add a BOM and Balloons that label each part of the engine assembly.
Scenario
Task 2:
1. Select Cut id 1963 from the model tree. 2. Click Select All in the Show Model Annotations dialog box. 3. Note that the dimensions are displayed in various views, as shown. in the Show Model 4. Click Clear All Annotations dialog box. 5. Leave the Show Model Annotations dialog box open for now.
Task 3:
Fo r
2012 PTC
PT
in the Show Model Click Select All Annotations dialog box. Clear the check box for the d32 dimension. Click Apply.
In
1. Show the dimensions of the ring groove so they appear only in the detail view, as shown: Select the ring groove F16(CUT) from the detail view.
te
rn
al
Module 23 | Page 3
se
nl
Fo r
in the Show Model Click Select All Annotations dialog box. Click Apply. Leave the Show Model Annotations dialog box open for now. When working outside of the context of the Show Model Annotations dialog box, you can also select a view, right-click, and select Show Model Annotations when the Annotate tab is selected in the drawing ribbon.
Module 23 | Page 4
PT
1. Show all the dimensions in the front view, as shown in the figure: Select the front view.
Task 4:
In
te
rn
al
2012 PTC
3. In the Show Model Annotations dialog box, select the d40 dimension check box. Click Apply. 4. Leave the Show Model Annotations dialog box open for now.
se
nl
2. Show the remaining dimensions on the drawing: Select PISTON.PRT from the model tree. in the Show Model Click Select All Annotations dialog box. Click Apply > Cancel.
3. In the detail view, select and drag the two 1.5 dimensions so they are better oriented on the drawing view, as shown. 4. Drag the handles at the ends of the witness lines to position them appropriately.
Fo r
2012 PTC
PT
In
te
rn
al
Module 23 | Page 5
se
nl
Task 5:
Task 6:
A drawing dimension that is located beneath other dimensions can be selected by placing your cursor over the dimension, right-clicking to query, and clicking to select it. Also, use care to select the appropriate dimension as there are multiple 360, 12, and 25 dimensions that belong to completely different features.
Fo r
Module 23 | Page 6
PT
In
1. Select one of the 360 dimensions on the top view. Right-click and select Delete. Repeat for the second 360 dimension.
te
rn
al
2012 PTC
1. Select Dimension - New References from the Dimension types drop-down menu in the Annotations group. Select On Entity from the menu manager, if necessary. Zoom in and select the edges shown in the figure. Middle-click to place the dimension, also shown in the figure. Click Return from the menu manager when finished. 2. With the 12 dimension still selected, right-click and select Properties. Select the Display tab. Select the Prefix field, click Text Symbol, select (diameter), and click Close > OK. Click in an empty area of the graphics window to de-select the dimension.
se
nl
Fo r
9. Select the R3 dimension from the top view and select Move to View from the Edit group. Select the bottom view. 10. With the R3 dimension still selected, right-click and select Edit Attachment. Select the bottom-right purple edge of the highlighted round in the bottom view and middle-click. 11. Move the dimension to the outside of the view. Right-click and select Flip Arrows. Right-click and select Flip Text.
2012 PTC
PT
7. Select the detail view note and move it to the right. 8. Select the upper 1.5 dimension on the detailed view and drag it below the view. Drag the handles at the ends of the witness lines to position them appropriately.
In
te
rn
5. In the front view, select the 16 dimension and drag it to the left until it snaps to the 14 dimension. 6. With the 16 dimension still selected, drag the handles at the ends of the witness lines to position them appropriately.
al
Module 23 | Page 7
se
nl
2. Select the 8 dimension on the front view, right-click, select Move Item to View, and select the left cross-section view. 3. Select the 12 dimension on the left cross-section view and drag the dimension outside of the view. Right-click and select Flip Arrows. 4. Drag the handles at the ends of the witness lines to position them appropriately.
12. Continue using these methods to clean the drawing, as shown in the following figure.
Task 7:
Fo r
from the Click Regenerate Active Model Update group to update the model and the drawing.
Module 23 | Page 8
PT
1. Select the Review tab in the drawing ribbon. 2. Edit the dimensions of the piston ring groove in the model, as shown in the figure: Edit the dimensions of the ring groove so that it is 2 mm wide and 1 mm deep.
