Professional Documents
Culture Documents
FPO
Cross-Reference
Art. No. Description Page Art. No.
Description 11x20 mm punch 11x20 mm die 14x20 mm punch 14x20 mm die 6,5-9-11-14 ejection stop 18-20 ejection stop Punch Holder 6,5-9-11-14 Punch Holder 18-20 Die Holder 5/16 Punch - 1/4 Bolt 5/16 Die - 1/4 Bolt 3/8 Punch - 5/16 Bolt 3/8 Die - 5/16 Bolt 17/32 Punch 7/16 Bolt 17/32 Die - 7/16 Bolt 9/16 Punch - 1/2 Bolt 9/16 Die - 1/2 Bolt PB 16 PB 25 PB50 ERIFLEX FLEXIDRILL ERIFLEX FLEXIDRILL Imperial BD 16 - 6,5 BD 25 - 11 BD 50 - 12,5 BD 16 - 8,5 Workbench - FT Kit
Page 9 9 9 9 9 9 9 9 9 9 9 9 9
Art. No.
Description Tool ruler HFST-B Hydraulic shearing tool HFST Tool Guide HFST-B Tool blades HFST-C Stripping knife - SOK Spare blade for SOK Stripping Tool - MFS Set of blades for MFS Set of blades for MFC DRCK Bending Tool - MFB Twisting Tool - MFT Shearing Tool Manual Bending Tool - MCBB
Page 11,12 12 12 12 15 15 15 15 13 16 14 14 13 15
545650 545670 545680 545690 545695 545700 545701 545706 545720 545800 545801 545805 545806 545810 545811 545815 545816 545820 545821 545825 545826 545850 545851 545855 545856
HYDRAULIC BUSBAR & ERIFLEX FLEXIBAR WORK CENTER - 230V Busbar bender Puncher Hydraulic Busbar Cutter Hydraulic Busbar Cutter Blade Electro Hydraulic Pump 230 V + Foot Controller Electro Hydraulic Pump 115 V + Foot Controller Hydraulic oil 0,946 liter HYDRAULIC BUSBAR & ERIFLEX FLEXIBAR WORK CENTER - 115V 6,5 mm punch 6,5 mm die 9 mm punch 9 mm die 11 mm punch 11 mm die 14 mm punch 14 mm die 18 mm punch 18 mm die 20 mm punch 20 mm die 6,5x13 mm punch 6,5x13 mm die 9x18 mm punch 9x18 mm die
545860 7 10 9 11 11 11 11 11 7 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 558601 558610 558620 558630 558640 558900 545861 545865 545866 545890 545892 545900 545905 545910 545950 545951 545955 545956 545960 545961 545965 545966 557180 557190 557380 558600
558990 559010 559020 559040 559050 559060 559100 559110 559120 559140 559150 559160 559170 559190
9 9 9 9 16 16 16 14 14 16 16 16 16 13
UNITED KINGDOM 52 Milford Road Reading, Berkshire RG1 8LJ United Kingdom Phone 00 800 5000 1090 Fax 00 800 6000 1090 OTHER COUNTRIES B.P. 31 - 42161 Andrzieux Cedex Phone 00 33 477 36 56 56 Fax 00 33 477 36 18 10 NORTH AMERICA 34600 Solon Road Solon, Ohio 44139 United States of America Phone 1-800-497-4304 Fax 1-800-944-4296
WARNING ERICO products shall be installed and used only as indicated in ERICOs product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICOs instructions and warnings may cause product malfunction, property damage, serious bodily injury and death. WARRANTY ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyers receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICOs prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYERS EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT. LIMITATION OF LIABILITY ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICOs employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.
www.erico.com
Contents
Hydraulic Busbar & ERIFLEX FLEXIBAR Work Center
Hydraulic Busbar & ERIFLEX FLEXIBAR Work Center See on Page 4-7 Hydraulic Busbar & ERIFLEX FLEXIBAR Puncher See on Page 8-9 Hydraulic Busbar Bender See on Page 10 Hydraulic Busbar Cutter See on Page 11
Manual Tools
Manual Tool Workbench See on Page 13 Shearing Tool See on Page 13 Bending Tool See on Page 14 Twisting Tool See on Page 14 ERIFLEX FLEXIDRILL R See on Page 14
www.erico.com
ERICO DEsign
www.erico.com
V bending
Z bending
Straighten
Hydraulic ERIFLEX FLEXIBAR Shearing Tool (Not Included in Europe Work Center. Included in North America Work Center.)
www.erico.com
Strong structure
www.erico.com
Forklift rail Additional hydraulic hose & 6 m long power cable Directional and locking wheels Electrical panel control with circuit breaker
13
80
Article No
Description Hydraulic Busbar & ERIFLEX FLEXIBAR Work Center - 230V (ERIFLEX FLEXIBAR Shearing Tool not included) Hydraulic Busbar & ERIFLEX FLEXIBAR Work Center - 115V (ERIFLEX FLEXIBAR Shearing Tool included) 356 kg
1465
14 65 77 0
545650
545720
857 lbs.
