Professional Documents
Culture Documents
01 - Introduction - Specifications
CONTENTS
1A10 - Using the manual 1B10 - SPECIFICATIONS - General specifications 1B11 - SPECIFICATIONS - Ground speeds 1B12 - SPECIFICATIONS - Dimensions 1B13 - SPECIFICATIONS - Capacities 1C10 - Miscellaneous
Contents - i
Introduction - Specifications
Contents - ii
CONTENTS
A . General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 B . Structure of the manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 C . Service tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 D . Repairs and replacements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1A10.1
1A10.2
A . General
The purpose of this manual is to assist Dealers and Agents in the efficient installation, maintenance and repair of AGCO equipment. Carrying out the procedures as detailed, together with the use of special tools where appropriate, will enable the operations to be completed within the time stated in the Repair Time Schedule.
Contents
For quick reference, each chapter starts with a table of contents, listing the various sections included in that chapter.
Meaning of references
(..) : identification of parts and components
Amendments
Amended pages will be issued carrying the same page number as the former pages: only the version number will change. Former pages should be destroyed.
C . Service tools
Where the use of a service tool is necessary to carry out an operation, the tool reference is mentioned following the relevant instruction. Drawings for locally made tools are given at the end of the relevant sections.
1A10.3
1A10.4
CONTENTS
A . Model 6445 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 B . Model 6455 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 C . Model 6460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 D . Model 6465 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 E . Model 6470 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 F . Model 6475 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 G . Model 6480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 H . Model 6485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 I . Model 6490 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 J . Model 6495 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 K . Model 6497 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 L . Model 6499 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1B10.1
1B10.2
A . Model 6445
Model
Front axle AG 85 fixed or suspended (optional) Clockwise 4 optional optional 2.5 T Hydraulics Open Centre 57 l/min TFLS 100 l/min Closed Centre 110 l/min Closed Centre 150 l/min GBA20 (4x4) Power Shuttle Dynashift optional optional optional Rear axle Orbitrol steering Brake master cylinder Braking assistance Trailer brake Auxiliary spool valves (maximum number) Couplers GPA20 HD 76 mm standard 1 3 Dog clutch Linkage Transmission control Instrument panel Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor telescopic optional Cat. 2, hook or ball type (*) Fast-setting or pin-adjusting scale Fast-setting or pin-adjusting scale Stud or auto-hitch (*) standard optional Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof High-visibility roof Sloping bonnet Platform Reference (*): according to country optional (*) optional (*) 4 hydraulic optional optional optional Fieldstar Cab optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional optional Electronics AUTOTRONIC 3 DCC2 EHRC 2 4 T (standard) or 6 T (optional) optional optional optional optional optional optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 Creeper unit 14/1 90 (67) PERKINS 1104C-44T 4 / 4.4 Turbo Lucas DP 210 Viscostatic 80 A
Type Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional)
Axle model Final drives Axle shaft Straight shaft Flanged shaft Brake discs per trumpet housing Hand brake discs Differential lock
Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Semi-mounted trailer hitch Swinging drawbar Roller type swinging drawbar Power take-off Type 540/1000/eco 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off
1B10.3
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.4
Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional -
optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.5
B . Model 6455
Model
Front axle AG 85 fixed or suspended (optional) Clockwise 5 optional optional 2.5 T Hydraulics Open Centre 57 l/min TFLS 100 l/min Closed Centre 110 l/min Closed Centre 150 l/min GBA20 (4x4) Power Shuttle Dynashift optional optional optional Rear axle Orbitrol steering Brake master cylinder Braking assistance Trailer brake Auxiliary spool valves (maximum number) Couplers GPA20 HD 76 mm standard 1 3 Dog clutch Linkage Transmission control Instrument panel Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor telescopic optional Cat. 2, hook or ball type (*) Fast-setting or pin-adjusting scale Fast-setting or pin-adjusting scale Stud or auto-hitch (*) standard optional Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof High-visibility roof Sloping bonnet Platform Reference (*): according to country optional (*) optional (*) 4 hydraulic optional optional optional Fieldstar Cab optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional optional Electronics AUTOTRONIC 3 DCC2 EHRC 2 4 T (standard) or 6 T (optional) optional optional optional optional optional optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 Creeper unit 14/1 100 (74) PERKINS 1104C-44T 4 / 4.4 Turbo Lucas DP 210 Viscostatic 80 A