In
te
rn
al
2012 PTC
se
nl
3. Edit the dimensions of the piston ring groove height in the model, as shown in the following figure: Select the d32:F16(CUT) groove height dimension. Edit the dimension to 26.5 and click to update the Regenerate Active Model model and the drawing. There are two 25 dimensions: d32 controls the height of the groove cut and d5 controls the height of the inner piston cut. To determine the correct dimension, you can pre-select the dimension. When you pre-select a dimension, a pop-up note appears, indicating which dimension you are pre-selecting. 4. Select PISTON.PRT from the model tree, right-click, and select Open. Select the revolved ring groove cut, right-click, and select Edit to view the modified dimensions.
5. Double-click each dimension, and type the original values (1.5 x 1.5 and 25). 6. Click twice in the background to de-select all geometry.
Fo r
2012 PTC
PT
7. Click Close to return to the DRILL_COMPONENTS.DRW. Notice that the dimensions have updated automatically in the drawing. from the Quick Access toolbar and click OK. Note that this also saves the
In
te
rn
al
Module 23 | Page 9
se
nl
Task 8:
1. Select the Sheet 2 sheet tab to activate it. 2. Close the model tree by clicking Model Tree 3. Select the Table tab in the drawing ribbon. .
Fo r
Module 23 | Page 10
PT
In
te
rn
al
2012 PTC
se
This parametric table was created with repeat regions. Repeat regions are special table cells that contain parametric notes. Parametric notes automatically update if components are modified (assembled, deleted, renamed, or suppressed).
4. Click Table From File from the Table group. Select BOM_TABLE.TBL and click Open. Place the table in the upper-left corner of the sheet. 5. Double-click the sheet scale in the lower-left corner of the sheet and type 0.8. 6. Select the view. 7. Right-click and clear the Lock View Movement option, if necessary. 8. Drag the view, as shown in the figure.
nl
Task 9:
1. Click Create Balloons from the Balloons group and select Create Balloons - All. 2. Click and drag the Balloons to arrange them, as shown in the figure. You can select Cleanup Balloons to organize the Balloons. You can also select a BOM Balloon, right-click, and select Edit Attachment to change the component geometry to which the BOM Balloon points.
PT
In
te
rn
Fo r
4. Click Save
from the Quick Access toolbar and click OK to save the model. and OK to erase
5. Click File > Manage Session > Erase Current, then click Select All the model from memory.
2012 PTC
al
.
Module 23 | Page 11
se
nl
Fo r
Module 23 | Page 12
PT
In
te
rn
al
2012 PTC
se
nl
al Fo r
2012 PTC
U PT C In te rn
se
O
Module 24
Using Layers
Module 24 | Page 1
nl
Scenario
View\Layers_Muffler Task 1:
MUFFLER.PRT
4. Notice that there are a number of datum features visible in the model.
5. Review the model tree and notice that there are several hidden sketches (Sketch 1-6). These sketches were automatically hidden during the creation of features. from the Visibility group to 6. Click Layers enable it. Expand the Hidden Items layer and notice that the hidden sketches from the model tree are listed, as well as a datum plane. Select the MOUNT datum plane in the layer tree to locate it on the model.
Fo r
Module 24 | Page 2
PT
In
te
rn
al
2012 PTC
U
.
1. Enable only the following Datum Display types: 2. In the ribbon, select the View tab.
se
Close Window
nl
While working on the MUFFLER.PRT, you discover that you need to remove unnecessary reference geometry by creating and managing layers effectively. You need to examine the default layers in the MUFFLER.PRT, create a layer for the exhaust holes, and manually hide the axes.
7. Click in the graphics window to clear the display of the MOUNT plane. 8. Expand the 01__PRT_ALL_DTM_PLN and 01__PRT_DEF_DTM_PLN layers. Notice that datums RIGHT, TOP, and FRONT are common, but the 01__PRT_ALL_DTM_PLN layer contains additional items. Also notice that the symbol for each layer is different.
Fo r
2012 PTC
PT
If you need to save the layer status when saving the model, you must manually save the status of Hidden/Shown layers to the model.
13. Select Save Status from the Status types drop-down menu in the Visibility group to save this layer display configuration in the model.
In
. Notice that all planes are now removed from the display.
te
12. Select the 01__PRT_ALL_DTM_PLN layer, right-click, and select Hide. Then click Repaint
rn
. Notice that the default planes are removed from the display.
al
Module 24 | Page 3
9. Select the 01__PRT_DEF_DTM_PLN layer, right-click, and select Layer Properties. Notice that the Contents tab displays the three datum features. Select the Rules tab and notice that there are no rules present. Click OK. 10. Select the 01__PRT_ALL_DTM_PLN layer, right-click, and select Layer Properties. Notice that the Contents tab displays the five datum features. Select the Rules tab and notice that there are two rules present. Click OK. 11. Select the 01__PRT_DEF_DTM_PLN layer, right-click, and select Hide. Then click Repaint
se
nl
Task 2:
1. In the layer tree, right-click and select New Layer. Type EXH_HOLES as the Name in the Layer Properties dialog box. Leave the dialog box open. In the top of the layer tree, click Show and select Model Tree. Select the last four holes in the model tree. Click OK in the Layer Properties dialog box.
Task 3:
Fo r
2. Click Layers from the Visibility group to enable it. Expand the Hidden Items layer and notice that the HOLE_1 and HOLE_2 axes are contained within this layer. 3. In the layer tree, right-click and select Save Status to save this latest layer display configuration to the model.
PT
5. Click Save from the Quick Access toolbar and click OK to save the model. 6. Click File > Manage Session > Erase Current > Yes to erase the model from memory.
Module 24 | Page 4
In
te
rn
. The axis features Hide. Then click Repaint are hidden, and the hole axes remain visible.
al
2012 PTC
1. In the top of the layer tree, click Show and select Model Tree. Press CTRL and select axes HOLE_1 and HOLE_2, right-click, and select
se
. Notice that the hole axes are Repaint hidden, but the holes themselves remain.
nl
2. In the top of the model tree, click Show and select Layer Tree. Select the EXH_HOLES layer, right-click, and select Hide. Then click
al Fo r
2012 PTC
U PT C In te rn
se
O
Module 28
Project II
Module 28 | Page 1
nl
Projects\Intro-2_working Task 1:
1. Create a new part named FLANGE.PRT. 2. Enable only the following Datum Display types: . 3. Create the extrude feature as shown. Use the mmns_part_solid template for this and all models in this project. To help verify the correct datum entities, enable datum tag display for this project.
Task 2:
Fo r
Module 28 | Page 2
PT
In
te
rn
al
2012 PTC
se
nl
Task 3:
Fo r
2012 PTC
PT
In
te
rn
al
Module 28 | Page 3
1. Apply the Blue_Dark appearance to the model. 2. Save the model and close the window.
Task 4:
se
nl
Task 2:
Fo r
Module 28 | Page 4
PT
In
te
rn
1. Apply the Silver appearance to the model. 2. Save the model and close the window.
al
2012 PTC
se
nl
to evenly
Task 2:
Fo r
2012 PTC
PT
In
te
rn
al
Module 28 | Page 5
se
nl
2. Reorder the BORE hole feature so it removes material from the fins, as shown.
Fo r
Module 28 | Page 6
PT
In
te
rn
al
2012 PTC
se
nl
Task 3:
Fo r
2012 PTC
PT
In
te
rn
al
Module 28 | Page 7
se
nl
Task 4:
1. Apply the Silver appearance to the model. 2. Create a cross-section named A. 3. Save the model and close the window.
Fo r
Module 28 | Page 8
PT
In
te
rn
al
2012 PTC
se
nl
Task 2:
Fo r
2012 PTC
PT
In
te
rn
al
Module 28 | Page 9
se
nl
Task 3:
Mirror the hole and rib features, and round the mounting flange corners.
1. Mirror both the attach hole and strengthening rib about datum plane FRONT, as shown. 2. Round the corners as shown.
Fo r
Module 28 | Page 10
PT
In
te
3. Mirror the mounting flange, ribs, holes, and rounds about datum plane RIGHT to the front of the model as one operation.
rn
al
2012 PTC
se
nl
Task 4:
1. Apply the Blue_Dark appearance to the model. 2. Save the model and close the window.
Fo r
2012 PTC
PT
In
te
rn
al
Module 28 | Page 11
se
nl
Fo r
Module 28 | Page 12
PT
In
te
1. Create a hole, as shown. 2. Select the Move/Rotate option in the Paste Special dialog box to create the second dependent offset hole.
rn
al
2012 PTC
Task 2:
se
nl
3. Create a hole, as shown. 4. Select the Move/Rotate option in the Paste Special dialog box to create the second dependent offset hole. The holes should only drill to the next surface. When possible, reference more stable surface geometry rather than edges and vertices when creating features. This practice creates more robust models that are easier to modify.
