You are on page 1of 3

SAFETY DATA SHEET

ROCOL Anti-Seize Compound 251


14143 3.00 GB EN 21.02.1997 MSDS.EN

SAFETY DATA SHEET Ref. No. 1.

14143

PRODUCT AND COMPANY IDENTIFICATION


Trade Name Manufacturer/Supplier Address ROCOL Anti-Seize Compound 251 ROCOL Limited ROCOL House, Swillington, Leeds, LS26 8BS, ENGLAND. +44 (0) 113 2322700 +44 (0) 113 2322760 +44 (0) 113 2322600

Phone Number Fax Number Emergency Phone Number

2.

COMPOSITION/INFORMATION ON THE COMPONENTS


Hazardous Components in Product for EC Component Name No constituents need to be specified. Concentration 0.00 - 100.00 R Phrases Classification

3.

HAZARD IDENTIFICATION
Main Hazards Health Effects - Eyes Health Effects - Skin Not classified as hazardous. May cause slight transient irritation. Repeated and/or prolonged contact may lead to dermatitis.

4.

FIRST AID MEASURES


First Aid - Eyes Wash out eye with plenty of water. Obtain medical attention if soreness or redness persists. Wash skin with soap and water. Do not induce vomiting. Obtain medical attention.

First Aid - Skin First Aid - Ingestion

5.

FIRE FIGHTING MEASURES


Extinguishing Media Unsuitable Extinguishing Media Special Hazards of Product Protective Equipment for Fire-Fighting Use foam, dry chemical or carbon dioxide. Do not use water jet. Decomposition products include hydrogen fluoride. Wear self contained breathing apparatus.

6.

ACCIDENTAL RELEASE MEASURES


Personal Precautions Spillages Material can create slippery conditions underfoot. Transfer into suitable containers for recovery or disposal.

MSDS.EN

Page 1 of 3

SAFETY DATA SHEET

ROCOL Anti-Seize Compound 251


14143 3.00 GB EN 21.02.1997 MSDS.EN

7.

HANDLING AND STORAGE


Handling Storage No special precautions necessary. Storage temperature should be controlled to between 1 and 40 C.

8.

EXPOSURE CONTROLS/PERSONAL PROTECTION


Engineering Control Measures Hand Protection Eye Protection Body Protection No specific measures necessary. PVC or rubber gloves. No specific measures necessary. Normal work wear.

9.

PHYSICAL AND CHEMICAL PROPERTIES


Physical State Colour Odour Flash Point (PMCC) (C) Solubility in Water (kg/m3) Density (kg/m3) Auto-flammability (C) Paste. Black. Faint. Exceeds 100. Insoluble. 1.1. (measured as kg/litre) Above 150.

10.

STABILITY AND REACTIVITY


Stability Conditions to Avoid Materials to Avoid Hazardous Decomposition Products Stable under normal conditions. No specific measures necessary. Strong oxidising agents. Combustion will generate: smoke, possibly thick and choking, resulting in zero visibility. Combustion may also generate: toxic and acidic fumes.

11.

TOXICOLOGICAL INFORMATION
Acute Toxicity Low order of acute toxicity.

12.

ECOLOGICAL INFORMATION
Mobility The product is insoluble in water. The product is poorly absorbed onto soils or sediments. The product is expected to be resistant to biodegradation. Product is not expected to bioaccumulate.

Persistence/Degradability Bio-accumulation

13.

DISPOSAL
Product Disposal Container Disposal Incineration or landfill. Dispose of in accordance with all applicable local and national regulations. No specific measures necessary.

MSDS.EN

Page 2 of 3

SAFETY DATA SHEET

ROCOL Anti-Seize Compound 251


14143 3.00 GB EN 21.02.1997 MSDS.EN

14.

TRANSPORT INFORMATION
UN Class ADR/RID - Class IMDG - Class IATA - Class Not classified. Not classified. Not classified. Not classified.

15.

REGULATORY INFORMATION Labelling Information


R phrases S phrases None. None.

16.

OTHER INFORMATION
Product Use MSDS first issued MSDS data revised For industrial use only. Prevention of seizure of threaded components. 18 juni 1996 21 februari 1997

17.

NATIONAL LEGISLATION
EC Legislation EC Directive 91/155/EEC defining the laying down and detailed arrangements for the system of specific information relating to dangerous preparations. EC Directive 88/379/EEC relating to the classification, packaging and labelling of dangerous preparations.

To the best of our knowledge, the information contained herein is accurate. Although certain hazards may be described we cannot predict that these are the only hazards, or combination of hazards, that may exist in a workplace. This MSDS, therefore, forms a component only of a risk assessment carried out by, or on behalf of, the user.

MSDS.EN

Page 3 of 3

You might also like