Type Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional)
Axle model Final drives Axle shaft Straight shaft Flanged shaft Brake discs per trumpet housing Hand brake discs Differential lock
Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Hitch stud Swinging drawbar Roller type swinging drawbar Power take-off Type 540/1000/eco 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off
1B10.6
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.7
Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional -
optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.8
C . Model 6460
Model
Front axle AG 105 fixed or suspended (optional) Clockwise 5 optional optional 2.5 T Hydraulics Open Centre 57 l/min TFLS 100 l/min Closed Centre 110 l/min Closed Centre 150 l/min GBA20 (4x4) Power Shuttle Dynashift optional optional optional Rear axle Orbitrol steering Brake master cylinder Braking assistance Trailer brake Auxiliary spool valves (maximum number) Couplers GPA20 HD 76 mm standard 1 3 Dog clutch Linkage Transmission control Instrument panel Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor telescopic optional Cat. 2, hook or ball type (*) Fast-setting or pin-adjusting scale Fast-setting or pin-adjusting scale Stud or auto-hitch (*) standard optional Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof High-visibility roof Sloping bonnet Platform Reference (*): according to country optional (*) optional (*) 4 hydraulic optional optional optional Fieldstar Cab optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional Electronics AUTOTRONIC 3 DCC2 EHRC 2 4 T (standard) or 6 T (optional) optional optional optional optional optional optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 Creeper unit 14/1 115 (84) PERKINS EEM 1104C-E44TA 4 / 4.4 Turbo Bosch VP30 Viscostatic Air / air 80 A
Type Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional)
Axle model Final drives Axle shaft Straight shaft Flanged shaft Brake discs per trumpet housing Hand brake discs Differential lock
Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Hitch stud Swinging drawbar Roller type swinging drawbar Power take-off Type 540/1000/eco 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off
1B10.9
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.10
Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional -
optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.11
D . Model 6465
Model
Front axle 20.19 fixed or suspended (optional) Clockwise 5 optional optional 2.5 T or 3.5 T Hydraulics Open Centre 57 l/min TFLS 100 l/min Closed Centre 110 l/min Closed Centre 150 l/min GBA20 (4x4) Power Shuttle Dynashift optional optional optional Rear axle Orbitrol steering Brake master cylinder Braking assistance Trailer brake Auxiliary spool valves (maximum number) Couplers GPA20 HD 76 mm optional standard 1 3 Dog clutch Linkage Transmission control Instrument panel Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor telescopic optional Cat. 2/3, hook or ball type (*) Fast-setting or pin-adjusting scale Fast-setting or pin-adjusting scale Stud or auto-hitch (*) standard optional Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof High-visibility roof Sloping bonnet Platform optional (*) optional (*) 5 hydraulic optional optional optional Fieldstar Cab optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional optional (*) Electronics AUTOTRONIC 3 DCC2 EHRC 2 4 T (standard) or 6 T (optional) optional optional optional optional optional optional optional 160 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 Creeper unit 14/1 120 (89.5) PERKINS EEM 1106C-E66TA 6 / 6.0 Turbo Bosch VP30 Viscostatic Air / air 80 or 120 A
Type Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional)
Axle model Final drives Axle shaft Straight shaft Flanged shaft Brake discs per trumpet housing Hand brake discs Differential lock
Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Hitch stud Swinging drawbar Roller type swinging drawbar Power take-off Type 540/1000/eco 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off
1B10.12
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional optional 160 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.13
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional optional 160 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.14
E . Model 6470
Model
