You are on page 1of 16

SCALA Air Containment Specification

Bench mounted fume cupboard EN 14175-3/6


fume cupboard with extract air mainfold (PP) (for f/c with FAZ or AC pipe controller) dimensions (mm) (width x depth x height) connection ventilation wall distance connection to center of AFFL spigot (mm) (mm) (mm) f/c with extract air controller (PP) directly mounted (for f/c with standard AC) flange connection (mm) ventilation connection AFFL (mm) wall distance to center of spigot (mm) min value acc. to EN 14175-3
/3

as per: 22.10.2012

pressure drop

variable air volumes AC 14175

AC
( damper

axis

axis

(m/h)

FAZ (Pa)

open for 70 )

(Pa)

closed (m/h)

/1

min. EN open (m/h)

bench- mounted fume cupboard 1200 x 900 x 2700 1500 x 900 x 2700 1800 x 900 x 2700 2100 x 900 x 2700 low ceiling bench- mounted fume cupboard 1200 x 900 x 2400 1500 x 900 x 2400 1800 x 900 x 2400 2100 x 900 x 2400
/1 /2 /3

250 250 250 250

2720 2720 2720 2720

190 190 190 190

central central central central

250 250 250 250

2950 2950 2950 2950

190 190 190 190

central central central central

480 600 720 840

50 70 90 120

120 120 120 180

200 200 200 200

480 600 720 840

250 250 250 250

2420 2420 2420 2420

190 190 190 190

central central central central

250 250 250 250

2650 2650 2650 2650

190 190 190 190

central central central central

480 600 720 840

50 70 90 140

120 120 120 200

200 200 200 200

480 600 720 840

Values at closed sashes and horizontal sashes Control systems to control the air exchange rates toward the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measurement

The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation plant. In consideration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %. All air volumes given are related to an opening height of the sash of 500 mm as well as to the tracer gas peak values recommended by BG Chemie! In case exhaust air control systems + control components are provided by the client, air volumes may be deviating. Therefore operational limits shall be coordinated with WALDNER Laboreinrichtungen in advance. The minimum values for fume cupboards with a variable air volume depend on the airflow controller and on the ventilation plant and shall be clarified with WALDNER Laboreinrichtungen on an individual basis. A maximum pre-pressure of 600 Pa should not be exceeded Threshold value FAZ: Set value AC: the respective minimum EN value, provided no other project-related air volume is given variable lower set value at 200 m/h, upper set value is the respective minimum EN value, provided no other project-related air volume is given Abbreviations: AC airflow controller AF particulate filter open sash 500 mm open FAZ function display

KF mm OKFFB Pa

carbon filter, Camfil cartridge filter millimeter above final floor (AFFL) Pascal

PP polypropylene VF EU 4 filter closed sash and horizontal sash closed S + L acid and base cabinet SF particles filter Eu 13 UBench-mounted fume cupboards and modules

SCALA Air Containment Specification

Bench- mounted fume cupboards with side installation EN 14175-3/6


fume cupboard with extract air mainfold (PP) /2 (for f/c with FAZ or AC pipe controller) dimensions (mm) (Width x Depth x Height) connection (mm) Bench- mounted fume cupboards with side installation 1200 x 900 x 2700 1500 x 900 x 2700 1800 x 900 x 2700 2100 x 900 x 2700 2400 x 900 x 2700 low ceiling bench- mounted fume cupboards with side installation 1200 x 900 x 2400 1500 x 900 x 2400 1800 x 900 x 2400 250 250 250 2420 2420 2420 190 190 190 central central central 250 250 250 2650 2650 2650 190 190 190 central central central 420 530 630 50 50 70 120 120 150 200 200 200 250 250 250 250 250 2720 2720 2720 2720 2720 190 190 190 190 190 central central central central central 250 250 250 250 250 2950 2950 2950 2950 2950 190 190 190 190 190 central central central central central 420 530 630 740 840 50 50 70 95 120 120 120 150 175 190 200 200 200 200 200 ventilation wall distance connection to center of AFFL spigot (mm) (mm) f/c with extract air controller (PP) directly mounted (for f/c with standard AC) flange connection (mm) ventilation wall distance connection to center of AFFL spigot (mm) (mm) min value/3 acc. to EN 14175-3 pressure drop

as per: 22.10.2012 variable air volumes AC 14175

AC
( damper

min. EN closed (m/h)


/1

axis

axis

(m/h)

FAZ (Pa)

open for 70 )

(Pa)

open (m/h)

420 530 630 740 840

420 530 630

/1 /2 /3

Values at closed sashes and horizontal sashes Control systems to control the air exchange rates toward the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measuremen

The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation plant. In consideration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %. All air volumes given are related to an opening height of the sash of 500 mm as well as to the tracer gas peak values recommended by BG Chemie! In case exhaust air control systems + control components are provided by the client, air volumes may be deviating. Therefore operational limits shall be coordinated with WALDNER Laboreinrichtungen in advance. The minimum values for fume cupboards with a variable air volume depend on the airflow controller and on the ventilation plant and shall be clarified with WALDNER Laboreinrichtungen on an individual basis. A maximum pre-pressure of 600 Pa should not be exceeded, however. Threshold value FAZ: Set value AC: Abbreviations: AC AF open FAZ the respective minimum EN value, provided no other project-related air volume is given variable lower set value at 200 m/h, upper set value is the respective minimum EN value, provided no other project-related air volume is given

airflow controller particulate filter sash 500 mm open function display

KF mm OKFFB Pa

carbon filter, Camfil cartridge filter millimeter above final floor (AFFL) Pascal

PP polypropylene S + L acid and base cabinet SF particles filter Eu 13 bench-mounted fume cupboards and modules UB

