Professional Documents
Culture Documents
SOLUTIONS
SGM-P Series 270W/280W/285W
Polycrystalline Solar Modules
Product Features
High cell efciency with quality silicon material for long term output stability and reliability Rigorous quality control to meet highest international standards High transmittance low iron tempered glass with enhanced stiffness and impact resistance Unique frame design with high mechanical strength for easy installation Advanced encapsulation material with multilayer sheet lamination to provide efficient protection from the severest environmental conditions Outstanding electrical performance under high temperature and low irradiance conditions
Brief Information
156mm x 156mm (6.14inches x 6.14inches) polycrystalline solar cells 72 cells in series (12x6) 1000VDC (EN/IEC) / 600VDC(UL) maximum system voltage
Applications
On-grid PV Systems Off-grid PV Systems Residential Roof Top Systems Commercial Roof Top Systems Ground Installations
(Please read the SUNGEN installation guide book for the step-by-step installation guidelines.)
OHSAS 18001
Solar Panel Build and Transfer EPC Build and Lease Build and Sell Build and Invest www.SUNGEN.com
(Front View)
11 [0.43]
(Back View)
496[19.53] 942[37.09]
40 [1.57] 35 [1.38]
992[39.06]
Note: mm [inch]
Specifications
Model
Maximum power (Pmax) Open-circuit Voltage (Voc) Short-circuit Current (Isc) Voltage at maximum power (Vpmax) Current at maximum power (Ipmax) Module Efficiency () No.of Cells Weight Dimension Temperature Coefficient of Pm Temperature Coefficient of Voc Temperature Coefficient of Isc Tolerance Cell NOCT Operating Temperature Bypass diodes Maximum mechanical load Maximum series fuse rating Maximum System Voltage
1957[77.05]
SGM-270P
270W 43.2V 8.31A 36.0V 7.50A 13.9%
SGM-280P
280W 43.2V 8.41A 36.0V 7.78A 14.4% 72(12 x 6) 22.5 kg (49.6 Ibs) 1957mm x 992mm x 40mm (77.05inches x 39.06inches x 1.57inches) -0.45%/K -0.35%/K 0.05%/K 0 to +3% 156mm x 156mm (6.14inches x 6.14inches) 48C+/-2C (118.4F +/-3.6F) -40C to +85C (-40F to +185F) 6 diodes
SGM-285P
285W 43.8V 8.50A 36.0V 7.92A 14.7%
Snow load: 5400Pa (IEC Standard); Wind load 2400Pa (IEC Standard) 15A 1000VDC (TV-EN/IEC61215) / 600VDC(UL)
The electrical data applied under standard test conditions (STC): irradiance of 1000 W/m2 with an AM1.5 spectrum at a cell temperature of 25C. Electrical parameter tolerance 10%.
Characteristic Curves(SGM-280P)
Typical Characteristics at Dierent Irradiances
10.0
1000 W/m 2
350
50
8.0
300
40 30 20 10 0
Current (A)
Power (W)
250
7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 200 400 600 800
2
Isc Voc Pm
1000
0.0 1200
50
75
100
Voltage (V)
Irradiance (W/m )
Module Temperature( C)
SUNGEN offers a range of small, medium and large polycrystalline solar modules optimized for your needs. For more information, please contact SUNGEN team or visit www.SUNGEN.com. Design and specifications are subject to change without notice.
Add: Units 10-15,9/F, Metro Loft, 38 Kwai Hei Street, Kwai Chung, N.T., Hong Kong Tel: +852.3583.5286 Fax: +852.3106.2801 Email: GreenEnergy@SUNGEN.com
WWW.SUNGEN.COM
SGP.0313.A002(B3)R