You are on page 1of 3

CAMPISA S.r.l.

n. 7675 / 04 / 00 cat. OS 04 cl. IV

13, via Ruffini - 20030 Palazzolo Milanese (MI) Italia http://www.campisa.it Tel. +39 - 02 99 03 971 serie - Fax +39 - 02 99 04 43 51 e-mail: info@campisa.it

Azienda Certificata con OdC TV ITALIA UNI EN ISO 9001:2008 - N501001972

CAMPISA INFLATABLE DOCK SHELTER

CAMPISA inflatable dock shelter for dock level loading bays for energetic saving and better working conditions

CAMPISA inflatable dock shelter is the best solution for insulating and improving the working environment. It can be rapidly inflated with a fan and it creates a perfect insulation between the vehicle and the loading bay, sheltering from cold, rain, wind and also dust and humidity. The dock shelter is made by polyester fabric PVC covered, a material resisting to hot temperatures and bad weather conditions.

The pneumatic dock shelter is to be inflated only when the vehicle is in loading position. The fan can be switched off at the end of the operations and the cushion will rapidly retract to let the vehicle go.

CAMPISA, the certainty of a sure choice


Page. 1 of 3 - CAMPISA Srl, Technical Description Inflatable Dock Shelter 1205 Rev1 Doc.STIDSGO

CAMPISA S.r.l.
n. 7675 / 04 / 00 cat. OS 04 cl. IV

13, via Ruffini - 20030 Palazzolo Milanese (MI) Italia http://www.campisa.it Tel. +39 - 02 99 03 971 serie - Fax +39 - 02 99 04 43 51 e-mail: info@campisa.it

Azienda Certificata con OdC TV ITALIA UNI EN ISO 9001:2008 - N501001972

FROM 30 YEARS CAMPISA EXPERIENCE, THE MOST ADVANCED INFLATABLE DOCK SHELTER technical description

The inflatable dock shelter


It is suitable for insulating high temperature gap environments. This occurs when factory and vehicle temperatures are controlled in comparison with the outside. The inflatable dock shelter is placed between warehouse and vehicle docked at the loading bay, in order to avoid heating or air conditioning dispersion. Beside this, it doesnt allow dust and rain come in and it stops harmful draughts, unhealthy for operators.

Cover and seal materials


Horizontal and vertical cushions made by black polyester fabric covered with PVC, weather resistant and with permanent elasticity. Constant pressure guaranteed by small holes. The cushions are connected to the frame by Velcro, easy accessible for inspection. Double polyester weaving covered by PVC front sides, for an aesthetically hiding of the three cushions.

Dimensions
Width 3400, height 4750, depth 1000 mm for vehicles between 2100 and 2600 mm wide. Free dimensions inside the inflated parts: 2000 width, 3000 mm height from ground.

Functioning
The vehicle freely enters the retracted dock shelter. Ground guides for centring the vehicle are strongly suggested for granting functionality and dock shelter protection from collisions. Once docked the vehicle, the fan is switched on and the pneumatic shelter inflates in short the three cushions that perfectly adhere to the vehicle sides, sealing out the outer atmosphere, air streams and weather conditions. The fan is switched off at the end of the operations and the cushions retract to rest position by ropes and counter-weights as to clear the vehicle.

The construction
The dock shelter bearing frame is made of 40 mm thick insulated panels. Roof and vertical structures fixed to the wall with expansion screws (remark: the wall must hold bolts). Ribbed roof for side water draining. Inflatable side cushions on vertical panels.

CAMPISA, the certainty of a sure choice


Page. 2 of 3 - CAMPISA Srl, Technical Description Inflatable Dock Shelter 1205 Rev1 Doc.STIDSGO

CAMPISA S.r.l.
n. 7675 / 04 / 00 cat. OS 04 cl. IV

13, via Ruffini - 20030 Palazzolo Milanese (MI) Italia http://www.campisa.it Tel. +39 - 02 99 03 971 serie - Fax +39 - 02 99 04 43 51 e-mail: info@campisa.it

Azienda Certificata con OdC TV ITALIA UNI EN ISO 9001:2008 - N501001972

CAMPISA, the certainty of a sure choice


Page. 3 of 3 - CAMPISA Srl, Technical Description Inflatable Dock Shelter 1205 Rev1 Doc.STIDSGO

You might also like