VF EU 4 filter closed sash and horizontal sash closed

SCALA Air Containment Specification

Walk-in fume cupboards with side installation EN 14175-3/6


fume cupboard with extract air mainfold (PP) /2 (for f/c with FAZ or AC pipe controller) dimensions (mm) (Width x Depth x Height) connection (mm) Walk-in fume cupboards with side installation 1200 x 900 x 2700 1500 x 900 x 2700 1800 x 900 x 2700 2100 x 900 x 2700 2400 x 900 x 2700 Low level fume cupboards with side installation 1200 x 900 x 2400 1500 x 900 x 2400 1800 x 900 x 2400 2100 x 900 x 2700 2400 x 900 x 2700
/1 /2 /3

as per: 22.10.2012 min value/3/8 acc. to EN 14175-3 pressure drop variable air volumes AC 14175

f/c with extract air controller (PP) directly mounted (for f/c with standard AC) flange connection (mm) ventilation connection AFFL (mm) wall distance to center of spigot (mm)

ventilation wall distance connection to center of AFFL spigot (mm) (mm)

AC
( damper

axis

axis

(m/h)

FAZ (Pa)

open for 70 )

(Pa)

min. EN open closed /1 (m/h) (m/h)

250 250 250 250 / 315/8 250 / 315


/8

2720 2720 2720 2720 / 2830/8 2720 / 2830/8

190 190 190 190 / 220/8 190 / 220/8

central central central central central

250 250 250 250 / 315 250 / 315


/8

2950 2950 2950 2950 / 3070/8 2950 / 3070/8

190 190 190 190 / 220/8 190 / 220/8

central central central central central

480 600 720 840 960

50 50 70 95 120

120 120 150 175 190

200 200 200 300 300

480 600 720 840 960

/8

250 250 250 250 / 315/8 250 / 315


/8

2720 2720 2720 2720 / 2830/8 2720 / 2830/8

190 190 190 190 / 220/8 190 / 220/8

central central central central central

250 250 250 250 / 315 250 / 315


/8

2950 2950 2950 2950 / 3070/8 2950 / 3070/8

190 190 190 190 / 220/8 190 / 220/8

central central central central central

480 600 720 840 960

50 50 70 95 120

120 120 150 175 190

200 200 200 300 300

480 600 720 840 960

/8

Values at closed sashes and horizontal sashes. Control systems to control the air exchange rates toward the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measurement.

The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation plant. In consideration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %.
/8

According to the advice of the type test laboratories workshop, walk-in fume cupboards should be operated with 600 m/h of running meter of fume cupboard.

All air volumes given are related to an opening height of the sash of 500 mm as well as to the tracer gas peak values recommended by BG Chemie! In case exhaust air control systems + control components are provided by the client, air volumes may be deviating. Therefore operational limits shall be coordinated with WALDNER Laboreinrichtungen in advance. The minimum values for fume cupboards with a variable air volume depend on the airflow controller and on the ventilation plant and shall be clarified with WALDNER Laboreinrichtungen on an individual basis. A maximum pre-pressure of 600 Pa should not be exceeded, however. Threshold value FAZ: Set value AC: Abbreviations: AC AF open FAZ the respective minimum EN value, provided no other project-related air volume is given variable lower set value at 200 m/h, upper set value is the respective minimum EN value, provided no other project-related air volume is given

airflow controller particulate filter sash 500 mm open function display

KF mm OKFFB Pa

carbon filter, Camfil cartridge filter millimeter above final floor (AFFL) Pascal

PP polypropylene VF EU 4 filter S + L acid and base cabinet closed sash and horizontal sash closed SF particles filter Eu 13 UB underbench unit for bench-mounted fume cupboards and modules

SCALA Air Containment Specification

SECUFLOW bench-mounted fume cupboards EN 14175-3/6


fume cupboard with extract air mainfold (PP) (for f/c with FAZ/2 or AC pipe controller) dimensions (mm) (width x depth x height) connection ventilation connection AFFL (mm) (mm) wall distance to center of spigot (mm) f/c with extract air controller (PP) directly mounted (for f/c with standard AC) flange connection (mm) ventillation wall distance connection to center of AFFL Spigot (mm) (mm) min value/3 acc. to EN 14175-3 pressure drop

as per: 22.10.2012

variable air volumes AC 14175

AC
( damper

min. EN closed /1 (m/h) open (m/h)

Axis

Axis

(m/h)

FAZ (Pa)

open for 70 )

(Pa)

SECUFLOW - bench-mounted fume cupboard 1200 x 900 x 2700 1500 x 900 x 2700 1800 x 900 x 2700 2100 x 900 x 2700 SECUFLOW - low ceiling bench-mounted fume cupboard 1200 x 900 x 2400 1500 x 900 x 2400 1800 x 900 x 2400 2100 x 900 x 2400
/1 /2 /3

250 250 250 250

2720 2720 2720 2720

190 190 190 190

central central central central

250 (flange) 250 (flange) 250 (flange) 250 (flange)

2950 2950 2950 2950

190 190 190 190

central central central central

330 410 490 570

40 50 65 80

100 100 110 140

200 200 200 200

330 410 490 570

250 250 250 250

2420 2420 2420 2420

190 190 190 190

central central central central

250 (flange) 250 (flange) 250 (flange) 250 (flange)

2650 2650 2650 2650

190 190 190 190

central central central central

330 410 490 570

40 50 65 80

100 100 110 140

200 200 200 200

330 410 490 570

Values at closed sashes and horizontal sashes. Control systems to control the air exchange rates towards the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measurement

The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation plant. In consideration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %.

