You are on page 1of 16

If you want to obtain a copy of any the following Draft Ethiopian Standards, email: info@ethiostandards.org or Yilma@ethiostandards.

org For further information on draft Ethiopian standards, please contact us at +251 116-460567 or Fax: +251 116-460880/81

TC 47
S.N.

Designation Document Title Slotted countersunk flat head screws (common head style) Product grade A Rolling bearings Instrument precision bearings Part 1: Boundary dimensions, tolerances and characteristics of metric series bearings Plain bearings Wrapped bushes Part 6: Checking the inside diameter Plain bearings Wrapped bushes Part 7: Measurement of wall thickness of thin-walled bushes Button head screws Part 1: Hexagon socket button head screws Button head screws Part 2:Hexagon socket button head screws with collar Information processing-9 track.12,7mm(0.5in) wide magnetic tape for information interchange format and recording,using group codin at 246 cpmm (6250 cpi) Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 1:General
FDES No. ES No. New

Status ()
Reaffirmed Revised

1. 2.

2009 1224-1

ES ISO 2009: 2012 ES ISO 1224-1:2012

3. 4.

3547-6 3547-7

ES ISO 3547-6:2012 ES ISO 3547-7:2012

5. 6. 7.

7380-1 7380-2 5652

ES ISO 7380-1:2012 ES ISO 7380-2:2012 ES ISO 5652:2012

8.

1452-1

ES ISO 1452-1:2012

S.N.

Designation Document Title Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 2:Pipes and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 4: Valves Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 5:Fitness for purpose of the system Thermoplastics pipes Longitudinal reversion Test method and parameters Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1:General Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 2: Pipes Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 3:Fittings Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 5: Fitness for purpose of the system Vacuum technology Mounting dimensions of pipeline fittings Part 1: Non knife-edge flange type Vacuum technology Mounting dimensions of pipeline fittings Part 2: Knife-edge flange type
FDES No. ES No. New

Status ()
Reaffirmed Revised

9.

1452-2

ES ISO 1452-2:2012

10.

1452-4

ES ISO 1452-4:2012

1452-5 ES ISO 1452-5:2012

11.

1205 4427-1 ES ISO 2505:2012 ES ISO 4427-1:2012 4427-2 ES ISO 4427-2:2012

12. 13.

14.

15.

4427-3

ES ISO 4427-3:2012

16.

4427-5

ES ISO 4427-5:2012

17. 18.

ES ISO 9803-1:2012

ES ISO 9803-2:2012

S.N.

Designation Document Title Restrained joint systems for ductile iron pipelines Design rules and type testing Non-destructive testing of steel tubes Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections Non-destructive testing of steel tubes Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections Fans Dimensions Oxygen/fuel gas blowpipes (cutting machine type) with cylindrical barrels - General specifications and test methods Metallic and other inorganic coatings Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium Assembly tools for screws and nuts Screwdrivers for slotted-head screws Part 1: Tips for hand- and machine-operated screwdrivers Assembly tools for screws and nuts Screwdrivers for slotted-head screws Part 2: General requirements, lengths of blades and marking of handoperated screwdrivers
FDES No. ES No. New

Status ()
Reaffirmed Revised

19. 20.

ES ISO 10804:2012 ES ISO 108933:2011(E)


21.

ES ISO 10893-6::2012 ES ISO 10893-8:2012

22.

23.

ES ISO 10893-9:2012

24.

ES ISO10893-11:2012

25. 26. 27.

389-7 389-8

ES ISO 13351:2012 ES ISO 5186:2012 ES ISO1456:2012

28.

389-9

ES ISO 2380-1:2012

29.

8253-1

ES ISO 2380-2:2012

S.N.

Designation Document Title Gas welding equipment Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa Welding consumables Covered electrodes for manual metal arc welding of stainless and heat-resisting steels Classification Metallic and other inorganic coatings Electrodeposited silver and silver alloy coatings for engineering purposes Specification and test methods Metal-cutting band saw blades Part 2: Characteristics and dimensions Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests Tool holders for internal turning with cylindrical shank for indexable inserts Part 1:Designation, styles, dimensions and calculation for corrections Anodizing of aluminium and its alloys Measurement of abrasion resistance of anodic oxidation coatings Anodizing of aluminium and its alloys Specification for hard anodic oxidation coatings on aluminium and its alloys Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 1: General principles of design and corrosion resistance Non-destructive testing of welds Radiographic testing Part 1: Xand gamma-ray techniques with film Non-destructive testing of welds Radiographic testing Part 2: Xand gamma-ray techniques with digital detectors Metallic and other inorganic coatings Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes Specification and test methods Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 1:Determination of resistance to chemical corrosion by acids at room temperature
FDES No. ES No. New

Status ()
Reaffirmed Revised

30.

8253-2

ES ISO 2503:2012

31. 32. 33. 34. 35.

8253-3 1953 1999 7029 11904-1

ES ISO 3581:2012 ES ISO 4521:2012 ES ISO 4875-2:2012 ES ISO 5172:2012 ES ISO 5609-1:2012

36. 37. 38.

11904-2 12124 10217

ES ISO 8251:2012 ES ISO 10074:2012 ES ISO 14713-1:2012

39. 40. 41.

16832 16 1683

ES ISO 17636-1:2013 ES ISO 17636-2:2013 ES ISO 27874:2012

42.

ES ISO 28706-1:2012

S.N.

