You are on page 1of 14

BRIEF

INTRODUCTION

CONTENTS
Automatic self-priming clean water pump
AUTO SFA Series SFA Series 02 04

Horizontal multi -stage centrifugal pump


SFM Series 16

Peripheral pump
SFB Series SFC Series 05 06

Automatic water pump


AUTO SFC Series AUTO SFD Series AUTO SFK Series AUTO SKI Series 17 17 17 17

Centrifugal pump
SFD Series SFE Series 07 08

Swimming pool water pump


SFN Series 18

Electric pump two impellers


SFF Series 09

Oil pump Stainless centrifugal pump


SFG Series 10 SFO Series 19

FUJIAN SILVER ELEPHANT ELECTRICAL CO., Ltd was established with 3600 million Yuan capital and three manufacturing plants in August, 1996. Now, our company has 63860m2 floor area, 72000m2 building area and 830 employees, it is one of the most largest electric pumps manufacturing enterprises. Our leading products are "ESE" brand series: peripheral pump, centrifugal pump, centrifugal jet pump, deep well water pump, clean water pump, submersible pump, and automatic self-priming pump, they are 78 series and more than 3300 models. And also low voltage SKD series, generator, gasoline generator set and diesel generator set are our main products. Our brand "ESE" is honored with the reputation of Fujian famous trademark, meanwhile, our pumps are known as Fujian brand products, several models even obtain National Utility Model. We always insists "Excellent quality, satisfied customer" since its establishment. We try our best to carry out the strategy of our brand, technology and mechanism innovation, management and product standardization to meet the demand of overseas and domestic markets. Nowadays, our company has become an outstanding enterprise with 700 million Yuan annual production value. Our company always requires us with the guideline of "adapting and meet the market on all sides"; we believe in the faith of "honesty is essential, try to seek excellence". We devote ourselves to doing research and development of environment friendly energy-saving and high-efficiency pumps, and decide to make more value for all interested parties honestly.

Submersible pump Self-priming jet pump


SFP Series SFH Series SFI Series SFJ Series SFK Series 11 12 13 14 SFQ Series SFR Series 20 21 22

Submersible sewage pump Deep well automatic pumps


SFS Series SFL Series 15 SFT Series 23 24

SFA AUTO SELF-PRIMING CLEAN WATER PUMPS SERIES

SFA AUTO SELF-PRIMING CLEAN WATER PUMPS SERIES


WATER PUMP ADVANTAGES

Capacitor Structure: Float Connect

Pump Body: Elephant model

Fan cover: Screw locked

Rotor Shaft: Stainless Steel Welding

Brass Valve: Sand Prevention

Brass Ring Embeded: Anti-rust

PERFORMANCE CURVE
H(m) 80 70 60
A=SFA-120A B=SFA-125A C=SFA-250A D=SFA-370A E=SFA-550A F=SFA-750A G=SFA-1100A

SFA AUTO SERIES


AUTOMATIC SELF-PRIMING CLEAN WATER PUMPS SERIES
INSTALLATION AND APPLICATION
SFA AUTO series pumps are the patented and upgrade products of Silver Elephant Company with technology innovation, which can realize fullautomatic operation, and are suitable for cool-hot water transportation in the whole day; they are a sort of ideal household water supply facilities with multipurpose.

50 40

H F E D C B A G

H=SFA-1500A

30 20 10 0 0 0.3 0.6 0.9

OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 105 Max Ambient Temperature: +45

1.2

1.5

1.8

2.1

2.4

2.7

3.0

3.3

3.6
Q(m 3/h)

STRUCTURAL CHARACTERISTICS
PUMP BODY: Cast iron IMPELLER: Brass FRONT COVER: Cast iron MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

TECHNICAL DATA
Power Model HP SFA-120A SFA-125A SFA-250A SFA-370A SFA-550A SFA-750A SFA-1100A SFA-1500A 0.16 0.2 0.4 0.6 0.75 1 1.5 2 KW 0.12 0.125 0.25 0.4 0.55 0.75 1.1 1.5 2850 2850 2850 2850 2850 2850 2850 2850 R.P.M H.Max (m) 28 30 35 38 50 55 60 65 Q.Max (L/min) 30 30 35 40 45 50 55 60 S.Head (m) 9 9 9 9 9 9 9 9 Pipe Dia 1"X1" 1"X1" 1"X1" 1"X1" 1"X1" 1"X1"
1 11 2 "X12 1 1 12 "X12

Pressure (kg) 1.1-1.8 1.1-1.8 1.1-1.8 1.1-1.8 1.4-2.8 1.4-2.8

" "

2.0-4.0 2.0-4.0

02

WWW.CCESE.COM

SF is Product ID of ELEPHANT CLASS series, suffix A stands for automatic

03

SFA SELF-PRIMING CLEAN WATER PUMPS SERIES

SFB PERIPHERAL WATER PUMPS SERIES

SFA SERIES
INSTALLATION AND APPLICATION OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 105 Max Ambient Temperature: +45

SELF-PRIMING CLEAN WATER PUMPS SERIES


SFA series pumps are the patented and upgrade products of Silver Elephant Company with technology innovation. It is suitable for cool-hot water transportation in the whole day; they are a sort of ideal household water supply facilities with multipurpose.

SFB SERIES
INSTALLATION AND APPLICATION OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

PERIPHERAL WATER PUMPS SERIES

For their reliable performance and economy, SFB series pumps are suitable for domestic usage and irrigating garden. To maintain the long duty work of pumps, the water source should be clean water or non-aggressive liquids only, without sand or other solid impurities.

STRUCTURAL CHARACTERISTICS
PUMP BODY: Cast iron IMPELLER: Brass FRONT COVER: Cast iron MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

PERFORMANCE CURVE
H (m)

STRUCTURAL CHARACTERISTICS
A=SFA-120 B=SFA-125 C=SFA-250 D=SFA-370 E=SFA-550 F=SFA-750 G=SFA-1100 H=SFA-1500

PERFORMANCE CURVE
H (m)

80 70 60 50 40 30 20 10 0 0 0.3 0.6 0.9

PUMP BODY: Cast iron IMPELLER: Brass IMPELLER COVER:Brass FRONT COVER: Cast iron MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

60 50 40

E D C B

A=SFB-370 B=SFB-550 C=SFB-750 D=SFB-1100 E=SFB-1500

30 20 10 0

D E A
1.2 1.5

C
1.8 2.1 2.4 2.7 3.0 3.3 3.6

10

20

30

40

50

60
Q(L/min)

Q(m 3/h)

TECHNICAL DATA
Power Model SFA-120 SFA-125 SFA-250 SFA-370 SFA-550 SFA-750 SFA-1100 SFA-1500 HP 0.16 0.2 0.4 0.6 0.75 1 1.5 2 KW 0.12 0.125 0.25 0.4 0.55 0.75 1.1 1.5 R.P.M 2850 2850 2850 2850 2850 2850 2850 2850 H.Max (m) 28 30 35 38 50 55 60 65 Q.Max (L/min) 30 30 35 40 45 50 55 60 S.Head (m) 9 9 9 9 9 9 9 9 Pipe Dia 1"X1" 1"X1" 1"X1" 1"X1" 1"X1" 1"X1"
1 11 2 "X12 " 1 11 2 "X12 "

TECHNICAL DATA
Power Model HP SFB-370 SFB-550 SFB-750 SFB-1100 SFB-1500 0.5 0.75 1 1.5 2 KW 0.37 0.55 0.75 1.1 1.5 2850 2850 2850 2850 2850 35 40 50 58 65 35 40 50 55 57 9 9 9 9 9 1"X1" 1"X1" 1"X1"
1 11 2 "X12 " 1 11 2 "X12 "

R.P.M

H.Max (m)

Q.Max (L/min)

S.Head (m)

Pipe Dia

04

SF is Product ID of ELEPHANT CLASS series.

SF is Product ID of ELEPHANT CLASS series.

05

SFC PERIPHERAL WATER PUMPS SERIES

SFD CENTRIFUGAL PUMPS SERIES

SFC SERIES
INSTALLATION AND APPLICATION OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

PERIPHERAL WATER PUMPS SERIES

SFD SERIES
INSTALLATION AND APPLICATION OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

CENTRIFUGAL PUMPS SERIES

For their reliable performance and economy, SFC series pumps are suitable for domestic usage and irrigating garden. To maintain the long duty work of pumps, the water source shall be clean water or nonaggressive liquids only, without sand or other solid impurities.

These centrifugal pumps supply high flow service for irrigation with reliable efficiency. It is suitable for drawing water from lakes, rivers, wells and industrial pools. These series are recommended for rural, agricultural and industrial applications.

STRUCTURAL CHARACTERISTICS
PUMP BODY: Cast iron IMPELLER: Brass FRONT COVER: Cast iron MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards.

PERFORMANCE CURVE
H (m)

STRUCTURAL CHARACTERISTICS
PUMP BODY: Cast iron IMPELLER : Brass FRONT COVER: Cast iron MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards.

PERFORMANCE CURVE
H (m) 35

60 50 40

E D C B

A=SFC-370 B=SFC-550 C=SFC-750 D=SFC-1100 E=SFC-1500

30 25 20 15

E D C B

A=SFD-370 B=SFD-550 C=SFD-750 D=SFD-1100 E=SFD-1500

30

20 INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 10 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order. 0 0 10 20 30 40 50 60 70

10 INSULATION: Class B/F PROTECTION: IP44/54 5 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on 0 request. You could customize special requirements before placing order. 0

30

60

90

120

150

180

220
Q(L/min)

Q(L/min)

TECHNICAL DATA
Power Model HP SFC-370 SFC-550 SFC-750 SFC-1100 SFC-1500 0.5 0.75 1 1.5 2 KW 0.37 0.55 0.75 1.1 1.5 2850 2850 2850 2850 2850 35 40 50 58 65 35 40 50 55 57 9 9 9 9 9 1"x1" 1"x1" 1"x1"
1 11 2 "x12 " 1 11 2 "x12 "

TECHNICAL DATA
R.P.M H.Max (m) Q.Max (L/min) S.Head (m) Power Pipe Dia Model HP SFD-370 SFD-550 SFD-750 SFD-1100 SFD-1500 0.5 0.75 1 1.5 2 KW 0.37 0.55 0.75 1.1 1.5 2850 2850 2850 2850 2850 20 26 30 32 34 72 95 110 150 180 9 9 9 9 9 1"X1" 1"X1" 1"X1" 1"X1" 1"X1" R.P.M H.Max (m) Q.Max (L/min) S.Head (m) Pipe Dia

06

SF is Product ID of ELEPHANT CLASS series.

