Professional Documents
Culture Documents
Introduction
CIGWELD Professional: When welding is your business
At CIGWELD we distinguish ourselves from our competition through superior featured, dependable products, technical innovation and excellence in customer service and technical support. Our Professional Inverter range is proof of this commitment to deliver quality equipment that exceeds expectations. A wealth of features and options make this equipment the perfect choice for the serious welding professional.
CONTENTS
Portable Inverter Power Source Features & Benefits Key to icons TRANSARC 141 VRD TRANSARC 161 VRD TRANSTIG 200Pi Power Source & Plant TRANSTIG 300Pi Power Source TRANSTIG 200AC/DC Power Source & Plant 3 3 4 5 6 7 8 9 10 11 12 13
TRANSTIG 300AC/DC Power Source TRANSARC 300Si Power Source TRANSMIG 400i Power Source Optional Accessories Details Portable Inverter Specifications
Thermal overload protection for long life of internal components Programmable memory Save/Load and recall optimum welding parameters
8/14 pin socket Torch slider control Remote foot control Remote pendant control Wirefeeders (400i only)
Portable, ultra lightweight, heavy duty robust design & construction Designed for multi-layer stacking with similar sized machines
AS1674.2 compliant for Category A, B & C environments AS60974.1 IP 23S rating designed & approved for outdoor use
N1890
KEY TO ICONS
200
AMP
DC CC
HF
Output voltage (DC or AC) or combination Output characteristic (CC or CV) or combination High frequency start
240
V PHASE
Input voltage
Portable Inverters
CC
DC
PHASE
240 140
V AMP
Features
Compliant integrated Voltage Reduction Device Designed for AS1674.2 category A, B & C environments; EMC compliant Embedded microprocessor with digital controls Exceptional DC welding characteristics Stick, Lift TIG & Pulse Lift TIG weld operations Single index control knob Compact, lightweight & portable The TRANSARC 141 VRD is a single phase stick (MMAW) and lift TIG (GTAW) inverter welding power source that incorporates a Voltage Reduction Device (VRD) as a standard feature. The integral VRD in the manual arc welding mode offers much needed protection for the welding operator from electric shock during nonPower Source Part No. 625775
Ordering Information
TRANSARC 141 VRD power source TRANSARC 141 VRD plant 625775 625779
arcing times. Additionally, the application of state of the art digital and microprocessor technology ensures superior arc characteristics especially during the critical arc starting and re-strike phases. Please refer to specifications at rear of brochure for comprehensive information.
Optional Accessories
Manual arc lead set 165 amp TIG torch TIG torch accessories kit Torch gas hose kit (includes fittings) Flowmeter/regulator Dinse plug connector Work lead (4m) 6 pin & earth plug 4 646323 404710402 BGSAK2 700433 301526 705152 700638 700738
Plant Contents
141 VRD power source 5m work lead 5m electrode lead Soft carry case Operating manual
Plant Part No. 625779
Portable Inverters
CC DC
PHASE
240 160
V AMP
Features
Compliant integrated Voltage Reduction Device Designed for AS1674.2 category A, B & C environments; EMC compliant Embedded microprocessor with digital controls Exceptional DC welding characteristics Stick, Lift TIG & Pulse Lift TIG weld operations Single index control knob Compact, lightweight & portable The TRANSARC 161 VRD is a single phase stick (MMAW) and Lift TIG (GTAW) inverter welding power source that incorporates a Voltage Reduction Device (VRD) as a standard feature. The integral VRD in the manual arc welding mode offers much needed protection for the welding operator from electric shock during nonPower Source Part No. 625779
Ordering Information
TRANSARC 161 VRD power source TRANSARC 161 VRD plant 625799 625802
arcing times. Additionally, the application of state of the art digital and microprocessor technology ensures superior arc characteristics especially during the critical arc starting and re-strike phases. Please refer to specifications at rear of brochure for comprehensive information.
