Professional Documents
Culture Documents
This PDF has been made available as a complimentary service for you to assist in evaluating this model for your testing requirements. TMG offers a wide range of test equipment solutions, from renting short to long term, buying refurbished and purchasing new. Financing options, such as Financial Rental, and Leasing are also available on application. TMG will assist if you are unsure whether this model will suit your requirements. Call TMG if you need to organise repair and/or calibrate your unit. If you click on the Click-to-Call logo below, you can all us for FREE!
Disclaimer: All trademarks appearing within this PDF are trademarks of their respective owners. Form 080/01
Data sheet
General
The Portable EMF Measurement System TS-EMF measures electromagnetic elds in the environment (EMF). The measurements are a necessary basis for discussions about the effects of electromagnetic radiation. Due to its wide frequency range from 30 MHz to 3 GHz, the TS-EMF complies with all common radio services: Mobile radio (GSM, CDMA) UMTS (frequency-selective) CPICH decoding for UMTS (option) DECT Bluetooth WLAN (802.11b, g) Sound broadcasting TV broadcasting (analog, DVB) The frequency-selective measurements not only determine total emission but also permit assignment to specic radio services. All common measurement methods and regulations are supported. Graphic and numeric result display with reference to a limit value simplies evaluation.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Rohde&Schwarz is under license.
Outdoor
Indoor
Statistical data
System design
Due to its compact design, the TS-EMF can be used for both mobile and stationary measurements. It consists of the following components: An isotropic sensor for accurate eldstrength measurements independent of the signals direction of incidence and polarization A spectrum analyzer a wide range of spectrum analyzers and test receivers as well as radio network analyzers from Rohde & Schwarz being supported RFEX, easy-to-use EMF measurement software that is exible in conguration and evaluation All system components including the Spectrum Analyzer FSH and the Radio Network Analyzer TSMU t into the transit case that comes with the system. The RFEX software can also be optionally installed directly on the Spectrum Analyzer FSH or the Test Receiver ESPI, allowing a compact solution comprising a spectrum analyzer and antenna.
The TS-EMF is the ideal measurement equipment especially for measurements using the multipoint method in line with the (still temporary) European standard prEN 50400. An optical and acoustic indication of the maximum value optimally supports the stirring method. The use of alternative antennas is possible. A quick start using the settings last selected makes it easier to perform a large sequence of measurements. Together with other measurement modes, for example the quick overview measurement or measurements of longterm behavior, the TS-EMF covers all types of EMF measurements. The TS-EMF has also proven to be the ideal solution as a measurement system for stationary monitoring.
Efciency through
easy operation
To perform a measurement, simply select the desired mode (single or long-term measurement) and the packets to be measured (e.g. radio services). Measurement packets for all common radio services are already included. The measurement itself runs automatically via the isotropic antenna independently of the signals direction of incidence and polarization. With the automatically generated test report, interpretation is direct, fast and simple. It takes just a single mouse click to start subsequent measurements with the same settings. The TS-EMF requires minimum effort and only little time for carrying out measurements on site and generating the test report.
RFEX software for measurements using measurement packets
The numeric and graphic display of the results in MS Excel immediately following the measurement makes on-site interpretation of the results quick and easy: List of summed values and list for individual frequencies (e.g. single emission, emission of antenna facility, total emission) Graphics for the summed values and the individual emitters as well as spectrum display Display of measured levels as absolute values and as a function of the limit value Display for different limit values Simple extrapolation to maximum system utilization Congurable output format Straightforward display on PC with all possibilities for displaying and processing with MS Ofce
1)
1)
Frequency MHz
88.4 97.3 99.7 103.2 Total (RMS) Total (square) Max. single value
0.015 0.01 0.005 0 87.5 89.5 91.5 93.5 95.5 97.5 f in MHz 99.5 102 104 106 108
If MS Excel is not installed on the laptop, the result output is in a purely numeric format.
