Professional Documents
Culture Documents
- strong vibration test (for instance for exhaust gas temperature sensors), immersion test,
22 %&uipment 'hich is supplied by battery is to be operated satisfactorily under permanent voltage variations(
from ) *"+ to - #, + if connected to the battery during charging, from )#"+ to -#,+ if not connected to the battery during charging.
23 -or hydraulic or pneumatic e&uipment, the operational characteristics are to be maintained under permanent supply pressure variations of . #"+ of the rated pressure (duration , minutes). 24 /uring all the tests, the operation characteristics are to be satisfactory and kept 'ithin the limits indicated by the manufacturer.
* interruptions of po'er supply during , minutes, s'itch off time( *" seconds for each.
26 Test is to be carried out before and after damp heat test, cold test and salt mist test( bet'een all circuits and earth,
on the supply terminals 'here appropriate. The testing conditions are specified in Table !-
12 "#- .
Table 19-02-111
2ombination 3br
# * 4
),
before (7.8i)
:n ; $, :n < $,
after (7.9)
," "
" ""
Then, the e&uipment is submitted to transient variations under the limit conditions specified in Table !-"#- . Table 19-02-11
High voltage
21 Separate circuits are to be tested against each other and all circuits connected 'ith each other tested against earth. -re&uency transient variation (recovery time( , s) + ) " - " >rinted circuits 'ith electronic e&uipment may be removed during the test. ## The testing conditions are specified in Table !-"#-?0. The period of application of the test voltage is minute.
2ombination 3br
, $
@:6%A: 0%6?TAS
st march 199