Professional Documents
Culture Documents
Page 1 of 1
Program
Programming defines the operations that will machine the part.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
FACING CENTERLINE_SPOTDRILL CENTERLINE_DRILLING ROUGH_TURN_OD GROOVE_OD FINISH_TURN_OD ROUGH_BORE_ID FINISH_BORE_ID GROOVE_ID FINISH_BORE_ID_1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Be sure Turning_Exp has been selected from the Type list. Turning_Exp
Click FACING
The operation will be placed in the 1234 program. It will use the part and blank geometry you specified in WORKPIECE and the parameters you defined in AVOIDANCE. It will use the OD_80_L tool defined by the setup. The LATHE_FINISH method removes all stock. Click OK.
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
In the Axial Trim Plane 1 section of the dialog box, select Point from the Limit Option list. Limit Option Select the end of the curve. Point
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Click OK to complete the facing operation. Click Program Order View and expand 1234. FACING is the first operation in the program. 1234 FACING
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Spot drill
Page 1 of 1
Spot drill
You will create an operation that spot drills the hole.
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
From the Tool Display list, select 2D. Tool Display Click OK. 2D
Click Generate
Click OK to complete the centerline spot drilling operation. 1234 FACING CENTERLINE_SPOTDRILL
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Drill
Page 1 of 1
Drill
You will create an operation that drills the 19 mm diameter hole.
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Geometry AVOIDANCE Method Click OK. In the Start Point and Depth section of the dialog box, select Shoulder Depth from the Depth Option list. Depth Option Type 110 in the Distance box. Shoulder Depth LATHE_CENTERLINE
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
From the Tool Display list, select 2D. Tool Display Click OK. 2D
Click Generate
Click OK to complete the centerline drilling operation. 1234 FACING CENTERLINE_SPOTDRILL CENTERLINE_DRILLING
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Click Display
The operation uses the axial containment plane defined in CONTAINMENT to limit the cut region.
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Zoom In
on the groove and notice that the tool path cuts down into the groove.
This can be corrected by omitting the Reversal Mode. This will prevent the tool from descending into smaller diameter areas in the part. From the Reversal Mode list, select Omit. Reversal Mode Omit
Click Generate
Click OK to complete the roughing operation. 1234 FACING CENTERLINE_SPOTDRILL CENTERLINE_DRILLING ROUGH_TURN_OD
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Click OD_GROOVE_L
Select STATION_06 from the Tool list. Click OK. Click OK to complete the tool.
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Click OK. From the Cut Depth list, select Constant. Cut Depth Constant
file:///C:/Users/bogdan/Desktop/camex_turn/programming210.html
18-May-11
Page 1 of 2
Define trim planes These steps define two trim planes that constrain the cut region to the inside of the groove.
In the Trim Point 1 section of the dialog box, select Specify from the Point Option list. Point Option Specify
Select the top of the vertical line on the left side of the groove as illustrated below.
Click OK. In the Trim Point 2 section of the dialog box, select Specify from the Point Option list. Point Option Specify
file:///C:/Users/bogdan/Desktop/camex_turn/programming220.html
18-May-11
Page 2 of 2
Select the top of the vertical line on the right side of the groove as illustrated below.
file:///C:/Users/bogdan/Desktop/camex_turn/programming220.html
18-May-11
Page 1 of 1
Click Generate
file:///C:/Users/bogdan/Desktop/camex_turn/programming230.html
18-May-11
Page 1 of 1
Specify non-cutting moves These steps specify a motion to the return point that avoids colliding with the part. Click Non-Cutting Moves Click the Departure tab. In the Motion to Return Point / Clearance Plane section, select RadialAxial from the Motion Type list. Motion Type Radial->Axial .
file:///C:/Users/bogdan/Desktop/camex_turn/programming240.html
18-May-11
Page 1 of 1
Click Generate
Click OK to complete the grooving operation. 1234 FACING CENTERLINE_SPOTDRILL CENTERLINE_DRILLING ROUGH_TURN_OD GROOVE_OD
file:///C:/Users/bogdan/Desktop/camex_turn/programming250.html
18-May-11
Page 1 of 1
Finish the outside diameter You will create an operation that finishes the outside diameter of the part.