Front axle AG 105 Fixed Clockwise 5 optional optional 2.5 T Hydraulics Open Centre 57 l/min TFLS 100 l/min Closed Centre 110 l/min Closed Centre 150 l/min GBA20 (4x4) Power Shuttle Dynashift optional optional optional Rear axle Orbitrol steering Brake master cylinder Braking assistance Trailer brake Auxiliary spool valves (maximum number) Couplers GPA20 HD 76 mm standard 1 3 Dog clutch Linkage Transmission control Instrument panel Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor telescopic optional Cat. 2/3, hook or ball type (*) Fast-setting or pin-adjusting scale Fast-setting or pin-adjusting scale Stud or auto-hitch (*) standard optional Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof High-visibility roof Sloping bonnet Platform Reference (*): according to country optional (*) optional (*) 4 hydraulic optional optional optional Fieldstar Cab optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional Electronics AUTOTRONIC 3 DCC2 EHRC 2 4 T (standard) or 6 T (optional) optional optional optional optional optional optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 Creeper unit 14/1 125 (91) PERKINS EEM 1104C-E44TA 4 / 4.4 Turbo Bosch VP30 Viscostatic Air / air 80 A
Type Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional)
Axle model Final drives Axle shaft Straight shaft Flanged shaft Brake discs per trumpet housing Hand brake discs Differential lock
Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Hitch stud Swinging drawbar Roller type swinging drawbar Power take-off Type 540/1000/eco 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off
1B10.15
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.16
Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional -
optional optional 125 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.17
F . Model 6475
Model
Front axle 20.22 fixed or suspended (optional) Clockwise 5 optional optional 2.5 T or 3.5 T Hydraulics Open Centre 57 l/min TFLS 100 l/min Closed Centre 110 l/min Closed Centre 150 l/min GBA20 (4x4) Power Shuttle Dynashift optional optional optional Rear axle Orbitrol steering Brake master cylinder Braking assistance Trailer brake Auxiliary spool valves (maximum number) Couplers GPA20 SHD 82 mm optional standard 1 3 Dog clutch Linkage Transmission control Instrument panel Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor telescopic optional Cat. 2/3, hook or ball type (*) Fast-setting or pin-adjusting scale Fast-setting or pin-adjusting scale Stud or auto-hitch (*) standard optional Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof High-visibility roof Sloping bonnet Platform optional (*) optional (*) 5 hydraulic optional optional optional Fieldstar Cab optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional optional (*) Electronics AUTOTRONIC 3 DCC2 EHRC 2 6T optional optional optional optional optional optional optional 160 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 Creeper unit 14/1 135 (101) PERKINS EEM 1106C-E66TA 6 / 6.0 Turbo Bosch VP30 Viscostatic Air / air 80 or 120 A
Type Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional)
Axle model Final drives Axle shaft Straight shaft Flanged shaft Brake discs per trumpet housing Hand brake discs Differential lock
Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Hitch stud Swinging drawbar Roller type swinging drawbar Power take-off Type 540/1000/eco 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off
1B10.18
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional optional 160 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.19
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional optional 160 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.20
G . Model 6480
Model
Front axle 20.29 fixed or suspended (optional) Clockwise 5 optional optional 2.5 T or 3.5 T Hydraulics Open Centre 57 l/min TFLS 100 l/min Closed Centre 110 l/min Closed Centre 150 l/min GBA20 (4x4) Power Shuttle Dynashift optional optional optional Rear axle Orbitrol steering Brake master cylinder Braking assistance Trailer brake Auxiliary spool valves (maximum number) Couplers GPA20 SHD 82 mm standard (US), optional (EU) standard (EU), optional (US) 1 3 Dog clutch Linkage Transmission control Instrument panel Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor telescopic optional Cat. 2/3, hook or ball type (*) Fast-setting or pin-adjusting scale Fast-setting or pin-adjusting scale Stud or auto-hitch (*) standard optional Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof High-visibility roof Sloping bonnet Platform optional (*) optional (*) 5 hydraulic optional optional optional Fieldstar Cab optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional optional (*) Electronics AUTOTRONIC 3 DCC2 EHRC 2 6T optional optional optional optional optional optional optional 160 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 Creeper unit 14/1 145 (107.4) PERKINS EEM 1106C-E66TA 6 / 6.0 Turbo Bosch VP30 Viscostatic or Vistronic Air / air 80 or 120 A
Type Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional)
Axle model Final drives Axle shaft Straight shaft Flanged shaft Brake discs per trumpet housing Hand brake discs Differential lock
Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Hitch stud Swinging drawbar Roller type swinging drawbar Power take-off Type 540/1000/eco 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off
1B10.21
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional optional 160 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.22
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
optional optional optional 160 cc standard optional optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
1B10.23
H . Model 6485
Model
