Professional Documents
Culture Documents
VS050/1
3.
VS050/3
2.
4.
5.
6.
7.
8.
9.
1.
VS050/2
VS050/4
VS050/5
VS050/6
VS050/7
VS050/8
VS050/9
APPLICATIONS
A comprehensive nine piece specialised tools set suitable for most popular carburettor & fuel
injection systems used by the above car manufacturers, and are as follows:
Sealey Group
01284 757500
01284 703534
E-mail: sales@sealey.co.uk
080497
080497
0
N/A
pp
1.
2.
WARNING!
Refer to a reputable workshop manual for the specific vehicle fuel system being serviced,
for detailed and concise instructions on the correct use of these specialised tools.
All adjustments should be carried out strictly as specified.
Petrol is highly inflammable and highly toxic.
a).
Always work in a well ventilated area.
b).
Never smoke or use a naked flame.
For top fitting stromberg CD150, CD175, CDS, CDSE and CD-2SE carburettor. Reversible dual purpose tool suitable
for both pre 1977 and post 1978 Stromberg / Zenith-Solex models with plain hexagon and raised blade adjustment.
VS050/02 FLOAT NEEDLE VALVE SPANNER
For SU carburettor, type H, HD, HS, HIF
As fitted to Austin, Chrysler, MG, Morris, Rover, Triumph, and Volvo models.
VS050/03 BOTTOM FITTING CD and CDS
For bottom fitting Zenith Stromberg CD and CDS carburettor with a castellated or fluted adjustment
on the base - as fitted to various Vauxhall models.
VS050/04 MIXTURE ADJUSTMENT - BOSCH K
For Bosch K and KE, Jetronic fuel injection systems as fitted to Audi, BMW, Ford, Mercedes, Porsche, Renault, Saab,
Volkswagen and Volvo models. Long reach design to clear obstructions, the tool can be used independently or with
either 1/4square drive or 3/8 square drive accessories.
VS050/05 MIXTURE ADJUSTMENT - NIKKI
For tamper proof mixture adjustment screws on Hitachi and Nikki carburettor as fitted to certain Datsun, Nissan and
Subaru models. The tool can be used independently or with either 1/4 square drive or 3/8 square drive accessories.
VS050/06 AISAN AND TOYOTA VENTURI
For tamper proof mixture adjustment screws on Aisan and Mikuni carburettor as fitted to certain Mitsubishi and Toyota
models. The tool can be used independently or with either 1/4 square drive or 3/8 square drive accessories.
VS050/07 MIXTURE ADJUSTMENT - BOSCH L
For BOSCH L, LE, LE2, Jetronic fuel injection systems as fitted to Alfa, BMW, Citroen, Fiat, Jaguar, Lancia, Peugoet,
Renault, Seat, Vauxhall - Opel, and Volvo models.
VS050/08 MIXTURE ADJUSTMENT - FORD CVH
For recessed tamper proof mixture adjustment screws on CVH engine Ford models, Fiesta 1989 onwards, Escort
and Orion 1991 onwards.
VS050/09 WEBER 0.8mm x 4mm
For recessed mixture adjustment screws on Ford and Weber carburettor as fitted to Ford Escort, Fiesta, Orion
and Opel Ascona models etc. Also suitable for many other applications on a wide variety of carburettor fixings,
throttle and mixture adjustment screws.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No responsibility is accepted for incorrect use of this equipment
WARRANTY: Guarantee is 12 months from purchase date. Proof of purchase will be required for any claim.
INFORMATION: Please call us for a copy of our latest catalogue.
Sealey Group
01284 757500
01284 703534
E-mail: sales@sealey.co.uk
240497
240497
0
N/A