Professional Documents
Culture Documents
FEATURES
Extreme high temperature operation 40C to +210C, FLATPACK package 40C to +175C, SOIC package Rail-to-rail output Low power: 1.3 mA maximum Gain bandwidth product: 9.7 MHz typical at AV = 100 Low offset voltage: 250 V maximum Unity-gain stable High slew rate: 5.0 V/s typical at 210C Low noise: 4.2 nV/Hz typical at 1 kHz and 210C
V+ OUT B IN B +IN B
11524-001
AD8634
TOP VIEW (Not to Scale)
APPLICATIONS
Downhole drilling and instrumentation Avionics Heavy industrial High temperature environments
GENERAL DESCRIPTION
The AD8634 is a precision, 9.7 MHz bandwidth, dual amplifier that features rail-to-rail outputs. The AD8634 is guaranteed to operate from 3 V to 30 V (or from 1.5 V to 15 V) and at very high temperatures. The AD8634 is well suited for applications that require both ac and dc precision performance. The combination of wide bandwidth, low noise, and precision makes the AD8634 useful in a wide variety of applications, including filters and interfacing with a variety of sensors. This dual-channel op amp is offered in an 8-lead SOIC package with an operating temperature range of 40C to +175C. It is also available in an 8-lead ceramic flat package (FLATPACK) with an operating temperature range of 40C to +210C. Both packages are designed for robustness at extreme temperatures and are qualified for up to 1000 hours of operation at the maximum temperature rating. The AD8634 is a member of a growing series of high temperature qualified products offered by Analog Devices, Inc. For a complete selection table of available high temperature products, see the high temperature product list and qualification data available at www.analog.com/hightemp.
Rev. 0
Document Feedback One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 2013 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
Data Sheet
Absolute Maximum Ratings ............................................................5 Predicted Lifetime vs. Operating Temperature .........................5 Thermal Resistance .......................................................................5 ESD Caution...................................................................................5 Typical Performance Characteristics ..............................................6 Applications Information .............................................................. 10 Input Protection ......................................................................... 10 Outline Dimensions ....................................................................... 11 Ordering Guide .......................................................................... 11
REVISION HISTORY
7/13Revision 0: Initial Version
Rev. 0 | Page 2 of 12
AD8634
Parameter INPUT CHARACTERISTICS Offset Voltage Offset Voltage Drift Offset Voltage Matching Input Bias Current Input Offset Current Input Voltage Range Common-Mode Rejection Ratio Large Signal Voltage Gain Input Impedance Differential Common-Mode OUTPUT CHARACTERISTICS Output Voltage High
Unit V V/C V nA nA V dB dB
120 112
115 108
53||1.1 1.1||2.5 VOH RL = 10 k to VCM RL = 2 k to VCM RL = 2 k to VCM, TA = TMAX RL = 10 k to VCM RL = 2 k to VCM RL = 2 k to VCM, TA = TMAX VOUT = 0 V, TA = TMAX VSY = 2 V to 18 V IOUT = 0 mA, TA = TMAX 14.8 14.0 14.60 14.90 14.5 14.75 14.95 14.8 +100/20 105 115 1.0 1.2 103 14.8 14.0 14.60 14.8 14.70 14.70
53||1.1 1.1||2.5 14.90 14.5 14.75 14.95 14.75 +105/18 113 1.1 1.3
k||pF G||pF V V V V V V mA dB mA
VOL
Short-Circuit Current POWER SUPPLY Power Supply Rejection Ratio Supply Current per Amplifier DYNAMIC PERFORMANCE Slew Rate Gain Bandwidth Product Unity-Gain Crossover 3 dB Closed-Loop Bandwidth Phase Margin NOISE PERFORMANCE Voltage Noise Voltage Noise Density Current Noise Density
3.6
3.6
0.1 Hz to 10 Hz f = 1 kHz
Rev. 0 | Page 3 of 12
AD8634
ELECTRICAL CHARACTERISTICS, VSY = 3.0 V
VSY = 3.0 V, VCM = 1.5 V, VOUT = 1.5 V, TMIN TA TMAX, unless otherwise noted. Table 2.