Front axle 20.43 fixed or suspended (optional) Clockwise 6 optional optional 2.5 T or 3.5 T Hydraulics Open Centre 57 l/min TFLS 100 l/min Closed Centre 110 l/min Closed Centre 150 l/min GBA10 Power Shuttle Dynashift optional optional Rear axle Orbitrol steering Brake master cylinder Braking assistance Trailer brake Auxiliary spool valves (maximum number) Couplers Electronics Transmission control Instrument panel Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor Fieldstar Cab Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof shiftable optional (*) optional (*) 5 hydraulic optional optional optional High-visibility roof Sloping bonnet Platform optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional optional (*) optional optional Cat. 2/3, hook or ball type (*) Fast-setting or pin-adjusting scale (*) Fast-setting or pin-adjusting scale (*) Stud or auto-hitch (*) standard optional DATATRONIC 2 (optional) EHRC 2 6T DATATRONIC 3 (optional) AUTOTRONIC 3 AUTOTRONIC 5 optional optional 80 cc / 205 cc standard optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 155 (115.6) SISU EEM Fortius 66ETA 6 / 6.6 Turbo Bosch VP30 Viscostatic or Vistronic Air / air 120 or 150 A
Type Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional)
Axle model Final drives Axle shaft Straight shaft Flanged shaft Brake discs per trumpet housing Hand brake discs ParkLock Differential lock Linkage Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Hitch stud Swinging drawbar Roller type swinging drawbar Power take-off Type 540/1000/eco 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off
GPA40 ND / HD 95 mm standard (US), optional (EU) standard (EU), optional (US) 1 6 optional 5" multidisc
DCC2 AUTOTRONIC 5
optional optional -
1B10.24
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
standard 80 cc / 205 cc 40 kph tractor 50 kph tractor (*) standard optional (*) 5 REAR 2 FRONT Decompression
1B10.25
I . Model 6490
Model
Front axle 20.43 fixed or suspended (optional) Clockwise 6 optional optional 2.5 T or 3.5 T Hydraulics Open Centre 57 l/min TFLS 100 l/min Closed Centre 110 l/min Closed Centre 150 l/min GBA10 Power Shuttle Dynashift optional optional Rear axle Orbitrol steering Brake master cylinder Braking assistance Trailer brake Auxiliary spool valves (maximum number) Couplers Electronics Transmission control Instrument panel Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor Fieldstar Cab Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof shiftable optional (*) optional (*) 5 hydraulic optional optional optional High-visibility roof Sloping bonnet Platform optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional optional (*) optional optional Cat. 2/3, hook or ball type (*) Fast-setting or pin-adjusting scale (*) Fast-setting or pin-adjusting scale (*) Stud or auto-hitch (*) standard optional DATATRONIC 2 (optional) EHRC 2 6T DATATRONIC 3 (optional) AUTOTRONIC 3 AUTOTRONIC 5 optional optional 80 cc / 205 cc standard optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 170 (126.8) SISU EEM Fortius 66ETA 6 / 6.6 Turbo Bosch VP30 Viscostatic or Vistronic Air / air 120 or 150 A
Type Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional)
Axle model Final drives Axle shaft Straight shaft Flanged shaft Brake discs per trumpet housing Hand brake discs ParkLock Differential lock Linkage Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Hitch stud Swinging drawbar Roller type swinging drawbar Power take-off Type 540/1000/eco 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off
GPA40 HD / HDE 95 mm standard (US), optional (EU) standard (EU), optional (US) 1 6 optional 5" multidisc
DCC2 AUTOTRONIC 5
optional optional -
1B10.26
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
standard 80 cc / 205 cc 40 kph tractor 50 kph tractor (*) standard optional (*) 5 REAR 2 FRONT Decompression
1B10.27
J . Model 6495
Model
Front axle 20.43 fixed or suspended (optional) Clockwise 6 optional optional 2.5 T or 3.5 T Hydraulics Open Centre 57 l/min TFLS 100 l/min Closed Centre 110 l/min Closed Centre 150 l/min GBA10 Power Shuttle Dynashift optional optional Rear axle Orbitrol steering Brake master cylinder Braking assistance Trailer brake Auxiliary spool valves (maximum number) Couplers Electronics Transmission control Instrument panel Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor Fieldstar Cab Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof shiftable optional (*) optional (*) 5 hydraulic optional optional optional High-visibility roof Sloping bonnet Platform optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional optional (*) optional EHRC 2 6T DATATRONIC 2 (optional) DATATRONIC 3 (optional) AUTOTRONIC 3 AUTOTRONIC 5 optional optional 80 cc / 205 cc standard optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 185 (138) SISU EEM Fortius 66ETA 6 / 6.6 Turbo Bosch VP30 Viscostatic or Vistronic Air / air 120 or 150 A
Type Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional)
Axle model Final drives Axle shaft Straight shaft Flanged shaft Brake discs per trumpet housing Hand brake discs ParkLock Differential lock Linkage Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Hitch stud Swinging drawbar Roller type swinging drawbar Power take-off Type 540/1000/eco 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off
