You are on page 1of 2

Wind Pressure

Basic Wind Speed (m\Hr) Basic Wind Speed (Km\Hr) Basic Wind Speed (m\Sec) Wind Pressure (lb/ft ) Wind Pressure (Kg\m ) Wind Pressure (N\m ) Wind Pressure (KN\m )
2 2 2 2

70.00 112.70 31.31 12.54 61.25 600.76 0.60

80.00 128.80 35.78 16.38 80.00 784.67 0.78

90.00 144.90 40.25 20.74 101.25 993.10 0.99

100.00 161.00 44.72 25.60 125.00 1226.05 1.23

110.00 177.10 49.19 30.98 151.26 1483.52 1.48

120.00 193.20 53.67 36.86 180.01 1765.51 1.77

130.00 209.30 58.14 43.26 211.26 2072.02 2.07

Wind Loads According to ASCE 7-05 Project:

Issue: Date: Designed by: Checked by:

Wind Load Calculation 3/13/2014 Tamer El-Najjar

Page 1 of 1 ASCE 7-05

Design Procedure (Analytical Procedure)


The basic wind speed V and wind directionality factor K d 1. shall be determined in accordance with Section 6.5.4. Basic wind speed (V) Directionality Factor (K d) 2. An importance factor I shall be determined in accordance with Section 6.5.5. Importance factor (I) 3. An exposure category or exposure categories and velocity pressure exposure coefficient K z or K h , as applicable, shall be determined for each wind direction in accordance with Section 6.5.6. Exposure category Velocity pressure exposure coefficient @ hight z (K z ) Velocity pressure exposure coefficient @ hight h (K h ) 4. A topographic factor K zt shall be determined in accordance with Section 6.5.7. Topographic factor K zt 5. A gust effect factor G or Gf, as applicable, shall be determined in accordance with Section 6.5.8.

Values

Figure , Table

166.00 km/h

46.11 m/s

0.85

SBC 301 Fig.6.4-1 ASCE Table 6-4

1.00

ASCE Table 6-1

C n/a 0.85

ASCE Sec. 6.5.6.3 ASCE Table 6-3 ASCE Table 6-3

1.00 0.85

ASCE Fig. 6-4 ASCE Sec. 6.5.8

6. An enclosure classification shall be determined in accordance with Section 6.5.9.

open

ASCE Sec. 6.5.9 & Sec. 6.2

7. Internal pressure coefficient GC pi shall be determined in accordance with Section 6.5.11.1 8. External pressure coefficients C p or GC p f , or force coefficients Cf , as applicable, shall be determined in accordance with Section 6.5.11.2 or 6.5.11.3, respectively Net pressure coefficient C NW Net pressure coefficient C NL 9. Velocity pressure q z or q h , as applicable, shall be determined in accordance with Section 6.5.10. q h =0.613 K z K zt K d V 2 I (N/m 2 )

n/a

-1.10 -0.60

ASCE Fig. 6-18A ASCE Fig. 6-18A

941.69 N/m2

ASCE Equation 6-15

10. Design wind load p or F shall be determined in accordance with Sections 6.5.12, 6.5.13, 6.5.14, and 6.5.15, as applicable. p = q h G C NW p = q h G C NL

-880.48 N/m2 -480.26 N/m2

ASCE Equation 6-25 ASCE Equation 6-25

You might also like