Optional Accessories
Manual arc lead set 165 amp TIG torch TIG torch accessories kit Torch gas hose kit (includes fittings) Flowmeter/regulator Dinse plug connector Work lead (4m) 6 pin & earth plug 646323 404710402 BGSAK2 700433 301526 705152 700638 700738
Plant Contents
161 VRD power source 5m work lead 5m electrode lead Soft carry case Operating manual
Plant Part No. 625802
Portable Inverters
HF
CC DC
PHASE
240 200
V AMP
Supply Voltage
Features
Embedded micro-processor with digital controls Intelligent heat sensing fan operates on demand Easy to use digital display and panel control HF start TIG, Lift TIG & MMAW modes 2T, 4T with up/down slope and repeat function Intelligent self diagnostic control Save/Load (Recall) weld programs The TRANSTIG 200Pi is a 240 volt full digital control, DC stick/Lift TIG, HF TIG power source. Loaded with features like high frequency start, lift arc start, up/down slope, pulse DC, repeat (latch) function, DC pulse and spot mode, youve got the ultimate unit designed for precision TIG and MMAW of stainless steel and
Power Source Part No. 700720
Ordering Information
TRANSTIG 200Pi power source TRANSTIG 200Pi plant 700720 700730
other DC weldable materials. Please refer to specifications at rear of brochure for comprehensive information.
Plant Contents
OTD10/4013 OTD10/4014 OTD10/4016 UOA706900 TRANSTIG 200Pi power source 17 series TIG torch, 4m lead with remote current control 5m work lead 5m electrode holder COMET Argon regulator, 0-55 lpm 2 gauge Gas hose for TIG torch TIG accessory kit Plant storage and carry case Operating manual
Plant Part No. 700730
Optional Accessories
Slide control Hand pendant Foot control 8 pin plug
Portable Inverters
HF
CC DC
PHASE
415 300
V AMP
30% @ 300 amps (GTAW 40C) Min. Recommended Generator Power Source Weight 24kg Dimensions
Features
Compliant integrated Voltage Reduction Device Embedded micro-processor with digital controls Intelligent heat sensing fan operates on demand Easy to use digital display and panel control HF start TIG, Lift TIG & MMAW modes 2T, 4T with up/down slope and repeat function Intelligent self diagnostic control Save/Load (Recall) weld programs Fully adjustable weld parameters
Ordering Information
TRANSTIG 300Pi power source 700722
The TRANSTIG 300Pi is a 415 volt, full digital control, DC stick/Lift TIG, HF TIG
power source. With features like high frequency start, lift arc start, up/down slope, welding program save/recall, pulse DC, repeat (latch) function, DC pulse and spot mode, youve got the ultimate unit designed for precision TIG and MMAW of stainless steel and other DC weldable materials.
Optional Accessories
Slide control Hand pendant Foot control TIG torch (4m) Torch accessories kit Gas hose Flowmeter/regulator Lead set (8m) 14 pin plug OTD10/2004 OTD10/2005 OTD10/2007 538720401 BGSAK2 700433 301526 646325 7977710 7 Please refer to specifications at rear of brochure for comprehensive information.
Portable Inverters
TRANSTIG 300Pi TRANSTIG 200AC/DC TRANSTIG 300AC/DC TRANSARC 300Si TRANSMIG 400i
Specifications
Processes Lift TIG, HF TIG (GTAW); Stick (MMAW) Supply Voltage Current Range Duty Cycle 240 volt, 1 phase, 50/60Hz 5 200 amps (TIG) 20% @ 200 amps (GTAW, 40C) Recommended Generator 8.8 kVA for max. welding current Power Source Weight 19kg Dimensions 180 W x 360 H x 420 D mm
HF
CC
AC DC
PHASE
240 200
V AMP
Features
Compliant integrated Voltage Reduction Device Embedded micro-processor with digital controls Intelligent heat sensing fan operates on demand Easy to use digital display and panel control HF start TIG, Lift TIG & MMAW modes 2T, 4T with up/down slope and repeat function Intelligent self diagnostic control Save/Load (Recall) weld programs
Power Source Part No. 700719
The TRANSTIG 200AC/DC is a fully upgraded 240 volt, full digital control, AC/DC stick/Lift TIG, HF TIG Inverter power source. Featuring high frequency start, lift arc start, up/down slope, pulse on AC or DC, repeat (latch) function, DC pulse and spot mode, youve got the ultimate unit designed for precision TIG and MMAW of stainless steel and other DC weldable materials. Ideally suited for 700719 700735 light fabrication and maintenance of aluminium and stainless steel. Please refer to specifications at rear of brochure for comprehensive information.
