Professional Documents
Culture Documents
06/20/2006
SECTION 2: INGREDIENTS
Ingredient
POLYPROPYLENE THERMOPLASTIC ELASTOMER POLYETHYLENE COTTON/POLYESTER BRAIDED BANDS, SYNTHETIC POLYISOPRENE CORES SYNTHETIC POLYISOPRENE INHALATION VALVE SILICONE (ORANGE BAYONET GASKET AND BLUE EXHALATION VALVE)
C.A.S. No.
Unknown Unknown Unknown Unknown Unknown Unknown
% by Wt
40 - 70 30 - 60 10 - 30 5 - 10 1- 5 1- 5
_________________________________________________________________________________________________ Page 1 of 7
06/20/2006
Odor, Color, Grade: Odorless, gray injection molded respirator facepiece General Physical Form: Solid Immediate health, physical, and environmental hazards: This product, when used under reasonable conditions and in accordance with the 3M directions for use, should not present a health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for use may affect the performance of the product and may present potential health and safety hazards.
3.3
Not determined.
_________________________________________________________________________________________________ Page 2 of 7
06/20/2006
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information.
7.2 STORAGE
Not applicable.
8.2.3 Respiratory Protection Not applicable. 8.2.4 Prevention of Swallowing Not applicable.
_________________________________________________________________________________________________ Page 3 of 7
06/20/2006
Condition
Not Specified Not Specified Not Specified Not Specified Not Specified Not Specified Not Specified
Hazardous Decomposition: Under recommended usage conditions, hazardous decomposition products are not expected. Hazardous decomposition products may occur as a result of oxidation, heating, or reaction with another material.
_________________________________________________________________________________________________ Page 4 of 7
06/20/2006
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this material.
Reactivity Hazard - No
Delayed Hazard - No
_________________________________________________________________________________________________ Page 5 of 7
06/20/2006
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory listing requirements. Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Revision Changes: Section 16: NFPA hazard classification heading was modified. Section 3: Potential environmental effects heading was modified. Copyright was modified. Section 3: Potential effects from skin contact information was modified. Section 5: Fire fighting procedures information was modified. Section 15: 311/312 hazard categories heading was modified. Section 15: International regulations information was modified. Section 15: State regulations information was modified. Section 15: US federal regulations information was modified. Section 10: Hazardous polymerization heading was modified. Section 2: Ingredient table was modified. Section 16: NFPA explanation was modified. Section 15: Inventories information was modified. Article disclaimer text (following the copyright) was modified. Section 12: Ecotoxicological information heading was modified. Section 12: Chemical fate information heading was modified. Section 16: NFPA hazard classification for special hazards was modified.
_________________________________________________________________________________________________ Page 6 of 7
06/20/2006
Section 8: Exposure guidelines information - none - was modified. Section 10: Hazardous decompostion heading was modified. Section 12: Ecotoxicological phrase was modified. Section 12: Chemical Fate phrase was modified. Section 2: Ingredient phrase was added. Section 4: First aid for skin contact - medical assistance - was deleted. Section 3: Immediate other hazard(s) comment was deleted.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
_________________________________________________________________________________________________ Page 7 of 7
Caractersticas principales
La pieza facial Serie 6000 de bajo mantenimiento de Media Cara de filtros reemplazables ayuda a lograr un buen ajuste en distintas configuraciones faciales gracias a la disposicin de tres tamaos (S, M y L), su diseo de bajo perfil le permite ser usado con otros implementos de seguridad, sus vlvulas de exhalacin e inhalacin extra grandes permiten tener una menor resistencia a la respiracin y el diseo de sus cartuchos le permiten una mejor distribucin del peso lo que incrementa la comodidad al usarlo. El Respirador 3M Serie 6000 MC es muy liviano por lo facilita el trabajos en tiempos prolongados
Limitaciones de uso
Aprobado para proteccin respiratoria contra partculas, vapores orgnicos, cloro cido clorhdrico, Floruro de hidrogeno, dixido de azufre, amoniaco metilaminas, formaldehdo, radionuclidos (ver limites de los cartuchos) No usar en ambientes cuya concentracin de contaminantes supere 10 veces el Valor Umbral Limite (TLV) No usar en atmsferas cuyo contenido de oxigeno sea menor a 19.5 %. No usar en atmsferas inmediatamente peligrosas para la vida y la salud (IDLH) .
Aplicaciones
Operaciones de soldadura Industria del aluminio Industria del acero Industria del vidrio Industria Farmacutica Agroqumicos Minera Alimenticia Petroqumica Qumica
Garanta
La nica responsabilidad del vendedor o fabricante ser la de reemplazar la cantidad de este producto que se pruebe ser defectuoso de fbrica. Ni el vendedor ni el fabricante sern responsables de cualquier lesin personal prdida o daos ya sean directos o consecuentes que resulten del uso de este producto. Antes de usarlo, se deber determinar si el producto es apropiado para el uso pretendido y el usuario asume toda responsabilidad y riesgo en conexin con dicho uso.
Aprobaciones
Aprobado por la Mine Safety and Health Administracin MSHA y la National Institute for Occuapational Safety And Health NIOSH de Estados Unidos para partculas, gases y vapores; segn el filtro a utilizar y las certificaciones respectivas, para una concentracin ambiental que no supere 10 veces el Valor Umbral Limite ( TLV) o el limite del cartucho (ver certificaciones de filtros y
cartuchos).
Empaque
Piezas / Estuche Estuches / Caja 1 24 Piezas / Caja 24
Materiales
A continuacin se indican los materiales de fabricacin de este respirador: Pieza Facial Color Bandas elsticas = = = Polmero sinttico Gris Elastmero
AUDITIVA
insercin line
Caja Dispensadora 100 unidades
caracteristicas
Fabricado en PVC siliconado hipoalergnico, Textura suave y blanda, para permitir su insercin en el canal auditivo. Tapones unidos por Cordn para mayor comodidad. Caja Dispensadora 100 unidades
usos
Actividades en las cuales se esta expuesto a la presin sonora continua, como el uso de sierras, pulidoras, lijadoras, motosierras, motores, enlatadoras, turbinas, aserradoras, remachadoras, telares, etc.
certificaciones
Fabricado en PVC siliconado hipoalergnico
ANSI S3.19/S12.6