Professional Documents
Culture Documents
If you cant nd what youre looking for in this catalogue, or need more information, please visit the Davies, Craig website. As well as full product details, the site is constantly updated with news and new product information that will help you with your Davies, Craig product selection.
Introduction ................................................................. 6 EWP115 Alloy & EWP/Fan Controller combo ................. 7 EWP115 & EWP/Fan Controller combo ........................ 8 EWP80 & EWP/Fan Controller combo ......................... 9 EWP product detail & specications ........................ 10 EBP product detail & specications . ....................... 15 Digital controller product detail & specications . ..... 16 Spare parts EWP adaptors ........................................ 9 Introduction ................................................................ 17 Chrome Fans ............................................................... 19 Product detail & specications ................................... 20 Thermal switches ........................................................ 29 Model selection guide fans & switches ..................... 30 ThermoCap . ............................................................... 35 Spare parts fan blades, mounting kits, shrouds, DC motors ....................... 36 Introduction ............................................................... 40 Competitor cross-reference ........................................ 41 Fan clutch mounting / critical measurements .............. 42 Fan clutch thermal .................................................. 42 Model selection guide ................................................. 44
Thermatic fans
Fan clutches
Introduction ................................................................ 57 Transmission oil coolers specications ................... 58 Power steering oil cooler specications.................... 61 Model selection guide .................................................. 61 Accessories Quick Fit Kit.......................................... 58
Tyre Pressure Monitoring System (TPMS) ................... 62 Tyre pressure monitoring sensors (wireless) ............. 62 Sensor booster .......................................................... 62
A History of Service
How did a small Australian company grow to become a world leader in its eld? The answer is simple. Innovation. The ability to create new solutions to problems and a commitment to technology, service and quality has made Davies, Craig one of Australias most successful exporters, providing class-leading automotive cooling products to markets around the world.
are supplied as original equipment to automotive manufacturers throughout the world. Davies, Craig was established to satisfy a market need and our ongoing investment in Research and Development will ensure we continue to provide better and more efcient products. Our facilities include a fully-computerised wind tunnel and balancing machine which provides a fan performance measurement service to the industry. An electronicallycontrolled cooling system, complete with radiator, fan, Electric Water Pump and programmed heat source, simulates the daily conditions experienced by any car on the road. As part of its continuous improvement program Davies, Craig invested heavily in two state-of-the-art product testing machines. To further scrutinise ever-increasing sales volumes of our Electric Water Pumps, a Mass Flow Leak Tester and Pressure Decay Tester have been installed in the production line. The Mass Flow Leak Tester is a onestep process designed to pick up any abnormalities in the EWP80 pump. This specic high-pressure test determines whether there are any abnormalities such as leaks and provides an excellent high-quality test standard and review process. The Pressure Decay Tester will monitor pressure over a given time to determine to any deterioration in pressure of the EWP115 pump. Both test methods yield ner accuracy and are valuable additions to our EWP production process. With increased demands on pump performance and durability, the Electric Water Pump is fast becoming a more popular mode of engine cooling management as the benets of independent electric water pump operation is becoming more apparent.
Available for radiators and air conditioning condensers, our fans improve engine power and economy, reduce noise and warm your motor more quickly. The Thermal Switch activates the fan only when its needed, protecting your engine from overheating, even when carrying heavy loads. Likewise, the range of universalt Electric Water Pumps have achieved an increase of 6% more power in a similar application. The EWP/Fan Digital Controller manages the pump output by varying the speed and the coolant ow to maintain the targeted (set) engine temperature. The Controller also manages the activation of the Thermatic Fan.
OEM Capability
Davies, Craig has the facilities to design and develop an Electric Water Pump for automotive Original Equipment Manufacturing. Using the latest CAD, rapid prototyping and test equipment the product can be tailor-made to suit dedicated installations. Joint venture and other commercial types of arrangements are welcome.
The revolutionary range of Davies, Craigs patented Electric Water Pumps are performance accessories suitable for most makes of engines.
There are two models available: the EWP80 (80 litres per minute) suitable for engines up to 3.0L and the EWP115 (115 litres per minute) for larger, more powerful engines and 4WDs. They are designed to replace a vehicles existing mechanical belt-driven water pump. Both models are simple, t-it-yourself electric water pumps lightweight, compact, more powerful design suitable for small, large, plus high-performance cars and 4WD vehicles. They are vital performance products that improve engine cooling management while giving more power and torque and evenly dissipating heat soak. All deliver 3% to 5% improved fuel economy while lowering environmental
impact by reducing emissions. The EWP80 is sufcient for use as a booster to your existing mechanical pump.
The EBP (Electric Booster Pump) is a brushless 12 volt, high-ow, magnetically-driven water pump. The EBP motor has no brushes to wear out ever and the pump is magnetically driven by the motor, which means that no shaft sealing is required. There is only one moving part, the impeller, and it is oating in the coolant. The pump chamber is hermetically sealed for trouble-free operation. The EBPs ease of installation, low-current draw, highow capacity and long life make it ideal for a range of applications. The kit (part #9001) comes with everything you need for easy installation including, easy to understand, do-ityourself instructions.
The EBP is available in: #9001 Kit, #9002 Short, #9012 EBP only See page 15 for full details.
EWP115 Alloy/Digital Controller Combo 115 litres/min Part #8050 Take total control of cooling your engine
more power more cooling increase fuel efciency world-leading technology extend engine life universal t lightweight alloy
Turbocharge your engines cooling system with an EWP 115 Alloy Electric Water Pump
The revolutionary Davies, CraigEWP115 Electric Water Pump is now available in lightweight aluminium.
Designed for universal engine tment, and with the high-performance pro, sprint, tarmac, circuit and drag racer in mind, the EWP115 Alloy has 1 NPT internal threads at inlet and outlet for neat, tight, dash tting applications. All the same exciting features offered on the EWP115 are here on the street-smart alloy Electric Water Pump. This rugged alloy electric water pump is designed to replace the engines existing mechanical water pump. This essential performance accessory increases power
to your vehicles drive wheels and improves coolant temperature control. The EWP115 Alloy is a universal, do-it-yourself, easy installation tment to engines up to seven litres. By removing the parasitic power losses of belt-driven water pumps, the EWP115 Alloy releases up to 10kW (13hp) of extra power, increased torque and fuel savings. Combine it with the EWP & Fan Digital Controller and the pump continues to run after youve switched off, eliminating heat soak and extending engine life. The EWP115 Alloy and EWP & Fan Digital Controller Combination Pack is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.
115 litres/min
Part #8030
The EWP 115 Electric Water Pump and EWP & Fan Digital Controller
The EWP115 is a simple, DIY electric water pump designed to replace your existing beltdriven water pump.
Lighter and more powerful, the EWP115 (115 litres per minute) pump is suitable for small, medium, large, high-performance and 4WD vehicles. Its a performance accessory that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy. Mechanical belt-driven water pumps run directly off the motor and sap engine power the EWP115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp).
Combined with the EWP & Fan Digital Controller, the pump continues to run after youve switched off, eliminating heat soak and extending engine life. Davies, Craigs revolutionary, Australian-designed EWP pumps are made from anti-corrosive, lightweight nylon reinforced with breglass. Universal t allows for easy mounting into the bottom radiator hose. Our kits come with easy-to-understand DIY instructions and everything you need for easy installation, including different couplings to t every hose size and all necessary electrical wiring. The EWP115 and EWP & Fan Digital Controller Combination Pack is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.
80 litres/min
Part #8007
The EWP80 Electric Water Pump and EWP and Fan Digital Controller Combo simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump and engine thermostat.
The EWP80 will t most vehicle makes and models tted with naturally-aspirated or turbo engines up to three litres. The revolutionary, Australian-designed EWP80 is made from anti-corrosive, lightweight, heat-resistant, glass-lled nylon and incorporates a ceramic faced impellor seal for long-life durability. The EWP80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP can provide up to 10kW (13hp) of extra power and increased torque. The EWP and Fan Digital Controller will manage both the EWP and Thermatic fan operations. The Digital Controller will vary the speed of the EWP in response to the engines coolant temperature. Five temperature settings are provided on the Controller for either maximum power or fuel efciency. The Thermatic Fan/s will be activated automatically once the engine coolant rises 3C (5.4F) above the targeted (set) temperature. The Digital Controller will automatically run on for two minutes (or to 5C/9F below the set temperature) after engine shut down, eliminating heat soak and extending engine life. The EWP80 Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for tment to your vehicles engine, including an easy-to-follow DIY instruction booklet. Please refer to pages 14 and 16 in this catalogue for product specications.
Spare Parts
#1026
#1025
#1029
#1027
#1028
Part # Contents Part # Contents 8505 90 Hose adaptor (suits EWP) 8307 8309 8510 8511 8509 Straight adaptor Elbow adaptor 3mm sleeve rubber adaptor 6mm sleeve rubber adaptor 0 ring
Part # Contents 1025 1026 1027 1028 1029 Alloy adaptor - 1 NPT Alloy adaptor - 1 NPT Alloy adaptor straight - 25mm (1) Alloy adaptor straight - 19mm () 1 NPT-16 adaptor
EWP 115
115 litres/min
Part #8040
Technical specications
Operating voltage Maximum current Flow rate (max) Operating temperature Pump design Motor life 3V DC to 15V DC 10A 115 L/min (1822 US gal/hr) @ 13V DC -40 to 130C (-40 to 266F) Clockwise centrifugal with volute chamber 3,000 hours continuous at 80C (176F) and 12V DC; 7,000 hours with an EWP/Fan Digital Controller 1,151 grams (2.56 lb) Aluminium 500 kPa (72.5 psi) Ceramic face seal 38mm to 51mm (1 to 2) Internal thread - inlet: 1 NPT - outlet: 1 NPT
Pump weight Pump material Burst pressure Seal Fits hose sizes
Kit contents
Part # 8140 8515 8510 8512 8525 Description EWP 115 Alloy Pump
Qty 1 1 2 2 1
Wiring harness Sleeve 3mm rubber adaptors Hose clamps Assorted hardware bag - includes relay #0533
Options
Part # 8505 1025 Description 90 Hose adaptor Alloy adaptor 1 (2 required) Qty 1 1
38mm (1 1/2) 95.7mm (3 3/4) 84mm (3 5/16)
Dimensions
128mm (5)
38mm (1 1/2)
The EWP is a recirculating pump which is ideal for a closed system similar to an automotive cooling system; it is not self-priming.