GPA40 HDE 95 mm standard (US), optional (EU) standard (EU), optional (US) 1 6 optional 7" multidisc
DCC2 AUTOTRONIC 5
optional optional -
telescopic / with shoes / automatic (*) optional Cat. 2/3, hook or ball type (*) Fast-setting or pin-adjusting scale (*) Fast-setting or pin-adjusting scale (*) Stud or auto-hitch (*) standard optional
1B10.28
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
standard 80 cc / 205 cc 40 kph tractor 50 kph tractor (*) standard optional (*) 5 REAR 2 FRONT Decompression
1B10.29
K . Model 6497
Model
Front axle 20.43 fixed or suspended (optional) Clockwise 6 optional optional 3.5 T or 5 T Hydraulics Closed Centre 110 l/min Orbitrol steering Braking assistance Trailer brake GBA10 Power Shuttle Dynashift optional optional Rear axle Transmission control Instrument panel GPA30 HDE/Composite 95 mm / 110 mm standard 1 6 optional 7" multidisc Linkage Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof High-visibility roof optional Cat. 2/3, hook or ball type (*) Fast-setting or pin-adjusting scale (*) Fast-setting or pin-adjusting scale (*) Stud or auto-hitch (*) standard optional Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor Fieldstar Cab optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional optional DATATRONIC 2 (optional) EHRC 2 6T DATATRONIC 3 (optional) Auxiliary spool valves (maximum number) Couplers Electronics AUTOTRONIC 3 AUTOTRONIC 5 standard 80 cc / 205 cc standard optional (*) 4 electrohydraulic (2 SMS) or 4 mechanical Decompression
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 185 (138) SISU EEM Fortius 66ETA 6 / 6.6 Turbo Bosch VP30 Viscostatic or Vistronic Air / air 120 or 150 A
Type Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional)
DCC2 AUTOTRONIC 5
Axle model Final drives Axle shaft Straight shaft Brake discs per trumpet housing Hand brake discs ParkLock Differential lock
optional optional -
Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Hitch stud Swinging drawbar Roller type swinging drawbar
Power take-off Type 540/1000/eco 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off shiftable optional (*) optional (*) 6 hydraulic optional optional optional
1B10.30
Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
1B10.31
L . Model 6499
Dynashift
Engine Power at 2200 rpm, ISO hp (kW) Brand Type Number of cylinders/displacement Injection pump Fan Intercooler Alternator Gearbox Gearbox model Clutch/shuttle Type AutoDrive Creeper unit 4/1 Rear axle Axle model Final drives Axle shaft Straight shaft Brake discs per trumpet housing Hand brake discs ParkLock Differential lock Linkage Stabilisers Multi-hole drawbar 3-point linkage Clevis hitch Automatic clevis hitch Hitch stud Swinging drawbar Roller type swinging drawbar Power take-off Type 540/750/1000 750/1000 Number of clutch discs PTO brake Proportional PTO Automated PTO Front power take-off Front axle Model Type 20.48 fixed or suspended (optional) shiftable optional (*) optional (*) 6 hydraulic optional optional optional telescopic / with shoes / automatic (*) optional Cat. 2/3, hook or ball type (*) Fast-setting or pin-adjusting scale (*) Fast-setting or pin-adjusting scale (*) Stud or auto-hitch (*) standard optional GPA30 Composite 110 mm standard 1 6 optional 7" multidisc GBA10 Power Shuttle Dynashift optional optional 215 (158) SISU EEM Fortius 74ETA 6 / 7.4 Turbo Bosch VP44 Viscostatic or Vistronic Air / air 120 or 150 A
Rotational direction Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics Closed Centre 110 l/min Orbitrol steering Braking assistance Trailer brake Auxiliary spool valves (maximum number) Couplers Electronics Transmission control Instrument panel Linkage controller Draft sensors Sensor capacity Datatronic Dual control (front and rear) TIC with/without draft sensor Fieldstar Cab Suspension Rear-view mirrors Air conditioning Standard bonnet Bonnet option Standard roof High-visibility roof optional EHRC
AUTOTRONIC 3
AUTOTRONIC 5
optional optional -
optional manual (standard) or electric (optional) manual (standard) or automatic (optional) Fixed Hinged standard optional
1B10.32
Number of clutch discs Swivelling mudguard (4WD) 2-wheel drive Front linkage (optional) Hydraulics
1B10.33
1B10.34
CONTENTS
A . 6445 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Dynashift 16.9R38 tyres .................................................................................................. 3 6445 Dyna-6 - 19.4R38 tyres ........................................................................................... 3 B . 6455 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Dyanshift 18.4R38 tyres .................................................................................................. 4 6455 Dyna-6 - 18.4R38 tyres ........................................................................................... 4 C . 6460, 6465, 6470 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Dynashift 18.4R38 tyres .................................................................................................. 5 Dyna-6 18.4R38 tyres ...................................................................................................... 5 D . 