file:///C:/Users/bogdan/Desktop/camex_turn/programming260.html
18-May-11
Page 1 of 1
Click OK to complete the finishing operation. 1234 FACING CENTERLINE_SPOTDRILL CENTERLINE_DRILLING ROUGH_TURN_OD GROOVE_OD FINISH_TURN_OD
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Click OK to complete the finishing operation. 1234 FACING CENTERLINE_SPOTDRILL CENTERLINE_DRILLING ROUGH_TURN_OD GROOVE_OD FINISH_TURN_OD
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Click ID_55_L
Select STATION_07 from the Tool list. Click OK. Type 0.4 in the Nose Radius box. Type 5 in the Length box to define the cutting edge. Click the Holder tab. Type the following values. (L) Length 100.0000 (W) Width 10.0000 (SW) Shank Width 10.0000 (SL) Shank Line 10.0000 Click OK to complete the tool.
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Geometry AVOIDANCE Method Click OK. Select Omit from the Reversal Mode list. Reversal Mode Omit LATHE_ROUGH
Omitting the Reversal Mode will prevent the tool from descending into the groove.
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Click OK to complete the roughing operation. 1234 FACING CENTERLINE_SPOTDRILL CENTERLINE_DRILLING ROUGH_TURN_OD GROOVE_OD FINISH_TURN_OD ROUGH_BORE_ID
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Click OK to complete the finishing operation. 1234 FACING CENTERLINE_SPOTDRILL CENTERLINE_DRILLING ROUGH_TURN_OD GROOVE_OD FINISH_TURN_OD ROUGH_BORE_ID FINISH_BORE_ID
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Click ID_GROOVE_L
Select STATION_08 from the Tool list. Click OK. Click the Holder tab. Clear the Use Turn Holder check box. Click OK. Click OK to complete the tool.
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Under Motion to Start Point, select RadialAxial from the Motion Type list, Motion Type Radial->Axial
Under Motion to Start of Engage, select RadialAxial from the Motion Type list, Motion Type Click the Departure tab. Under Motion to Return Point / Clearance Plane, select RadialAxial from the Motion Type list. Motion Type From the Point Option list, select Point. Point Option Point Radial->Axial Radial->Axial
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Click OK to complete the grooving operation. 1234 FACING CENTERLINE_SPOTDRILL CENTERLINE_DRILLING ROUGH_TURN_OD GROOVE_OD FINISH_TURN_OD ROUGH_BORE_ID FINISH_BORE_ID GROOVE_ID
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
In the Trim Point 1 section of the dialog box, select Specify from the Point Option list. Point Option Specify
Click OK. In the Trim Point 2 section of the dialog box, select Specify from the Point Option list. Point Option Specify
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Select the Direct Engage to Trim Point check box. Direct Engage to Trim Point Click the Approach tab. Under Motion to Start of Engage, select RadialAxial from the Motion Type list, Motion Type Click the Departure tab. Under Motion to Return Point / Clearance Plane, select Clear AxialDirect from the Motion Type list. Motion Type Clear Axial->Direct Radial->Axial
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Page 1 of 1
Click OK to complete the finishing operation. 1234 FACING CENTERLINE_SPOTDRILL CENTERLINE_DRILLING ROUGH_TURN_OD GROOVE_OD FINISH_TURN_OD ROUGH_BORE_ID FINISH_BORE_ID GROOVE_ID FINISH_BORE_ID_1 This concludes the programming session. After a quick review, you will be ready to create the output.
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11
Review
Page 1 of 1
Review
The programming session defined the sequence of turning operations that machine the part. 1. Creating the Program defined the sequence of operations that cut the part. 1234 FACING CENTERLINE_SPOTDRILL CENTERLINE_DRILLING ROUGH_TURN_OD GROOVE_OD FINISH_TURN_OD ROUGH_BORE_ID FINISH_BORE_ID GROOVE_ID FINISH_BORE_ID_1 2. Generating Tool Paths allowed you to see the tool path and material removal.
file:///C:/Program%20Files/UGS/NX%206.0/MACH/tutorials/english/camex_turn/pro... 18-May-11