10 | Davies, Craig CATALOGUE
EWP 115
115 litres/min
Part #8041
Technical specications
Operating voltage Maximum current Flow rate (max) Operating temperature Pump design Motor life Pump weight Pump material Burst pressure Seal Fits hose sizes 10V DC to 27V DC 5.5A @ 24V 115 L/min (1822 US gal/hr) @ 24V DC -40 to 130C (-40 to 266F) Clockwise centrifugal with volute chamber 3,000 hours continuous at 80C (176F) and 24V DC; 1,151 grams (2.56 lb) Aluminium 500 kPa (72.5 psi) Ceramic face seal 38mm to 51mm (1 to 2) Internal thread - inlet: 1 NPT - outlet: 1 NPT
EWP115 - 24V PRESSURE VS FLOW @ 24.0V Actual EWP115 - 24V Pressure v Flow @ 24.0V Actual
Kit contents
Part # 8141 8515 8510 8512 8527 Description EWP115 Alloy 24V Pump Wiring harness (with 10A fuse) Sleeve 3mm rubber adaptors Hose clamps Assorted hardware bag - includes 24V relay #0534 Qty 1 1 2 2 1
4.5 4 3.5 3
0.3 0.2
2 1.5 1
0.1
0.5 0
0.0
0
0
20
317
40
634
60
951
80
1268
100
1585
120
1902
140 L/min
2219 gal (US)/hr
FLOW
Current Draw Poly. (24V EWP115)
Option
Part # 8505 1025 Description 90 Hose adaptor 1 NPT alloy adaptors Qty 1 2
38mm (1 1/2) 95.7mm (3 3/4) 84mm (3 5/16)
Dimensions
128mm (5) 38mm (1 1/2)
The EWP is a recirculating pump which is ideal for a closed system similar to an automotive cooling system; it is not self-priming.
Davies, Craig CATALOGUE | 11
CURRENT (A)
0.4
2.5
EWP 115
115 litres/min
Part #8025
The worlds first universal-fit, automotive Electric Water Pump. Suitable for all makes and models but will excel on large six-cylinder V8 engines, heavy-duty 4WDs and most engines over 400HP .
Technical specications
Operating voltage Maximum current Flow rate (max) Operating temperature Pump design Motor life 3V DC to 15V DC 10A 115 L/min (1822 US gal/hr) @ 13V DC -40 to 130C (-40 to 266F) Clockwise centrifugal with volute chamber 3,000 hours continuous at 80C (176F) and 12V DC; 7,000 hours with an EWP/Fan Digital Controller 980 grams (2.16 lb) Nylon 66, 30% glass-lled 500 kPa (72.5 psi) Ceramic face seal 38mm to 51mm (1 to 2)
Pump weight Pump material Burst pressure Seal Fits hose sizes
Kit contents
Part # 8125 8515 8510 8512 8525 Description EWP 115 Pump
Wiring harness Sleeve 3mm rubber adaptors Hose clamps Assorted hardware bag - includes relay #0533
Option
Part # 8505 Description 90 Hose adaptor Qty 1
95.7mm (3 3/4) 84mm (3 5/16)
38mm (1 1/2)
Dimensions
128mm (5) 38mm (1 1/2)
The EWP is a recirculating pump which is ideal for a closed system similar to an automotive cooling system; it is not self-priming.
12 | Davies, Craig CATALOGUE
EWP 115
115 litres/min
Part #8026
Technical specications
Operating voltage Maximum current Flow rate (max) Operating temperature Pump design Motor life Pump weight Pump material Burst pressure Seal Fits hose sizes 10V DC to 27V DC 5.5A @ 24V 115 L/min (1822 US gal/hr) @ 13.5V DC -40 to 130C (-40 to 266F) Clockwise centrifugal with volute chamber 3,000 hours continuous at 80C (176F) and 12V DC; 980 grams (2.16 lb) Nylon 66, 30% glass-lled 500 kPa (72.5 psi) Ceramic face seal 38mm to 51mm (1 to 2)
EWP115 - 24V PRESSURE VS FLOW @ 24.0V Actual EWP115 - 24V Pressure v Flow @ 24.0V Actual
Kit contents
Part # 8126 8515 8510 8512 8527 Description EWP115 24V Pump Wiring harness Sleeve 3mm rubber adaptors Hose clamps Assorted hardware bag - includes relay #0534 Qty 1 1 2 2 1
4.5 4 3.5 3
0.3 0.2
2 1.5 1
0.1
0.5 0
0.0
0
0
20
317
40
634
60
951
80
1268
100
1585
120
1902
140 L/min
2219 gal (US)/hr
Option
Part # 8505 Description 90 Hose adaptor Qty 1
FLOW
Current Draw Poly. (24V EWP115)
38mm (1 1/2)
Dimensions
128mm (5) 38mm (1 1/2)
The EWP is a recirculating pump which is ideal for a closed system similar to an automotive cooling system; it is not self-priming.
Davies, Craig CATALOGUE | 13
CURRENT (A)
0.4
2.5
EWP 80
80 litres/min
Part #8005
The worlds first universal-fit, automotive Electric Water Pump. Suitable for naturallyaspirated and turbo engines up to 3 litres.
Technical specications
Operating voltage Maximum current Flow rate (max) Operating temperature Pump design Motor life 3V DC to 15V DC 7.5A 80 L/min (1268 US gal/hr) @ 13.5V DC -20 to 130C (-4 to 266F) Clockwise centrifugal with volute chamber 3,000 hours continuous at 80C (176F) and 12V DC; 6,000 hours with an EWP/Fan Digital Controller 900 grams (2.0 lb) Nylon 66, 30% glass-lled 350 kPa (50 psi) Ceramic face seal 32mm to 51mm (1 to 2)
EWP 80 PRESSURE VS FLOW @ 13.0V EWP80 Pressure v Flow @ 13.0V Actual
Pressure
(PSI) (BAR)
Pump weight Pump material Burst pressure Seal Fits hose sizes
Kit contents
Part # 8105 8307 8309 8509 8515 8510 8511 8512 8908 Description EWP80 Pump Straight adaptor Elbow adaptor O ring Wiring harness Sleeve 3mm rubber adaptors Sleeve 6mm Hose clamps Assorted hardware bag - includes relay #0533 Qty 1 1 1 2 1 2 2 2 1
8.0
0.6
6.0
7.2 0.5
5.5
5.0
5.8
0.4
4.3
0.3
4.0
2.9
0.2
3.5
3.0
1.4
0.1
2.5
0.0
0.0 0
0
2.0
10
159
20
317
30
476
40
634
FLOW
50
793
60
951
70
1110
80
1268
90
1427
L/Min
gal (US)/hr
Poly. (EWP80)
Options
Part # 1025 1026 1027 1028 Description Alloy adaptor - 1 Alloy adaptor - 1 Alloy adaptor straight - 26mm Alloy adaptor straight - 19mm Qty 1* 1* 1* 1* * 2 required
Dimensions
The EWP is a recirculating pump which is ideal for a closed system similar to an automotive cooling system; it is not self-priming.
Page 14
CURRENT (Amps)
4.5
15 litres/min
A high-performance brushless motor, magneticdrive pump. Compact and versatile 12V pump for a range of applications.
Davies, Craig developed the Electric Booster Pump (EBP), designed for use with either an EWP or a conventional mechanical water pump to enhance the heater and LPG systems. This high-performance 15 litre per minute, 12 volt, brushless, magnetically-driven EBP has drawn high acclaim globally for its diversity of applications. These include booster for car heater and LPG systems, solar and marine applications, water-cooled motorcycle, go-kart engines, turbo air/water intercoolers, caravans, motor homes and domestic irrigation.
Technical specications
Motor Operating voltage Maximum current Flow rate Operating temperature Pump design Motor life Pump weight Pump material Burst pressure Fits hose size 12V brushless 9V DC to 15V DC 1.3A 15 L/min (4 US gal/min) @ 10 kPa -40 to 120C (-40 to 248F) Recirculating centrifugal 15,000 hours at 80C (176F) continuous 245 grams (0.54 lb) Nylon 66, 30% glass-lled 250 kPa (36 psi) minimum 19mm () 12.5mm to 19mm ( to ) using stepped adaptors
Kit contents
Part #9001 (Kit) 9012 9020 9511 9516 9510 9901 Part #9002 (Short) 9012 9516 9012 Electric Booster Pump Wiring harness Electric Booster Pump 1 1 1 Description Electric Booster Pump Adaptor - stepped: 19mm, 15mm, 12.5mm Hose clamps Wiring harness Hose Fitting instructions Qty 1 2 4 1 2 1
19.5mm (0.77)
Dimensions
INLET
OUTLET
96.8 mm (3.81)
69mm (2.72)
The EBP is a recirculating pump which is ideal for a closed system similar to an automotive cooling system; it is not self-priming.
Davies, Craig CATALOGUE | 15
Digital Controller
12 volt only
Part #8020
For optimum control of Electric Water Pumps. Suits Davies, Craig EWP80, EWP115, EBP and Thermatic Fans.
The updated Digital Controller now has two specic functions. This unique Digital Controller will manage the operation of the EWP by varying the speed of the pump in response to the coolant temperature and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers ve target temperatures: 75C, 80C, 85C, 90C and 95C (165, 175, 185, 195 and 205F). Generally, higher engine temperature will offer improved fuel efciency and lower engine temperature more power. The Digital Controller will operate the engines electric fan automatically once the engine has reached 3C (5.4F) above the targeted (set) temperature. Another signicant benet is that the Controller allows the EWP to run on after ignition shutdown to eliminate heat soak.
