Professional Documents
Culture Documents
SOLUTIONS
Amorphous Silicon Solar Modules
Product Features
High performance and energy yield photovoltaic modules made of amorphous silicon Integrated bypass diode in the junction box reduces the power loss effect in a string caused by events such as shading PVB film with high quality TCO glass Module is glass to glass laminated Water-protected connector system Easy for installation
Applications
On-grid PV Systems Off-grid PV Systems Residential Roof Top Systems Commercial Roof Top Systems Ground Installations
(Please read the SUNGEN installation guide book for the step-by-step installation guidelines.)
OHSAS 18001
Solar Panel Build and Transfer EPC Build and Lease Build and Sell Build and Invest www.SUNGEN.com
1400mm
800mm
1100mm
FRONT VIEW
BACK VIEW
SIDE VIEW
Specifications
Model
Maximum power (Pmax) Open- circuit voltage (Voc) Short- circuit current (Isc) Voltage at maximum power (Vpmax) Current at maximum power (Ipmax) Temperature coefficient-open circuit voltage () Temperature coefficient-short circuit current () Temperature coefficient-power () Cell Dimensions Weight Frame Front glass Back glass Junction box type Maximum system voltage Maximum mechanical load Series fuse rating Fire rating Nominal Operating Cell Temperature (NOCT) Operating temperature (cell) Storage temperature Storage air humidity
SG-HN95-GG
95W 92.0V 1.67A 70.0V 1.35A
SG-HN100-GG
100W 92.0V 1.74A 70.5V 1.42A
1400mm
SG-HN105-GG
105W 92.5V 1.81A 71.0V 1.48A
-0.36%/K 0.13%/K -0.268%/K a-Si single junction 1400mm 1100mm 7.1mm (55.1 inches 43.3 inches 0.3 inches) 26.0Kg (57.3 lbs) None 3.2mm thickness 3.2mm thickness Multi-Contact Type 4 compliant 1000VDC (TV-EN/IEC61646) / 600VDC(UL) Snow load: 5400Pa(IEC Standard) ; Wind load: 2400Pa(IEC Standard) 3A Class C 40.28C (104.50F) -40C to +85C (-40F to +185F) -40C to +85C (-40F to +185F) <85% relative humidity
The electrical data applied under standard test conditions (STC): irradiance of 1000 W/m2 with an AM1.5 spectrum at a cell temperature of 25C. The power output is subject to a manufacturing tolerance of 3%; Electrical parameter tolerance 10%.
Characteristic Curves(SG-HN100-GG)
Typical Characteristics at Different Irradiances Performance of Voc and Isc at Low Irradiance Module Performance, Stabilized (red curve), Initial (dark curve)
Normalized Isc, Voc, Pm against Module Temperature
Add: Units 10-15,9/F, Metro Loft, 38 Kwai Hei Street, Kwai Chung, N.T., Hong Kong Tel: +852.3583.5286 Fax: +852.3106.2801 Email: GreenEnergy@SUNGEN.com
WWW.SUNGEN.COM
SGTF.0313.A004W