Professional Documents
Culture Documents
Characteristics
The D*1FS pilot-operated proportional valve series of the nominal sizes NG10 to NG32 (CETOP 5 to 10) provides flow rate control. An additional spool position feedback leads the hysteresis to a minimum. The D*1FS is suited for ambitious standard applications with controlling position and velocity, particularly with regard to functions on identic machines, which need only to be adjusted once. In combination with the digital power amplifier PWDXXA-40*, the valve parameters can be saved, changed and duplicated. Typical applications are: Exact and reproducible adjustment of flow rates, movement of the drive in rapid / slow speed profile and the soft acceleration and deceleration to improve the drive characteristics. Technical features Sensitive flow rate adjustment Spool position feedback Fail-safe centre position Center position monitoring optional
A a P 0
B b
U
D*1FS
D_1FS.PMD CM
3-49
Parker Hannifin GmbH & Co. KG Hydraulic Controls Division Kaarst, Germany
Catalogue HY11-2500/UK
Ordering Code
D
DC valve Nominal size
F
Flow control
S
with spool position feedback
(plug included)
N
Spool type Pilot Solenoid connection description Nominal Seal flow NBR
(different seal compound on request)
W
Valve accessories Design series
Code 3 4 8 9 1) 11
1)
Nominal size NG10 / CETOP 5 NG16 / CETOP 7 NG25 / CETOP 8 NG25 / CETOP 8 NG32 / CETOP 10
with enlarged connections 32mm Code Spool type L Solenoid description 6 VDC / 2.5A (to use digital power amplifier)
QB = QA /2
B31
QB = QA /2
Code 1 2 4 5
Flow [l/min] at p 5bar per metering edge D41 120 (180) D81 300 (360) D91 400 (360) D111 1000 (850)
D_1FS.PMD CM
3-50
Parker Hannifin GmbH & Co. KG Hydraulic Controls Division Kaarst, Germany
Catalogue HY11-2500/UK
Technical Data
General Design Actuation Size Mounting interface Mounting position Ambient temperature [C] Weight [kg] Hydraulic Max. operating pressure [bar] Fluid Fluid temperature [C] Viscosity permitted [mm2/s] Viscosity recommended [mm2/s] Filtration Flow nominal at p=5bar per control edge * [l/min] Leakage at 100 bar [ml/min] Pilot supply pressure [bar] Pilot flow [l/min] Pilot flow, step response [l/min] Static / Dynamic Step response at 100% step [ms] Hysteresis [%] Sensitivity [%] Electrical characteristics Duty ratio [%] Protection class Solenoid Supply voltage [V] Current consumption [A] Resistance [Ohm] Coil insulation class Electrical connection Wiring min. [mm] Wiring lenght max. [m] Electrical monitor switch Protection class Ambient temperature [C] Supply voltage/ripple [V] Current consumption without load [mA] Max. output current per channel, ohmic [mA] Min. output load per channel, ohmic [kOhm] Max. output drop at 0.2A [V] Max. output drop at 0.4A [V] EMC Max. tol. ambient field strength [A/m] Min. distance to next AC solenoid [m] Interface Wiring min. [mm] Wiring lenght max. [m] Electrical LVDT Protection class Ambient temperature [C] Supply voltage/ripple [V] Current consumption [mA] EMC Interface Wiring min. [mm] Wiring lenght max. [m] * Flow rate for different p per control edge:
D_1FS.PMD CM
Pilot-operated DC Valve Proportional solenoid NG10 NG16 NG25 (CETOP 5) (CETOP 7) (CETOP 8) DIN 24340 / ISO 4401 / CETOP RP121 / NFPA Any -20...+60 7.1 10.8 19 Ports P, A, B, T, X max. 350; Port Y max. 10 Hydraulic oil as per DIN 51524...535, other by request -20...+60 20...380 30...80 ISO 4406 (1999) 18/16/13 (acc. NAS 1683: 7) 45 120 100 200 20-350 (optimal dynamics at 50) <1.2 0.8 1.7 35 <0.5 <0.2 60 300/400 600
62
1000 1000
3.8 80
7.6 200
100% IP54 Code L 6 2.5 2.2 F (155 C) 2+PE acc. EN 175301-801 3x1.5 (AWG 16) overall braid shield 50 IP65 0-70 18...42, ripple <10% eff. <30 400 100 <1.1 <1.6 EN 50081-1 / EN50082-2 1200 0.1 4+PE acc. IEC 61076-2-101 (M12) 4x0.5 (AWG 20) overall braid shield 50 IP65 -20...+50 18...36, ripple <10% eff. <50 EN 50081-1 / EN50082-2 4+PE acc. IEC 61076-2-101 (M12) 5x0.5 (AWG 20) overall braid shield 50 Qx = QNom.
p x pNom.
3-51
Parker Hannifin GmbH & Co. KG Hydraulic Controls Division Kaarst, Germany
Catalogue HY11-2500/UK
Spool code B*
= output, actual spool position = supply (18...36 VDC) = GND (0V) = not used = PE
PE = ground potential
Monitor switch
1 2 3 4 5 = output B (normally closed) = supply (18...42 VDC) = output A (normally closed) = GND (0V) = PE
D_1FS.PMD CM
3-52
Parker Hannifin GmbH & Co. KG Hydraulic Controls Division Kaarst, Germany
Catalogue HY11-2500/UK
Pilot Flow
Pilot oil inlet (supply) and outlet (drain) D31FS
D41FS
D81/91FS
D111FS
D_1FS.PMD CM
3-53
Parker Hannifin GmbH & Co. KG Hydraulic Controls Division Kaarst, Germany
Catalogue HY11-2500/UK
Dimensions
D31FS
NBR SK-D31FS-N30
D41FS
D_1FS.PMD CM
3-54
Parker Hannifin GmbH & Co. KG Hydraulic Controls Division Kaarst, Germany
Catalogue HY11-2500/UK
Dimensions
D81/91FS
D111FS
NBR SK-D111FS-N20
D_1FS.PMD CM
3-55
Parker Hannifin GmbH & Co. KG Hydraulic Controls Division Kaarst, Germany
Catalogue HY11-2500/UK
Notes
D_1FS.PMD CM
3-56
Parker Hannifin GmbH & Co. KG Hydraulic Controls Division Kaarst, Germany