Technical specications
Input voltage Output voltage Maximum current Operating temperatures Targeted (set) temperatures Fan cut-in temperature Controller type Sensor type Time-out Indicator LEDs Weight Dimensions 12V DC to 15V DC 5V to 15V 12A -20 to 60C (-5 to 140F) 75C, 80C, 85C, 90C and 95C (165, 175, 185, 195 and 205F) 3C (5.4F) above the targeted (set) temperature PCB with micro-processor Thermister in housing 2 minutes maximum or set -5C (23F) Temperature, power, EWP , test, fan 90 grams (3.2 oz) 101mm (l) x 95mm (w) x 35mm (d)
AMBIENT
(+3 ABOVE SET POINT, FAN ACTIVATES)
+3
Kit contents
Part # 8120 8920 8411 0410 8510 8512 8414 Description Digital Controller Instructions Wiring harness In-line adaptor Sleeve 3mm rubber adaptors Hose clamp Thermal sensor Assorted hardware Qty 1 1 1 1 2 2 1
Dimensions
Thermatic Fans
THErMATic FANS
A Davies, Craig Thermatic Fan Kit is suitable for both condenser (air-conditioning) and radiator (engine) cooling. An efcient and economical method of automotive cooling, Thermatic Fans are one of the most important cooling components on any vehicle.
All Davies, Craig Thermatic Fan Kits are packaged complete with fan assembly, wiring loom, relay, detailed instructions and mounting hardware for quick and easy installation.
DCSL10
DCSL12
DCSL16
DEPTH CLEARANCE
ENGINE
AIR FLOW DIRECTION
Condenser
Radiator
Questions? Please see frequently-asked questions on our website: www.daviescraig.com.au The continued inux of four-wheel drives, the downsizing of passenger motor vehicles and the global pressure on car manufacturers to reduce engine fuel consumption in mass production vehicles, has led to the rapid growth in the use of electric Thermatic Fans.
An efcient and economical method of automotive cooling, electric fans, along with electric water pumps are ranked as the fastest growing segments within the Cooling Systems Technology groups around the world today. With multiple uses for primary and supplementary add-on cooling, electric fans are one of the most important cooling components on todays vehicles. Thermatic Fans are an excellent solution for vehicles requiring additional air ow. As an add-on cooling source electric fans reduce the workload on the primary cooling fan. Additional air ow increases operating efciencies on applications from small, medium, large, recreational and competition vehicles. As a primary cooling source, Thermatic Fans provide: Economical replacement for failed Original Equipment (OE) fans. 5-10% increase in engine power and fuel saving when replacing the fan clutch and mechanical belt-driven fan assemblies More mounting options - reversible blades for pusher (upstream) or puller (downstream) applications Compatibility with all electric fan controls Coverage for a wide variety of vehicle applications As an add-on source, Thermatic Fans provide: Constant air flow regardless of vehicle speed Increased air conditioning performance due to more constant air flow across the condenser Increased Automatic Transmission Oil Cooler performance due to more constant air flow across the heat transfer core With the conversion from R12 to R134A refrigerant there is a need for additional condenser cooling to ensure the overall improved efficiency of the cooling system is maintained
THErMATic FANS
Specications: see pages 22, 24, 25 and 28 respectively KITS INCLUDE: fan assembly, wiring loom, relay, mounting feet, hardware and instruction sheets. SHORTS INCLUDE: fan assembly (motor, fan blade, shroud and mounting feet). This fan assembly is set up for upstream applications. For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.
Davies, Craig CATALOGUE | 19
Model
DCSL8
KITS INCLUDE: fan assembly, wiring loom, relay, mounting feet, hardware and instruction sheets. SHORTS INCLUDE: fan assembly (motor, fan blade, shroud and mounting feet). This fan assembly is set up for upstream applications. For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.
Dimensions
155 mm 106 mm
Depth clearance
52 mm
186 mm 213 mm
155 mm
31 mm
Pascals
Specications
Maximum current Life Weight 5.0A (12 volt) / 2.4A (24 volt) 1,500 hours at 80C (176F) 0.88kg (1.94lb)
inch water
0.4 100
80 0.3
Components
Part # Description Motor (12 volt) Motor (24 volt) Rotor (reversible, glass-lled nylon) Shroud (glass-lled polypropylene) Hardware (12 volt) Hardware (24 volt) Wiring loom 12V relay (40 amps) 24V relay (30 amps) Mounting feet 0213 0215 0328
60 0.2 40
0.1 20
0534 0604
VOLUME FLOW
Model
DCSL9
KITS INCLUDE: fan assembly, wiring loom, relay, mounting feet, hardware and instruction sheets. SHORTS INCLUDE: fan assembly (motor, fan blade, shroud and mounting feet). This fan assembly is set up for upstream applications. For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.
Dimensions
125 mm
Depth clearance
55 mm 37 mm
THErMATic FANS
242 mm
97 mm
234 mm 249 mm
Pascals
Specications
Maximum current Life Weight 6.5A (12 volt) / 3.25A (24 volt) 1,500 hours at 80C (176F) 0.93kg (2lb)
inch water
0.4 100
80 0.3
Components
Part # Description Motor (12 volt) Motor (24 volt) Rotor (reversible, glass-lled nylon) Shroud (glass-lled polypropylene) Hardware (12 volt) Hardware (24 volt) Wiring loom 12V relay (40 amps) 24V relay (30 amps) Mounting feet 0213 0215 0320
60 0.2 40
0.1 20
0 50 106 100 212 150 318 200 424 250 530 300 Litre/s 635 CFM
0534 0604
VOLUME FLOW
Model
DCSL10
KITS INCLUDE: fan assembly, wiring loom, relay, mounting feet, hardware and instruction sheets. SHORTS INCLUDE: fan assembly (motor, fan blade, shroud and mounting feet). This fan assembly is set up for upstream applications. For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.
Dimensions
145 mm
Depth clearance
64 mm 30 mm
201 mm 290 mm
Pascals
Specications
Maximum current Life Weight 7.0A (12 volt) / 3.5A (24 volt) 1,500 hours at 80C (176F) 1.13kg (2.5lb)
inch water
0.4 100
80 0.3
Components
Part # Description Motor (12 volt) Motor (24 volt) Rotor (reversible, glass-lled nylon) Shroud (glass-lled polypropylene) Hardware (12 volt) Hardware (24 volt) Wiring loom 12V relay (40 amps) 24V relay (30 amps) Mounting feet 0213 0215 0317
60 0.2 40
0.1 20
0604
VOLUME FLOW
22 | Davies, Craig CATALOGUE
Model
DCSLX10
KITS INCLUDE: fan assembly, wiring loom, relay, mounting feet, hardware and instruction sheets. SHORTS INCLUDE: fan assembly (motor, fan blade, shroud and mounting feet). This fan assembly is set up for upstream applications. For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.
THErMATic FANS
Depth clearance
Dimensions
275 mm 121 mm
50 mm 34 mm
278 mm
208 mm
208 mm
Pascals
Specications
Maximum current Life Weight 7.0A (12 volt) / 3.5A (24 volt) 1,500 hours at 80C (176F) 1.13kg (2.5lb)
inch water
0.4 100
80 0.3
Components
Part # Description Motor (12 volt) Motor (24 volt) Rotor (reversible, glass-lled nylon) Shroud (glass-lled nylon) Hardware (12 volt) Hardware (24 volt) Wiring loom 12V relay (40 amps) 24V relay (30 amps) Mounting feet 0213 0215 0317
60 0.2 40
0.1 20
0604
VOLUME FLOW
Davies, Craig CATALOGUE | 23
Model
DCSL12
KITS INCLUDE: fan assembly, wiring loom, relay, mounting feet, hardware and instruction sheets. SHORTS INCLUDE: fan assembly (motor, fan blade, shroud and mounting feet). This fan assembly is set up for upstream applications. For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.
Dimensions
222 mm
Depth clearance
51 mm 36 mm
293 mm
222 mm
148 mm 293 mm
Pascals
Specications
Maximum current Life Weight 9.0A (12 volt) / 4.5A (24 volt) 1,500 hours at 80C (176F) 1.450kg (3.2lb)
160
Components
Part # 0223 0224 0326 0370 0564 Description Motor (12 volt) Motor (24 volt) Rotor (reversible, glass-lled polypropylene) Shroud (glass-lled nylon) Hardware & electrical (12 volt) - includes wiring loom (#0532) & relay (#0533) Hardware & electrical (24 volt) - includes wiring loom (#0532) & relay (#0534) Mounting feet
0.3
80
0.2 40 0.1
0564a 0604
0 0 100 212 200 424 300 635 400 847 500 Litre/s 1060 CFM
VOLUME FLOW
24 | Davies, Craig CATALOGUE
Model
DCSL14
Note: * DC31 (part # 0005) can be used in lieu for 12V (page 27). ** DC31 (part # 0006) can be used in lieu for 24V (page 27).
KITS INCLUDE: fan assembly, wiring loom, relay, mounting feet, hardware and instruction sheets. SHORTS INCLUDE: fan assembly (motor, fan blade, shroud and mounting feet). This fan assembly is set up for upstream applications. For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blades before making a permanent wiring connection and prior to fastening unit to the radiator.
THErMATic FANS
Dimensions
260 mm
Depth clearance
76 mm 40 mm
350 mm 260 mm
185 mm 348 mm
Pascals
Specications
Maximum current Life Weight 11.0A (12 volt) / 5.5A (24 volt) 1,500 hours at 80C (176F) 1.500kg (3.3lb)
160
Components
Part # 0203 0204 0318 0371 0564 Description Motor (12 volt) Motor (24 volt) Rotor 5-blade (reversible, glass-lled polypropylene) Shroud (glass-lled nylon) Hardware & electrical (12 volt) - includes wiring loom (#0532) & relay (#0533) Hardware & electrical (24 volt) - includes wiring loom (#0532) & relay (#0534) Mounting feet
0.3
80
0.2
40
0564a
0.1
0604
0 0 100 212 200 424 300 635 400 847 500 1060 600 Litre/s 1270 CFM
VOLUME FLOW
Davies, Craig CATALOGUE | 25
Model
DCSL14 HP
* HP = High Performance KITS INCLUDE: fan assembly, wiring loom, relay, mounting feet, hardware and instruction sheets. SHORTS INCLUDE: fan assembly (motor, fan blade, shroud and mounting feet). This fan assembly is set up for upstream applications. For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.