Ordering Information
TRANSTIG 200AC/DC power source TRANSTIG 200AC/DC plant
Plant Contents
OTD10/4013 OTD10/4014 OTD10/4016 UOA706900 TRANSTIG 200AC/DC power source 26 series TIG torch, 4m lead with remote current control 5m work lead 5m electrode holder COMET Argon regulator, 0-55 lpm 2 gauge Gas hose for TIG torch TIG accessory kit Plant storage and carry case Operation manual
Plant Part No. 700735
Optional Accessories
Slide control Hand pendant Foot control 8 pin plug
Specifications
Processes
Lift TIG, HF TIG (GTAW); Stick (MMAW) Supply Voltage Current Range 5 300 amps Duty Cycle 25% @ 300 amps (GTAW 40C) Recommended Generator 16 kVA for max. welding current Power Source Weight 24kg Dimensions 210 W x 420 H x 450 D mm 415 volt, 3 phase, 50/60Hz
Portable Inverters
HF
CC
AC DC
PHASE
415 300
V AMP
Features
Compliant integrated Voltage Reduction Device Save/Load (Recall) weld programs Embedded micro-processor with digital controls Intelligent heat sensing fan operates on demand Easy to use digital display and panel control HF start TIG, Lift TIG & MMAW modes 2T, 4T with up/down slope and repeat function Intelligent self diagnostic control
Power Source Part No. 700723
Ordering Information
TRANSTIG 300AC/DC power source 700723
The TRANSTIG 300AC/DC is a 415 volt, full digital control, AC/DC stick/Lift TIG, HF TIG power source. With features like high frequency start, lift arc start, up/down slope, welding program save/recall, pulse on AC or DC, repeat (latch) function and spot mode, youve got the ultimate unit designed for precision TIG and MMAW of stainless steel and other DC weldable materials. Please refer to specifications at rear of brochure for comprehensive information.
Optional Accessories
Slide control Hand pendant Foot control TIG torch (4m) Torch accessories kit Gas hose Flowmeter/regulator Lead set (8m) 14 pin plug OTD10/2004 OTD10/2005 OTD10/2007 528720401 BGSAK2 700433 301526 646325 7977710
Portable Inverters
HF
CC DC
PHASE
415 300
V AMP
Features
Compliant integrated Voltage Reduction Device Embedded micro-processor with digital controls Intelligent heat sensing fan operates on demand Easy to use digital display and panel control Fully adjustable weld parameters Lift TIG & MMAW modes Intelligent self diagnostic control Save/Load (Recall) weld programs
Power Source Part No. 625781
Ordering Information
TRANSARC 300 Si power source 625781
The TRANSARC 300Si is a 415 volt volt full digital control, DC stick/Lift TIG, HF TIG Inverter power source. Loaded with features like Voltage Reduction Device (VRD), Lift TIG start, hot start and arc force control youve got the ultimate unit designed for MMAW and Lift TIG welding of steel and other DC weldable materials. All welding parameters are variable for complete adjustment of welding process. Please refer to specifications at rear of brochure for comprehensive information. OTD10/2004 OTD10/2005 OTD10/2007 528720401 BGSAK2 700433 301526 646325 7977710
Optional Accessories
Slide control Hand pendant Foot control TIG torch (4m) Torch accessories kit Gas hose Flowmeter/regulator Lead set (8m) 14 pin plug
10
Portable Inverters
CC CV
DC
PHASE
415 400
V AMP
Features
Compliant integrated Voltage Reduction Device Save/Load (Recall) weld programs Embedded micro-processor with digital controls Intelligent heat sensing fan operates on demand Easy to use digital display and panel control Exceptional DC welding characteristics MIG, Lift TIG & MMAW modes Fully adjustable weld parameters Intelligent self diagnostic control