All air volumes given are related to an opening height of the sash of 500 mm as well as to the tracer gas peak values recommended by BG Chemie! In case exhaust air control systems + control components are provided by the client, air volumes may be deviating. Therefore operational limits shall be coordinted with WALDNER Laboreinrichtungen in advance. The minimum values for fume cupboards with a variable air volume depend on the airflow controller and on the ventilation plant and shall be clarified with WALDNER Laboreinrichtungen on an individual basis. A maximum pre-pressure of 600 Pa should not be exceeded, however. Threashold value FAZ: Set value AC: the respective minimum EN value, provided no other project-related air volume is given variable lower set value at 200 m/h, upper set value is the respective minium EN value, provided no other project-related air volume is given Abbreviations: AC airflow controller AF particulate filter open sash 500 mm open FAZ function display KF mm OKFFB Pa carbon filter, Camfil cartridge filter millimeter above final floor (AFF) Pascal PP polypropylene VF EU 4 filter S + L acid and base cabinet closed sash and horizontal sash closed SF particles filter Eu 13 UBbench-mounted fume cupboards and modules

SCALA Air Containment Specification

SECUFLOW bench-mounted fume cupboards with side installation EN 14175-3/6


fume cupboard with extract air mainfold (PP) /2 (for f/c with FAZ or AC pipe controller) dimensions (mm) (width x depth x height) connection ventilation connection AFFL (mm) (mm) wall distance to center of spigot (mm) f/c with extract air controller (PP) directly mounted (for f/c with standard AC) flange connection (mm) ventillation connection AFFL (mm) wall distance to center of Spigot (mm) min value acc. to EN 14175-3
/3

as per: 22.10.2012

pressure drop

variable air volumes AC 14175

AC
( damper

Axis

Axis

(m/h)

FAZ (Pa)

open for 70 )

(Pa)

min. EN open closed /1 (m/h) (m/h)

SECUFLOW - bench-mounted fume cupboard with side installation 1200 x 900 x 2700 1500 x 900 x 2700 1800 x 900 x 2700 2100 x 900 x 2700 2400 x 900 x 2700 SECUFLOW low ceiling height benchmounted fume cupboard with side installation 1200 x 900 x 2400 1500 x 900 x 2400 1800 x 900 x 2400
/1 /2 /3

250 250 250 250 250

2720 2720 2720 2720 2720

190 190 190 190 190

central central central central central

250 (flange) 250 (flange) 250 (flange) 250 (flange) 250 (flange)

2950 2950 2950 2950 2950

190 190 190 190 190

central central central central central

330 410 490 570 650

40 50 65 80 90

100 100 110 140 165

200 200 200 200 200

330 410 490 570 650

250 250 250

2420 2420 2420

190 190 190

central central central

250 (flange) 250 (flange) 250 (flange)

2650 2650 2650

190 190 190

central central central

330 410 490

40 50 65

100 100 110

200 200 200

330 410 490

Values at closed sashes and horizontal sashes. Control systems to control the air exchange rates toward the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measurement.

The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation plant. In consideration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %.

All air volumes given are related to an opening height of the sash of 500 mm as well as to the tracer gas peak values recommended by BG Chemie! In case exhaust air control systems + control components are provided by the client, air volumes may be deviating. Therefore operational limits shall be coordinated with WALDNER Laboreinrichtungen in advance. The minimum values for fume cupboards with a variable air volume depend on the airflow controller and on the ventilation plant and shall be clarified with WALDNER Laboreinrichtungen on an individual basis. A maximum pre-pressure of 600 Pa should not be exceeded, however. Threshold value FAZ: Set value AC: the respective minimum EN value, provided no other project-related air volume is given variable lower set value at 200 m/h, upper set value is the respective minimum EN value, provided no other project-related air volume is given Abbreviations: AC airflow controller AF particulate filter open sash 500 mm open FAZ function display KF mm OKFFB Pa carbon filter, Camfil cartridge filter millimeter above final floor (AFFL) Pascal PP polypropylene S + L acid and base cabinet SF particles filter Eu 13 UBbech-mounted fume cupboards and modules VF EU 4 filter closed sash and horizontal sash closed

SCALA Air Containment Specification

Mobile fume cupboards


Connection type/operational mode Connecting dimensions min value acc. to 14175-3

as per: 22.10.2012

pressure drop

dimensions (mm) (width x depth x height)

connection dia. (mm)

ventilation connection AFFL (mm) 2365

wall distance to center of spigot (mm)

FAZ Axis (m3/h) 300 DIN 12924 300 300 (Pa) 420

AeroEm AeroEm Mobil Air DIN 12924 Mobil Air Mobil Air with filter

EN 14175-3 geprft 1050 x 840 x 1975

free connection in room (Waldner Y-joint) (installation construction) exhaust air connection upper edge of Mobil Air air circulation mode

125

900 x 600 x 1215 900 x 600 x 1270

125

1137

45 --

/1 /2 /3

Values at closed sashes and horizontal sashes Control systems to control the air exchange rates toward the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measurement

The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation plant. In consideration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %. All air volumes given are related to an opening height of the sash of 500 mm as well as to the tracer gas peak values recommended by BG Chemie! In case exhaust air control systems + control components are provided by the client, air volumes may be deviating. Therefore operational limits shall be coordinated with WALDNER Laboreinrichtungen in advance. The minimum values for fume cupboards with a variable air volume depend on the airflow controller and on the ventilation plant and shall be clarified with WALDNER Laboreinirchungen on an individual basis. A maximum pre-pressure of 600 Pa should not be exceeded, however. Threshold value FAZ: the respective minimum EN value, provided no other project-related air volume is given

Abbreviations: AC AF open FAZ

airflow controller particulate filter sash 500 mm open function display

KF mm OKFFB Pa

carbon filter, Camfil cartridge filter millimeter above final floor (AFF) Pascal

PP S+L SF UB

polypropylene acid and base cabinet particles filter Eu 13 underbench unit for bench-mounted fume cupboards and modules

VF EU 4 filter closed sash and horizontal sash closed

SCALA Air Containment Specification

Filter fume cupboard EN 14175-3/6


pressure drop with filter equipment min value acc. to EN 14175-3 dimensions (mm) (width x depth x height) flange connection (mm) ventilation connection AFFL (mm) wall distance to center of spigot (mm)
/3

as per: 22.10.2012 pressure drop with filter equipment filter box with prefilter and particle filter (VF) prefilter F7 (SF) main filter H13

pressure drop without filter equipment

variable air volumes with AC filter box with prefilter and carbon filter EN 14175-6 (VF) prefilter F7 (KF) main filter