Dimensions
Depth clearance
260 mm 94 mm
40 mm 94 mm 40 mm
350 mm 260 mm
185 mm 348 mm
Pascals
Specications
Maximum current Life Weight 13A (12 volt) / 6.5A (24 volt) 1,500 hours at 80C (176F) 2.500kg (5.5lb)
0.8 200
160 0.6
Components
Part # Description Motor (12 volt) Motor (24 volt) Rotor 6-blade (reversible, glass-lled polypropylene) Shroud (glass-lled nylon) Hardware & electrical (12 volt) - includes wiring loom (#0592) & relay (#0533) Hardware & electrical (24 volt) - includes wiring loom (#0532) & relay (#0534) Mounting feet 0220 0221 0327
0371 0568a
0.2 40 0.1 0 0 200 424 400 847 600 1270 800 Litre/s 1695 CFM
0568 0604
VOLUME FLOW
26 | Davies, Craig CATALOGUE
Model
DC31
* Note: DCSL14 (part # 0064) can be used in lieu. KITS INCLUDE: fan assembly, wiring loom, relay, mounting feet, hardware and instruction sheets. SHORTS INCLUDE: fan assembly (motor, fan blade, shroud and mounting feet). This fan assembly is set up for upstream applications. For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.
THErMATic FANS
Dimensions
DOWNSTREAM MOUNTING HOLES: 3 x Holes 4.5mm dia., 120 apart at 340mm P .C.D.
Depth clearance
80 mm
349 mm
UPSTREAM MOUNTING HOLES: 3 x Holes 4.5mm dia., 120 apart at 294mm P .C.D.
Pascals
Specications
Maximum current Life Weight 11A (12 volt) / 5.5A (24 volt) 1,500 hours at 80C (176F) 1.5kg (3.3lb)
inch water
160 0.6
0.5 120
Components
Part # Description Motor (12 volt) Motor (24 volt) Rotor 4-blade (glass-lled polypropylene) Shroud (glass-lled nylon) Hardware & electrical (12 volt) - includes wiring loom (#0532) & relay (#0533) Hardware & electrical (24 volt) - includes wiring loom (0532) & relay (#0534) 0203
0.4 80 0.3
0.2
40
0562a
0.1 0 0 100 212 200 424 300 635 400 847 500 1060 600 Litre/s 1270 CFM
VOLUME FLOW
325 mm
Model
DCSL16
KITS INCLUDE: fan assembly, wiring loom, relay, mounting feet, hardware and instruction sheets. SHORTS INCLUDE: fan assembly (motor, fan blade, shroud and mounting feet). This fan assembly is set up for upstream applications. For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.
Dimensions
328 mm 208 mm
Depth clearance
100 mm 44 mm
400 mm
328 mm
424 mm
Pascals
Specications
Maximum current Life Weight 19A (12 volt) / 9.5A (24 volt) 1,500 hours at 80C (176F) 3.0kg (6.6lb)
160
0.5
120
Components
Part # Description Motor (12 volt) Motor (24 volt) Rotor (reversible, glass-lled polypropylene) Shroud (glass-lled nylon) Hardware & electrical (12 volt) - includes wiring loom (#0592) & relay (#0533) Hardware & electrical (24 volt) - includes wiring loom (0532) & relay (#0534) Mounting feet 0220
0.4 80 0.3
0.2
40
0568
0.1
0604
0 0 200 424 400 847 600 1270 800 1695 1000 Litre/s 2120 CFM
VOLUME FLOW
28 | Davies, Craig CATALOGUE
Thermal Switches
Davies, Craig offer two types of Thermal Switch:
Part #0401 senses the coolant temperature after it passes through the engine block prior to entering the radiator. Part #0402 senses air temperature as it passes through the radiator. Both units: automatically activate the Thermatic Fans at the set tempertature when cooling is required can be adjusted over a wide temperature range by simply turning a knob located on the control switch can also be used to operate the Electric Water Pump when used as an auxiliary pump to the mechanical water pump.
THErMATic FANS
The Electronic Thermal Switch Kit has an adjustable temperature range of 40C to 99C (104 to 210 F). The Electronic Thermal Switch, relay and wiring loom are assembled and pre-connected ready for installation. This switch is operated thermally and also when the air conditioning is in operation. The Electronic Thermal Switch has the advantage over the Mechanical Thermal Switch in that the probe is designed to be placed between the radiator ns and accurately senses the air temperature.
#0402 Electronic Thermal Switch for more efcient Thermatic Fan or EWP control.
To assist your understanding of the correct selection of a Davies, Craig Thermatic Fan, please observe the following:
A/C Condenser cooling only: Additional cooling only: The recommended The Thermatic Fan recommended to cool your vehicles Thermatic Fan to provide an air conditioning condenser extra cooling boost to your replacing an existing original existing belt-driven fan or equipment manufacturers electric fan under extreme (OEM) air conditioning ambient conditions. condenser fan or adding a fan to an existing A/C condenser. Note: If you are removing your mechanical belt-driven fan or Fan Clutch and converting to a total electric Thermatic Fan engine cooling control system and your vehicle is tted with air conditioning, it may be necessary to t Thermatic Fans listed from both the Radiator Cooling Only and Condenser Cooling Only Electric Thermatic Fans from the Model Selection Guide.
Modied engines may require a fan with higher cubic feet/minurte (CFM) cooling than is recommended in the Model Selection Guide.
VEHICLE MAKE & MODEL BMW 316i 318i 318is COUPE 320i 325i CHRYSLER/JEEP JEEP/CHEROKEE 6-cylinder
If you are in doubt, please contact the Davies, Craig technical hotline for exact model application. Phone: +61 3 9369 1234 Fax: +61 3 9369 3456 E-mail: info@daviescraig.com.au
30 | Davies, Craig CATALOGUE
VEHICLE MAKE & MODEL FORD (continued) LASER LASER TX3 TURBO 4WD METEOR MONDEO PROBE TAURUS TELSTAR TX5 V6 92 TELSTAR TX5 TELSTAR NON-TURBO TELSTAR TURBO BRONCO XLT 5.8L COURIER COURIER 2.2L COURIER 2.6L F100 F150 F350 MAVERICK 2D/4D PETROL MAVERICK 2D/4D DIESEL RAIDER
THErMATic FANS
If you are in doubt, please contact the Davies, Craig technical hotline for exact model application. Phone: +61 3 9369 1234 Fax: +61 3 9369 3456 E-mail: info@daviescraig.com.au
Davies, Craig CATALOGUE | 31
VEHICLE MAKE & MODEL HONDA (continued) LEGEND 86-87 LEGEND 88-91 LEGEND 91-96 PRELUDE 83-91 PRELUDE 91HYUNDAI EXCEL LANTRA 1.8 S-COUPE SONATA 2.0-2.4L SONATA 3.0L JAGUAR SOVEREIGN/DAIMLER XJ12,XJ5 73-89 XJ6
If you are in doubt, please contact the Davies, Craig technical hotline for exact model application. Phone: +61 3 9369 1234 Fax: +61 3 9369 3456 E-mail: info@daviescraig.com.au
32 | Davies, Craig CATALOGUE
VEHICLE MAKE & MODEL MITSUBISHI (continued) SCORPION SIGMA 77-85 - all SIGMA TURBO STARION TURBO 82-85 VERADA PAJERO NC 85
THErMATic FANS
If you are in doubt, please contact the Davies, Craig technical hotline for exact model application. Phone: +61 3 9369 1234 Fax: +61 3 9369 3456 E-mail: info@daviescraig.com.au
Davies, Craig CATALOGUE | 33
VEHICLE MAKE & MODEL PEUGEOT (continued) 505 SERIES 600 SERIES 78-82 PROTON 1.5L 951.6L 95ROVER 3500 SERIES 69-87 416i 86-88 825Si 87-88 LAND ROVER DISCOVERY 3.5L LAND ROVER DISCOVERY 3.9L RANGE ROVER -86 RANGE ROVER 86 ON EFI SAAB 900i
If you are in doubt, please contact the Davies, Craig technical hotline for exact model application. Phone: +61 3 9369 1234 Fax: +61 3 9369 3456 E-mail: info@daviescraig.com.au
34 | Davies, Craig CATALOGUE
VEHICLE MAKE & MODEL TOYOTA (continued) L/C FZJ75 TROOP 4.5L PETROL L/C HJ75 TROOP DIESEL 84L/C HDJ60 TURBO DIESEL 87-90 L/C HJ60 DIESEL 87-90 L/C FJ60 PETROL 87-90 L/C HDJ80 TURBO DIESEL 90L/C HZJ80 DIESEL 90L/C FJ80 4.2L PETROL 90-92 L/C FZJ80 4.5L PETROL 92HI-LUX PETROL HI-LUX DIESEL 4 RUNNER DLX PETROL 4 RUNNER DLX DIESEL 4 RUNNER RV6 VOLKSWAGEN GOLF 1.8L 90GOLF 1.8L GTI 90-92 CABRIOLET 1.8L 90GL VENTO 92-95 VR6 GOLF 2.8L 92-95 VOLVO 4 SERIES 4-cylinder 6 SERIES 6-cylinder
THErMATic FANS
* Davies, Craig Thermatic Fan model DC31 (part #0005) can be used in lieu for 12V; DC31 (part #0006) can be used in lieu for 24V (page 27). If you are in doubt, please contact the Davies, Craig technical hotline for exact model application. Phone: +61 3 9369 1234 Fax: +61 3 9369 3456 E-mail: info@daviescraig.com.au
ThermoCap
The ThermoCap radiator cap indicates the coolant temperature with its own in-built calibrated thermometer. This is important information prior to cap removal.