www.erico.com
6,5
3. Three Positions
90 available on work center only. If Puncher is purchased separately, only two positions available: 0 and 45
120
470
30 5
14
13 0
45
90
www.erico.com
Punching Machine
Article No 545680 Description Puncher 1 54.00
Punch (g. 1)
6,5 mm 9 mm 11 mm 14 mm 18 mm 20 mm 1 1 1 1 1 1 0.13 0.14 0.14 0.16 0.24 0.25
Article N
545801 545806 545811 545816 545821 545826
Die (g. 2)
6,5 mm 9 mm 11 mm 14 mm 18 mm 20 mm 1 1 1 1 1 1 0.19 0.18 0.17 0.16 0.13 0.11
Article N
545890 545890 545890 545890 545892 545892
Metric Oval Holes (Punches and Dies for Imperial Oval Holes and Slots Available On Request)
Article N
545850 545855 545860 545865
Punch (g. 3)
6,5x13 mm 9x18 mm 11x20 mm 14x20 mm 1 1 1 1 0.14 0.22 0.24 0.24
Punch (g. 1)
5/16 Punch 1/4 Bolt 3/8 Punch 5/16 Bolt 17/32 Punch 7/16 Bolt 9/16 Punch 1/2 Bolt 1 1 1 1 0.13 0.14 0.16 0.16
Article N
545951 545956 545961 545966
Die (g. 2)
5/16 Die 1/4 Bolt 3/8 Die 5/16 Bolt 17/32 Die 7/16 Bolt 9/16 Die 1/2 Bolt 1 1 1 1 0.19 0.18 0.16 0.16
Spare Parts
Article No 545900 545905 545910 Description Punch Holder 6,5-9-11-14 (fig. 6) Punch Holder 18-20 (fig. 6) Die Holder (fig. 7) 1 1 1 0.55 0.48 1.60
www.erico.com
Description
Busbar bender 1 51
50
V bending
Z bending
Straighten
2. Large capacity: 2000 mm2 / 200 x 10 mm (8 x 3/8) 3. Easy access allowing numerous bending possibilities
23
10
www.erico.com
261
Copper or Aluminium Busbar Maximum Capacity Maximum bar width: 125 mm (5) Maximum bar thickness: 12,7 mm (1/2) Blade 7 mm thick Strong mechanical construction: Guiding system 2 columns Flat and clean cut edge Visual inspection of cutting position Transparent finger protection Easy access for blade maintenance
395
240
Article N
545690 545695
Description
Hydraulic Busbar Cutter Hydraulic Busbar Cutter Blade 1 1 41 1
Article N Description
558990 Tool ruler HFST-R 1 10
285
Article N
545700 545701 545706
Description
Electro Hydraulic Pump 230 V + Foot Controller Electro Hydraulic Pump 115 V + Foot Controller Hydraulic oil 0,946 liter 1 1 1 40 40 1
www.erico.com
11
Copper or Aluminium Strong mechanical construction Cuts quickly and accurately without burrs or deformation Visual inspection of cutting position Maximum Capacity Copper cross section 1200 mm Width of bar: 120 mm (4-3/4) Thickness of bar: 12 mm (1/2) ERIFLEX FLEXIBAR 10 x 120 x 1 Maximum WARNING: Cutting solid bars will damage the tool
341
240
Article N
559010 559040
Description
Hydraulic shearing tool HFST Tool blades HFST-C 1 1 34 1 120 10
Article N Description
558990 Tool Ruler HFST-R 1 10
285
244
Article N Description
559020 Tool Guide HFST-B 1 1
73
76
12
www.erico.com
Stripping Tool
Shearing Tool
Every tool can be purchased separately - see pages 13-15 Bending Tool
Description
Workbench - FT Kit 1 35
Shearing Tool
Shearing Capacity
Cuts quickly and accurately without burrs or deformation Cuts with the insulation on without any damage Graduated endstop Cost-effective Spare blade MFCB
max 5 max 32
Article N
559170 559120
Description
Shearing Tool Set of blades for MFC 1 1 3.5 0.5
ERIFLEX FLEXIBAR 5 x 32 x 1 maximum Warning: Cutting solid bars will damage the tool Over all dimensions: L 170 x I 200 x H 270 mm
www.erico.com
13
Bending Tool
Bends quickly without insulation damage Manual saw guide included Adjustable angle up to 120 Bending radius: 5 mm Maximum capacity: ERIFLEX FLEXIBAR 10 x 100 x 1
Description
Bending Tool - MFB 1 7
Twisting Tool
Unlimited possibilities of twisting or changing plane. To be used with the bending tool
100 max.
