Professional Documents
Culture Documents
Standard:
Sp 0,2 Yield strenght EN 1706 Mpa 90 100 140 DIN 1725 N/mm2 100 - 150 110 - 160 DIN 1725 N/mm2 160 - 200 180 - 240 -
A Elongation
EN 1706 DIN 1725
% 1 1 1
% 1-3 1-3 -
HB 65 - 90 70 - 110 -
150 170 -
240
PHYSICAL PROPERTIES (indicative values subject to the UNI EN and ex DIN Standards)
DENSITY MELTING RANGE or MELTING POINT SPECIFIC HEAT (at 100) LINEAR SHRINKAGE IN SAND PROCESS LINEAR SHRINKAGE IN SHELL PROCESS LINEAR SHRINKAGE IN HIGH PRESSURE ELECTRIC CONDUCTIVITY MODULUS OF ELASTICITY 14 - 18 MS/m 7500 Kg/mm 2.76 Kg/dm 500 600 0.88 J/Gk 1.0 - 1.2 % 0.6 - 0.9 % THERMAL CONDUCTIVITY at 20C LINEAR THERMAL EXPANSION from 20 t 100 LINEAR THERMAL EXPANSION from 20 t 200 LINEAR THERMAL EXPANSION from 20 t 300 SUGGESTED MAXIMUM TEMPERATURE SUGGESTED CASTING TEMPERATURE in sand in shell in pressure die 680 - 750 680 - 750 110 - 130 W/(m K) 21 10-6/K 750
RESISTANCE TO HOT TEARING PRESSURE TIGHTNESS WELDABILITY DECORATIVE ANODISING PROTECTIVE ANODISING
Raffmetal S.p.a. via malpaga, 82 25070 Casto (BS) tel:0365.890.100 fax 0365.899.327 q @ qualita@raffmetal.it vendite@raffmetal.it
RAFFMETAL
THE ALUMINIUM EVOLUTION
Standard:
TYPICAL USE
Alloy with many uses, complex casting and casting with thin walls; resistant to high temperatures. Use in the motor industry and in the building sector Alloy not in compliance with the EN 601 foodstuff Standard
HEAT TREATMENTS
Heat treatments are not generally performed on this alloy; however, however the following treatments can be performed to increase the mechanical properties of the same: Hardening at 520 for 6 - 10 hours. Complete Artificial Aging at 160C for 8 - 12 hours.
Limitationofliability Thecontentsofthesetechnicalsheetsgaveaninformativepurposeanddonotconstituteawarrantyregardingthepropertiesstated.Thedecisionsbasedonthisinformationaretakenunder theresponsibilityandriskoftheuseranddonotexcludeitfromtheverification.Iftheformerarenotcarriedout,wedonotassumeanyliability.
Raffmetal S.p.a. via malpaga, 82 25070 Casto (BS) tel:0365 890 100 fax 0365 tel:0365.890.100 0365.899.327 899 327 qualita@raffmetal.it vendite@raffmetal.it