The temperature probe does not need to be in contact with the coolant in order to indicate the correct temperature. ThermoCap is also equipped with a coolant recovery reclamation valve so it is compatible with cooling systems that have an overow reservoir. ThermoCaps can also be used with cooling systems that do not have an overow reservoir.
Spare Parts
Fan Blades
Part # 0328
Size 8
Part # 0320
Size 9
Part # 0302
Description
Size
Part # 0315
Size 10
Part # 0317
Size 10
Size 12
Part # 0306
Size 12
Part # 0319
Size 12
Part # 0326
Size 12
Part # 0309
Size 14
Part # 0318
Size 14
Part # 0327
Size 14 HP
Spare Parts
Part # 0312
Size 14
Part # 0322
Size 16
THErMATic FANS
Spare Parts
Mounting Kits
Part # Part # 0524 0524a Contents Wiring loom & relay kit (12V) Wiring loom & relay kit (24V) Part # 0578 Contents Mounting hardware 0604
Part # 0579
Part # 0422
Contents Fan mounting hardware and electricals for exact part number, please refer to your particular fan contents list pages 20-28 Part # 0422 Contents Twin fan mounting brackets (fans not included) Mounting hardware
Davies, Craig CATALOGUE | 37
Spare Parts
Shrouds
Part # 0372
Description DCSL8
Size 8 fan
Part # 0364
Description DCSL9
Size 9 fan
Part # 0365
Description DCSL10
Size 10 fan
Part # 0375
Description DCSLX10
Size 10 fan
Part # 0363
Size 12 fan
Part # 0370
Description DCSL12
Size 12 fan
Part # 0351
Description DC31
Size 14 fan
Part # 0362
Size 14 fan
Part # 0371
Description DCSL14
Size 14 fan
Part # 0366
Description DCSL16
Size 16 fan
Spare Parts
DC Motors*
Part # 0213 0215 0223 0224 0241 0242 0259 0260 (0211 (0241
Description SSW9511E 12V SSW-9524E 24V SSW9742LW 12V SSW9743LW 24V FM-50 12V, CD-80 12V FM-60B 24V, CD-80 24V SSW9594E 12V SSW9584E 24V SSW 9510E) SSW 959) (sealed type) (sealed type) discontinued discontinued
THErMATic FANS
Description Y-706-21 12V Y-706-23 24V SSW1158R) SSW 1193R 24V) SSW 11117R 27V) discontinued discontinued discontinued
Description SSW-9511E + Spacer 12V SSW-9524E + Spacer 24V SSW9228) SSW 9270 24V) Y-702) ZDB 1501) Y-702 24V) discontinued discontinued discontinued discontinued discontinued
*Note: If your current motor is discontinued, it may be more economical to buy a complete new fan of the same diameter.
Fan Clutches
Fan clutches reduce the drain of engine power and improve the efciency of a vehicles cooling system. Fan clutches are uid coupling devices which provide air ow through the radiator by using the water pump shaft to power a fan blade.
Fan clutch replacement may be required when any of the following problems exist:
engine overheating silicon leaking from fan clutch unit fan spins with little or no resistance (free wheels) greasy build up at thermal spring or where shaft exits rear housing fan clutch vibrates on shaft or will not turn squealing noises from bearing
Note: the fan clutch should be checked for possible replacement when a water pump is installed.
Competitor Cross-Reference
DAYCO PART # 115011 115014 115038 115049 115062 115063 115071 115072 115073 115081 115081 115082 115085 115087 115088 115092 115101 115103 115105 115106 115124 115203 115205 DAVIES, CRAIG PART # 2710 5014 5038 2705 2712 2772 2709 5072 5073 2554 5106 5001 2653 2567 5231 2565 5101 5103 5105 5106 5124 5203 5205 DAYCO PART # 115247 115499 115556 115558 115559 115561 115562 115591 115650 115655 115656 115659 115661 115663 115733 115747 115765 115774 115783 115796 115-050472 115-142419 115-61120 DAVIES, CRAIG PART # 5247 5499 2556 2558 2559 2561 2562 2591 2650 2655 2656 2659 2661 5458 2733 2747 2765 2774 2783 2796 5301 2654 2657 DAYCO PART # 115-G607 No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference No cross reference DAVIES, CRAIG PART # 2652 2557 2691 2731 2799 2803 2804 2805 2806 2807 2808 2809 5053 5102 5104 5107 5253 5265 5302 5408 5428 5459 5468
FAN CLUTcHES
* CW = clockwise | CCW = counter clockwise when looking from the front of the vehicle
Davies, Craig CATALOGUE | 41
Should a vehicle not appear in the Model Selection Guide (pages 44-56), the critical measurements are B, C, D and F.
THERMAL
PART NO. TYPE ROTATION
(looking from front of vehicle)*
OVERALL DIAMETER A 148.6 148.6 148.6 148.6 148.6 148.6 148.6 142.0 148.6 148.6 113.0 137.9 157.5 168.9 168.9 168.9 168.9 168.9 168.9 168.9 168.9 157.5 168.9 168.9 159.8 183.6 183.6 183.6 183.6 183.6 182.9 183.6 183.6 182.9 183.6 183.6 163.8 163.8 163.8 152.5 152.5 167.5 167.5 152.5 167.5 163.1 147.0
PILOT DIAMETER B 16.0/24.4 16.0/25.9 16.0 15.0/19.0 16.0 16.0/32.0 16.0/32.0 16.0/24.1 16.0 16.0 23.9 left hand 16.0/32.0 17.5 16.0/25.7 16.0/24.1 16.0/25.1 16.0/32.5 16.0/25.7 15.0 16.0 16.0/32.0 16.0 16.0 left hand 16.0 16.0/19.1 left hand 16.0 16.0 16.0 16.0/19.1 16.0/19.1 right hand left hand right hand 16.0 16.0 19.1 bush - 23.5 left hand left hand right hand left hand left hand right hand 17.2/31.4
PILOT DEPTH C 19.1 15.2 19.1 12.7 22.4 12.7 22.4 23.6 12.7 17.8 6.1 thread on 19.8 14.0 22.9 21.6 24.6 22.9 22.9 17.3 21.1 12.7 22.4 22.4 thread on 26.2 19.1 thread on 26.2 26.2 26.2 16.0 14.2 thread on thread on thread on 16.0 16.0 16.0 thread on thread on thread on thread on thread on thread on 23.9
FLANGE CIRCLE D 78.0 76.2 65.0 65.0 57.9 76.2 76.2 68.1 57.9 68.6 52.3 32.0mm A/F 76.2 76.2 78.0 68.1 106.2 94.0 78.0 69.3 78.0 76.2 92.2 66.0 32.0mm A/F 65.8 59.2 32.0mm A/F 61.2 65.8 66.0 65.8 58.9 36.0mm A/F 32.0mm A/F 37.0mm A/F 65.5 62.5 65.5 32.0mm A/F 32.0mm A/F 37.0mm A/F 32.0mm A/F 32.0mm A/F 37.0mm A/F 76.8
FAN MOUNT HEIGHT E 49.8 44.7 61.0 44.5 54.6 49.3 53.3 40.6 rear 46.0 51.6 47.2 35.1 59.9 54.4 62.0 59.4 59.4 64.8 62.0 58.2 72.4 59.9 65.8 57.2 36.6 38.9 44.5 26.2 57.2 44.5 38.9 41.1 27.7 44.5 26.2 31.8 45.7 41.4 41.4 22.0 28.5 28.5 22.0 28.5 27.5 45.3
FAN BOLT CIRCLE F 121.9 127.8 124.0 121.9 121.9 133.9 121.9 129.5 121.9 121.9 98.0 124.0 143.5 153.2 135.9 153.2 135.9 135.9 135.9 135.9 135.9 143.5 135.9 153.2 146.8 82.6 76.2 76.2 82.6 82.6 82.6 82.6 82.6 82.6 82.6 82.6 82.6 82.6 82.6 100.0 100.0 82.6 82.6 100.0 82.6 82.6 133.5
FAN MOUNT DIAMETER G 103.9 89.9 111.1 103.9 103.9 119.9 103.9 111.8 103.9 103.9 82.0 111.1 128.8 136.9 103.9 136.9 103.9 103.9 103.9 103.9 103.9 128.8 103.9 136.9 135.0 66.3 59.9 60.2 66.3 66.3 66.5 66.3 66.3 66.5 66.3 66.3 66.3 66.3 66.3 85.5 85.5 66.6 66.6 85.5 66.6 66.6 120.0
OVERALL HEIGHT H 62.2 57.2 79.2 57.9 67.8 61.0 64.3 68.6 58.4 64.0 68.8 51.0 74.9 70.1 77.0 74.4 74.4 80.3 77.0 73.2 87.4 74.4 83.3 74.7 49.0 78.5 84.6 66.3 101.5 91.4 81.3 88.1 67.8 88.1 69.9 75.7 98.8 94.2 94.2 32.0 62.0 70.0 70.0 55.5 70.0 80.5 58.9
