Professional Documents
Culture Documents
RANGE OF EMPLOYMENT
UNIDIRECTIONAL ROOF SLAB UP TO 5 5,00m 00 SPAN
<co
CENTER CENTER
1459
1203
1023
For the use of such values the manufacturing company will provide to increase the resistant section to the negative moments, verifying the following relationship .
SCHEME OF CALCULATION
N.B. The calculations have been made considering the moment in the center element equal to the extremity with value QL2/12, considering L equal to the distance between the axis of the bearing structures (for safety conditions considering the permanent points on the external sides) in the calculation of the moment and L-15 in the shear calculation.
RANGE OF EMPLOYMENT
UNIDIRECTIONAL ROOF SLAB UP TO 6 6,00m 00 SPAN
Weight
(Kg/m)
Qmax
<co
CENTER CENTER
2188
1804
1535
1336
1182
1060
5.5 6 699 481 825 587 974 818 1123 943 1295 1088 1466 1232
961 879
For the use of such values the manufacturing company will provide to increase the resistant section to the negative moments, verifying the following relationship .
SCHEME OF CALCULATION
N.B. The calculations have been made considering the moment in the center element equal to the extremity with value QL2/12, considering L equal to the distance between the axis of the bearing structures (for safety conditions considering the permanent points on the external sides) in the calculation of the moment and L-15 in the shear calculation.
RANGE OF EMPLOYMENT
UNIDIRECTIONAL ROOF SLAB UP TO 7 7,00m 00 SPAN
Center
Center
<co
For the use of such values the manufacturing company will provide to increase the resistant section to the negative moments, verifying the following relationship .
SCHEME OF CALCULATION
N.B. The calculations have been made considering the moment in the center element equal to the extremity with value QL2/12, considering L equal to the distance between the axis of the bearing structures (for safety conditions considering the permanent points on the external sides) in the calculation of the moment and L-15 in the shear calculation.
Roof Panels Reinforcing FLOORS AND ROOF BUILT WITH CONCREWALL PANELS OFFERS NOTABLE ADVANTAGES AS: Simplicity in the site assembling, with geometries predisposed in factory as from the structural project Site lifting devices simplified, due to the lightness of the elements Dead load reduced with notable reduction of the seismic masses Absolute certainty of the thermal isolation continuity