Test Conditions/ Comments SOIC Package 40C TA +175C Min Typ Max 250 0.35 TA = TMAX IB IOS VIN CMRR AVO 200 0.3 60 104 45 150 +200 30 2.7 200 0.5 55 100 0.35 40
Data Sheet
Parameter INPUT CHARACTERISTICS Offset Voltage Offset Voltage Drift Offset Voltage Matching Input Bias Current Input Offset Current Input Voltage Range Common-Mode Rejection Ratio Large Signal Voltage Gain Input Impedance Differential Common-Mode OUTPUT CHARACTERISTICS Output Voltage High
FLATPACK Package 40C TA +210C Min Typ Max 250 150 +200 30 2.5
Unit V V/C V nA nA V dB dB
65 112
60 108
53||1.1 2.8||2.5 VOH RL = 10 k to VCM RL = 2 k to VCM RL = 2 k to VCM, TA = TMAX RL = 10 k to VCM RL = 2 k to VCM RL = 2 k to VCM, TA = TMAX VOUT = 0 V, TA = TMAX VSY = 1.25 V to 1.75 V IOUT = 0 mA, TA = TMAX 2.8 2.0 2.60 2.90 2.5 2.75 50 200 +65/13 97 102 0.9 1.1 95 2.8 2.0 2.60 200 300 300
53||1.1 2.8||2.5 2.90 2.5 2.75 50 250 +70/11 100 1.0 1.2
k||pF G||pF V V V mV mV mV mA dB mA
VOL
Short-Circuit Current POWER SUPPLY Power Supply Rejection Ratio Supply Current per Amplifier DYNAMIC PERFORMANCE Slew Rate Gain Bandwidth Product Unity-Gain Crossover 3 dB Closed-Loop Bandwidth Phase Margin NOISE PERFORMANCE Voltage Noise Voltage Noise Density Current Noise Density
3.5
3.5
0.1 Hz to 10 Hz f = 1 kHz
Rev. 0 | Page 4 of 12
AD8634
100k
Rating 18 V V VIN V+ 0.6 V Indefinite 65C to +150C 40C to +175C 40C to +210C 200C 245C 300C
10k
1k
100
10
130
140
150
160
170
180
190
200
210
For differential input voltages greater than 0.6 V, limit the input current to less than 5 mA to prevent degradation or destruction of the input devices (see the Input Protection section).
THERMAL RESISTANCE
JA is specified for the device soldered on a 4-layer JEDEC standard printed circuit board (PCB) with zero airflow. Table 4. Thermal Resistance
Package Type 8-Lead SOIC_N 8-Lead FLATPACK JA 121 100 JC 43 15 Unit C/W C/W
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ESD CAUTION
Rev. 0 | Page 5 of 12
11524-126
1 120
Data Sheet
60
50
NUMBER OF AMPLIFIERS
NUMBER OF AMPLIFIERS
100 80 60 40 20 0 VOS (V) 20 40 60 80 100
11524-120
60 50 40 30 20 10 0
40
30
20
10
100 95 90 85 80 75 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0
IB (nA)
Figure 6. Input Bias Current Distribution, SOIC Package, VSY = 15.0 V, TA = 175C
10 9
20
NUMBER OF AMPLIFIERS
8
NUMBER OF AMPLIFIERS
7 6 5 4 3 2 1
15
10
2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6
TCVOS (V/C)
IOS (nA)
Figure 7. Input Offset Current Distribution, SOIC Package, VSY = 15.0 V, TA = 175C
0
40 20
OFFSET VOLTAGE (V)
10 20
0 20 40 60 80
30 40 50 60 70 80 90
IB+ IB
11524-104
50
200
250
50
200
250
Rev. 0 | Page 6 of 12
11524-107
100 100
100 100
11524-106
0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60
11524-121
11524-105
Data Sheet
400 300 200 100 0 100 200 300 400 16 14 12 10 8 6 4 2
AD8634
0 20
40 60 80 100 120
10 12 14 16
11524-108
140 16 14 12 10 8 6 4 2
Figure 9. Offset Voltage vs. Common-Mode Voltage and Temperature, VSY = 15.0 V
100
Figure 12. Input Bias Current vs. Common-Mode Voltage and Temperature, VSY = 15.0 V
100
10
10
100m
10m
10
100
10
100
1000
ILOAD (mA)
ILOAD (mA)
Figure 10. Negative Dropout Voltage vs. Load Current and Temperature
Figure 13. Positive Dropout Voltage vs. Load Current and Temperature
120
120
VSY = 15V TA = 210C
100 80
80
CMRR (dB)
PSRR (dB)
60 40 20
60
40
20
0 20 100
+PSRR PSRR 1k 10k 100k FREQUENCY (Hz) 1M 10M 100M
11524-018
1k
1M
10M
11524-110
0 100
Rev. 0 | Page 7 of 12
11524-112
11524-109
1m 0.1
10m
AD8634
80
Data Sheet
VSY = 15V RL = 10k 180