SF is Product ID of ELEPHANT CLASS series.

07

SFE CENTRIFUGAL PUMPS SERIES

SFF ELECTRIC PUMPS TWO IMPELLERS SERIES

SFE SERIES
INSTALLATION AND APPLICATION

CENTRIFUGAL PUMPS SERIES

SFF SERIES
INSTALLATION AND APPLICATION OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

ELECTRIC PUMPS TWO IMPELLERS SERIES

These centrifugal pumps supply high flow service for irrigation with reliable efficiency.It is suitable for drawing water from lakes, rivers, wells and industrial pools. These series are recommended for rural, agricultural and industrial applications.

SFF series pumps are reliable efficiency and energy saving, they are good choices for domestic, agricultural and industrial fields.

OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

STRUCTURAL CHARACTERISTICS
PERFORMANCE CURVE
H (m) 30

STRUCTURAL CHARACTERISTICS
PUMP BODY: Cast iron IMPELLER: Brass FRONT COVER: Cast iron MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

25 20 15 10

A=SFE-750 B=SFE-1100 C=SFE-1500 D=SFE-2200(1) E=SFE-2200(2) F=SFE-3000(1) G=SFE-3000(2) H=SFE-3000(3)

PUMP BODY: Cast iron IMPELLER: Brass FRONT COVER: Cast iron MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request are available on request. You could customize special requirements before placing order.

PERFORMANCE CURVE
H (m) 90

75 60 45 30 15 0

A=SFF-750(2) B=SFF-1100(2) C=SFF-1500(2) D=SFF-2200(2) E=SFF-3000(2) F=SFF-4000(2) G=SFF-5500(2)

B
5 0

200

400

600

800

1000

1200

1400

1600
Q(L/min)

50

100

150

200

250

300

350

400
Q(L/min)

TECHNICAL DATA
Power Model SFE-750 SFE-1100 SFE-1500 SFE-2200(1) SFE-2200(2) SFE-3000(1) SFE-3000(2) SFE-3000(3) HP 1 1.5 2 3 3 4 4 4 KW 0.75 1.1 1.5 2.2 2.2 3 3 3 R.P.M 2850 2850 2850 2850 2850 2850 2850 2850 H.Max (m) 14 20 20 20 18 22 22 22 Q.Max (L/min) 400 450 500 650 780 1000 1200 1400 S.Head (m) 8 8 8 8 8 8 8 8 Pipe Dia 2"X2" 2"X2" 2"X2" 2"X2" 3"X3" 2"*2" 3"X3" 4"X4"

TECHNICAL DATA
Power Model SFF-750(2) SFF-1100(2) SFF-1500(2) SFF-2200(2) SFF-3000(2) SFF-4000(2) SFF-5500(2) HP 1 1.5 2 3 4 5.5 7.5 KW 0.75 1.1 1.5 2.2 3 4 5.5 R.P.M 2850 2850 2850 2850 2850 2850 2850 H.Max (m) 40 47 54 60 65 70 75 Q.Max (L/min) 75 100 110 150 200 250 300 S.Head (m) 8 8 8 8 8 8 8 Pipe Dia 1"x1" 11 4 "x1" 11 4 "x1"
1 11 2 "x12 " 1 11 2 "x12 "

2"x2" 2"x2"

08

SF is Product ID of ELEPHANT CLASS series.

SF is Product ID of ELEPHANT CLASS series.

09

SFG STAINLESS CENTRIFUGAL PUMPS SERIES

SFH SELF-PRIMING JET PUMPS SERIES

SFG SERIES
STAINLESS CENTRIFUGAL PUMPS SERIES
INSTALLATION AND APPLICATION
For their reliable performance, they are particular suitable for domestic use, agriculture and irrigating garden. No rust, no corrosion, stainless steel pump body, stainless steel impeller offer save water to you.

SFH SERIES
INSTALLATION AND APPLICATION OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

SELF-PRIMING JET PUMPS SERIES

Self-priming jet pumps are designed for suction lifts and can be installed above the water source, including applications with air entrained in the water. Reliable and low maintenance, they are suitable for domestic use, for distributing and garden irrigation, etc.

OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

STRUCTURAL CHARACTERISTICS
PUMP BODY: Stainless steel IMPELLER: Stainless steel / brass FRONT COVER: Aluminum and stainless steel MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

PERFORMANCE CURVE
H (m) 60

STRUCTURAL CHARACTERISTICS
A=SFG-370 B=SFG-550 C=SFG-750 D=SFG-1100 E=SFG-1500

PERFORMANCE CURVE
H (m) 70

50 40 30 20

B
10 0

20

40

60

80

100

120

140

160
Q(L/min)

PUMP BODY: Cast iron IMPELLER: Brass FRONT COVER: Cast iron DIFFUSER: Nylon or cast iron MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

60 50 40 30 20 10 0

A=SFH-370 B=SFH-550 C=SFH-750 D=SFH-1100 E=SFH-1500

B A C D E

10

20

30

40

50

60

70

80
Q(L/min)

TECHNICAL DATA
Power Model HP SFG-370 SFG-550 SFG-750 SFG-1100 SFG-1500 0.5 0.75 1 1.5 2 KW 0.37 0.55 0.75 1.1 1.5 2850 2850 2850 2850 2850 20 26 30 35 40 75 85 110 120 140 9 9 9 9 9 1"X1" 1"X1" 1"X1" 1"X1" 1"X1" R.P.M H.Max (m) Q.Max (L/min) S.Head (m) Pipe Dia

TECHNICAL DATA
Power Model HP SFH-370 SFH-550 SFH-750 SFH-1100 SFH-1500 0.5 0.75 1 1.5 2 KW 0.37 0.55 0.75 1.1 1.5 2850 2850 2850 2850 2850 35 40 45 55 62 40 45 50 70 80 9 9 9 9 9 1"X1" 1"X1" 1"X1" 1"X1" 1"X1" R.P.M H.Max (m) Q.Max (L/min) S.Head (m) Pipe Dia

10

SF is Product ID of ELEPHANT CLASS series.