Description
Twisting Tool - MFT 1 2.5
Description
ERIFLEX FLEXIDRILL ERIFLEX FLEXIDRILL Imperial 1 1 9.5 9.5
Multi-diameter, multi-distance between centers. This guide facilitates the drilling of one or more holes of various diameters at different distances between centers . Drill guide inserts: - 6,5 mm / 8,5 mm / 10,5 mm / 12,5 mm (558600) - 5/16 Die Set - 1/4 Bolt, 3/8 Die Set - 5/16 Bolt, 17/32 Die Set - 7/16 Bolt, 9/16 Die Set - 1/2 Bolt (558601)
14
www.erico.com
Stripping Tool
Quick & simple stripping of ERIFLEX FLEXIBAR from 9 up to 63 mm Cuts all of 4 faces of the insulation in a single operation without damaging the copper. Allows stripping on short length Aluminium cast body, four holes for fixing
Minimum 10 mm
Description
Stripping Tool - MFS Set of blades for MFS 1 1 8 1
Stripping Knife
Accurately cuts the ERIFLEX FLEXIBAR insulation Special sharpening to avoid damaging the conductors Very resistant blade, interchangeable Blade protection Ergonomic shockproof resin handle
Article N
559050 559060
Description
Stripping knife - SOK Spare blade for SOK 1 1 0.062 0.020
Description
Manual Bending Tool - MCBB 1 14
www.erico.com
15
PB
e B
BD
Article N
558610 558640 558620 558630
PB
Description
BD 16 - 6,5 BD 16 - 8,5 BD 25 - 11 BD 50 - 12,5
Bolts
M6 M8 M10 M12 1 1 1 1 0.653 0.653 0.678 0.712
Article N
557180 557190 557380
Description
PB 16 PB 25 PB50
AXB
16 x 15 22 x 25 30 x 30 100 100 100 0.004 0.010 0.017
Article N
559140
Description
DRCK 1 18
16
www.erico.com
A. Cutting to Length
Clean and remove burrs. Start with the developed length plus approximately 10 mm to allow for the sliding of the laminates during bending. (see cutter Part No. 559170)
A1
A2
A3
B. Stripping
Accurate, without marking the copper. The connecting area can be kept as short as possible to reduce non-insulated parts in the panel (see stripper Article No. 559100 and knife SOK Article No. 559050)
B1
B2
B3
B4
B5
B6
B7
www.erico.com
17
C2
C3
C4
C5
C6
C7
C8
D5
D6
D7
D8
D9
D10
D11
D12
18
www.erico.com
2 1 =2 E4 y E5 E6 3 1 y 2 F=
E7
E8
E9
www.erico.com
19
www.erico.com
AUSTRALIA
Phone 1-800-263-508 Fax 1-800-423-091
CHINA
Phone +86-21-3430-4878 Fax +86-21-5831-8177
HUNGARY
Phone 06-800-16538 Fax +39-0244-386-107
NORWAY
Phone 800-100-73 Fax 800-100-66
SWITZERLAND
Phone 0800-55-86-97 Fax 0800-55-96-15
BELGIUM
Phone 0800-757-48 Fax 0800-757-60
DENMARK
Phone 808-89-372 Fax 808-89-373
INDONESIA
Phone +62-21-575-0941 Fax +62-21-575-0942
POLAND
Phone +48-71-349-04-60 Fax +48-71-349-04-61
THAILAND
Phone +66-2-267-5776 Fax +66-2-636-6988
BRAZIL
Phone +55-11-3623-4333 Fax +55-11-3621-4066
FRANCE
Phone 0-800-901-793 Fax 0-800-902-024
ITALY
Phone 800-870-938 Fax 800-873-935
SINGAPORE
Phone +65-6-268-3433 Fax +65-6-268-1389
CANADA
Phone +1-800-677-9089 Fax +1-800-677-8131
GERMANY
Phone 0-800-189-0272 Fax 0-800-189-0274
MEXICO
Phone +52-55-5260-5991 Fax +52-55-5260-3310
SPAIN
Phone 900-993-154 Fax 900-807-333
UNITED KINGDOM
Phone 0808-2344-670 Fax 0808-2344-676
CHILE
Phone +56-2-370-2908 Fax +56-2-369-5657
HONG KONG
Phone +852-2764-8808 Fax +852-2764-4486
NETHERLANDS
Phone 0800-0200-135 Fax 0800-0200-136
SWEDEN
Phone 020-790-908 Fax 020-798-964
UNITED STATES
Phone 1-800-753-9221 Fax +1-440-248-0723
IEC is a service mark of the Independent Electrical Contractors, Inc. The UL Recognized Component Mark is a registered trademark of Underwriters Laboratories, Inc. UL is a registered trademark of Underwriters Laboratories, Inc. Copyright 2009, 2010 ERICO International Corporation. All rights reserved. CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation. P776B-WWEN P1159LT10WWEN 0.5M0810