Professional Documents
Culture Documents
Getting started
Installation guide - 070-0-GB - Jan-06 - This document is not contractual. The information mentioned in this document is given as an indication and can be modified without notice.
Installation guide
www.pulsonic.net
Pulsonic 2, rue de la Ferme 91400 Orsay France Phone: +33 (0) 1 64 46 34 10 Fax: +33 (0) 1 64 46 25 22 support@pulsonic.net
Pulsiane 3
www.pulsonic.net Edition: Dec-05
www.pulsonic.net
Edition: Dec-05
Pulsiane 3
Getting started
Pulsiane 3
Getting started
Installation rules
N
To windward Dominant winds To leeward
S Pulsonic
Wind vane Anemometer Pyranometer
(To windward)
ThermoHygrometer
(To leeward)
Moisture probe
(To windward)
Pulsiane 3 overview
www.pulsonic.net
Edition: Dec-05
www.pulsonic.net
Edition: Dec-05
Pulsiane 3
Getting started
Pulsiane 3
Getting started
Necessary tools
Wrenches n8 Wrenches n10 Wrenches n17 Male spanner n2 Male spanner n4 Screwdriver 0.6*3.5 Spirit level Compass Ground stake
to fix the rain gauge. to fix the arm and solar panel. to fix the station structure on the ground. provided with the station. provided with the station. to fix the wind vane on the sensors to ensure the flatness of the rain gauge. to adjust the wind vane. needed when the station includes sensors in the ground and/or a telephone link.
www.pulsonic.net
Edition: Dec-05
www.pulsonic.net
Edition: Dec-05
Pulsiane 3
Getting started
Pulsiane 3
Getting started
Connection of the ground rod to the box (Minimum section: 6 mm) Connection of the ground rod to the lightning arrester module of the phone line (Minimum section: 2.5 mm)
The lightning arrester module of the phone line and the station box must be separately connected to the ground rod. Advertising, the ground rod is not provided with the station.
www.pulsonic.net
Edition: Dec-05
www.pulsonic.net
Edition: Dec-05
Pulsiane 3
Getting started
Pulsiane 3
Getting started
Phone line
www.pulsonic.net
Edition: Dec-05
www.pulsonic.net
Edition: Dec-05
Pulsiane 3
Getting started
Pulsiane 3
Getting started
Assembly of sensors Anemometer - Vane - Pyranometer 1 Passage of the cable and fastening of the sensor on the arm
www.pulsonic.net
Edition: Dec-05
www.pulsonic.net
Edition: Dec-05
Pulsiane 3
Getting started
Pulsiane 3
Getting started
www.pulsonic.net
Edition: Dec-05
www.pulsonic.net
Edition: Dec-05
Pulsiane 3
Getting started
Pulsiane 3
Getting started
Fixing arms
2 Connection
Connection schema
Solar panel
www.pulsonic.net
Edition: Dec-05
www.pulsonic.net
Edition: Dec-05