Axis

(m/h)

(Pa)

closed/1 (m3/h)

open (m3/h)

beginning (Pa)

end (Pa)

beginning (Pa)

end (Pa)

Filter fume cupboard with extract air filter box PP 1200 x 900 x 2700 1500 x 900 x 2700 1800 x 900 x 2700 Filter fume cupboard with extract air filter box PP and directly mounted extract air controller 1200 x 900 x 2700 1500 x 900 x 2700 1800 x 900 x 2700

250 250 250

2720 2720 2720 /2 (+330 mm for FAZ )

387 387 387

central central central

480 600 720

65 100 120

----

----

100 145 180

300 300 300

145 200 300

450 450 450

250 250 250

3050 3050 3050

387 387 390

central central central

480 600 720

170 170 190

200 200 200

480 600 720

205 215 250

450 450 450

250 270 310

500 500 500

Filter

dimensions (mm) 610 x 610 x 58

(VF) prefilter F7

air exchange rate (m/h) 480 600

pressure drop beginning end (Pa) (Pa) 30 220 35 45 50 65 75 5 10 15 220 220 500 500 500 5 10 15

/1

Values at closed sashes and horizontal sashes. Control systems to control the air exchange rates toward the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measurement.

/2

/3

The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation plant. In conseration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %.

(SF) particle filter particle filter H13 (KF) carbon filter cartridge filter Camfil

610 x 610 x 300

610 x 610 x 300

720 480 600 720 480 600 720

All air volumes given are related to an opening height of the sash of 500 mm as well as to the tracer gas peak values recommended by BG Chemie! In case exhaust air control systems + control components are provided by the client, air volumes may be deviating. Therefore operational limits shall be coordinated with WALDNER Laboreinrichtungen in adv The minimum values for fume cupboards with a variable air volume depend on the airflow controller and on the ventilation plant and shall be clarified with WALDNER Laboreinrichtungen on an individual basis. A maximum pre-pressure of 600 Pa should not be exceeded, however. Threshold value FAZ: the respective minimum EN value, provided no other project-related air volume is given Set value AC: variable lower set value at 200 m/h, upper set value is the respective minimum EN value, provided no other project-related air volume is given

Note:

For fume cupboards with filter equipment the pressure drop of the fume cupboard shall always be added to the pressure drop of the built-in filter stages. The initial value always applies for the addition of the fume cupboard's pressure drop and the non-polluted filter. The final value of filter fume cupboards is related to the filter with the highest end pressure drop due to unbalanced saturations of the various filters. The end pressure shall always be given if the Waldner airflow controll is built in, because then the AC can regulate the fume cupboard to a constant airflow Should the FAZ be used, a constant airflow controller shall be planned by the client. Abbreviations: AC airflow controller AF particulate filter open sash 500 mm open FAZ function display

KF mm OKFFB Pa

carbon filter, Camfil cartridge filter millimeter above final floor (AFFL) Pascal

PP S+L SF UB

polypropylene VF EU 4 filter acid and base cabinet closed sash and horizontal sash closed particles filter Eu 13 underbench unit for bench-mounted fume cupboards and modules

SCALA Air Containment Specification

SECUFLOW EN7 bench-mounted for high heat load EN 14175-7/6


fume cupboard with extract air mainfold (PP) (for f/c with FAZ/2 or AC pipe controller) dimensions (mm) (width x depth x height) connection ventilation connection AFFL (mm) (mm) wall distance to center of spigot (mm) f/c with extract air controller (PP) directly mounted (for f/c with standard AC) flange connection (mm) ventillation wall distance connection to center of AFFL Spigot (mm) (mm) min value/3 acc. to EN 14175-3 pressure drop

as per: 22.10.2012

variable air volumes AC 14175

AC
( damper

min. EN closed /1 (m/h) open (m/h)

Axis

Axis

(m/h)

FAZ (Pa)

open for 70 )

(Pa)

SECUFLOW - bench-mounted fume cupboard 1200 x 900 x 2700 1500 x 900 x 2700 1800 x 900 x 2700

250 250 250

2720 2720 2720

190 190 190

central central central

250 (flange) 250 (flange) 250 (flange)

2950 2950 2950

190 190 190

central central central

360/600/4 450/750/4 540/900/4

40 50 65

100 140 180

200 200 200

360/600/4 450/750/4 540/900/4

/1 /2 /3

Values at closed sashes and horizontal sashes. Control systems to control the air exchange rates towards the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measurement

The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation plant. In consideration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %. Air volumes without/with thermal load

/4

All air volumes given are related to an opening height of the sash of 500 mm as well as to the tracer gas peak values recommended by BG Chemie! In case exhaust air control systems + control components are provided by the client, air volumes may be deviating. Therefore operational limits shall be coordinted with WALDNER Laboreinrichtungen in advance. The minimum values for fume cupboards with a variable air volume depend on the airflow controller and on the ventilation plant and shall be clarified with WALDNER Laboreinrichtungen on an individual basis. A maximum pre-pressure of 600 Pa should not be exceeded, however. Threashold value FAZ: Set value AC: the respective minimum EN value, provided no other project-related air volume is given variable lower set value at 200 m/h, upper set value is the respective minium EN value, provided no other project-related air volume is given Abbreviations: AC airflow controller AF particulate filter open sash 500 mm open FAZ function display

KF mm OKFFB Pa

carbon filter, Camfil cartridge filter millimeter above final floor (AFF) Pascal

PP polypropylene VF EU 4 filter S + L acid and base cabinet closed sash and horizontal sash closed SF particles filter Eu 13 UBbench-mounted fume cupboards and modules

