Professional Documents
Culture Documents
SERIES
40.31
40.61
3.5 or 5.3*
* (3.5 or 5.3) mm see ordering code Contact specification Contact configuration Rated current/Maximum peak current Rated load AC1 Rated load AC15 (230 V AC) Single phase motor rating (230 V AC) Breaking capacity DC1: 30/110/220 V Minimum switching load Standard contact material Coil specification Nominal voltage (UN) V AC (50/60 Hz) V DC Rated power DC/sensitive DC Operating range Holding voltage Must drop-out voltage Technical data Mechanical life AC/DC Electrical life at rated load AC1 Operate/release time
IV-2013, www.findernet.com
1 CO (SPDT) A VA VA kW A 12/20 250/400 3,000 1,000 0.55 12/0.3/0.12 300 (5/5) AgNi 12 - 24 0.65/0.5 0.4 UN 0.1 UN 10 106 200 103 7/3 (10/3 sensitive) 6 (8 mm) 1,000 40+85 RT II
1 CO (SPDT) 16/30 250/400 4,000 1,000 0.55 16/0.3/0.12 500 (10/5) AgCdO 12 - 24 0.65/0.5 0.4 UN 0.1 UN 10 106 100 103 7/3 (10/3 sensitive) 6 (8 mm) 1,000 40+85 RT II
mW (V/mA)
W AC DC DC cycles cycles ms
Insulation between coil and contacts (1.2/50 s) kV Dielectric strength between open contacts V AC Ambient temperature range Environmental protection Approvals (according to type) C
40
SERIES
4 0 . 3
Series Type 3 = PCB - 3.5 mm pinning 6 = PCB - 5 mm pinning No. of poles 1 = 1 pole for: 40.31, 12 A 40.61, 16 A Coil version 7 = Sensitive DC 9 = Standard DC Coil voltage 012 = 12 V DC 024 = 24 V DC
1 . 7 . 0 2 4 . 1
0
D: Special versions 0 = Standard flux proof (RT II) 1 = Wash tight (RT III) C: Options 0 = Pins length 5.3 mm (Plug-in relays) 2 = Pins length 3.5 mm (PCB relays)
A: Contact material 0 = AgNi (40.31 Plug-in relays) 0 = AgCdO (40.61 Plug-in relays) 1 = AgNi (PCB relays) 2 = AgCdO (40.61 PCB relays) B: Contact circuit 0 = CO (SPDT) 3 = NO (SPST)
Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold. Terminal pin PCB-relay, pin length 3.5 mm PCB-relay, pin length 3.5 mm Plug in relay, pin length 5.3 mm Plug in relay, pin length 5.3 mm Type 40.31 40.61 40.31 40.61 Coil version A B 0-3 0-3 0-3 0-3 C 2 2 0 0 D 0-1 0-1 0-1 0-1 DC/DC sensitive 1 DC/DC sensitive 1 - 2 DC/DC sensitive 0 DC/DC sensitive 0
Technical data
Insulation according to EN 61810-1 Nominal voltage of supply system Rated insulation voltage Pollution degree Insulation between coil and contact set Type of insulation Overvoltage category Rated impulse voltage Dielectric strength Insulation between open contacts Type of disconnection Dielectric strength Conducted disturbance immunity Burst (5...50)ns, 5 kHz, on A1 - A2 Surge (1.2/50 s) on A1 - A2 (differential mode) Other data Bounce time: NO/NC Vibration resistance (10200)Hz: NO/NC Shock resistance NO/NC Power lost to the environment without contact current with rated current Recommended distance between relays mounted on PCB ms g g W W mm 2/5 20/5 20/5 0.5 1.2 (40.31) 5
IV-2013, www.findernet.com
V AC V AC
kV (1.2/50 s) V AC
6 4,000 Micro-disconnection
V AC/kV (1.2/50 s)
1.8 (40.61)
40
SERIES
Cycles
DC voltage (V)
* Inductive load - cos = 0.4: inrush current = rated current ** Inductive load - AC15: inrush current = 10 x rated current
When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of 100103 can be expected. In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased.
Coil specifications
DC coil data - 0.5 W sensitive (type 40.31) Nominal voltage UN V 12 24 Coil code Operating range Umin V 8.8 17.5 Umax V 18 36 Resistance Rated coil consumption R I at UN mA 288 42 1,150 21 DC coil data - 0.5 W sensitive (type 40.61) Nominal voltage UN V 12 24 Coil code Operating range Umin V 9.6 19.2 Umax V 18 36 Resistance Rated coil consumption R I at UN mA 288 42 1,150 21
7.012 7.024
7.012 7.024
DC coil data - 0.65 W standard (types 40.31/61) Nominal voltage UN V 12 24 Coil code Operating range Umin V 8.8 17.5 Umax V 18 36 Resistance Rated coil consumption R I at UN mA 220 55 900 27
9.012 9.024
40.61 40.31
IV-2013, www.findernet.com
1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature.
1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature.