Professional Documents
Culture Documents
27
27-2
Starter
Engine cover Engine, Mechanics; Rep. Gr. 10. Noise insulation Engine, Mechanics; Rep. Gr. 10.
Removing
Disconnect connector -1- (terminal 50). Unscrew cable -2- (terminal 30) from the solenoid
switch -3- (13 Nm).
2
S27-0065
Release both hexagon nuts -arrows- (65 Nm) and remove the starter from below -1-.
S27-0066
Disconnect connector -1- (terminal 50). Unscrew cable -3- (terminal 30) from the solenoid
switch -2- (13 Nm).
2 3
S27-0067
Starter
27-2 page 1
27
Release the three Allan screws -arrows- (65 Nm) and
remove the starter from the top -1-.
1
Installing
S27-0068
27-2 page 2
Starter
27
27-3
Alternator
N27-0174
(breakdown).
Risk of fire resulting from sparking. Damage resulting from overvoltages on electronic
N27-0175
N27-0172
Alternator
27-3 page 1
27
Unscrew the bolts -arrows- attaching the voltage regulator and take off the voltage regulator.
N27-0173
Use the socket insert -T30032 (3310)- to release or attach the V-ribbed belt pulley from/to the AC generator. Tightening torque of nut attaching ribbed V-belt pulley of generator is 65 Nm.
Removing and installing the V-ribbed belt pulley with free wheel
Special tools, test and measuring equipment and auxiliary items required
Torque wrench Universal adapter for removing and installing ribbed
T30032
S27-0069
27-3 page 2
Alternator
27
Position direction of rotation of torque wrench to left. Adjust a tightening torque of 80 Nm on the torque
wrench.
Counterhold universal adapter for removing and installing poly V-belt pulley -MP 1-309- with ring wrench size 17 and tighten freewheel belt pulley to a torque of 80 Nm by turning drive shaft left by means of torque wrench.
MP 1-309
S27-0070
Alternator
27-3 page 3