Power Source Part No. 710014
The TRANSMIG 400i is a 415 volt, full digital control, DC MIG/stick/Lift TIG
Ordering Information
TRANSMIG 400i power source 710014
power source. Features include variable inductance, digital voltmeter and digital ammeter making this the ultimate unit designed for precision MIG welding of steel and other DC weldable materials. The unit also has an integrated Voltage Reduction Device (VRD) for improved operator safety. Please refer to specifications at rear of brochure for comprehensive information
Optional Accessories
VAF-4 wirefeeder VS212 wirefeeder Tweco No.4 MIG gun Work lead (8m) Slide control Hand pendant Foot control 705700 W3512006 717201 705161 OTD10/2004 OTD10/2005 OTD10/2007
Optional Accessories
TIG torch (4m) Torch accessories kit Gas hose Flowmeter/regulator Lead set (8m) 14 pin plug 424720401 BGSAK2 700433 301526 646325 7977710
11
518710402
548720401
646323
646325
Slide controller
slider suitable for 200Pi, 200AC/DC slider suitable for 300Pi, 300AC/DC, 400i
Hand pendant
hand pendant suitable for 200Pi, 200AC/DC hand pendant suitable for 300Pi, 300AC/DC, 400i
Foot controller
foot controller only for 200Pi, 200AC/DC foot controller only for 300Pi, 300AC/DC, 400i
COMET regulator
301527
Regulator only
301710
Flowmeter only
301711
Flowmeter only
COMET regulator/flowmeter
301526
Regulator/flowmeter combination
VAF-4 Wirefeeder
705700
VAF-4 wirefeeder, 8m interconnection, operating manual suitable for 400i only VS212 wirefeeder, operating manual
W3512006
717201
454294
454295
454296
12
TRANSARC
141VRD
625775 625779
TRANSARC
161VRD
625799 625801
TRANSTIG 200Pi
700720 700730
TRANSTIG 300Pi
700722
WELDING OUTPUT
Maximum output Maximum GTAW duty cycle @ 40C Maximum MMAW duty cycle @ 40C Maximum GMAW duty cycle @ 40C GTAW @ 100% duty cycle MMAW @ 100% duty cycle GMAW @ 100% duty cycle GTAW current range MMAW current range Welding voltage range Current control 140 amp DC 70%@140 amp 60%@140 amp 110 amp 110 amp 5-140 amp 5-140 amp 10-25.6 volt Infinitely variable 160 amp DC 60%@160 amp 60%@160 amp 125 amp 125 amp 5-160 amp 5-160 amp 10-26.4 volt Infinitely variable 200 amp DC 20%@200 amp 35%@160 amp 100 amp 100 amp 5-200 amp 5-160 amp 10-26.4 volt Infinitely variable 300 amp DC 40%@300 amp 40%@300 amp 180 amp 180 amp 5-300 amp 5-300 amp 10-32 volt Infinitely variable
WELDING MODES
Lift TIG DC Lift TIG DC with Pulse HF Start TIG DC HF Start TIG DC with Pulse Stick DC with VRD HF Start TIG AC HF Start TIG AC with Pulse Stick AC with VRD MIG Weld Mode
PRIMARY POWER
Input voltage Rated input current Maximum input current Recommended generator kVA 240 volt 21 amp 28 amp 8 kVA 240 volt 25 amp 33 amp 8.5 kVA 240 volt 21.7 amp 36.7 amp 8.8 kVA 415 volt 14.1 amp 22.3 amp 16 kVA
FEATURES
Warranty period Standard weld mode (2T) Slope weld mode (4T) Repeat weld mode (4T repeated) Spot welding in TIG mode Pre-flow time Hot start current Initial current Up slope time Peak current Base weld output TIG Stick MIG Spot time Pulse width Pulse frequency AC frequency AC wave balance Down slope time Crater current Post-flow time Arc force control (Stick mode) 18 months* 18 months* 3 years * 0-1.0 sec 0-70 amp 5-200 amp 0-15 sec 5-200 amp 5-200 amp 5-160 amp 0.5-5.0 sec 15-80% 0.5-500 Hz 15-150 Hz 10-65% 0-25 sec 5-200 amp 0-60 sec 3 years* 0-1.0 sec 0-70 amp 5-300 amp 0-15 sec 5-300 amp 5-300 amp 5-300 amp 0.5-5.0 sec 15-80% 0.5-500 Hz 15-150 Hz 10-65% 0-25 sec 5-300 amp 0-60 sec
