Professional Documents
Culture Documents
1.Capacity: 2,080 PCS/8H (Brick size: 390*190*190 MM). 2.Host Machine Power: 3.75 KW 3.Weight: 0.96 T 4.Exterior Size: 1200*1200*1100 MM 5.Certificate: ISO9001: 2008 & CE
Introduction
This machine can suit for, Especially small and medium-sized enterprises and individuals to use, small investment, quick results.It is a compact machine with electric and hydraulic system,each procedure action locks with each other to guarantee the machine operate safely,easily and dependably.Through moldreleasing oil cyclinder,the mold box was locked into the vibration table with high rigidity to reach the synchronous vibration,so that the concrete can be fluidified and exhausted in two or three seconds to ensure the high-density,especially suitable to produce the standard blocks,which can be piled up immediately so that the pallet investment can be saved directly.
NF-4A Small Manual Block Machine Main Technical Parameters Overall dimension Hydraulic method Demold method Exciting power Excitation frequency Total power Total mass Molding cycle Molding Capacity Types of bricks can be made 1300*1500*1000mm Mould vibration Hydraulic 28.6 KN 4500 r/min 5.95KW 1000KG 30(Second) 4 Pcs/mould(400*200*200/390*190*190 mm) 2000~2600pcs/shift(8h) 390*240*190/390*150*190/390*115*190/Customize
Raw material
Crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, perlite, and other industrial wastes. First-rate After-service
Provide consultation services for customers, determine operational scales, and provide factory-establishing plans. Freely install, debug, and provide relevant technical training. Strict carry out three guarantees (guaranteed quality, guaranteed quantity and guaranteed repair), and so well technical consultation Ensure spare parts and components available adequately and timely. Mould Making and Accessories offered.
NF-6A Mobile Block Making Machine Main Technical Parameters Overall dimension Hydraulic method Demold method Turning method Hydraulic system pressure Excitation frequency Total power Total mass Molding cycle Molding Capacity Types of bricks Moving method Excitation way Raw material 5230*2300*5450mm Mould vibration Hydraulic Hydraulic 8-20Mpa 3200Hz 12KW 2600KG 20S 6 Pcs/mould(400*200*200/390*190*190 mm) 700-800Pcs/hour 390*240*190/390*150*190/390*115*190/Customiz e Automatically move and hydraulic steering Three-dimensional box excitation Crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, perlite, and other industrial wastes.