Professional Documents
Culture Documents
8305e
Ed. 4.01
P. 1 ... 2
Small, lightweight variable capacitance sensing element Frequency response 0 ... 250Hz Operates from a 9 volt battery 8303 replacement with less than 1mA supply current Conforming to CE
1:1
Technical Data
Units
8305A2, M(X)
2 500 1000 2.5 0 280 20 200 1.4 2 20 250 0.4 (0.8) <10 ( 30) 1.0 20 6000 0.01 (0.018) 0.02 (0.032) 0.11 (0.56) 0.2 (1.0)
8305A10, M(X)
10 100 200 2.5 0 1410 100 1000 2.7 2 20 180 0.4 (0.9) <10 ( 30) 1.0 20 6000 0.01 (0.018) 0.02 (0.032) 0.56 (2.8) 1.0 (5.0) 40 ... 185 ( 40 ... 85) 65 ... 255 ( 55 ... 125) 0.5 5000 40 7 ... 16 0.7 40
8305A25, M(X)
25 40 80 2.5 0 3535 250 2500 5.1 2 20 100 0.6 (1.5) <10 ( 30) 1.0 20 6000 0.01 (0.018) 0.02 (0.032) 1.5 (6.9) 2.7 (12.5)
Acceleration Range g Sensitivity 5%. mV/g M2 version only mV/g V Zero g Output 5% M2 version only, 0.2 5V V Resolution (Threshold) typ. g Noise Density typ. (0 ... 10 0 Hz) g rms / Hz Noise (0 ... 10 0 Hz) typ. g rms Resonant Frequency nom. kHz Phase Shift @ 10 Hz max. degree 100 Hz max. degree Frequency Response 5% (100 Hz Ref.) Hz Amplitude Non-linearity typ. (max.) %FS Sensitive Axis Misalignment typ. (max.) mrad Transverse Sensitivity typ. % Environmental: Random Vibration 20 ... 2000 Hz g rms Shock 0.5 ms, half sine g pk Temperature Coefficient of: Sensitivity typ. (max). %/F %/C Bias typ. (max). mg/F mg/C Temperature Range: Operating F (C) Storage F (C) Integral Cable Length m Capacitive Load max. pF Operating Load Resistance min. k Supply Voltage VDC Current typ. mA Output Impedance
1 g = 9.80665 m/s 2, 1 inch = 25.4 mm, 1 gram = 0.03527 oz, 1 lbf-in = 0.1129 Nm
Kistler Instrument Corporation reserves the right to discontinue or change specifications, designs or materials without notice consistent with sound engineering principles and quality practices. Kistler Instrument Corporation , 75 John Glenn Drive, Amherst NY 14228 Phone 716-691-5100, Fax 716-691-5226, e-mail: kicsales@kistler.com, www.kistler.com
No. K8.8305e
Ed. 4.01
P. 2
Technical Data Construction: Sensing Element Housing / Base Sealing - Housing Connector Cable Weight Mounting
continued from page 1
8305 Series capacitive Al./ hard anodize Epoxy pigtail, or 4-pin shielded 6.5 cap screw
1.16
[29,5]
0.965 [24,5]
Power can be furnished from a regulated DC power supply or from a 9-Volt alkaline battery. The K-Beam accelerometers are available either in a standard 0.5 meter length or in a user specified cable length . The 8305A series accelerometers are housed in a sturdy, environmentally protected, anodized aluminum case with mounting flanges.
0.620
[15,7] 0.145 [3,7] 0.355 [9]
+g
Ordering Information
Sensor Power (not supplied)
1.160
[29,5]
Signal 8305A(X) power (+7...+16 VDC) (+) signal output power/ signal ground not used not used not used
Signal 8305A(X)M2 power (+7...+16 VDC) (+) signal output power/ signal ground () signal output not used not used
Specify: 1 - 8305A(X)
(X) = specify accelerometer range accelerometer; single ended output; cable length 0.5m; pigtail termination. 8305A(X)sp accelerometer; single ended output; cable length user specified, in meters; pigtail termination. 8305A(X)M2 accelerometer, differential output; cable length 0.5m; pigtail termination. 8305A(X)M2sp accelerometer, differential output; cable length user specified, in meters; pigtail termination. 8305A(X)M4 accelerometer; single ended output; cable length 0.5m; 4-pin pos. Microtech connector termination. 8305A(X)M4sp accelerometer; single ended output; cable length user specified, in meters; 4-pin pos. Microtech connector termination. 8305A(X)M7 accelerometer; single ended output; cable length 2m; 4-pin neg. Microtech connector termination; connects directly to 5210 K-BEAM power supply. 8305A(X)M7sp accelerometer; single ended output; cable length user specified, in meters; 4-pin neg. Microtech connector termination; connects directly to 5210 K-BEAM power supply.
shield
connected to case
8305A(X)M4
Power Gnd.
Signal Out
Signal Gnd
Accessories
Supplied: 431-0475-001 431-0475-002 434-0318-001 8432 Optional: 8516 triaxial mounting cube (2) M2.5 x 10mm Socket HD Cap Screw (2) 4-40 x 3/8 Socket HD Cap Screw (4) Washer, 2.7mm I.D., Thk. Fiber (1) Mounting Wax
8305A(X)M7
+ Power
Power Gnd.
Signal Gnd.
Signal Out
Kistler Instrument AG Winterthur , Postfach 304, CH-8408 Winterthur Tel + 41 - 052 - 224 11 11, Fax + 41 - 052 - 224 14 14, sales@kistler.ch, www.kistler.com
Kistler Instrument Corporation , 75 John Glenn Drive, Amherst NY 14228 Phone 716-691-5100, Fax 716-691-5226, e-mail: kicsales@kistler.com, www.kistler.com