Professional Documents
Culture Documents
Connect the circuit to ground Link the temperature of one component in the circuit to that of another component in the circuit
In household electrical wiring, which color of insulation indicates the 'hot' wire?
Copper
Red
Black
Green
A circuit with a 120-volt power supply is protected by a 5-amp circuit breaker. What is the largest number of watts an appliance on this circuit can safely use?
600W
2.4W
6,000W
24.0W
Regarding magnets, what is the ease with which a substance passes magnetic lines?
Magnetic flux
Retentivity
Permeability
Reluctance
Resistor
Transistor
AC Power Supply
Capacitor
Solutions
Connect the circuit to ground Link the temperature of one component in the circuit to that of another component in the circuit
SOLUTION
A thermocouple is a thermal sensor that works like a switch to either open or close a part of the circuit at a designated temperature.
In household electrical wiring, which color of insulation indicates the 'hot' wire?
Copper
Red
Black
Green
SOLUTION
In the NM cable used for wiring homes, each cable has three wires inside a sheath with each wire covered in a different color of insulation to indicate its type. The wire with the black insulation is the 'hot' wire, white is the neutral wire, and the ground wire is either covered in green insulation or left bare.
A circuit with a 120-volt power supply is protected by a 5-amp circuit breaker. What is the largest number of watts an appliance on this circuit can safely use?
600W
2.4W
6,000W
24.0W
SOLUTION
Wattage is current multiplied by voltage: W = IV. So, the maximum amount of power a 120-volt circuit with a 5A circuit breaker would allow is 120V x 5A = 600W.
Regarding magnets, what is the ease with which a substance passes magnetic lines?
Magnetic flux
Retentivity
Permeability
Reluctance
SOLUTION
Magnets have several properties that describe them. Permeability is the ease with which a substance passes magnetic lines and reluctance, its opposite, is the opposition that a substance offers to magnetic lines. Retentivity measures the degree to which a substance remains magnetized after the magnetizing force is removed. Magnetic flux is the quantity of magnetism expressed by total number of magnetic lines of force and flux density measures the strength of magnetic flux across a unit of area (typically 1 cm2).
Resistor
Transistor
AC Power Supply
Capacitor
This sample test is from the ASVAB Test Bank Get unlimited unique online ASVAB practice tests at www.asvabtestbank.com