Professional Documents
Culture Documents
that absolutely no traces of water are found on the surface, especially on cracks. Mix resin and hardener in the ratio specified by weight and apply the mixture uniformly on the full surface of granite. Accumulate additional quantity of this mixture over the cracks/holes. Leave the slabs to dry for 20-24hrs. Polish these slabs starting from grit120.
237 (100:50 by Weight or 3.5:2 by Volume) EPOXY FOR WHITE & EXPENSIVE MARBLE:
Two component epoxy system hardens slowly at room temperature. The hardened mass has a glass like appearance. It has excellent resistance to light. Used on material like Australian White, Onyx, Carrara etc. Gel time at 25C Gel time at 60C Viscosity (at 25C) Colour (of mixture) Moving of slab after (at 25C) Polishing of slab after (at 25C) 3h 30 min to 4h 30 min 45 to 50 min Medium Colourless 2hrs45min 12h
8115 (100:25 by Weight or 3.5:1 by Volume) EPOXY FOR LIGHT COLOUR CHANGE WITH HIGH GLOSS:
Two component, low viscosity, completely reactive epoxy system. Excellent mechanical and adhesive properties, good light stability. It is used for screening, priming and strengthening of marble and stone slabs. Gel time at 40C Viscosity (at 25C) Colour (of mixture) Moving of slab after Polishing of slab after(at 25C) 70 to 80 min 300 to 400 mPa's Pale yellow 1h 40 min 6h
5035 (100:37 by Weight or 2.5:1 by Volume) EPOXY FOR LIGHT COLOUR CHANGE FOR MARBLE AND GRANITE):
Uncharged, solvent-free two-component epoxy system with low viscosity. Fast curing at room temperature, even with high humidity levels. It give very high gloss to the stone. Specially designed for multi-coloured granite. Gel time at 25C Gel time at 40C Gel time at 50C Pot life at 25C Moving of slab after Polishing of slab after (at 25C) 3 to 4h 80 to 95 min 40 to 50 min 30 to 40 min 2 hr 36h
8110 (100:25 by Weight or 5:1.5 by Volume) EPOXY FOR BRAZILIAN GRANITE AND COLOURED MARBLE:
Two component, low viscosity, completely reactive epoxy system. Hardening at room temperature or with heat. Excellent mechanical and adhesive properties. Gel time at 25C Gel time at 40C Gel time at 50C Viscosity (at 25C) Pot life at 25C Colour (of mixture) Moving of slab after Polishing of the slab after (at 25C) Hardening time at 25C 2h 30 min to 3h 30min 70 to 80 min 30 to 40 min Low 25 to 35 min pale yellow 1 h 40 min 6h 10-15h
8112 (100:25 by Weight or 5:1.5 by Volume) PREMIXED BEIGE COLOUR EPOXY FOR ITALIAN MARBLE:
Two components, low viscosity, completely reactive epoxy system, coloured Botticino version of 8110. Hardening at room temperature or with heat. Excellent mechanical and adhesive properties. Gel time at 25C Gel time at 40C Gel time at 50C Viscosity (at 25C) Pot life at 25C Colour (of mixture) Moving of slab after Polishing of the slab after (at 25C) Hardening time at 25C 2h 30 min to 3h 30min 70 to 80 min 30 to 40 min Low 25 to 35 min Botticino 1h 40 min 6h 10 to 15h
8021(100:25 by Weight or 3.5:1 by Volume) NO COLOUR CHANGE EPOXY FOR WHITE GRANITE:
Two component epoxy resin fully reactive and no alteration slab colour. Semi rigid with excellent mechanical properties and adhesion. Used for impregnation and stabilization /strengthening of marble, granite and stone slabs. Particularly suitable for granite like Kashmir White, Imperial White etc. Gel time at 25C Gel time at 40C Gel time at 50C Viscosity (at 25C) Pot life at 25C Colour (of mixture) Moving of slab after (at 25C) Polishing of the slab after (at 25C) 12 to 15 min 7 to 9 min 4 to 5 min Medium 1.5 to 2 min Pale yellow 45 min 4h
8000(100:25 by Weight or 5:1.5 by Volume) NO COLOUR CHANGE EPOXY FOR COLOURS GRANITES:
Two component epoxy resin, excellent mechanical properties and adhesion. It is used for impregnation and stabilization/ strengthing of marble, granite and stone slabs particularly for light coloured materials such as Raw Silk, River White, Ivory Chiffon, Ivory Fantasy and Steel Grey. Gel time at 25C Gel time at 40C Gel time at 50C Viscosity (at 25C) Pot life at 25C Colour (of mixture) Moving of slab after (at 25C) Polishing of the slab after (at 25C) 40 min to 50 min 13 to 17 min 9 to 11min Medium 3 to 4 min Colourless/ pale yellow 1h 6h
5091 (100:35 by Weight or 5:2 by Volume) MEDIUM DARK EPOXY FOR MARBLE AND GRANITE:
Two component completely reactive epoxy system. Semi rigid with excellent mechanical and adhesive properties. Hardens slowly. Used for marble and granite. It is specially designed for low porosity materials and those with very fine cracks. This gives dark finish with colour enhancement. Gel time at 25C Gel time at 40C Gel time at 50C Viscosity (at 25C) Pot life at 25C Colour (of mixture) Moving of slab after (at 25C) Polishing of the slab after (at 25C) 3h 20min to 3h 15min 1h 10min to 1h 20 min 50 to 55 min Low 25 to 30min Colourless / pale yellow 4h 24h
5033(100:20 by Weight or 4:1 by Volume) SPECIAL POLYURETHANE SYSTEM FOR BLOCK REINFORCEMENT
System based on thixotropic solvent andplasticizer free poly urethane. The thixotropyoccurs when the two liquid components are mixed. It is used for grouting and sealing where high thixotropic values are required. Gel time at 23C 15 to 25 min Viscosity Thixotropic Block handling after 4h Block cutting after 24h Water absorption after curing for 1 hour at 100C 0.5to 0.6%
5020 (100:25 by Weight or 5:1.5 by Volume) EPOXY FOR NETTING OF MARBLE AND GRANITE:
Two component epoxy resin fully reactive. High reactivity and hardening at room temperature. It is used for Marble and stones impregnation. Glass Fibers reinforcement. Gel time at 25C Gel time at 40C Viscosity (at 25C) Colour (of mixture) Moving of slab after(at 25C) 70 to 90 min 60 to 70 min 450 to 550 mPa's colourless/pale yellow 1Hr 40 min
COLOURS:
Available in paste form in KG1 packing. They are available in Red,Black,Brown,White,Green,Beige, Yellow and Blue colours. These colours are used for mixing with Epoxy Systems as per requirement.
FIBER NET
The two types of net are available with the following characteristics:
Sl. No. 1
Characteristics GSM Tensile strength: Warp Weft Average Mesh Thickness Normal Mesh size: Std. Width Available: Standard Roll Length Standard Colour
Fiber Net (from China) 64.4-75.6 700N/5cm 700N/5cm 4x5 mm 1.8 & 2meter 300meter White
Garza 75 (from Italy) 65-75 1000N/5cm 700/5cm 0.34 + 0.03mm 4x6mm 1.8 & 2 meter 300meter White
2 3 4 5 6 7
This can be used for applying at the back of slab to give the strength. This help in easy processing of slab like handling, polishing and transportation. This can also be used for block reinforcement. This help to maintain the integrity of material while and after cutting.