SF is Product ID of ELEPHANT CLASS series.

11

SFI SELF-PRIMING JET PUMPS SERIES

SFJ SELF-PRIMING JET PUMPS SERIES

SFI SERIES
INSTALLATION AND APPLICATION OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

SELF-PRIMING JET PUMPS SERIES

SFJ SERIES
INSTALLATION AND APPLICATION OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

SELF-PRIMING JET PUMPS SERIES

Self-priming jet pumps are designed for suction lifts and can be installed above the water source, including applications with air entrained in the water. Reliable and low maintenance, they are suitable for domestic use, distributing and garden irrigation, etc.

Self-priming jet pumps are designed for suction lifts and can be installed above the water source, including applications with air entrained in the water. Reliable and low maintenance, they are suitable for domestic use, distributing and garden irrigation, etc.

STRUCTURAL CHARACTERISTICS
PUMP BODY: Cast iron IMPELLER: Brass FRONT COVER: Cast iron DIFFUSER: Nylon or cast iron MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

PERFORMANCE CURVE
H (m) 70

STRUCTURAL CHARACTERISTICS
A=SFI-370 B=SFI-550 C=SFI-750 D=SFI-1100 E=SFI-1500

PERFORMANCE CURVE
H (m) 70

60 50 40 30 20

PUMP BODY: ABS IMPELLER: Brass/Nylon FRONT COVER: Nylon/Aluminum MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

60 50 40 30 20 10 0 0 10 20 30 40 50

A=SFJ-370P B=SFJ-550P C=SFJ-750P D=SFJ-1100P E=SFJ-1500P

A
10 0

10

20

30

40

50

60

70

80
Q(L/min)

60

70

Q(L/min)

80

TECHNICAL DATA
Power Model HP SFI-370 SFI-550 SFI-750 SFI-1100 SFI-1500 0.5 0.75 1 1.5 2 KW 0.37 0.55 0.75 1.1 1.5 2850 2850 2850 2850 2850 35 40 45 55 62 40 45 50 70 80 9 9 9 9 9 1"X1" 1"X1" 1"X1" 11 4 "X1"/1"X1" 11 4 "X1"/1"X1" R.P.M H.Max (m) Q.Max (L/min) S.Head (m) Pipe Dia

TECHNICAL DATA
Power Model HP SFJ-370P SFJ-550P SFJ-750P SFJ-1100P SFJ-1500P 0.5 0.75 1 1.5 2 KW 0.37 0.55 0.75 1.1 1.5 2850 2850 2850 2850 2850 35 40 45 55 62 40 45 50 70 80 9 9 9 9 9 1"X1" 1"X1" 1"X1" 1"X1" 1"X1" R.P.M H.Max (m) Q.Max (L/min) S.Head (m) Pipe Dia

12

SF is Product ID of ELEPHANT CLASS series.

SF is Product ID of ELEPHANT CLASS series, suffix P stands for plastic pump body.

13

SFK STAINLESS SELF-PRIMING JET PUMPS SERIES

SFL DEEP WELL AUTOMATIC PUMPS SERIES

SFK SERIES
STAINLESS SELF-PRIMING JET PUMPS SERIES
INSTALLATION AND APPLICATION
Self-priming jet pumps are designed for suction lifts and can be installed above the water source, including applications with air entrained in the water. Reliable and low maintenance, they are suitable for domestic use, distributing and garden irrigation, etc.

SFL SERIES
DEEP WELL AUTOMATIC PUMPS SERIES
INSTALLATION AND APPLICATION
Reliable efficiency, these deep well pumps with high suction. It is suitable for drawing water from deep well or industrial pools. These series are recommended for domestic, agricultural and industrial applications.

OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

STRUCTURAL CHARACTERISTICS
PUMP BODY: Stainless steel IMPELLER: Stainless steel/Brass/PPO FRONT COVER: Nylon/Aluminum MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS:are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

PERFORMANCE CURVE
H (m) 60

STRUCTURAL CHARACTERISTICS
A=SFK-370S B=SFK-550S C=SFK-750S

50 40 30 20 A 10 B C

PUMP BODY: Cast iron IMPELLER: Brass FRONT COVER: Cast iron MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

10

20

30

40

50

60
Q(L/min)

TECHNICAL DATA
Power Model HP SFK-370S 0.5 KW 0.37 2850 35 40 9 1 X1 R.P.M H.Max (m) Q.Max (L/min) S.Head (m) Pipe Dia