6475, 6480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Dynashift 20.8R38 tyres .................................................................................................. 6 Dyna-6 20.8R38 tyres ...................................................................................................... 6 E . 6485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ND 20.8R42 tyres ............................................................................................................ 7 6485 HD 20.8R42 tyres ................................................................................................... 7 F . 6490 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 HD 20.8R38 tyres ............................................................................................................ 8 G . 6490, 6495, 6497 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 HDE 20.8R42 tyres .......................................................................................................... 9 H . 6497, 6499 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Composite 20.8R42 tyres ............................................................................................. 10
1B11.1
1B11.2
A . 6445
Dynashift 16.9R38 tyres
Ratio Speeds at 2,200 rpm, forward and reverse position (kph) Dynashift speeds Lo/1/A B C D 2/A B C D 3/A B C D 4/A B C D Hi/1/A B C D 2/A B C D 3/A B C D 4/A B C D 2,03 2,38 2,81 3,29 3,45 4,04 4,77 5,59 4,55 5,32 6,28 7,35 6,15 7,20 8,50 9,95 7,62 8,92 10,53 12,32 12,95 15,16 17,89 20,94 17,04 19,95 23,55 27,56 23,06 26,99 31,86 37,29 Creeper unit 0,51 0,59 0,70 0,82 0,86 1,01 1,19 1,40 1,14 1,33 1,57 1,84 1,54 1,80 2,13 2,49 Super creeper unit 0,14 0,17 0,20 0,23 0,25 0,29 0,34 0,40 0,32 0,38 0,45 0,52 0,44 0,51 0,60 0,71 * : Ratio not authorised. The speed limit is ensured by the gearbox electronic control. 1/A B C D E F 2/A B C D E F 3/A B C D E F 4/A B C D E F
1B11.3
B . 6455
Dyanshift 18.4R38 tyres
Ratio Speeds at 2,200 rpm, forward and reverse position (kph) Dynashift speeds Lo/1/A B C D 2/A B C D 3/A B C D 4/A B C D Hi/1/A B C D 2/A B C D 3/A B C D 4/A B C D 2,10 2,45 2,90 3,39 3,56 4,17 4,92 5,76 4,69 5,49 6,48 7,58 6,35 7,43 8,77 10,26 7,86 9,20 10,86 12,71 13,36 15,63 18,45 21,60 17,58 20,57 24,29 28,42 23,79 27,84 32,86 38,46 Creeper unit 0,52 0,61 0,72 0,85 0,89 1,04 1,23 1,44 1,17 1,37 1,62 1,90 1,59 1,86 2,19 2,57 Super creeper unit 0,15 0,17 0,21 0,24 0,25 0,30 0,35 0,41 0,33 0,39 0,46 0,54 0,45 0,53 0,62 0,73 * : Ratio not authorised. The speed limit is ensured by the gearbox electronic control. 1/A B C D E F 2/A B C D E F 3/A B C D E F 4/A B C D E F
1B11.4
1B11.5
D . 6475, 6480
Dynashift 20.8R38 tyres
Ratio Speeds at 2,200 rpm, forward and reverse position (kph) Dynashift speeds Lo/1/A B C D 2/A B C D 3/A B C D 4/A B C D Hi/1/A B C D 2/A B C D 3/A B C D 4/A B C D 2,21 2,59 3,06 3,58 3,34 3,91 4,62 5,40 4,95 5,79 6,83 8,00 7,67 8,98 10,60 12,41 8,29 9,70 11,45 13,40 12,52 14,65 17,30 20,25 18,54 21,70 25,61 29,98 28,76 33,66 39,73 Creeper unit 0,55 0,65 0,76 0,89 0,84 0,98 1,15 1,35 1,24 1,45 1,71 2,00 1,92 2,24 2,65 3,10 Super creeper unit 0,16 0,18 0,22 0,25 0,24 0,28 0,33 0,38 0,35 0,41 0,48 0,57 0,54 0,64 0,75 0,88 * : Ratio not authorised. The speed limit is ensured by the engine electronic control. 1/A B C D E F 2/A B C D E F 3/A B C D E F 4/A B C D E F
1B11.6
E . 6485
ND 20.8R42 tyres
Ratio Speeds at 2,200 rpm, forward and reverse position (kph) Dynashift speeds Lo/1/A B C D 2/A B C D 3/A B C D 4/A B C D Hi/1/A B C D 2/A B C D 3/A B C D 4/A B C D 2,55 2,99 3,53 4,13 3,86 4,52 5,34 6,24 5,52 6,46 7,62 8,92 7,99 9,35 11,04 12,92 9,83 11,51 13,59 15,90 14,87 17,40 20,54 24,04 21,24 24,86 29,34 34,35 30,76 36,00 42,50 Creeper unit 0,62 0,73 0,86 1,01 0,94 1,11 1,30 1,53 1,35 1,58 1,86 2,18 1,95 2,29 2,70 3,16 Lo/1/A B C D 2/A B C D 3/A B C D 4/A B C D Hi/1/A B C D 2/A B C D 3/A B C D 4/A B C D Ratio
1B11.7
F . 6490
HD 20.8R38 tyres
Ratio Speeds at 2,200 rpm, forward and reverse position (kph) Dynashift speeds Lo/1/A B C D 2/A B C D 3/A B C D 4/A B C D Hi/1/A B C D 2/A B C D 3/A B C D 4/A B C D 2,38 2,78 3,29 3,85 3,60 4,21 4,97 5,82 5,14 6,01 7,10 8,31 7,44 8,71 10,28 12,03 9,16 10,72 12,65 14,81 13,85 16,21 19,13 22,39 19,78 23,15 27,33 31,99 28,65 33,53 39,58 Creeper unit 0,58 0,68 0,80 0,94 0,88 1,03 1,21 1,42 1,26 1,47 1,74 2,03 1,82 2,13 2,51 2,94 -
1B11.8
1B11.9
H . 6497, 6499
Composite 20.8R42 tyres
Ratio Speeds at 2,200 rpm, forward and reverse position (kph) Dynashift speeds Lo/1/A B C D 2/A B C D 3/A B C D 4/A B C D Hi/1/A B C D 2/A B C D 3/A B C D 4/A B C D 2,35 2,75 3,25 3,80 3,55 4,16 4,91 5,75 5,08 5,94 7,01 8,21 7,35 8,61 10,16 11,89 9,05 10,59 12,50 14,63 13,68 16,02 18,90 22,13 19,55 22,88 27,01 31,61 28,31 33,14 39,11 Creeper unit 0,57 0,67 0,79 0,93 0,87 1,02 1,20 1,41 1,24 1,45 1,72 2,01 1,80 2,10 2,48 2,91 -
1B11.10
SPECIFICATIONS - Dimensions
CONTENTS