Task 3:
Fo r
2012 PTC
PT
In
te
rn
al
Module 28 | Page 13
se
nl
Task 4:
Apply the same holes and rounds to the other side of the frame.
1. Adjust the feature order so the holes and rounds are on both sides of the frame. 2. Apply the Gray_Dark appearance to the frame. 3. Save the model and close the window.
Fo r
Module 28 | Page 14
PT
In
te
rn
al
2012 PTC
se
nl
Task 2:
Fo r
2012 PTC
PT
Clearing the Allow Assumptions check box enabled you to leave the CONNECTING_ROD.PRT a Packaged component, rather than a fully constrained component, of the assembly. This is the desired design intent, as the other half of the CONNECTING_ROD.PRT is ultimately assembled to another model.
In
te
1. Assemble the CONNECTING_ROD.PRT. 2. Assemble the hole in the CONNECTING_ ROD.PRT (the end without a lubrication hole) Coincident with the PISTON_PIN.PRT. 3. Assemble the FRONT datum planes of both parts Coincident. 4. Clear the Allow Assumptions check box and complete the component.
rn
al
Module 28 | Page 15
se
nl
5. Drag the packaged CONNECTING_ROD.PRT to a position, as shown. 6. Save the model, close the window, and erase all models from session. The Drag Component functionality is only valid for packaged components.
Fo r
Module 28 | Page 16
PT
In
te
rn
al
2012 PTC
se
nl
Fo r
2012 PTC
PT
In
te
rn
al
Module 28 | Page 17
se
nl
Fo r
Module 28 | Page 18
PT
In
te
rn
al
2012 PTC
se
nl
Task 2:
Fo r
2012 PTC
PT
In
te
rn
al
Module 28 | Page 19
se
nl
2. Open the PISTON_ASSY.ASM. 3. Convert the existing CONNECTING_ROD.PRT constraints to connections. To convert the constraints to connections, you must clear the Allow Assumptions check box. 4. Return to the ENGINE.ASM and assemble the PISTON_ASSY.ASM, creating a Cylinder connection between the piston and engine block, as shown.
Fo r
Module 28 | Page 20
PT
In
te
rn
al
2012 PTC
se
nl
5. Before completing the sub-assembly placement, add a second connection set, creating a Cylinder connection between the crankshaft and connecting rod, as shown.
Task 3:
1. Create a new assembly named ENGINE_ BLOWER.ASM. 2. Assemble the FRAME.PRT in the Default location. 3. Orient the assembly as shown and save a view called 3D-1.
Fo r
2012 PTC
PT
In
te
rn
6. Apply the Silver_Transparent appearance to the engine block component. 7. Save the assembly and close the window.
al
Module 28 | Page 21
se
nl
Task 4:
Fo r
Module 28 | Page 22
PT
In
te
rn
al
2012 PTC
se
nl
Fo r
2012 PTC
PT
In
te
rn
al
Module 28 | Page 23
se
nl
Task 5:
1. Assemble the BLOWER.ASM to the frame as shown. 2. Save the model and close the window.
Fo r
Module 28 | Page 24
PT
In
te
rn
al
2012 PTC
se
nl
5. Assemble and pattern a BOLT_5.PRT model as shown. 6. Save the model and close the window.
Fo r
2012 PTC
PT
In
te
rn
al
Module 28 | Page 25
se
nl
Fo r
Module 28 | Page 26
PT
7. Insert a shaded general view in the upper-right corner of the sheet. Use the default orientation and a custom view scale of 2.
In
te
rn
al
2012 PTC
se
nl
8. Insert a detailed view of the first few fins. 9. Adjust the hatching as shown. When creating the detail view, the prompts in the Message Log guide you through the process in steps.
Task 2:
Fo r
2012 PTC
PT
7. Unhide datum plane DTM1. 8. Insert an auxiliary view and select DTM1 in the far right projected view as the reference. 9. Rename the drawing view to A. 10. Add arrows, as shown.
In
1. Modify the drawing properties so that it references a second model, the CRANKSHAFT.PRT. 2. Insert a new sheet and type your name at the prompt. 3. Insert a general view in the lower center of the sheet. Orient the view to the LEFT model view. 4. Edit the display of the general view to Hidden. 5. Modify the drawing scale of this sheet to be 2.5. 6. Insert projected views on each side of the first view.
te
rn
al
Module 28 | Page 27
se
nl
11. Insert a view in the upper-right corner of the sheet as shown. 12. Orient the view to the 3D model view. 13. Set the view scale to 3.