TECHNICAL DATA
Model SFL-370A/B SFL-550A/B SFL-750A/B Power HP 0.5 0.75 1 KW 0.37 0.55 0.75 Total head M 30 40 50 Ampere 1~220V 2.1 3.5 4.6 Pipe Dia 11 4 "X1"X1" 11 4 "X1"X1" 11 4 "X1"X1" 11 4 "X1"X1" Ejector Type E20 E20 E30 E20 E30 E30 E20 E30 E30 E20 E20 E30 E30 Suct.Depth (m) 10 15 20 15 20 30 15 20 30 15 25 35 45 Capacity L/min-At discharge head m 10m 40 34 17 15m 34 20 13 38 30 21 45 38 29 56 50 26 16 25m 12 5 7 24 17 12 38 28 22 48 41 20 12 35m 35m

SFK-550S

0.75

0.55

2850

40

45

1 X1

SFK-750S

0.75

2850

45

50

1 X1

SFL-1100A/B

1.5

1.1

60

6.4

SF is Product ID of ELEPHANT CLASS series, suffix s stands for stainless steel pump.

15 10 7 23 12 8 35 28 15 10

25 17 10 7

14

SF is Product ID of ELEPHANT CLASS series, A stands for automatic, with pressure boosting system, while B is without pressure tank.

15

SFM HORIZONTAL MULTI-STAGE CENTRIFUGAL PUMPS SERIES

AUTOMATIC WATER PUMPS SERIES

AUTOMATIC WATER PUMP SERIES


INSTALLATION AND APPLICATION
The AUTO series pumps are suitable for distributing water in combination with an automatic control system, they are recommended for domestic use, garden irrigation, pressure boosting, etc.

SFM SERIES
INSTALLATION AND APPLICATION
PERFORMANCE CURVE
100

HORIZONTAL MULTI-STAGE CENTRIFUGAL PUMPS SERIES


OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45 SFM series multistage centrifugal pumps - stainless steel pump body, and nylon diffusers reinforced with fiberglass. Max working pressure 11bar.

2850 min.-1 - 50Hz Total dynamic head H(m) 80

60

MODEL: AUTO SFC-370/550/750

MODEL: AUTO SFD-370/550/750

MODEL: AUTO SFM 50/60/70/80/100/120

40

20

40

80

120

160

200
Q(L/h)

TECHNICAL DATA
Model 1~ 220V 50Hz SFM 50/2 SFM 60/3 SFM 70/4 SFM 80/3 SFM 100/4 SFM 120/5 SFM 80/3A SFM 100/4A SFM 120/5A SFM 200/4 SFM 250/5 SFM 300/6 3~ 220V/380V 50Hz SFM 50/2 T SFM 60/3 T SFM 70/4 T SFM 80/3 T SFM 100/4 T SFM 120/5 T SFM 80/3A T SFM 100/4A T SFM 120/5A T SFM 200/4 T SFM 250/5 T SFM 300/6 T P2 no m. 0.5 0.6 0.7 0.8 1 1.2 0.8 1 1.2 2 2.5 3 P2 nom. KW 0.37 0.45 0.51 0.59 0.74 0.88 0.59 0.74 0.88 1.5 1.85 2.2 1~ 0.51 0.65 0.83 0.83 1.07 1.27 0.83 1.07 1.27 1.95 2.45 2.8 P2 nom. 3~ 0.5 0.65 0.85 0.88 1.1 1.33 0.88 1.1 1.33 1.8 2.35 2.6 Ampere 1~ 3~ 1x220V 3x380V 2.4 1 3.1 1.1 3.8 1.6 3.8 1.6 5 1.9 6.1 2.3 3.8 1.6 5 1.9 6.1 2.3 9.7 3.2 11 3.8 13.2 4.5 m3/h 0 L/min 0 1.2 20 2.4 40 3.6 60 Q=Capacity 6 4.8 100 80 7.2 120 8.4 140 9.6 160

Total head in meters w.c. 20.5 30.1 38 34 45.5 56 34 45.5 56 55 68.5 82.5 17.5 26 32 29.5 40 51.5 29.5 40 51.5 53.5 67 80 13 19.5 24.5 25 34 44.5 25 34 44.5 52 64.5 77 7.5 11.5 14.5 18.5 26 35 18.5 26 35 48.5 62 71.5

MODEL: AUTO SFK-370S/550S/750S


13 18 22 13 18 22 46.5 58.5 70

MODEL: AUTO SFI-370/550/750

PRESSURE KITS:

Pressure tank Pressure switch Pressure gauge

Pressure range: 1.0kg~1.8kg Pressure range: 1.0~1.8kg, 1.4~2.8kg , 2~3.2kg D=41mm~50mm L=30mm~70mm 3-way, 5-way

42.5 53.5 61.5

38 48 57

31.5 39 47.5

23 30 36

Stainless Steel fiber hose Bronze tee SF is Product ID of ELEPHANT CLASS series, suffix A stands for Automatic.

16

SF is Product ID of ELEPHANT CLASS series, outlet inch "x ", 1"x1", 1 "x 1 ", 1 "x1 " are all available.

17

SFN SWIMMING POOL WATER PUMPS SERIES

SFO OIL PUMPS SERIES

SFN SERIES
SWIMMING POOL WATER PUMPS SERIES
INSTALLATION AND APPLICATION
SFN series are designed for swimming pool and can be installed above the water source, including applications with air entrained in the water. Reliable and low maintenance, they are suitable for domestic use, distributing and garden irrigation, etc.

