Professional Documents
Culture Documents
Application procedure Mixing: When gauging by hand: dry measure out the aggregate and cement and sprinkle the FEBOXIDE on the heap. The ingredients should be turned over dry and then water added and mixed in the normal manner. When mixing by machine: place the aggregates and cement in the mixing drum, add the FEBOXIDE and mix dry for at least 30 seconds. Add gauging water and mix as normal.
FEB OXIDE
The formation of stains or patches on coloured concrete can be due to various reasons: efflorescence of lime or presence of mould oil are two common causes. Minimum water addition will reduce efflorescence and chemical release agents, such as RHEOFINISH 202, reduce staining. Smooth surfaces show efflorescence more than textured surfaces. Note Field service, where provided, does not constitute supervisory responsibility. For additional information contact your local MBT representative. MBT reserves the right to have the true cause of any difficulty determined by accepted test methods. Quality and care All products originating from MBTs Dubai, UAE facility are manufactured under a management system independently certified to conform to the requirements of the quality, environmental and occupational health & safety standards ISO 9000, ISO 14001 and OHSAS 18001.
06/2003 MBT-ME
* Properties listed are only for guidance and are not a guarantee of performance.
P.O. Box 37127, Dubai, U.A.E. Fax: +971 4 8851002 e-mail: marketing@mbt-middle-east.com
Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty is given or implied with any recommendations made by us, our representatives or distributors, as the conditions of use and the competence of any labour involved in the application are beyond our control.
Certificate No: 945787
As all MBT technical datasheets are updated on a regular basis it is the user's responsibility to obtain the most recent issue.