Task 3:
Fo r
Module 28 | Page 28
PT
In
te
rn
al
2012 PTC
se
1. Show and position dimensions, as shown. 2. This drawing is utilized later in the project. Save the drawing and close the window.
nl
3. Perform a Global Interference check on the assembly. 4. Identify the areas of interference between the frame and impeller components.
Fo r
2012 PTC
PT
In
te
rn
al
Module 28 | Page 29
se
nl
Task 2:
1. Remove material from the frame, as shown. 2. Run the interference check again to verify that the frame no longer interferes with the impeller components.
Task 3:
Fo r
Module 28 | Page 30
PT
1. Enable Collision Detection. 2. Drag a blade on the impeller. As the components proceed through their motions, check for component collisions. 3. Investigate the collision between the connecting rod and engine block.
In
te
rn
al
2012 PTC
se
nl
Task 4:
1. Open the ENGINE.ASM and activate the ENGINE_BLOCK.PRT. 2. Create an extrude feature to remove a circular section of material, as shown.
Fo r
2012 PTC
PT
In
3. Create a round feature on both edges, as shown. 4. Save the model and close the window.
te
rn
al
Module 28 | Page 31
se
nl
5. Open the ENGINE-BLOWER_MODELS.DRW. 6. Edit the 8.5 dimension on sheet 2 to 8, as shown. Update and save the model, close the window, and return to the ENGINE_BLOWER.ASM.
7. Verify that the modifications you made have removed the interference. 8. Save the model and close the window. This completes the objective.
Fo r
Module 28 | Page 32
PT
In
te
rn
al
2012 PTC
se
nl
Copyright
Introduction to Creo Parametric 2.0
Copyright 2012 Parametric Technology Corporation and/or Its Subsidiary Companies. All Rights Reserved.
User and training guides and related documentation from Parametric Technology Corporation and its subsidiary companies (collectively "PTC") are subject to the copyright laws of the United States and other countries and are provided under a license agreement that restricts copying, disclosure, and use of such documentation. PTC hereby grants to the licensed software user the right to make copies in printed form of this documentation if provided on software media, but only for internal/personal use and in accordance with the license agreement under which the applicable software is licensed. Any copy made shall include the PTC copyright notice and any other proprietary notice provided by PTC. Training materials may not be copied without the express written consent of PTC. This documentation may not be disclosed, transferred, modified, or reduced to any form, including electronic media, or transmitted or made publicly available by any means without the prior written consent of PTC and no authorization is granted to make copies for such purposes. Information described herein is furnished for general information only, is subject to change without notice, and should not be construed as a warranty or commitment by PTC. PTC assumes no responsibility or liability for any errors or inaccuracies that may appear in this document. The software described in this document is provided under written license agreement, contains valuable trade secrets and proprietary information, and is protected by the copyright laws of the United States and other countries. It may not be copied or distributed in any form or medium, disclosed to third parties, or used in any manner not provided for in the software licenses agreement except with written prior approval from PTC.
PRINTING HISTORY Document No. T3902-390-02 Order Number DT-T3902-390-02 Printed in the U.S.A Date 05/14/2012
Fo r
PT
In
te
rn
al
Description
This document and the software described herein are Commercial Computer Documentation and Software, pursuant to FAR 12.212(a)-(b) (OCT95) or DFARS 227.7202-1(a) and 227.7202-3(a) (JUN95), and are provided to the US Government under a limited commercial license only. For procurements predating the above clauses, use, duplication, or disclosure by the Government is subject to the restrictions set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause at DFARS 252.227-7013 (OCT88) or Commercial Computer Software-Restricted Rights at FAR 52.227-19(c)(1)-(2) (JUN87), as applicable. 01012012
se
Important Copyright, Trademark, Patent, and Licensing Information: See the About Box, or copyright notice, of your PTC software.
UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVIL DAMAGES AND CRIMINAL PROSECUTION. PTC regards software piracy as the crime it is, and we view offenders accordingly. We do not tolerate the piracy of PTC software products, and we pursue (both civilly and criminally) those who do so using all legal means available, including public and private surveillance resources. As part of these efforts, PTC uses data monitoring and scouring technologies to obtain and transmit data on users of illegal copies of our software. This data collection is not performed on users of legally licensed software from PTC and its authorized distributors. If you are using an illegal copy of our software and do not consent to the collection and transmission of such data (including to the United States), cease using the illegal version, and contact PTC to obtain a legally licensed copy.
nl