SFO SERIES
OIL PUMPS SERIES
INSTALLATION AND APPLICATION
SFO series are designed for water and clean oil except petrol. Reliable and low maintenance, they are suitable for domestic use and industrial applications, such as water supply for recirculation of air conditions and refrigerators, industrial water uses in general, and the automatic distribution of water from surge tanks, watering gardens, lifting water from tanks or wells down to 9M depth. These pumps should be installed in a covered area, protected against the weather.

OPERATING LIMITS
Max Suction: 9M Max Liquid Temperature: 50 Max Ambient Temperature: +45

STRUCTURAL CHARACTERISTICS
PUMP BODY: ABS IMPELLER: PPO FRONT COVER: Nylon/Aluminum MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

PERFORMANCE CURVE H 20 (m)

OPERATING LIMITS
Max Suction: 9M Max Ambient Temperature: +45
A=SFN-370 B=SFN-550 C=SFN-750 D=SFN-1100 E=SFN-1500

PERFORMANCE CURVE
H (m)35

STRUCTURAL CHARACTERISTICS
PUMP BODY: Cast iron I MPELLER: Brass FRONT COVER: Cast iron MECHANICAL SEAL SETS: Ceramic, graphite and rubber MOTOR: The pumps are synchronous directly connected, high efficiency SILVER ELEPHANT induction motor of suitable size, which is quiet running, close and extremely ventilated, suitable for continuous duty. The thermal protector is cooperated with single phase motor according to current standards. INSULATION: Class B/F PROTECTION: IP44/54 CONSTRUCTION AND SAFETY STANDARDS: are in compliance with IEC. 220V/50Hz.60Hz 110V/50Hz.60Hz and three phase are available on request. You could customize special requirements before placing order.

15

30 25 20 15
A C B

A=SFO-370 B=SFO -550 C=SFO -750

10
A B C D E

10 5 0 10 20 30 40 50
Q(L/h)

50

100

150

200

250

Q(L/min)

TECHNICAL DATA TECHNICAL DATA


Power Model HP SFN-370 SFN-550 SFN-750 SFN-1100 SFN-1500 0.5 0.75 1 1.5 2 KW 0.37 0.55 0.75 1.1 1.5 2850 2850 2850 2850 2850 12 14 16 18 20 160 200 220 240 260 7 7 7 7 7
1 11 2 "X12 " 1 11 2 "X12 " 1 11 2 "X12 "

R.P.M

H.Max (m)

Q.Max (L/min)

S.Head (m)

Pipe Dia Model HP SFO-370 0.5

Power R.P.M KW 0.37 2850

H.Max (m)

Q.Max (L/min)

S.Head (m)

Pipe Dia

21

40

1"X1"

SFO -550

0.75

0.55

2850

31

50

1"X1"

2"X2" 2"X2" SFO -750 1 0.75 2850 35 55 9 1"X1"

18

SF is Product ID of ELEPHANT CLASS series.

SF is Product ID of ELEPHANT CLASS series.

19

SFN SUBMERSIBLE PUMPS SERIES

SFQ SUBMERSIBLE PUMPS SERIES

SFP SERIES
INSTALLATION AND APPLICATION

SUBMERSIBLE PUMPS SERIES

SFQ SERIES
INSTALLATION AND APPLICATION
PERFORMANCE CURVE
H (m)12
A=SFP-250P B=SFP-400P C=SFP-550P D=SFP-750P E=SFP-900P F=SFP-250PW G=SFP-400PW H=SFP-550PW I=SFP-750PW J=SFP-900PW

SUBMERSIBLE PUMPS SERIES

SFP P series are suitable for draining clean water without abrasive particles. They are able to drain underwater. SFP PW series are suitable for draining dirty water, so they are recommended for emergent draining of small flooded area (room, cellar, garage), and other domestic usages.

SFQ S series are suitable for draining clean water without abrasive particles. They are able to drain underwater. SFQ SW series are suitable for draining dirty water, so they are recommended for emergent draining of small flooded areas (room, cellar, garage), and other domestic usages.

PERFORMANCE CURVE
H (m)12 A=SFQ-400S B=SFQ -550S C=SFQ -750S D=SFQ -900S E=SFQ -1100S F=SFQ -400SW G=SFQ -550SW H=SFQ-750SW I=SFQ -900SW J=SFQ-1100SW

OPERATING LIMITS
Max Liquid Temperature: 50 Max Ambient Temperature: +45

10 8 6 4 2 0 2000
B G F H D C J I

10

OPERATING LIMITS
Max Liquid Temperature: 50oC Max Ambient Temperature: +45 oC 8 6 4 2 0 4000 6000
B G F H D

E J

STRUCTURAL CHARACTERISTICS
PUMP BODY: PPGF30 HOSE JOINT: PPGF30 IMPELLER: PPGF30 EXTERNAL FLOAT SWITCH: PPGF30 MECHANICL SEAL: Ceramic, graphite and rubber

STRUCTURAL CHARACTERISTICS
PUMP BODY: Stainless Steel SUCTION STRAINER: Stainless Steel IMPELLER: PPGF30 EXTERNAL FLOAT SWITCH: For automatic pump operation MECHANICL SEAL: Ceramic, graphite and rubber
Q(L/h)

I C

4000

6000

8000

10000

12000

8000

10000

12000

14000

Q(L/h)