*Refer to warranty schedule for details. MMAW = Manual Metal Arc Welding (Stick) GTAW = Gas Tungsten Arc Welding (TIG) GMAW = Gas Metal Arc Welding (MIG)
13
TRANSTIG 200AC/DC
700719 700735
TRANSTIG 300AC/DC
700723
TRANSARC 300Si
625781
TRANSMIG 400i
710014
WELDING OUTPUT
Maximum output Maximum GTAW duty cycle @ 40C Maximum MMAW duty cycle @ 40C Maximum GMAW duty cycle @ 40C GTAW @ 100% duty cycle MMAW @ 100% duty cycle GMAW @ 100% duty cycle GTAW current range MMAW current range Welding voltage range Current control 200 amp AC/DC 20%@200 amp 40%@160 amp 100 amp 100 amp 5-200 amp 5-160 amp 10-26.4 volt Infinitely variable 300 amp AC/DC 25%@300 amp 25%@300 amp 150 amp 150 amp 5-300 amp 5-300 amp 10-32 volt Infinitely variable 300 amp DC 40%@300 amp 40%@300 amp 180 amp 180 amp 5-300 amp 5-300 amp 10-32 volt Infinitely variable 400 amp DC 25%@400 amp 25%@400 amp 25%@400 amp 200 amp 200 amp 200 amp 5-400 amp 5-400 amp 10-36 volt Infinitely variable
WELDING MODES
Lift TIG DC Lift TIG DC with Pulse HF Start TIG DC HF Start TIG DC with Pulse Stick DC with VRD HF Start TIG AC HF Start TIG AC with Pulse Stick AC with VRD MIG Weld Mode
PRIMARY POWER
Input voltage Rated input current Maximum input current Recommended generator kVA 240 volt 23.2 amp 36.7 amp 8.8 kVA 415 volt 11.1 amp 22.3 amp 16 kVA 415 volt 14.1 amp 22.3 amp 16 kVA 415 volt 16.7 amp 33.4 amp 24 kVA
FEATURES
Warranty period Standard weld mode (2T) Slope weld mode (4T) Repeat weld mode (4T repeated) Spot welding in TIG mode Pre-flow time Hot start current Initial current Up slope time Peak current Base weld output TIG Stick MIG Spot time Pulse width Pulse frequency AC frequency AC wave balance Down slope time Crater current Post-flow time Arc force control (Stick mode) 3 years * 0-1.0 sec 0-70 amp 5-200 amp 0-15 sec 5-200 amp 5-200 amp 5-160 amp 0.5-5.0 sec 15-80% 0.5-500 Hz 15-150 Hz 10-65% 0-25 sec 5-200 amp 0-60 sec 3 years* 0-1.0 sec 0-70 amp 5-300 amp 0-15 sec 5-300 amp 5-300 amp 5-300 amp 0.5-5.0 sec 15-80% 0.5-500 Hz 15-150 Hz 10-65% 0-25 sec 5-300 amp 0-60 sec 0-70 amp 5-300 amp 5-300 amp 0-100% 3 years* 0-70 amp 5-400 amp 5-400 amp 14.3-34 volt 0-100% 3 years*
*Refer to warranty schedule for details. MMAW = Manual Metal Arc Welding (Stick) GTAW = Gas Tungsten Arc Welding (TIG) GMAW = Gas Metal Arc Welding (MIG)
14
Authorised Distributor:
CIGWELD Pty Ltd A Division of Thermadyne Corporation, 71 Gower St, Preston VIC 3072 Australia Customer Service Centre Tel: 1300 654 674 Fax: 03 9474 739 Email: cigweldsales@cigweld.com.au International Enquiries Tel: + 61 3 9474 7508 Fax: + 61 3 9474 7488
www.cigweld.com.au
AD3760 Portable Inverters 10.08
Malaysia - Thermadyne Asia Sdn Bhd Lot 151, Jalan Industri 3/5A Rawang Integrated Industrial Park Jin Batu Arang 48000 Rawang Selangor Darul Ehsan West Malaysia Telephone: 603+ 6092 2988 Facsimile: 603+ 6092 1085
Indonesia - PT. Thermadyne Utama Indonesia Kawasan Industri Jababeka JI. Jababeka IXD Blok P No. 3 Cikarang - Bekasi 17530 Indonesia Telephone: 62 21+8983 0011 / 0012 Facsimile: 62 21+893 6067
China - Thermadyne Industries, Inc. Room 3109, 2 Grand Gateway, No.3 Hongqiao Road, Xuhui District, Shanghai 200030 China Telephone: 86 21 6407 2626 Facsimile: 86 21 6448 3032
In the interest of continuous improvement, CIGWELD Pty Ltd ABN 56 007 226 815 reserve the right to change the specifications or design on any of its products without prior notice.