BOLT/NUT TYPE (Fan to Clutch) 6mm x 1.0 nut 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 bolt 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 nut 6mm x 1.0 bolt 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 bolt 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 bolt 5/16-18 bolt 5/16-18 bolt 5/16-18 bolt 5/16-18 bolt 5/16-18 bolt 5/16-18 nut 5/16-18 bolt 5/16-18 bolt 5/16-18 nut 5/16-18 bolt 5/16-18 bolt 5/16-18 bolt 5/16-18 bolt 5/16-18 bolt 7mm bolt & nut 5/16-18 bolt 5/16-18 bolt 5/16-18 bolt 6mm x 1.0 bolt 5/16-18 bolt 5/16-18 bolt 6mm x 1.0 bolt
2554 2556 2557 2558 2559 2560 2561 2562 2565 2567 2583 2591 2650 2652 2653 2654 2655 2656 2657 2659 2661 2664 2678 2680 2691 2705 2710 2712 2731 2733 2737 2747 2765 2771 2772 2774 2783 2796 2799 2803 2804 2805 2806 2807 2808 2809 5001
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 3 3 3 3 2 3 2 3 4 4 4 3 3 3 3 3 4 1
CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CCW CW CW CW CW CCW CW CW CW CW CW CW CCW CCW CW CW CCW CW CCW CCW CCW CW CW CW CW CCW CW CW CCW CW
3 2
THERMAL
PART NO. TYPE ROTATION
(looking from front of vehicle)*
OVERALL DIAMETER A 160.0 155.9 154.0 147.0 155.9 136.0 135.7 136.0 136.0 136.0 136.0 135.5 160.0 147.0 147.0 147.0 148.6 147.4 156.0 170.3 135.0 127.5 164.0 164.0 164.0 134.0 165.0 168.9 165.1
PILOT DIAMETER B 16.0 16.0/31.4 32.0 16.0/31.4 16.0/31.4 16.0/taper 16.0/taper 16.0 16.0/taper 16.0/taper 16.0/taper 16.0/48.0 16.0/taper 15.6/31.4 15.6/31.4 13.7/24.8 14.2/24.9 15.6/31.4 15.6/31.4 24.0 32.0 16.0 16.0 16.0 22.0 16.0 16.0 18.0 16.0/taper
PILOT DEPTH C 22.2 19.3 11.5 19.3 19.0 7.0/23.2 9.9/23.2 22.5 12.0/21.5 9.0/23.0 9.2/23.2 9.6/27.0 11.0/21.5 10.9/18.7 10.9/18.7 7.4/16.6 7.4/16.6 10.9/18.7 10.9/18.7 12.0 23.2 18.0 23.5 23.5 23.5 19.0 26.5 9.6 9.9/26.2
FLANGE CIRCLE D 78.5 77.2 78.0 77.2 77.2 75.7 75.7 58.0 76.0 76.6 75.5 76.0 77.5 77.0 77.0 66.0 65.5 77.0 77.2 70.0 73.0 58.0 78.0 78.0 78.0 70.0 76.0 147.0 76.0
FAN MOUNT HEIGHT E 67.0 45.3 62.0 45.3 45.3 67.0 61.1 53.0 51.0 49.0 48.8 51.5 69.3 45.3 45.5 50.0 56.1 45.6 55.0 61.5 55.0 46.7 68.7 67.0 76.0 59.0 68.8 37.3 77.3
FAN BOLT CIRCLE F 136.0 143.0 143.0 133.5 143.0 122.0 122.0 122.0 122.0 122.0 122.0 122.0 136.0 133.5 133.5 133.5 133.9 133.5 142.6 152.5 122.0 112.0 136.0 136.0 136.0 122.0 136.0 153.0 136.0
FAN MOUNT DIAMETER G 104.0 129.4 129.0 120.0 129.4 104.0 104.0 104.0 104.0 104.0 104.0 105.8 104.0 120.0 120.0 120.0 120.0 120.0 129.0 137.1 104.0 89.8 104.0 104.0 104.0 104.0 104.0 136.9 104.0
OVERALL HEIGHT H 81.8 61.7 80.0 64.0 68.4 86.7 80.6 73.0 70.7 68.5 68.5 71.0 83.5 58.4 58.5 63.2 68.8 58.5 72.0 75.4 74.5 70.0 84.0 82.3 91.3 80.2 87.6 54.0 95.1
FAN CLUTcHES
5014 5038 5053 5072 5073 5101 5102 5103 5104 5105 5106 5107 5124 5203 5205 5231 5247 5253 5265 5301 5302 5407 5410 5411 5412 5428 5458 5459 5499
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW CW
8mm 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 nut 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt 6mm x 1.0 2olt
NON-THERMAL
2709 5408 5468 2 2 2 CW CW CW 184.2 120.5 142.8 left hand 16.0/31.7 24.0 thread on 11.5/23.5 18.8 32.0mm 1/f 71.0 68.0 25.9 45.9 37.8 82.6 104.2 100.0 66.3 89.8 83.9 67.1 61.2 62.1 5/16-18 bolt 6mm x 1.0 bolt 6mm x 1.0 bolt
* Call Davies, Craig for more information about Brougham, DeVille, Eldorado, Fleetwood & Seville models.
* Call Davies, Craig for more information about Camaro, Caprice, Chevelle, Corvette, El Camino, Impala, Malibu, Monte Carlo, Monza, Nova and some GMC light truck models.
YEAR
ENGINE TYPE V8 V8 V8 V8 L4 L4 L4 L4
ENGINE CAPACITY 4.5 (273) 5.2 (318) 5.6 (340) 5.9 (360) 2.0 3.4 3.0 2.0
APPLICATION DESCRIPTION
84-02
FAN CLUTcHES
ENGINE TYPE V8 V8 L6 V8 V8 V8 V8 L6 V8 V8 L6 L6 V8 L6 L6 L6 L6 L6 L6 L6 V8 L6 V8 L6 V8 V8 V8 L6 L6 V8 V8 L6 L6 V8 V8 L6 L6 V8 V8 L6 L6 V8 V8 L6 L6 L6 V8 V8 L6 L6 L6 L6 L6 L6 L6 L6 L6 L6 L6 L6 L6 L6
ENGINE CAPACITY 4.9 (302) 5.8 (351) 4.1 (250) 4.9 (302) 5.8 (351) 4.9 5.8 4.1 4.9 5.8 4.1 (250) 4.1 (250) 4.9 4.1 (250) 4.1 (250) 3.9 3.9 3.9 3.9 3.9 5.0 4.0 5.0 4.0 5.0 5.0 5.0 3.3 (200) 4.1 (250) 4.9 (302) 5.8 (351) 3.3 (200) 4.1 (250) 4.9 (302) 5.8 (351) 3.3 4.1 4.9 5.8 3.3 4.1 4.9 5.8 3.3 4.1 4.1 4.9 5.8 3.3 4.1 4.1 3.2 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
APPLICATION DESCRIPTION ZF ZF ZG ZG ZG ZH ZH ZJ ZJ ZJ ZK ZK Injected ZK ZL ZL Injected NA NA II NA 10-blade fan NA II 10-blade fan NC NC NC II NC II NF NF NF II NL XA XA XA XA XB XB XB XB XC Air conditioning XC Air conditioning XC XC XD Air conditioning XD Air conditioning XD XD XE Air conditioning XE Air conditioning XE Injected, air conditioning XE XE XF Air conditioning XF Air conditioning XF Injected, air conditioning EA EA 5-blade EA 10-blade EA Multipoint 5-blade EA Multipoint 10-blade EA II 5-blade EA II 10-blade EA II Multipoint 5-blade EA II Multipoint 10-blade EB 5-blade EB 10-blade
DAVIES, CRAIG PART # 2710 2710 2712 2710 2710 2710 2710 2712 2710 2710 2712 2712 2710 2712 2712 2709 2709 2772 2772 2772 2774 2772 2774 2772 2774 2774 2774 2712 2712 2710 2710 2712 2712 2710 2710 2712 2712 2710 2710 2712 2712 2710 2710 2712 2712 2712 2710 2710 2712 2712 2712 2709 2709 2772 2709 2772 2709 2772 2709 2772 2709 2772
ENGINE TYPE V8 L6 V8 L6 V8 L6 L6 L6 V8 V8 V8 V8 L6 L6 L6 V8 V8 V8 V8 V8 L6 V8 L6 V8 V8 L6 L6 L6 L6 L6 L6 V8 L6 L6 V8 L6 V8 V8 L6 L6 L6 L6 V8 V8 V8 L4 L4 L4 L4
ENGINE CAPACITY 5.0 4.0 5.0 4.0 5.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 3.3/4.1 4.0 4.0 5.0 5.8 (351) 5.8 (351) 5.8 (351) 5.8 (351) 4.1 5.8 (351) 4.1 4.9 5.8 (351) 4.1 3.9 3.9 3.9 3.9 3.9 5.0 4.0 4.0 5.0 4.0 5.0 5.0 4.2 4.2 4.2 4.2 4.7 (289) 4.9 (302) 5.8 (351) 2.6 1.6 1.8 2.0
APPLICATION DESCRIPTION EB EB II EB II ED ED XG 5-blade XG 10-blade EF EF EF II EL XH II X Flow XC, XD, XE, XF, OHC XG Longreach 5-blade fan OHC XG Longreach 10-blade fan XH II
DAVIES, CRAIG PART # 2774 2772 2774 2772 2774 2709 2772 2772 2774 2774 2774 2774 2712 2709 2772 2774 2710 2710 2710 2710
FC FC FD FD FD FE DA 5-blade DA 10-blade DA II 5-blade DA II 10-blade DC DC DC DF DF DF II DF II DL -10/91 10/91-2/94 TB42S 2/94- TB42E Diesel
2712 2710 2712 2710 2710 2712 2709 2772 2709 2772 2772 2774 2772 2772 2774 2772 2774 2774 5038 5072 5073 5205 2710 2710
FAN CLUTcHES
Inc. Mach 1 G6 F8 F8 F8
ENGINE TYPE V8 V8 V8 V8 L6 V8 V8 V8 V8 L6 V8 L6 L6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 L6 L6 V8 V8 L4 L6 L6 V8 V8 L4 L6 L6 V8 V8 L6 L6 V8 V8 L6 L6 V8 V8 V8 V8 V8 V8 V8 V8 V8
ENGINE CAPACITY 5.0 5.0 4.9 4.9 3.0 5.0 5.0 (307) 5.0 (308) 5.0 (308) 3.3 5.0 3.0 3.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.7 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.8 3.3 4.2 5.0 1.9 2.8 3.3 4.2 5.0 1.9 2.8 3.3 4.2 5.0 3.3 3.3 5.0 4.9 3.0 3.0 4.9 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
DAVIES, CRAIG PART # 2705 2705 2705 2705 5001 2705 2705 2705 2705 2705 2705 5001 5001 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 5001 5001 2705 2705 2705 2705 2705 2705 2705 2705 2705
FAN CLUTcHES