TECHNICAL DATA
Power Model HP SFP-250P SFP-400P SFP-550P SFP-750P SFP-900P SFP-250PW SFP-400PW SFP-550PW SFP-750PW SFP-900PW 0.35 0.55 0.75 1 1.2 0.35 0.55 0.75 1 1.2 KW 0.25 0.4 0.55 0.75 0.9 0.25 0.4 0.55 0.75 0.9 1~220 1 1.4 2.5 3.4 4 1 1.4 2.5 3.4 4 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 6 6.5 8 9 10 5 6 6.5 7.5 8.5 6000 6500 8000 12000 13000 5000 6000 7000 11000 12000 1",11 4" 1",14 " 1",14 " 1",14 " 1",11 4" 1",11 4" 1",11 4" 1",11 4" 1",11 4" 1",11 4"
1 1 1

TECHNICAL DATA
Ampere R.P.M H.Max (m) Q.Max (L/min) Power Pipe Dia Model HP SFQ-400S SFQ -550S SFQ -750S SFQ -900S SFQ -1100S SFQ -400SW SFQ -550SW SFQ-750SW SFQ -900SW SFQ-1100SW 0.55 0.75 1 1.2 1.5 0.55 0.75 1 1.2 1.5 KW 0.4 0.55 0.75 0.9 1.1 0.4 0.55 0.75 0.9 1.1 1~220 1.4 2.5 3.4 4 5.2 1.4 2.5 3.4 4 5.2 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 7 8 9 10 11 6.5 7.5 8 9 11 7000 8000 12000 13000 15000 7000 8000 12000 13000 15000 1",11 4" 1",14 " 1",14 " 1",14 " 1",11 4" 1",11 4" 1",11 4" 1",11 4" 1",11 4" 1",11 4"
1 1 1

Ampere R.P.M

H.Max (m)

Q.Max (L/min)

Pipe Dia

20

SF is Product ID of ELEPHANT CLASS series, suffix P stands for plastic pump body, only for clean water; suffix PW for dirty water.

SF is Product ID of ELEPHANT CLASS series, suffix S stands for stainless steel pump body just for clean water; suffix SW for dirty water.

21

SFR SUBMERSIBLE CLEAN PUMPS SERIES

SFS SUBMERSIBLE SEWAGE PUMPS SERIES

SFR SERIES
SUBMERSIBLE CLEAN PUMPS SERIES
INSTALLATION AND APPLICATION
SFR series pump is composed of motor, pump, mechanical seal, and thermal protector. They are recommended for emergent draining of small flooded areas (room, cellar, garage), and drain water from well, irrigation, building construction and garden.

SFS SERIES
INSTALLATION AND APPLICATION

SUBMERSIBLE SEWAGE PUMPS SERIES

SFS series pumps are designed for draining clean or dirty water, they are suitable for domestic use, draining flooded areas such as cellars and emptying pools.

PERFORMANCE CURVE
H (m)21 A=SFS-550A/B B=SFS-750A/B C=SFS-1100A/B D=SFS-1100A/B E=SFS-150A0/B F=SFS-2200A/B

OPERATING LIMITS
Max Liquid Temperature: 50 Max Ambient Temperature: +45

OPERATING LIMITS
Max Liquid Temperature: 50 Max Ambient Temperature: +45

18 15 12 9 6 3 0 160 320 480 640


A B C D E

STRUCTURAL CHARACTERISTICS
PUMP BODY: Aluminum/Cast iron SUCTION STRAINER: Cast iron IMPELLER: Aluminum /Cast iron EXTERNAL FLOAT SWITCH: For automatic pump operation MECHANICL SEAL: Ceramic, graphite and rubber

STRUCTURAL CHARACTERISTICS
PUMP BODY: Cast iron SUCTION STRAINER: Cast iron IMPELLER: Cast iron EXTERNAL FLOAT SWITCH: For automatic pump operation MECHANICL SEAL: Ceramic, graphite and rubber

800

960

Q(L/h)

TECHNICAL DATA
Model SFR-370A SFR-550A(1) SFR-550A(2) SFR-550A(3) SFR-750A(1) SFR-750A(2) SFR-750A(3) SFR-750A(4) SFR-1100A SFR-1500A(1) SFR-1500A(2) SFR-400B SFR-600B(1) SFR-600B(2) SFR-600B(3) SFR-850B(1) SFR-850B(2) SFR-850B(3) SFR-850B(4) Q.Max (m 3/h) 1.5 3 7 12 1.5 7 10 25 30 15 40 1.5 3 8 15 1.5 8 10 15 H.Max (m) 17 20 14 10 32 20 15 10 10 20 9 18 23 15 8 35 20 18 12 Power (KW) 0.37 0.55 0.55 0.55 0.75 0.75 0.75 0.75 1.1 1.5 1.5 0.4 0.6 0.6 0.6 0.85 0.85 0.85 0.85 V.Hz 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50 R.P.M (r/min) 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 Pipe Dia (mm) 25 25 40 51 25 40 51 64 76 64 76 25 25 40 51 25 40 51 64

