You are on page 1of 2

Cisco Consumer Business Group Product: WRT54G v7 Classification: Firmware Release History Firmware version : 7.00.

8 Release date : July 9, 2009 -------------------------------------------------------General Notes: - It is compatible only with hardware version 7.0. Not compatible with any othe r hardware versions. - This firmware is only for usage in Europe and Asia Pacific. - Disconnect all wireless clients from the router during the upgrade process. M ake sure no wireless clients attempt to associate with the router until the upgr ade process is complete. Firmware 7.00.8 (build 8) - Resolves issue with not being able to block IPSec pass-through. - Resolves issue with router disconnecting from several particular online game s ervers. - Resolves issue with user not being able to get incoming video and audio when v ideo phone is connected to the LAN hosted by the router. - Resolves issue with WEP 64-bit key not being properly validated when user ente rs the key. - Resolves issue with disabling UPnP not being effective until the router is reb ooted. - Resolves issue with Wireless MAC Filter not working properly when there are mo re than 32 entries in filter list. - Better handling of TCP packet with invalid option field. - Resolves issue with router intermittently losing internet connectivity (DHCP) with a particular ISP - Updated TZO.com DDNS service support. Firmware 7.00.6 - Resolved UPnP security issue. - Resolved BitSpirit (BitTorrent client) issue. - Add 'service name' field in PPPoE Internet connection setup. Firmware 7.00.3 - Resolved interoperability issue with WAP54G and WRE54G in WPA-PSK mode. - Resolved intermittent reboot issue when BitTorrent is running. - Improved wireless data rate performance. - Resolved issue with router assigns declined IP address to LAN host. - Fine-tune QoS module algorithm. - Resolved reboot issue with fragmentation threshold being set to value less tha n 1500. - More extensive validation in QoS and diagnostics configuration. - Fixed minor wireless MAC filtering configuration GUI display issue. - Resolved issue with saving RADIUS passphrase. - Fixed minor routing policy configuration GUI display issue. - Resolved issue of RIP request packets not being sent out after switching to ro uter mode. - Resolved issue of logging the same event more than once when log function is e nabled. - Resolved issue of unexpected clearing of log when user stops and closes tracer oute.

- Resolved issue of not being able to accessing some configuration settings afte r changing password. - Fixed incorrect beacon interval acceptable range. - Enhanced "Port Range Forward" policies validation. - Fixed problem of not storing DNS address(es) correctly if static DNS address(e s) is/are used. - For security purpose, "Clone Your PC's MAC" functionality is no longer availab le if user accesses router remotely. - Resolved issue of displaying incorrect HTTPS certificate message. - Fixed problem in QoS configuration validation. - Fixed incorrect supported rates in beacon packets when wireless mode is set to 'mixed'. - Resolved reboot issue with setting beacon interval to value greater than 5000. - Corrected ARP exchange behavior on WAN interface (DHCP mode) after obtaining I P address via DHCP. - Corrected PPTP connection behavior when PPTP mode is set to "on-demand" mode. - Resolved issue with not being able to set UPnP policy with port number less th an 1024. - Fixed problem of DMZ feature not functioning correctly. - Resolved issue with not showing the most up-to-date connection status on WAN i nterface in MS Windows XP via UPnP. - Resolved issue with LAN host intermittently not being able to obtain IP addres s from router via DHCP when DHP server is enabled. - Resolved reboot issue of running BitTorrent on host computer while UPnP has be en enabled on the router. - Resolved issue with IP address assignment via DHCP on some particular devices. - Corrected DHCP protocol stack behavior when switching from PPPoE mode to DHCP mode. - Resolved issue of beacon packets not being sent with the correct interval if b eacon interval has been set to some particular values. - Corrected "Access Restriction" behavior when system time is not available. - Resolved issue of not trying alternative DNS if the preferred DNS does not res pond. Firmware 7.00.1 - Initial Release

You might also like