2500
60
135
2000
40
90
GAIN (dB)
1500
20
45
1000
20
500
10
15
20
25
30
35
FREQUENCY (Hz)
OUTPUT INPUT
OUTPUT INPUT
11524-117
11524-022
40 1k
90 100M
CH1 500mV
CH2 500mV
A CH1
0V
11524-021
CH1 500mV
CH2 500mV
A CH1
0V
Figure 16. Large Signal Positive Edge Response, VSY = 15.0 V, TA = 175C
: 1.69V @: 750mV : 320ns @: 140ns CH1 AMPL 2.92V
Figure 19. Large Signal Positive Edge Response, VSY = 15.0 V, TA = 210C
: 1.67V @: 830mV : 280ns @: 140ns CH1 AMPL 2.91V
OUTPUT INPUT
OUTPUT INPUT
CH1 500mV
CH2 500mV
A CH1
0V
11524-023
CH1 500mV
CH2 500mV
A CH1
0V
Figure 17. Large Signal Negative Edge Response, VSY = 15.0 V, TA = 175C
Figure 20. Large Signal Negative Edge Response, VSY = 15.0 V, TA = 210C
Rev. 0 | Page 8 of 12
11524-020
Data Sheet
1000
AD8634
VSY = 15V
100
+25C +210C
10
1k
10k
11524-125
1 10
Rev. 0 | Page 9 of 12
Data Sheet
Figure 22 illustrates a typical noninverting configuration for an overvoltage-protected amplifier where the series resistance, RS, is chosen such that RS = (VIN (MAX) VSUPPLY)/5 mA
R2
INPUT PROTECTION
As with any semiconductor device, if the input voltages applied to the AD8634 exceed either supply voltage, the input overvoltage I-to-V characteristic of the device must be considered. When an overvoltage condition occurs, the amplifier can be damaged, depending on the magnitude of the applied voltage and the magnitude of the fault current. The protection diodes between the input and supply pins conduct when the input common-mode voltage exceeds either supply pin by a diode drop. This diode drop varies with temperature and is in the range of 0.3 V to 0.8 V. The AD8634 has no internal currentlimiting resistors; therefore, fault currents can quickly rise to damaging levels. This input current is not inherently damaging to the device, provided that it is limited to 5 mA or less. If a fault condition causes more than 5 mA to flow, an external series resistor should be added at the expense of additional thermal noise.
AD8634
VIN RS
1/2
VOUT
11524-075
Figure 22. Resistance in Series with Inputs Limits Overvoltage Currents to Safe Values
For example, a 1 k resistor protects the AD8634 against input signals up to 5 V above and below the supplies. Note that the thermal noise of a 1 k resistor at room temperature is 4 nV/Hz, which is close to the voltage noise of the AD8634. For configurations where both inputs are used, add a series resistor at each input to protect the inputs against damage. To ensure optimum dc and ac performance, it is recommended that source impedance levels be balanced.
VCC
VCC +5V
U1
+5V
ADR225
VS OUTPUT + C1 10F C2 0.1F GND + C3 1F C4 0.1F R2 2.5k R3 2.5k 5V VEE RTD
U2A
VCC +5V
U3
AD8634
AD8229
SIGNAL OUT
5V VEE
Rev. 0 | Page 10 of 12
11524-076
R1 2.5k
AD8634
5 4
1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0040) COPLANARITY 0.10 SEATING PLANE
0.50 (0.0196) 0.25 (0.0099) 8 0 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157)
45
COMPLIANT TO JEDEC STANDARDS MS-012-AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 24. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches)
012407-A
0.012 R TYP
TOP VIEW
END VIEW
SIDE VIEW
0.175
Figure 25. 8-Lead Ceramic Flat Package [FLATPACK] (F-8-2) Dimensions shown in inches
ORDERING GUIDE
Model1, 2 AD8634HRZN AD8634HFZ
1 2
Package Description 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Ceramic Flat Package [FLATPACK]
Rev. 0 | Page 11 of 12
AD8634 NOTES
Data Sheet
2013 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D11524-0-7/13(0)
Rev. 0 | Page 12 of 12