ENGINE TYPE V8 V8 V8 L4 L4 L4 L4 L4 L4 L4 L4 L4 V6 L4 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 L4 L4 L4 L6 L6 V8 V8 L4 L6 L6 V8 V8 L6 L6 V8 L6 L6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8
ENGINE CAPACITY 5.0 (308) 4.2 (253) 5.0 (308) 2.0 1.8 2.2 2.2 2.3 2.0 2.6 2.8 2.3 3.2 2.6 4.2 (253) 5.0 (308) 5.7 (350) 5.0 (308) 5.0 (308) 5.0 (308) 5.0 (308) 5.0 (308) 5.0 (308) 5.0 (308) 5.0 (308) 5.0 (308) 5.0 (308) 1.9 1.9 1.9 2.8 3.3 4.2 5.0 1.9 2.8 3.3 4.2 5.0 2.8 3.3 5.0 3.3 2.3 & 3.3 4.2 & 5.1 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.7 5.0 5.7 5.0 5.7
APPLICATION DESCRIPTION HX HZ HZ KBD26/41, C190 KB26, KB42, KB47 KBD27/43, UBS16, inc. Turbo C223 Diesel KB28/KB49, 4ZDI KB28 Injected HK, HM, 4ZEI, front mount fan Turbo Diesel HK, HM, HP , HW, 4JBI TF, 4ZDI HW, 6VDI TF, 4ZEI HQ HQ HQ HJ HX HZ WB VQ VQ II VR VS VS II VS III LX UC LH LH LH LH LH LX LX LX LX LX UC UC VG, VP , VR, VS, VU, 5000EFI
DAVIES, CRAIG PART # 2705 2705 2705 2561 or 5302 2561 or 5302 2561 or 5302 2561 or 5302 2567 2561 or 5302 2567 5302 or 2561 2567 5458 5428 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705
VR VS VS II VR VS VS II VT VL VN VS II VS II VS III VS III VP VR
2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705 2705
FAN CLUTcHES
ENGINE TYPE L4 L4 L4 V6 L4 L4 L4 V6 L4
ENGINE CAPACITY 2.0 2.4 2.5 3.0 2.6 2.5 2.6 3.0 2.8
APPLICATION DESCRIPTION SF, SG, SH, SJ, 4G63 SF,SG, SH, SJ, 4G64 SF, SG, SH, SJ. 4D56 WA, 6G72 Astron ME, MF, MG, MH, MJ, 4G54 Diesel ME, MF, MG, MH, MJ, 4D56 ME, MF, MG, MH, MJ MH, MJ, MK inc EFI 6G72 Diesel MK, 4M40
DAVIES, CRAIG PART # 2654 2559 2654 2654 2559 5301 5407 2654 5459
FAN CLUTcHES
ENGINE TYPE L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 V8 V8 V8 V8 V8
ENGINE CAPACITY 2.0 2.0 2.2 2.3 2.4 1.4 1.5 2.4 2.0 2.4 6.6 (400) 5.7 (350) 7.5 (455) 5 (305) 6.6 (403)
APPLICATION DESCRIPTION E23, Z20 04/83-01/85 E23, Z20 01/85-09/86 Diesel E22, SD22 Diesel E23, SD23 E24, Z24 C20, A14 C20, A15 C22, Z24 06/86-10/87 C22, Z20 C22, Z24 10/87-04/93
DAVIES, CRAIG PART # 5203 5001 5203 5203 5247 5408 5408 5001 5247 5247 2705 2705 2747 2705 2705
80-84
V8 V6 L4 L4 L4 V6 L4 L4 L4 L4 L4 V6 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L6 L6 L6 L6 L4 L4 L4 L4 L4 L4 L4 L4 L4 L6 L6
3.5 2.5 1.3 1.6 2.0 2.5 2.0 2.4 2.2 2.4 2.8 3.0 2.2 2.4 2.4 2.4 2.8 2.4 1.6 2.0 2.0 2.0 2.4 2.4 2.0 2.2 2.4 3.4 3.4 4.0 4.2 1.6 1.8 1.6 1.6 2.0 2.2 2.0 2.4 2.4 2.6 2.8 RB11, 18R RU11, RU13 non-A/C 20R RB20, 22R Diesel BB10, BB20, BB21, 3B V47, V48, V50 Diesel 1HZ 2TC 3TC AE71, 4AC Twin Cam GTS, 4AGEC RT104, RT118, RT132, 18R 20R RT133, no air conditioning 21R RT142, no air conditioning 22RE-C RT142, no air conditioning 4M, 4ME MX62, 5M, 5M-E with air conditioning, 3B Diesel HB30, HB36V, 2H RA60, non-A/C 21RC RA63, 18R RA65, with A/C 22RE 22R YN60, YN63, 3YC Diesel LN60, LN61, 2L YN60, YN63, 4Y YN63, RN130, 22R VZN130, 3VZ-E Diesel LD10, L Diesel LD20, LD21, 2L 05/84-08/87 Diesel LD20, LD21, 2L 09/87-02/92 RJ70, 22R RJ70, 3L RJ70, 22R with air conditioning no air conditioning with air conditioning Diesel LN61, LN130, 3L
2803 2680 2583 2583 2680 2680 5103 5101 5103 5106 5124 2657 5101 5101 5101 5106 5124 5106 2554 5106 5103 5106 2554 2554 5103 5106 5106 5105 5105 5499 5499 2556 2556 2556 2556 5103 2554 5106 5106 5106 2653 2653
ENGINE TYPE L6 L6 L6 L6 L6 L4 L4 L4 L6 L6 L6 L6 L6 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4
ENGINE CAPACITY 2.8 3.0 2.6 2.8 3.4 1.8 2.0 2.2 3.0 3.4 3.4 3.4 3.7 2.4 2.8 3.0 2.0 2.2 1.8 2.0 2.4 2.2 2.4 2.8 3.0 2.4 1.6 2.0 2.2 2.2 1.6 2.0 2.4 2.4 1.8 2.2 2.4 2.8 2.0 2.7 3.0 3.0
APPLICATION DESCRIPTION MX73, 5M-GEU 7M-GEU MS112, MS123, 4M, 5M, 5ME MS123, 5M-GEU V47, V48, V50, with air conditioning 3B YH60, YH81, 2Y YU62, YU80, 3Y YH81, 4Y Diesel BU60, BU61, BU77, BU81, 11B Diesel BU62, BU64, BU77, BU82, BU85, BU86, 13B Turbo Diesel BU90, BU95, 13B BU93, BU98, 13B Diesel BU88, BU91, 14B Diesel LY60, LY61, LH80, 2L Diesel LY51, LY61, 3L Diesel 5L RH22, RH32, RH42, 18R Diesel LH11, LH20, LH30, LH50, LH51, LH60, LH70, L YH50, YH51, 2YC YH53, YH61, 3YC Diesel LH60, LH61, LH70, LH71, 2L YH63, YH71, YH73, 4Y LH113R, Carb/EFI, 2RZ, 2RZ-E Diesel LH113R, 3L Diesel LH113R, 5L RN33, RN35, RN43, RN45, 12R RN31, RN36, RN39, 18R Diesel LN30, LN36, LN40, LN46, L Diesel LN50, LN55, LN65, L YN55, YN56, 1YC YN56, YN60, YN65, YN81, YN86, YN100, YN105, YN107, YN130G, 3Y Diesel LN41, LN51, LN56, LN60, LN61, LN65, 2L Diesel LN80, LN85, LN130, 2L YN51, YN56, YN57, YN58, YN80, RN85, 2Y YN65, YN67, YN85, 4Y RN85, RN90, RN105, RN110, w/- A/C 22R Diesel LN81, LN86, LN100, LN106, LN111, LN107, LN109, LN131V, 3L RZN EFI, 1RZ RZN149/169, 3RZ-FE Diesel 5L Diesel 5L, KZN165, 1KZTE
DAVIES, CRAIG PART # 2653 2653 2653 2653 5105 5103 5103 5103 5105 5105 5105 5105 5105 5101 5124 5124 5103 5101 5103 5103 5101 5103 5107 5124 5124 5107 5103 5103 5105 5101 5103 5103 5101 5124 5103 5103 2554 5124 5107 5410 5124 5412
FAN CLUTcHES
OiL COOLErS
HYDRA-COOL plate and n style The Hydra-Cool transmission oil cooler is an effective and economical way to keep the transmission at its optimum operating temperature. High-efciency turbulators in each tube direct the uid for superior heat transfer. Hydra-Cools unique plate and n design allows for effective cooling, yet requires 33% less space. The Hydra-Cools compact design is perfect for applications where available mounting space is limited. All Davies, Craig transmission oil coolers are 100% pressure tested to ensure the reliability and durability of the product. Both Ultra-Cool and Hydra-Cool come complete with the necessary accessories and instructions for quick and easy installation.
* All coolers come complete with a mounting kit, exible hose and hose clamps.
Davies, Craig CATALOGUE | 57
Ultra-Cool
Note: Ultra-Cool Transmission Coolers are only recommended for vehicles manufactured prior to 1990
Features
Ultrasonically soldered for reliability 100% pressure tested at 150psi for quality assurance High-efficiency turbulators in every tube for maximum heat dissipation 3/8 push-on fittings for quick and easy installation.
Specications
OVERALL PART # THICKNESS LENGTH WIDTH
20 20 20
Accessories
Quick Fit Kit
When replacing a Transmission Oil Cooler or Power Steering Cooler, you will need to t new nylon ties. Use only the Davies, Craig Quick Fit Kit - Part #0579
Contents
Part # 0579 Description Quick Fit Kit nylon ties x4 Qty 1
Part #0579 - Quick Fit Kit
Hydra-Cool
Features
100% pressure tested at 150psi for quality assurance 33% more efficient than a comparable tube and fin design Pre-drilled mounting plates for easy installation Six sizes available to fit a wider range of applications Internal turbulation for efficient heat transfer 3/8 or 5/16 push-on fittings for quick and easy installation.