A . Adjusting track width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495 (welded steel discs) ...... 3 6497, 6499 straight axle shafts (welded steel discs ........................................................ 4 and semi-drop centre cast iron disc) ................................................................................ 4 B . Attachment points and dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6445/6455/6460/6470 Dynashift ...................................................................................... 5 6445 / 6455 / 6460 / 6470 Dyna-6 .................................................................................... 6 6465/6475/6480 Dynashift ............................................................................................... 7 6465/6475/6480 Dyna-6 ................................................................................................... 8 6485/6490/6495 Dynashift ............................................................................................... 9 6497/6499 Dynashift ...................................................................................................... 10
1B12.1
SPECIFICATIONS - Dimensions
1B12.2
SPECIFICATIONS - Dimensions
6445, 6455, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495 (welded steel discs)
Model 6445 6455 HD 6460 HD 1622 1708 1952 2038 43mm / spacer 8-hole flange, 203.2 6465 HD 6470 HD 6475 SHD 6480 SHD 6485 ND 1758 1808 1858 2088 2138 2188 6485 HD 6490 HD 1790 1840 1890 2120 2170 2220 25mm / spacer 8-hole flange, 275 6490 HDE 6495 HDE
Type of final drive units HD Without spacer (A) With 1 spacer (B) With 2 spacers (C) Without spacer (D) With 1 spacer (E) With 2 spacers (F) Spacer width Wheel attachment
Assembly with rim offset turned inwards (Fig. 1) 1685 1771 2015 2101 1812 1862 1912 2142 2192 2242
MA-01-03000A
Fig. 1
1B12.3
SPECIFICATIONS - Dimensions
6497, 6499 straight axle shafts (welded steel discs and semi-drop centre cast iron disc)
Welded steel discs (Fig. 2) Type Min. Inwards rim offset (1) Outwards rim offset (2) 1685 2015 1991 2321 HDE trumpet housings Max. Short shaft Long shaft 3065 3395 1662 1992 Composite trumpet housings Min. 2052 2382 Max. Short shaft Long shaft 2724 3054
Semi-drop centre cast iron discs (Fig. 2) Type HDE trumpet housings Min. Inwards disc offset Inwards rim offset (3) Outwards rim offset (4) Outwards disc Inwards rim offset offset (5) Outwards rim offset (6) 1504 1834 1978 2308 1808 2138 2282 2612 Max. Short shaft Long shaft 2882 3208 3356 3686 1448 1778 1922 2252 Composite trumpet housings Min. 1837 2167 2312 2642 Max. Short shaft Long shaft 2509 2839 2984 3314
MA-01-03002A
Fig. 2
1B12.4
3446.55
1031.8 89 567
539.55
896
890
222
810
305.08
6445/6455/6460/6470 Dynashift
7 8
216.03 106.1
3 6
MA-01-03171A
4 9 10
100
11
12
13
14
0 Y 280.241 280.241 280.241 280.241 275.241 275.241 20.79 -93.21 -59.21 -59.21 20.79 20.79 9 10 11 12 13 14 Z 8
Reference point
Diameter
M20
-1214
M20
-1112.55
M20
-1214
M20
-1112.55
M20
-664.55
Fig. 3
SPECIFICATIONS - Dimensions
1B12.5
M20
-664.55
1B12.6
539,75 549 400 890 457 34
1032
222
810
0 7 9 11
567
216 106
SPECIFICATIONS - Dimensions
100
MA-01-03936A
2 6 13 8 10 12 14
15
16
0 Y 280.241 280.241 280.241 280.241 275.241 275.241 138 -220 -93.21 20.79 -59.21 -59.21 12 13 14 15 16 20.79 11 20.79 10 Z 9 M12 M12 M12 M12 20 20 20 20
Reference point
M20
Diameter
M20
-1214
M20
-1112.55
M20
-1214
M20
-1112.55
M20
-664.55
M20
-664.55
Fig. 4
M20
95
3718
896
567 89 53
222
796
6465/6475/6480 Dynashift
404
216 109
100
11
MA-01-03169A
12
2 8 9 10
13
14
Reference point
Diameter
M20
-1452
M20
-1452
M20
-1350.5
M20
-1350.5
M20
-902.5
Fig. 5
SPECIFICATIONS - Dimensions
1B12.7
M20
-902.5
1B12.8
0 7 12 14
216 109 249 260 100
222
796
404
6465/6475/6480 Dyna-6
SPECIFICATIONS - Dimensions
355
2 6 9 16 10 11 13 15 8 17
18
19
MA-01-03938A
0 Y +/-280 +/-280 +/-280 +/-280 +/-275 +/-275 +/-274 +/-274 +/-274 -136.6 -196.6 -35 -94 20 -81.6 15 16 17 18 19 20 14 -81.6 13 20 12 M12 M12 M12 M12 20 20 20 20 Z 11 M20
Reference point
10
M20
148 148 563 563 807 807 1540 1540 1670 1670
+/-138 +/-138 +/-229 +/-179 +/-185 +/-157 +/-600.6 +/-500.6 +/-600.6 +/-500.6
Diameter
M20
-1452
M20
-1452
M20
-1350.5
M20
-1350.5
M20
-902.5
M20
-902.5
M20
59
M20
59
Fig. 6
M20
59
3932
763
130 600
370
6485/6490/6495 Dynashift
367
2 8 9 10
11
12
204
13
14
MA-01-03170A
Reference point
-45 -146.6 -206.6 -417 -228.12 +/-556.627 -228.12 +/-32.827 -227.6 +/-556.627 -227.6
Diameter
M20
-1573.38
M20
-1573.38
M20
-1471.78
M20
-1471.78
M20
-1023.78
Fig. 7
SPECIFICATIONS - Dimensions
1B12.9
M20
-1023.78
1B12.10
4086 922 244 51 824 600
1155
6497/6499 Dynashift
355
0 10
372 140
SPECIFICATIONS - Dimensions
203 330
7 9 11 12 13 14 15 16 17
MA-01-03003A
0 Y +/-272 +/-272 +/-272 +/-263 +/-272 +/-272 +/-272 +/-263 -104,7 -104,7 -104,7 -104,7 -29,7 -24,7 13 14 15 16 17 -24,7 12 -24,7 11 Z 10 M20 M20 M20 22 22 20,6 20,6 20,6
Reference point
M20
Diameter
M20
-1905
M20
-1735
M20
-1565
M20
-1023
M20
-1905
M20
-1023.78
M20
-1565
Fig. 8
M20
-1023
SPECIFICATIONS - Capacities
CONTENTS
A . Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1B13.1
SPECIFICATIONS - Capacities
1B13.2
SPECIFICATIONS - Capacities
A . Capacities