FM radio 0.8
o/oo of limit value
accurate measurements
Measurement packets are used to detect each radio service with optimized measurement parameters. The packets contain all the important information such as bandwidth, measurement times, detector to be used and measurement frequencies. This makes it possible to activate different measurement modes for a radio service e.g. in the case of GSM fast measurements for the stirring method and slower measurements in which the utilization of the TDMA channels is exactly taken into account. Extrapolations to maximum system utilization can also be easily performed. A description of specic parameters as well as the generation and adaptation of measurement packets to custom tasks are also included. All measurement packets supplied with the system are veried by Rohde & Schwarz. The hardware used also provides high measurement accuracy: Each isotropic antenna comes with customized calibration data. In addition, DKD (German Calibration Service) calibration is available for all components.
All packets Packet UMTS FM radio TV VHF III TV UHF GSM 900 GSM 1800 DECT Total o/oo RMS 1.8110 1.1502 0.0000 0.1937 1.6935 1.5780 0.0685 3.1627
All packets RMS 2.00
o/oo square 3.2798 1.3231 0.0000 0.0375 2.8678 2.4901 0.0047 10.0030
o/oo RMS
dio
FI
90
VH
UH
TS
ra
18
00
II
GS M
GS M
UM
FM
TV
Result display, example of single packet (left) and all measurement packets (top)
DE
Packet
TV
CT
Packet: UMTS Scrambling code 475 381 217 30 Total (RMS) 2.0973 Total (square) Max. single value
UMTS 2
4.3985 1.5738
Specications
Isotropic antenna Frequency range Measurement principle 30 MHz to 3 GHz isotropic reception due to orthogonally arranged antenna elements that are electronically switched radome protection against mechanical damage and environmental hazards instrument-specic calibration data, stored on USB dongle RF solid-state switch approx. 1 mV/m to 100 V/m integrated 2 m cable, ferritized (8 m extension cable, see options) N male 9-contact D-Sub, incl. adapter cable for spectrum analyzer -inch thread, quick connector for antenna 10 C to +50 C, safety class IP54 via spectrum analyzer or laptop length 475 mm, 170 mm 1.3 kg Recommended application Equipment supplied MS Excel 2000, XP isotropic sensor with connecting cable EMF Software RFEX operating manual (on CD) tripod adapter adapter cable for spectrum analyzers transit case
Mechanical design
Antenna factor Axis switching Field-strength measurement range Connecting cable RF connector Switch connector Tripod adapter Ambient conditions Power supply Dimensions Weight (incl. cable) Requirements for laptop (not included with equipment supplied) Operating system Hard disk space Display resolution Interfaces
Ordering information
Designation
Portable EMF Measurement System (without FSH, laptop and carrying bag) Options Cable Set for TS-EMF (8 m) Tripod for TS-EMF Desktop Tripod for TS-EMF DKD Calibration of Isotropic Antenna UMTS Option 1: CPICH UMTS Decoding (can be used with FSP/FSU, ESPI or TSMU) PCMCIA GPIB Card TS-EMF-Z2 TS-EMF-03 TS-EMF-05 TS-EMF-DKD TS-EMF-U1 1166.5708.02 1101.8477.03 1166.5850.02
Type
TS-EMF
Order No.
1158.9295.03
1119.4715.02 0322.2267.02
MS Windows 2000, XP, XP Tablet PC Edition min. 10 Mbyte min. 800 600 USB and depending on measurement instrument FSH: RS-232-C (or USB with FSH-Z37) FSP/FSU, ESPI/ESCI: LAN or GPIB TSMU: FireWire
Strain Relief for PCMCIA Card UMTS Option 2: CPICH UMTS Decoding with TSMU-H PCMCIA FireWire Card
1501.1130.02
ISO 9001
DQS REG. NO 1954 QM
ISO 14001
DQS REG. NO 1954 UM
www.rohde-schwarz.com
Europe: Tel. +49 1805 12 4242, e-mail: customersupport@rohde-schwarz.com North America: Tel. +1 410-910-7988, e-mail: customer.support@rsa.rohde-schwarz.com Asia: Tel. +65 68463710, e-mail: customer-service@rssg.rohde-schwarz.com
is a registered trademark of Rohde & Schwarz GmbH & Co. KG Trade names are trademarks of the owners Printed in Germany (Bi bb) PD 0758.2777.32 TS-EMF Version 02.00 March 2005 Data without tolerance limits is not binding Subject to change