SCALA Air Containment Specification

fume cupboard for high heat and acidic load - DIN 14175-Part 7
fume cupboard with extract air manifold (PP) or scrubber (for f/c with FAZ or AC 2 pipe controller) dimensions (mm) (width x depth x height) connection (mm) Special application fume cupboard with extract air manifold 1200 x 900 x 2700 1500 x 900 x 2700 1800 x 900 x 2700 Special application fume cupboard with Friatec scrubber 1200 x 900 x 2700 with C54 1500 x 900 x 2700 with C54 1800 x 900 x 2700 with C90 ventilation connection AFFL (mm) wall dist.
to center of

as per: 22.10.2012

f/c with extract air controller (PP) directly mounted (for f/c with standard AC) flange connection (mm) ventilation connection AFFL (mm) wall dist.
to center of

min. value
acc. to DIN 12 924

pressure drop

spigot (mm)

axis

spigot (mm)

axis

(m3/h)

FAZ (Pa)

AC (Pa)

250 250 250

2410 2410 2410

197 197 197

central central central

250 250 250

2640 2640 2640

197 197 197

central central central

600 750 900

45 50 85

120 120 150

250 ( flange) 250 ( flange) 250 ( flange)

2815/3145 2815/3145

/8

207 207 207

central central central

250 250 250

3145 3145 3145

207 207 207

central central central

600 750 900

440 570 740

510 640 800

/8

2815/3145 /8

/2

Control systems to control the air exchange rate toward the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measurement. If a collection duct with a sprinkler or a scrubber is used, the pipe controller shall be utilized for the AC. The sprinkler is to clean the collection duct and may only be operated if the exhaust air device is switched off. The sprinkler does not replace a fume scrubber.

/6

/7

The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation. In consideration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %. without/with 330 mm pipe for the FAZ Abbreviations: AC airflow controller AF particulate filter open sash 500 mm open FAZ function display

/8

KF carbon filter, Camfil cartridge filter mm millimeter OKFFB above final floor (AFFL) Pa Pascal

PP polypropylene S + L acid and base cabinet SF particles filter Eu 13

VF EU 4 filter closed sash and horizontal sash closed

UB underbench unit for bench-mounted fume cupboards and modules

SCALA Air Containment Specification

Fume cupboards for perchloric acid - EN 14175 - Part 7


fume cupboard with extract air manifold (PP) or scrubber (for f/c with FAZ or AC 2 pipe controller) dimensions (mm) (width x depth x height) connection (mm) Special application fume cupboard with extract air manifold and water washing device /6 1200 x 900 x 2710 1500 x 900 x 2700 1800 x 900 x 2700 Special application fume cupboard with Friatec scrubber 1200 x 900 x 2700 with C54 1500 x 900 x 2700 with C54 1800 x 900 x 2700 with C90 ventilation connection AFFL (mm) wall dist.
to center of

as per: 22.10.2012

f/c with extract air controller (PP) directly mounted (for f/c with standard AC) flange connection (mm) ventilation connection AFFL (mm) wall dist.
to center of

min. value
acc. to DIN 12 924

pressure drop

spigot (mm)

axis

spigot (mm)

axis

(m3/h)

FAZ (Pa)

AC (Pa)

250 ( flange) 250 ( flange) 250 ( flange)

2495/2825 /8 2495/2825 /8 2495/2825 /8

197 197 197

central central central

600 750 900

140 160 270

300 350 500

250 ( flange) 250 ( flange) 250 ( flange)

2815/3145 2815/3145

/8

207 207 207

central central central

250 250 250

3145 3145 3145

207 207 207

central central central

600 750 900

440 570 740

510 640 800

/8

2815/3145 /8

/2

Control systems to control the air exchange rate toward the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measurement. If a collection duct with a sprinkler or a scrubber is used, the pipe controller shall be utilized for the AC. The sprinkler is to clean the collection duct and may only be operated if the exhaust air device is switched off. The sprinkler does not replace a fume scrubber.

/6

/7

The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation. In consideration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %. without/with 330 mm pipe for the FAZ Abbreviations: AC airflow controller AF particulate filter open sash 500 mm open FAZ function display

/8

KF carbon filter, Camfil cartridge filter mm millimeter OKFFB above final floor (AFFL) Pa Pascal

PP polypropylene S + L acid and base cabinet SF particles filter Eu 13

VF EU 4 filter closed sash and horizontal sash closed

UB underbench unit for bench-mounted fume cupboards and modules

SCALA Air Containment Specification

Fume cupboards for hydrofluoric acid - EN 14175 - Part 7


fume cupboard with extract air manifold (PP) or scrubber (for f/c with FAZ or AC 2 pipe controller) dimensions (mm) (width x depth x height) connection (mm) Special application fume cupboard with extract air manifold 1200 x 900 x 2700 1500 x 900 x 2700 1800 x 900 x 2700 Special application fume cupboard with Friatec scrubber 1200 x 900 x 2700 with C54 1500 x 900 x 2700 with C54 1800 x 900 x 2700 with C90 ventilation connection AFFL (mm) wall dist.
to center of

as per: 22.10.2012

f/c with extract air controller (PP) directly mounted (for f/c with standard AC) flange connection (mm) ventilation connection AFFL (mm) wall dist.
to center of

min. value
acc. to DIN 12 924

pressure drop

spigot (mm)

axis

spigot (mm)

axis

(m3/h)

FAZ (Pa)

AC (Pa)

250 250 250

2410 2410 2410

197 197 197

central central central

250 250 250

2640 2640 2640

197 197 197

central central central

600 750 900

45 50 85

120 120 150

250 ( flange) 250 ( flange) 250 ( flange)

2815/3145 2815/3145

/8

207 207 207

central central central

250 250 250

3145 3145 3145

207 207 207

central central central

600 750 900

440 570 740

510 640 800

/8

2815/3145 /8

/2

Control systems to control the air exchange rate toward the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measurement. If a collection duct with a sprinkler or a scrubber is used, the pipe controller shall be utilized for the AC. The sprinkler is to clean the collection duct and may only be operated if the exhaust air device is switched off. The sprinkler does not replace a fume scrubber.