Engine oil Engine cooling 6445 6455 6460 6470 6465 6475 6480 6485 6490 6495 6497 6499 8 8 8 8 14.5 14.5 14.5 20 20 20 20 19 16.6 16.6 16.6 16.6 25.6 25.6 25.6 34 34 34 34 34 Transmission oil 68 (Dynashift) 63 (Dyna-6) 68 (Dynashift) 63 (Dyna-6) 68 (Dynashift) 63 (Dyna-6) 68 (Dynashift) 63 (Dyna-6) 72 (Dynashift) 65 (Dyna-6) 72 (Dynashift) 65 (Dyna-6) 72 (Dynashift) 65 (Dyna-6) 109 (ND) 108 (HD) 108 (HD) 107 (HDE) 108 (HDE) 147 (HDE) 142 Front axle 5.5 5.5 5.5 5.5 fixed 6 susp 8.5 fixed 6 susp 8.5 fixed 6 susp 8.5 fixed 6 susp 8.5 fixed 6 susp 8.5 fixed 6 susp 8.5 fixed 6 susp 8.5 fixed 10 susp 10 Front final drive units 2X0.9 2X0.9 2X1.1 2X1.1 fixed 2X0.7 susp 2X0.6 fixed 2X0.7 susp 2X0.6 fixed 2X1.5 susp 2X1.3 fixed 2X1.5 susp 2X1.3 fixed 2X1.5 susp 2X1.3 fixed 2X1.5 susp 2X1.6 fixed 2X1.5 susp 2X1.6 fixed 2X1.9 susp 2X1.9 Fuel tank 150 150 150 150 270 270 270 380 380 380 410 410 Additional tank 50 50 50 50 Windshield washer 4 4 4 4 4 4 4 4 4 4 4 4 Air conditioning 1550 1550 1550 1550 1550 1550 1550 1550 1550 1550 1550 1550
Rear final drive units for 6490 HDE, 6495 and 6497 HDE: 2 X 3.6 litres; for 6499: 2 X 4.5 Litres Value in litres, and in grammes for the air conditioning circuit
1B13.3
SPECIFICATIONS - Capacities
1B13.4
Miscellaneous
1C10 - Miscellaneous
CONTENTS
A . Conversion tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 B . Retaining compounds and sealing products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 C . Tightening torques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1C10.1
Miscellaneous
1C10.2
Miscellaneous
A . Conversion tables
LENGTH multiply by mm in m ft km mile x 0.0394 x 25,400 x 3.2808 x 0.3048 x 0.6214 x 1.6093 SURFACE AREA multiply by mm in m ft ha acre x 0.0016 x 645.16 x 10,764 x 0.0929 x 2.4711 x 0.4047 VOLUME multiply by cm3 in3 m3 ft3 x 0.06102 x 16,387 x 35,315 x 0.0283 in3 cm3 ft3 m3 gramme oz CAPACITY multiply by ml liquid oz litre imp. gal. litre gal. English US imp. gal. gal. English US x 0.0351 x 28,413 x 0.2200 x 4.5640 x 0.2640 x 3.7850 x 1.2010 x 0.8330 liquid oz ml imp. gal. litre gal. English US litre gal. English US imp. gal. C F kg pounds kg British ton ton (metric) British ton kph mph in mm ft m acre ha bar lbf/in in mm ft m mile km ps ch kW ch
TORQUE multiply by Nm lbf ft x 738 x 1,356 PRESSURE multiply by x 14,504 x 0.0690 SPEED multiply by x 0.6214 x 1.6093 WEIGHT multiply by x 0.0353 x 28,350 x 2.2046 x 0.4536 x 0.00098 x 1016.1 x 0.9842 x 1,016 TEMPERATURE C x 1.8 + 32 (F - 32)/1.8 F C oz gramme pound kg British ton kg British ton ton (metric) mph kph lbf/in bar lbf ft Nm
1C10.3
Miscellaneous
Application method for Loctite products
1. Remove all traces of previous sealants and corrosion - mechanically: wire brush or emery cloth - chemically: "DECAPLOC 88" Leave the product to take effect and then wipe clean. 2. Degrease the components with dry solvent - preferably, use Super Solvant Sec LOCTITE 706. 3. Allow the solvents to evaporate 4. Apply the recommended type of LOCTITE product to the parts: - for blind tapped holes, apply a quantity of the product to the last threads at the bottom of the hole - for cylindrical fittings, apply the product on the two mating faces using a clean brush - for mating faces, apply a bead to one of the two faces, circling the holes, and then tighten as quickly as possible NOTA: - Do not use too much of the compound in order to avoid locking adjacent parts. - Do not attempt to retighten after 5 minutes of curing, in order to avoid breaking the film of compound. - If the ambient temperature is less than +10C, and to ensure quicker setting of Loctite compounds, (except SILICOMET), use LOCTITE T 747 activator on at least one of the two parts. Excess sealant outside the joint will not harden (anaerobic curing of the compound i.e. curing takes place only in absence of oxygen).
NOTE: use the product Form A gasket 2 when sealing between plastic material and cast iron (or steel). These products can be ordered from the following address: Henkel Loctite France S.A. 10, avenue Eugne Gazeau BP 40090 F-60304 Senlis Cedex, FRANCE
Grease
When grease is used in components which are in contact with transmission oil, use grease which is miscible with oil to avoid clogging the hydraulic filters. Use "Amber Technical" grease supplied by: WITCO company, 76320 Saint-Pierre des Elfes, France.
1C10.4
Miscellaneous
C . Tightening torques
Use the tightening torques for screws and nuts as indicated in the tables: - 1 and 2 for metric threads - 3 and 4 for inch-system threads When a specific torque is required, it is stated in the text. Tables 1 and 3 indicate the nomal tightening torque values to apply to threaded zinc-plated elements, with normal nuts, with coarse or fine threads, with or without a flat washer or lockwasher, and weldable nuts more than 0.8 d high. Tables 2 and 4 indicate the reduced tightening torque values to apply to threaded elements in assemblies with zinc-plated self-locking locknuts, phosphate-coated nuts and screws, thin nuts, waldable nuts less than 0.8 d high. These values are to be applied to dry assemblies. If the threads are oiled, reduce the tightening torques. NOTA: Read the tensile grade on the screw head to determine the corresponding tightening torque. Example:
1C10.5
Miscellaneous
1C10.6
Miscellaneous
Min
2 4 6 16 31 55 90 140 280 490 800 1200 1700 2400 4100
Max
3.3 6.3 8.9 22 43 75 120 180 370 660 1060 1600 2200 3200 5400
Min
2 3 5 13 25 44 72 110 220 390 640 960 1360 1920 3280
Max
2.6 5 7.1 18 34 60 96 140 300 530 850 1280 1760 2560 4320
1C10.7
Miscellaneous
1C10.8