Professional Documents
Culture Documents
(version 8.1)
Server: Copy the contents of the User folder from the old installation to the new one (by default, these folders are located in the C:\Program Files\Transoft Solutions\AutoTURN 8\Shared Data folder for AutoTURN 8.1 and the C:\Program Files\Transoft Solutions\AutoTURN Pro 3D\Shared Data for AutoTURN Pro 3D 8.1). Note: If the user created files are being migrated to a computer running Windows Vista or Windows 7, they must be copied to the AutoTURN Pro 3D workstation folder (the default location is in Users\Public).
Page 1
Configuration Standalone/Workstation
Operating System
MS Windows XP MS Windows Vista MS Windows 7 MS Windows 2000 MS Windows 2003 MS Windows XP
Server
MS Windows 2008 MS Windows Vista MS Windows 7
NOTE: If you downloaded the AutoTURN Pro 3D installation archive, decompress it to an empty folder, double-click the Setup.exe file, and then follow the instructions above starting at Step 3.
Page 2
3. Installing on a Network
IMPORTANT! You must have administrator permissions to install and configure AutoTURN Pro 3D. Installing AutoTURN Pro 3D on a network involves two stages: Setting up the Servers, and then Configuring the Workstations. Folders and Permissions AutoTURN Pro 3D installs files to two main locations during the server installation stage: the Program Files are installed to the Program Server; the License Server files are installed to the License Server. The Program Files do not need to be installed on the same drive or computer as the License Server files, which allows for more network flexibility. During the workstation configuration stage, a location is created on the local workstation for output files and settings called the Workstation folder. The names and locations of all of these folders are stored in the registry. The registry entries are automatically created when AutoTURN is installed, but they can be changed after installation if desired by using the AutoTURN Pro 3D Configuration Utility. Permissions required during Server installation: Folder Contents Program Files License Server Shared Data Permissions required after Server installation: Folder Contents Program Files License Server Shared Data Permissions required during Workstation installation: Folder Contents Program Files User Data Permissions required after Workstation installation: Folder Contents Program Files User Data Permissions Read & Execute Full Control
Page 2
Page 2
For information on the user data location, see Default User Data Location.
Page 3
Network Configuration
During the installation process, AutoTURN Pro 3D is configured to run the Program Files from the workstation to reduce network traffic. In addition, each workstation is configured to access the License Server to verify the license.
Page 4
Page 5
Page 6
Double-click the AutoTURN Pro 3D for MicroStation desktop icon. In the Start, All Programs, AutoTURN Pro 3D folder, click the AutoTURN Pro 3D for MicroStation shortcut icon From within MicroStation: 1. Start MicroStation and open a design file. 2. In a key-in window, type mdl load "C:\Program Files\Transoft Solutions\AutoTURN 8\application.ma" (replace "application.ma" with an .ma file name that is appropriate for your version of MicroStation, and, if you installed AutoTURN Pro 3D 8 to a different location, use the actual path of the .ma file). ---OR---1. Start MicroStation and open a design file. 2. On the MicroStation main menu, click Utilities, MDL Applications. 3. Click Browse. 4. Select an appropriate .ma file for your version of MicroStation, and then click OK.
If the program has not been authorized yet, see Authorizing AutoTURN Pro 3D. Once the program is loaded, all commands can be accessed from the AutoTURN Pro 3D toolbar. If the toolbar is closed, it can be restored by typing 'AT TOOLS' in the key-in window. Note: For information on the compatibility of .ma files with different versions of MicroStation, see the AutoTURN Application File Compatibility By Platform (MicroStation) table below.
Page 7
Application File
AT2010.arx
AT2013.arx AT2008x64.arx
AT2010x64.arx
AT2013x64.arx
Note: Using AutoTURN Pro 3D may require the latest Update and/or Service Pack to be installed for a particular AutoCAD version.
Application File
Page 8
Page 6
Page 9
Copyrights
All rights reserved. No portion of this document may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine readable form without prior written consent from Transoft Solutions Inc. AutoTURN Pro 3D is protected by copyright and any copying for use by third parties without the express written permission of Transoft Solutions Inc. is prohibited. Federal and provincial laws provide for the protection of this computer program and its documentation. Any persons found in violation of the above copyright protection will be prosecuted to the full extent of the law. AutoTURN Pro 3D is a trademark of Transoft Solutions Inc. AutoCAD is a registered trademark of Autodesk Inc. MicroStation is a registered trademark of Bentley Systems, an Intergraph affiliate. Transoft Solutions Inc. is a Registered Developer with Autodesk Inc. Microsoft, Windows, Windows 2000/XP/Vista/7, and/or other Microsoft products referenced herein are either trademarks or registered trademarks of Microsoft. 2012, Transoft Solutions Inc.
Page 7
Page 10