/6

/7

The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation. In consideration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %. without/with 330 mm pipe for the FAZ Abbreviations: AC airflow controller AF particulate filter open sash 500 mm open FAZ function display

/8

KF carbon filter, Camfil cartridge filter mm millimeter OKFFB above final floor (AFFL) Pa Pascal

PP polypropylene S + L acid and base cabinet SF particles filter Eu 13

VF EU 4 filter closed sash and horizontal sash closed

UB underbench unit for bench-mounted fume cupboards and modules

SCALA Air Containment Specification

Radio-isotope fume cupboard - DIN 25466


min value/3 acc. to EN 14175-3 dimensions (mm) (width x depth x height) connection (mm) Radio-isotope fume cupboard with extract air filter box PP on top and FAZ 1200 x 900 x 2700 1500 x 900 x 2710 ventilation connection AFFL (mm) wall distance to center of spigot (mm) pressure drop without filter equipment variable air volumes with AC 14175-6 min. EN Axis (m3/h) (Pa) closed /1 open beginning (Pa) end (Pa) (m3/h) calculation examples for indications of pressure drops with different filter equipment

as per: 22.10.2012

beginning (Pa)

end (Pa)

fume cupboard + VF + SF 250 (flange) 250 (flange) 2720 2720 (+ 330 mm bei FAZ) /2 387 387 central central 480 600 60 wo. filter 90 wo. filter fume cupboard + VF + SF 250 (flange) 250 (flange) 3050 3050 387 387 central central 480 600 100 wo. filter 100 wo. filter 200 200 480 600 180 200 400 400 140 190 400 400

fume cupboard + VF + SF + KF + AF -

Radio-isotope fume cupboard with extract air filter box on top and extract air controller 1200 x 900 x 2700 1500 x 900 x 2700 Radio-isotope fume cupboard with extract air filter box on side 1200 x 900 x 2700 1500 x 900 x 2700 Radio-isotope fume cupboard with extract air filter box on side and extract air controller 1200 x 900 x 2700 1500 x 900 x 2700 250 (flange) 250 (flange) 2550 2550 450 450 525 v. li. 525 v. li.
/2

fume cupboard + VF + SF + KF + AF -

fume cupboard + VF + SF 250 250 2550 2550 450 450 525 v. li. 525 v. li. 480 600 70 wo.filter 90 wo. filter 460 540 150 190 400 400

fume cupboard + VF + SF + KF + AF 480 600 185 240 600 600

fume cupboard + VF + SF 480 600 120 wo. filter 120 wo. filter 200 200 480 600 200 220 400 400

fume cupboard + VF + SF + KF + AF 480 600 235 270 600 600

Filter

dimensions (mm) 610 x 610 x 58

(PF) prefilter F7

air exchange rate (m/h) 480 600 480 600 480 600 480 600

pressure drop beginning end (Pa) (Pa) 30 220 35 220 50 65 5 10 30 40 500 500 5 10 250 250

Control systems to control the air exchange rates toward the upper collection duct edge shall have a distance of at least 250 mm to not disturb the FAZ measurement. The minimum value acc. to EN 14175 may not be falling below and shall therefore not be taken as the design basis for the ventilation plant. In consideration of the design tolerances for e.g. fans, airflow controllers, throttling elements and other components related to the ventilation WALDNER recommends to allow for a safety surcharge of 20 %. Note: For fume cupboards with filter equipment the pressure drop of the built-in filter stages shall always be added. The initial value always applies for the addition of the fume cupboard's pressure drop and the unpolluted filter. The end value is limited for fume cupboard with filter boxes on top to 400 Pa and for adjacent filter boxes to 600 Pa due to an unbalanced saturation of the various filters. The given end pressure drops are recommended by WALDNER Laboreinrichtungen to achieve an ideal compromise between the parameters of the filter endurance, a different saturation time and the device's pressure drop. These values may deviate downwards or upwards if a longer filter endurance is required, or if a lower device pressure is available. The end pressure shall always be given for the Waldner airflow controller, as the AC then regulates the fume cupboard to a constant airflow. Should the FAZ be used, utilization of a constant airflow controller shall be planned by the client. The device shall also be designed for the relevant end pressure.

/3

(PaF) particle filter Hepa H13

610 x 610 x 300

(CF) carbon filter

610 x 610 x 300

(AF) abrasion filter

610 x 610 x 300

Abbreviations: AC AF open FAZ

airflow controller particulate filter sash 500 mm open function display

KF mm OKFFB Pa

carbon filter, Camfil cartridge filter millimeter above final floor (AFFL) Pascal

PP S+L SF UB

polypropylene VF EU 4 filter acid and base cabinet closed sash and horizontal sash closed Eu 13 particles filter underbench unit for bench-mounted fume cupboards and modules

SCALA Air Containment Specification

Extractions
without controller dimensions (mm) (width x depth x height)
connection

as per: 22.10.2012

extract air flow rate module installation wall distance to center of spigot (mm) 220 220 acc. to plan acc. to plan without controller (m3/h) central central acc. to plan acc. to plan 480 600 50 100 (Pa) 25 30 150 150 with controller (m3/h) 480 600 50 100 (Pa) 150 150 200 200

dia. (mm)

ventilation connection AFFL (mm) 2740 2740 acc. to plan acc. to plan

wall installation wall distance to center of spigot (mm) 170 170 acc. to plan acc. to plan

axis

Extractor hood PP Hood 1200 Hood 1500 local extractor hood System 50 System 75

1200 x 600 x 300 1500 x 600 x 300

200 200 98,5 (outer dia) 98,5 (outer dia)

snifter hood SCALA snifter hood SCALA (at Service spine) DC spraying cabinet DCS PVC

dia 28

10

200

400X379X409

dia 140

2610

470

196 f.ri.