TECHNICAL DATA
Model 1/phase SFS-550A SFS-750A SFS-1100A SFS-1100A 3/phase SFS-550B SFS-750B SFS-1100B SFS-1100B SFS-1500RB SFS-150A SFS-2200A SFS-1500B SFS-2200B Power volt 230 4.5 5 8 8 Q.Max 1/phase HP 0.75 1 1.5 1.5 2 2 3 KW 0.55 0.75 1.1 1.1 1.5 1.5 2.2 14 14 40 40 uf 16 20 25 31.5 3/phase volt 230V 2.2 3.1 4 4.3 6.4 6.4 9.5 uf 1.4 1.9 3 3 3.8 3.8 5.2 TOTAL MANOMETRIC HEAD METERS 2mt 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 0.2 bar 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 CAPACITY L/min 365 336 300 265 330 190 155 120 80 40 420 385 350 315 280 240 205 165 125 85 45 510 505 480 455 435 400 375 335 295 280 215 160 110 50 705 670 630 590 545 495 450 405 355 305 250 195 140 85 50 20 570 560 545 525 515 510 490 450 420 395 335 285 225 185 120 55 820 780 780 700 655 610 560 515 460 410 350 290 225 155 90 50 25 945 915 875 840 795 745 595 640 585 530 470 410 340 280 200 130 75 35

22

SF is Product ID of ELEPHANT CLASS series, suffix A stands for aluminum pump body, suffix B stands for cast iron pump body.

SF is Product ID of ELEPHANT CLASS series, suffix A stands for single phase, suffix B stands for three phase;

23

SFT SUBMERSIBLE SEWAGE PUMPS SERIES

SFT SUBMERSIBLE SEWAGE PUMPS SERIES

TECHNICAL DATA
Model SFT-3000(1) SFT-3000(2) SFT-3000(3) SFT-3000(4) SFT-4000(1) SFT-4000(2) SFT-4000(3) Q.Max (m 3/h) 10 15 25 50 10 30 60 10 15 65 80 100 100 130 300 10 130 180 250 100 180 250 100 180 130 300 400 180 250 400 600 200 350 600 400 600 800 600 800 1100 1760 600 800 1500 H.Max (m) 50 30 24 10 60 26 10 70 40 18 15 10 25 15 7 30 20 15 11 35 20 15 40 25 30 15 10 30 22 13 9 30 25 12 30 15 12 20 15 10 7.5 25 20 10 Power (KW) 3 3 3 3 4 4 4 5.5 5.5 5.5 7.5 7.5 11 11 11 15 15 15 15 18.5 18.5 18.5 22 22 22 22 22 30 30 30 30 37 37 37 45 45 45 55 55 55 55 75 75 75 Voltage (r/min) 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 380/660 R.P.M (r/min) 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 Pipe Dia 51 51 64 76 51 76 102 51 51 102 102 152 100 150 200 100 150 150 200 100 150 200 100 150 150 200 200 150 200 200 250 150 200 250 200 250 250 250 300 300 300 300 300 400

SFT SERIES
INSTALLATION AND APPLICATION OPERATING LIMITS
Max Liquid Temperature: 50 C Max Ambient Temperature: +45 oC
o

SFT-5500(1) SFT-5500(2) SFT-5500(3) SFT-7500(1) SFT-7500(2) SFT-11000(1) SFT-11000(2) SFT-11000(3) SFT-15000(1) SFT-15000(2) SFT-15000(3) SFT-15000(4) SFT-18500(1) SFT-18500(2) SFT-18500(3) SFT-22000(1) SFT-22000(2) SFT-22000(3)

SUBMERSIBLE SEWAGE PUMPS SERIES

SFT series pumps own the functions of avoiding the mud, preventing the sand choking pump with special impeller and durable mechanical seal set. These pumps are suitable for building construction, hospital, hotel, flooded area, cellar and agriculture irrigation, etc.

STRUCTURAL CHARACTERISTICS
PUMP BODY: Cast iron SUCTION STRAINER: Cast iron IMPELLER: Cast iron MECHANICL SEAL: Ceramic, graphite and rubber

TECHNICAL DATA
Model SFT-400 SFT-750(1) SFT-750(2) SFT-750(3) SFT-750(4) SFT-1100(1) SFT-1100(2) SFT-1100(3) SFT-1100(4) SFT-1100(5) SFT-1100(6) SFT-1500(1) SFT-1500(2) SFT-2200(1) SFT-2200(2) SFT-2200(3) Q.Max (m 3/h) 7.8 10 10 8 10 8 8 10 10 15 15 15 25 10 15 20 45 H.Max (m) 6.5 10 10 18 10 26 26 15 15 10 10 15 10 36 20 18 9 Power (KW) 0.4 0.75 0.75 0.75 0.75 1.1 1.1 1.1 1.1 1.1 1.1 1.5 1.5 2.2 2.2 2.2 2.2 Voltage (r/min) 220 220 380 220 220 220 380 220 380 220 380 380 380 380 380 380 380 R.P.M (r/min) 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 Pipe Dia 51 51 51 40 51 40 40 51 51 64 64 51 64 51 51 64 76

SFT-22000(4) SFT-22000(5) SFT-30000(1) SFT-30000(2) SFT-30000(3) SFT-30000(4) SFT-37000(1) SFT-37000(2) SFT-37000(3) SFT-45000(1) SFT-45000(2) SFT-45000(3) SFT-55000(1) SFT-55000(2) SFT-55000(3) SFT-55000(4) SFT-75000(1) SFT-75000(2) SFT-75000(3)

24

SFT-2200(4)

SF is Product ID of ELEPHANT CLASS series.

25

You might also like