Qty 1 1 1 as reqd 1 1
HEAT TRANSFER RATE (BTU/HR)
Specications
PART # THICKNESS LENGTH
20 20 20 20 20
3/8" push on 3/8" push on 3/8" push on 3/8" push on Universal 5/16
12 17 21 30 17
Features
100% pressure tested at 150psi for quality assurance 33% more efficient than a comparable tube and fin design Pre-drilled mounting plates for easy installation Two sizes available to fit a wider range of applications Internal turbulation for efficient heat transfer 3/8 or 5/16 push-on fittings for quick and easy installation.
OiL COOLErS
Specications
OVERALL PART # THICKNESS LENGTH WIDTH CORE LENGTH WIDTH FITTING SIZE
CORE PART #
# of PLATES
680 *
20
280 281
181 180
280 281
151 152
0857
17 17
11,000 13,394
Davies, Craig CATALOGUE | 59
686 ** 20
Part #691
Features
100% pressure tested at 150psi for quality assurance 33% more efficient than a comparable tube and fin design Pre-drilled mounting plates for easy installation Internal turbulation for efficient heat transfer 3/8 push-on fittings for quick and easy installation.
Qty 1 1 4 1 1 2
See below for transmission oil cooler specications, and page 23 for 10 Slimline 12 volt fan specications (part # 0047). Refer opposite page for model selection guide. When replacing a Transmission Oil Cooler or Power Steering Cooler, you will need to t new nylon ties. Use only the Davies, Craig Quick Fit Kit - Part #0579 (refer Accessories, page 58). 0047 0579
3/8 hose Hose clamps Detailed tting instructions DCSLX10 10 Slimline Fan Kit (12V) Quick Fit Kits nylon ties x4
Specications
OVERALL PART # THICKNESS LENGTH WIDTH CORE LENGTH WIDTH FITTING SIZE CORE PART # # of PLATES HEAT TRANSFER RATE (BTU/HR)
679 / 691
20
281
300
281
265
30
15,710
Part #679
Features
100% pressure tested at 150psi for quality assurance 33% more efficient than a comparable tube and fin design Pre-drilled mounting plates for easy installation Internal turbulation for efficient heat transfer 3/8 push-on fittings for quick and easy installation.
Kit contents
Part # Description Hydra-Cool 30-plate transmission oil cooler
Qty 1 1 4 1 1
See above for transmission oil cooler specications. Refer opposite page for model selection guide. If you wish to add a 24 volt fan, refer to page 23 for 10 Slimline 24 volt fan specications (part # 0048). When replacing a Transmission Oil Cooler, you will need to t new nylon ties. Use only the Davies, Craig Quick Fit Kit Part #0579 (refer Accessories, page 58).
Page 60
3/8 hose Hose clamps Detailed tting instructions 0579 Quick Fit Kit nylon ties x 4
Part #1009
Kit contents
Part # Description Cooler core 3/8 hose Hose clamps Detailed tting instructions 0579 Quick Fit Kit nylon ties x 4 Qty 1 1 4 1 1
HEAT TRANSFER RATE (BTU/HR)
Specications
OVERALL PART # THICKNESS LENGTH WIDTH CORE LENGTH
WIDTH
APPLICATION
1009
19
226
64
148
64
4,000
OiL COOLErS
* Note: Hydra-Cool Transmission Coolers are suitable for all vehicles Ultra-Cool Transmission Coolers are only recommended for vehicles manufactured prior to 1990
TPMS
1012 1013
Sensor Booster
A Sensor Booster unit may be required if your vehicle has a wheelbase in excess of eight metres (26.25 feet). The Sensor Booster is mounted at the rear of the tow vehicle to relay the sensor signals from rear/trailer wheels. Theres no need to t a second Booster should the vehicles rear wheels exceed 16 metres (52.5 feet) as the Boosters transmitting radius is around 18 metres (59 feet). Part # 1020 Description Tyre Pressure Monitor Sensor Booster
JAPAN
NICOLE RACING JAPAN
Parc dactivities designes Avenue de Dublin BP 706 83030 Toulon, Cedex 9 France T: +33 04 94 88 57 88 F: +33 04 94 32 80 01 E: info@oreca.fr W: www.oreca.fr
Nicole Building, 2-5-7 Todde Kawasaki-Shi Kanagawa-Ken 212-0005 Japan T: +044 511 2000 F: +044 541 3036 E: racing@nicole.co.jp W: www.nicole.racing.jp
510 Mt Wellington Hwy (PO Box 3201) Mt Wellington, Auckland NZ T: +64 9 574 1122 F: +64 9 573 0961 E: webenquiries@repco.co.nz W: www.repco.co.nz
SEGEDINS AUTO PARTS
UNITED KINGDOM
DEMON TWEEKS DIRECT
GERMANY
ISA-RACING GmbH
MIDDLE EAST
GULFSPORT RACING
August-Horch-Strae 11 Kottenheim D-56736 Germany T: +49 2651 96250 F: +49 2651 962510 E: info@isa-racing.de W: www.isa-racing.de
SANdTLEr GmbH
Unit 8, Industrial Area 4, Street 29, Al Quoz Dubai UAE T/F: +971 4 341 5438 W: www.gulf-sport.com
381-385 Dominion Road, Mt Eden, Auckland NZ T: +64 9 638 6439 F: +64 9 630 0736 E: parts@segedins.com W: www.segedins.com
75 Ash Road South, Wrexham Industrial Centre, Wrexham LL 13 9UG UK T: +44 01978 664 466 F: +44 01978 664 467 E: sales@demon-tweeks.co.uk W: www.demon-tweeks.co.uk
MAW SOLUTIONS
SOUTH AFRICA
UNIVERSAL COOLERS
Five Oaks, Sandy Lane, Heneld West Sussex BN5 9UX UK T: +44 01273 493 343 F: +44 01273 495 074 E: info@mawsolutions.com W: www.mawsolutions.com
THINK AUTOMOTIVE
NEW ZEALAND
BNT AUTOMOTIVE
Heidestrae 85 B 44866 Bochum Germany T: +49 2327 986710 F: +49 2327 986767 E: info@sandtler.de W: www.sandtler.de
21-27 Omega Street, Albany (Private Bag 93529) Takapuna, Auckland NZ T: +64 9 414 3206 F: +64 9 414 3291 E: daviescraigsales@bntnz.co.nz W: www.bntnz.co.nz
CAPITAL INSTRUMENTS
65 Erasmus Avenue Raslouw 0149 South Africa (PO Box 553 Roslouw 0109 South Africa) T: +27 0 12 666 8725 F: +27 0 12 666 8729 E: hendrik@hot4cold.co.za W: www.hot4cold.co.za
292 Worton Road, Isleworth Middlesex TW7 6EL UK T: +44 02085 681 172 F: +44 02088 475 338 E: info@thinkauto.com W: www.thinkauto.com
UNITED STATES
HOERR RACING PRODUCTS
SWEDEN
DALHEMS BILDELAR
ITALY
TECHNAUTO
Viale Forlanini 23 20134 Milano Italy T: +39 02 738 8773 F: +39 02 7109 2469 E: info@tecnautosrl.com W: www.tecnauto.it
350 Church Street, Penrose, Auckland NZ T: +64 9 582 0085 F: +64 9 589 1579 E: iwaters@capital instruments.co.nz W: www.capitalinstruments.co.nz
PERFORMANCE PARTS
Dalhems Dalhem 31058 Vessigebro T: +46 0 3462 0735 F: +46 0 3462 0373 E: bildelar@dalhems.com W: www.dalhems.com
TS MOTORSPORT
4802 Competition Lane Peoria IL 61615 USA T: +1 309 691 8789 F: +1 309 691 8796 E: info@hrpworld.com W: www.hrpworld.com
TUrN 14 DiSTribUTiON
7 Tironui Road, Pakura, Auckland NZ T: +64 9 299 6890 F: +64 9 298 3099 E: sales@v8parts.co.nz
Gjestnangsgatan 1, Astorp 26533 Sweden T: +46 0 4225 5505 F: +46 0 4255 7470 E: info@tsmotor.com W: www.tsmotor.com
209 Commerce Drive Montgomeryville PA 18936 USA T: +1 267 468 0350 F: +1 267 468 0363 E: general@turn14.com W: www.turn14.com
WARRANTY STATEMENTS
THERMATIC FANS & THERMAL SWITCHES
We hereby guarantee that for a period of two years or 1,500 hours (whichever is the lesser) from the date of purchase we shall carry out free of cost any repairs that are reasonably necessary to correct any fault in the operation of your Thermatic fan provided that such a fault is directly attributable to a defect in the workmanship or the materials used in the manufacture of the Thermatic fan. Labour and consequential costs excluded. DAVIES, CRAIG PTY LTD
Designed and manufactured in Australia Patents: EU#1133624: EWP - France - Italy - Germany - Netherlands - Greece - Spain - Ireland - Sweden - United Kingdom India: EWP Patent no. 6425353: Vehicle Engine Coolant Pump - USA Design Patent no. D439637: Adaptor Sleeve - USA Australian Patent 756456: Vehicle Engine Coolant Pump Australian trademark 747610: Thermatic Australian trademark 783443: EWP EBP
Davies, Craig CATALOGUE | 63
TYREGUARD 400 TPMS We hereby guarantee that for a period of one year from the date of purchase we shall carry out free of cost any repairs that are reasonably necessary to correct any fault in the operation of your TPMS provided that such a fault is directly attributable to a defect in the workmanship or the materials used in the manufacture of the TPMS. Labour and consequential costs excluded. DAVIES, CRAIG PTY LTD
Registered Ofce: 77 Taras Ave, Altona North VIC 3025 Australia PO Box 363, Altona North VIC 3025 Australia Ph: +61 3 9369 1234 Fax: + 61 3 9369 3456 Email: info@daviescraig.com.au www.daviescraig.com.au For overseas distributor details, please see the listing on the inside back cover.