300

70

300

170

Atom absorption spectrometer (AAS) - extraction devices Depending on the gas type used, fuel gases of different temperature are created. The heat volumes that need to be extracted depend on the utilized fuel gas which results in different airflows. Fuel gases air-propane air-propane air-propane air-hydrogen air-hydrogen air-hydrogen air-acetylene air-acetylene air-acetylene nitrous oxide-acetylene nitrous oxide-acetylene nitrous oxide-acetylene Q in Watt W 1396 1396 1396 2093 2093 2093 6980 6980 6980 10470 10470 10470 Exhaust air m/h 100 150 200 100 150 200 350 400 450 500 550 600 Temp. Increase K 40 27 20 60 40 30 58 51 45 61 55 51
Temp.in exhaust air duct

C 62 49 42 83 62 52 80 73 67 83 77 73

Abbreviations: AC airflow controller AF particulate filter open sash 500 mm open FAZ function display

KF mm OKFFP Pa

carbon filter, Camfil cartridge filte millimeter above final floor (AFFL) Pascal

PP S+L SF UB

polypropylene VF EU 4 filter acid and base cabinet closed sash and horizontal sash closed particles filter Eu 13 underbench unit for bech-mounted fume cupboards and modules

SCALA Air Containment Specification

Storage cupboards
dimensions (mm) (width x depth x height) connect. dia. (mm) acid and base cabinet 600 x 550 x 2090 laboratory cabinet 450 x 550 x 2090 600 x 550 x 2090 900 x 550 x 2090 1200 x 550 x 2090 pull-out cabinet 600 x 550 x 2090 900 x 550 x 2090 1200 x 550 x 2090 UB extractions UB+floor extraction for bench-mounted fume cupboards UB+floor extraction for low ceiling bench-mounted fume cupboards UB+floor extraction for sprecial fume cupboards UB+floor extraction for service spine 90 90 90 90 90 90 90 90 90 90 90 90
Abbreviations: AC airflow controller AF particulate filter open sash 500 mm open FAZ function display

as per: 22.10.2012 without controller ventilat. wall dist. to center of connect. AFFL spigot material (mm) (mm) PPs PPs PPs PPs PPs PPs PPs PPs PE PE PE PPS 2176 2176 2176 2176 2176 2176 2176 2176 2630 2270 2860 2710 90 90 90 90 90 90 90 90 50 50 50 with constant controller ventilat. wall dist. to center of connect. AFFL spigot (mm) (mm) 2376 2376 2376 2376 2376 2376 2376 2376 90 90 90 90 90 90 90 90

connect. dia. axis central central central central central central central central (mm) 90 90 90 90 90 90 90 90 90 90 90 90

axis central central central central central central central central

Waldner planning recommendation constant (m3/h) (Pa) 100 50 50 50 50 50 50 50 30 30 30 30 80 20 20 20 20 20 20 20 70 70 70 40

Waldner planning recommendation with controller (m3/h) (Pa) 100 50 50 50 50 50 50 50 30 30 30 30 100 100 100 100 100 100 100 100 120 120 120 100

KF mm OKFFB Pa

carbon filter, Camfil cartridge filter millimeter above final floor (AFFL) Pascal

PP S+L SF UB

polypropylene VF EU 4 filter acid and base cabinet closed sash and horizontal sash closed particles filter Eu 13 underbench unit for bench-mounted fume cupboards and modules

SCALA Air Containment Specification

Dperthal safety cabinets and cabinets for gas cylinders


dimensions (mm) (width x depth x height) safety cabinet type 90 for solvents EN 14470-1 (full-height cabinet) 81007108 -81007106 81007107 1195 x 595 x 2040 895 x 595 x 2040 595 x 595 x 2040 595 x 595 x 2040 75 75 75 75 PE PE PE PE 2200 2200 2200 2200 100 100 100 100 522 f.le. 372 f.le. 222 f.le. 222 f.le. 10 4,5 4,5 4,5 <1 <1 <1 <1 30 30 30 30 50 50 50 50 30 30 30 30 connect. dia. (mm) without controller ventilat. wall dist. to center connect. AFFL of spigot (mm) (mm) Manufacturer's instructions 10fold air exchange axis (m3/h) (Pa) manufacturer's instructions Waldner planning recommendation without controller (m3/h) (Pa)

as per: 22.10.2012 Waldner planning recommendation with controller (m3/h) (Pa)

material

(m3/h)

(Pa)

120 120 120 120

safety cabinet type 90 for solvents EN 14470-1 (underbench cabinet for fume cupboards) 81007114 81007115 81007116 81007113 81007109 81007110 81007111 81007112 81007117 safety module for gas cylinders EN 14470-2 G30 81007119 (left) 81007120 (right) 81007123 81007125 81007127 73-200660-501L 73-200660-501 73-200960-501 73-201260-501 73-201460-501 safety module for gas cylinders EN 14470-2 G90 81007121 (left) 81007122 (right) 81007124 81007126 81007128 79-200660-501L 79-200660-501 79-200960-501 79-201260-501 79-201460-501 595 x 610 x 2030 895 x 610 x 2030 1195 x 610 x 2030 1395 x 610 x 2030
Abbreviations: AC airflow controller AF particulate filter open sash 500 mm open FAZ function display

600 x 595 x 635 600 x 595 x 635 600 x 595 x 635 895 x 595 x 635 1100 x 595 x 635 1100 x 595 x 635 1100 x 595 x 635 1100 x 595 x 635 1400 x 595 x 635

75 75 75 75 75 75 75 75 75

PE PE PE PE PE PE PE PE PE

424 424 424 424 424 424 424 424 424

148 f.ri. 148 f.ri. 148 f.ri. 148 f.ri. 398 f.ri. 398 f.ri. 398 f.ri. 398 f.ri. 398 f.ri.

1,5 1,5 1,5 1,5 2,5 2,5 2,5 2,5 3

<1 <1 <1 <1 <1 <1 <1 <1 <1

30 30 30 30 30 30 30 30 30

50 50 50 50 50 50 50 50 50

30 30 30 30 30 30 30 30 30

120 120 120 120 120 120 120 120 120

combustible and oxidizing gases 10fold air exchange 595 x 610 x 2030 895 x 610 x 2030 1195 x 610 x 2030 1395 x 610 x 2030 75 75 75 75 sheet steel sheet steel sheet steel sheet steel 2099 2099 2099 2099 100 100 100 100 178 f.le. 328 f.le. 478 f.le. 578 f.le. 4 6,5 8,4 10 0 0 5 7

low poisonous, poisonous, low poisonous, poisonous, very poisonous gases 120fold air very poisonous gases 120fold exchange air exchange 47 76 105 124 58 135 245 330 50 80 110 125 65 150 270 335 60 90 110 125 115 200 320 385

combustible and oxidizing gases 10fold air exchange 75 75 75 75 sheet steel sheet steel sheet steel sheet steel
KF mm OKFFB Pa

low poisonous, poisonous, low poisonous, poisonous, very poisonous gases 120fold air very poisonous gases 120fold exchange air exchange 39,5 66,5 94 112 40 110 210 307 50 70 100 120 65 120 240 355 50 70 100 120 115 170 290 405

2099 2099 2099 2099


carbon filter, Camfil cartridge filter millimeter above final floor (AFFL) Pascal

100 100 100 100

178 f.le. 328 f.le. 478 f.le. 578 f.le.

3,3 5,6 7,8 9,3


PP S+L SF UB

0 0 4 6

polypropylene acid and base cabinet particles filter Eu 13 underbench unit for bench-mounted fume cupboards and modules

VF EU 4 filter closed sash and horizontal sash closed

SCALA Air Containment Specification

Asecos safety cabinets and cabinets for gas cylinders


dimensions (mm) (width x depth x height) safety cabinet type 90 for solvents EN 14470-1 (full-height cabinet) 81007085 81007086 -81007081 (left) 81007082 (right) 81007083 (left) 81007084 (right) 1200 x 615 x 1968 1200 x 615 x 1968 900 x 615 x 1968 600 x 615 x 1968 600 x 615 x 1968 75 75 75 75 75 sheet steel sheet steel sheet steel sheet steel sheet steel 1968 1968 1968 1968 1968 150 150 150 150 150 485 f.ri.. 485 f.ri.. 335 f.ri.. 170 f.ri.. 170 f.ri.. 9 9 9 4 4 4 4 4 2 2 30 30 30 30 30 50 50 50 50 50 30 30 30 30 30 connect. dia. (mm) without controller ventilat. wall dist. to center connect. AFFL of spigot (mm) (mm) Manufacturer's instructions 10fold air exchange axis (m3/h) (Pa) manufacturer's instructions Waldner planning recommendation without controller (m3/h) (Pa)

as per: 22.10.2012 Waldner planning recommendation with controller (m3/h) (Pa)

material

(m3/h)

(Pa)

150 150 150 150 150

safety cabinet type 90 for solvents EN 14470-1 (underbench cabinet for fume cupboards) 81007092 81007093 81007094 81007091 81007087 81007088 81007089 81007090 81007095 safety module for gas cylinders EN 14470-2 G30 81007096 (left) 81007097 (right) 81007100 81007102 81007104 safety module for gas cylinders EN 14470-2 G90 81007098 (left) 81007099 (right) 81007101 81007103 81007105
Abbreviations: AC AF open

592 x 570 x 635 592 x 570 x 635 592 x 570 x 635 890 x 570 x 635 1100 x 5570 x 635 1100 x 5570 x 635 1100 x 5570 x 635 1100 x 5570 x 635 1400 x 570 x 635

75 75 75 75 75 75 75 75 75

sheet steel sheet steel sheet steel sheet steel sheet steel sheet steel sheet steel sheet steel sheet steel

295 295 295 295 295 295 295 295 295

181 f.ri. 181 f.ri.. 181 f.ri.. 299 f.ri.. 300 f.ri.. 300 f.ri.. 300 f.ri.. 300 f.ri.. 300 f.ri..

2 2 2 2 2 2 2 2 3

1 1 1 1 1 1 1 1 1 low poisonous, poisonous, very poisonous gases 120fold air exchange 51 82 112 132 25 65 121 148

30 30 30 30 30 30 30 30 30

50 50 50 50 50 50 50 50 50

30 30 30 30 30 30 30 30 30

150 150 150 150 150 150 150 150 150

combustible and oxidizing gases 10fold air exchange 600 x 615 x 2050 900 x 615 x 2050 1200 x 615 x 2050 1400 x 615 x 2050 75 75 75 75 sheet steel sheet steel sheet steel sheet steel 2050 2050 2050 2050 85 85 85 85 185 f.ri.. 335 f.ri.. 485 f.ri.. 585 f.ri.. 5 7 9 11 2 2 3 3

low poisonous, poisonous, very poisonous gases 120fold air exchange 60 90 120 140 35 80 140 170 60 90 120 140 85 130 190 220

combustible and oxidizing gases 10fold air exchange 600 x 615 x 2050 900 x 615 x 2050 1200 x 615 x 2050 1400 x 615 x 2050 75 75 75 75 sheet steel sheet steel sheet steel sheet steel 2050 2050 2050 2050 85 85 85 85 185 f.ri.. 335 f.ri.. 485 f.ri.. 585 f.ri.. 4 6 8 10 1 1 3 3

low poisonous, poisonous, very poisonous gases 120fold air exchange 42 71 94 112 85 147 105 143

low poisonous, poisonous, very poisonous gases 120fold air exchange 50 80 100 120 125 150 120 165 50 80 100 120 175 200 170 215

G90 205 60.1 G90 205 60-R1 G90 205 90.1 G90 205 120.1 G90 205 140.1

airflow controller particulate filter sash 500 mm open

FAZ function display KF carbon filter, Camfil cartridge filter mm millimeter

OKFFB above final floor (AFFL) Pa Pascal PP polypropylene

S + L acid and base cabinet VF EU 4 filter SF particles filter Eu 13 closed sash and horizontal sash closed UB underbench unit for bench-mounted fume cupboards and modules

You might also like