Designation Document Title Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours Vitreous and porcelain enamels Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron Conveyor belts with - Heat resistance - rubber cover requirement and Test method Conveyor belts Transverse flexibility (troughability) Test method Cranes Requirements for mechanisms Part 1: General Cranes Requirements for mechanisms Part 2: Mobile cranes Cranes Requirements for mechanisms Part 3: Tower cranes Cranes Requirements for mechanisms Part 4: Jib cranes Cranes Requirements for mechanisms Part5: Bridge and gantry cranes
FDES No. ES No. New

Status ()
Reaffirmed Revised

43.

28706-2

ES ISO 28706-2:2012

44. 45. 46. 47. 48. 49. 50. 51.

28764 4195 703 10972-1 10972-2 10972-3 10972-4 10972-5


7-2 7-1 68-1 260 262 724 898-1 898-2

ES ISO28764:2012 ES ISO 4195: 2008 ES ISO 703:2012 ES ISO 10972-1:2012 ES ISO 10972-2:2009 ES ISO 10972-3:2012 ES ISO 10972-4:2012 ES ISO 10972-5:2012
ES ISO 7-2:2005 ES ISO 7-1:2002 ES ISO 68-1:2003 ES ISO 260:2003 Es iso 262:2003 ES ISO 724:2003 ES ISO 898-1:2002 ES ISO 898-2:2002

52. Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges 53. pipe threads whe4re pressure-tight joints are made on the threads part 1 dimensions, tolerances and designation 54. ISO general purpose screw threads basic profile Part 1: Metric screw threads 55. ISO general purpose metric screw threads- General plan 56. ISO general purpose metric screw threads-Selected sizes for screws, bolts and nuts 57. ISO general purpose metic screw threads-Basic dimensions 58. Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs 59. Mechanical properties of fasteners Part 2 Nuts with specified roof load valves-Coarse thread

S.N.

Designation Document Title


FDES No. 898-6 898-7 ES No. ES ISO 898-6:2005 ES ISO 898-7:2005 New

Status ()
Reaffirmed Revised

60. Mechanical properties of fasteners Part 6 Nuts with specified proof load values-Fine pitch thread 61. Mechanical properties of fasteners Part 7 Torsional test and minimum torques for bolts and srews with nominal diameters 1 mm to 10 mm 62. ISO general purpose metric screw threads-Tolerances Part 1 Principles and basic data 63. ISO general purpose metric screw threads-Tolerances Part 2: Limits of sizes for general purpose external and internal screw threadsMedium quality 64. ISO general purpose metric screw threads-Tolerances Part 3: Deviation for constructional screw threads 65. ISO general purpose metric screw threads-Tolerances Pare 4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing 66. ISO general purpose metric screw threads-TolerancesPart 5 Limits of sixes for internal screw threads to mate with hot-dip galvanized external screw threadss with maximum size of tolerance postion h before galvanizing

965-1 965-2

ES ISO 965-1:2003 ES ISO 965-2:2003

965-3 965-4

ES ISO 965-3:2003 ES ISO 965-4:2005

965-5

ES ISO 965-5:2005

TC 51
Designation Document Title Metallic materials Knoop hardness test Part 1: Test method Metallic materials Wire Simple torsion test Metallic materials Fatigue testing Statistical planning and analysis of data Metallic materials Fatigue testing Fatigue crack growth method Structural steels Part.1:General technical delivery conditions for hot-rolled products Structural steels Part.2: Technical delivery conditions for stru ctural steels for general purposes Heat-treatable steels, alloy steels and free-cutting steels Part 2: Alloy steels for quenching and tempering Microstructure of cast irons Part 1: Graphite classification by visual analysis Microstructure of cast irons Part 1: Graphite classification by vis ual analysis Petroleum and natural gas industries Steel pipe for pipeline transportation systems Hot-rolled carbon steel sheet of commercial and drawing qualities Cold-reduced carbon steel sheet of commercial and drawing qualities Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness Metallic materials Dynamic force calibration for uniaxial fatigue testing Part 1: Testing systems Metallic materials Dynamic force calibration fatigue testing Part 2: Dynamic calibration device (DCD)
FDES No. ES No. New

S.N.

Status ()
Reaffirmed Revised

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

4545-1 7800 12107 12108 630-1 630-2 683-2 945-1 945-1 3183 3573 3574 4498 4965-1 4965-2

ES ISO 4545-1:2012 ES ISO 7800:2012 ES ISO 12107:2012 ES ISO 12108:2012 ES ISO 630-1:2012 ES ISO 630-2:2012 ES ISO 683-2:2012 ES ISO 945-1:2012 ES ISO 9451/cor:2012 ES ISO 3183:2012 ES ISO 3573:2012 ES ISO 3574:2012 ES ISO 4498:2012 ES ISO 4965-1:2012 ES ISO 4965-2:2012

S.N.

Designation Document Title Steel castings Liquid penetrant inspection Continuous hot-dip aluminium-siliconcoated cold-reduced carbon steel sheet of commercial and drawing qualities Cold-reduced carbon steel sheet for vitreous enamelling Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities Hot-rolled steel sheet of higher yield strength with improved formability Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance Hot-rolled steel strip of structural quality Hot-rolled carbon steel strip of commercial and drawing qualities Wrought aluminium and aluminium alloys Sheets, strips and plates Part 1:Technical conditions for inspection and delivery Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 3:Extruded rectangular bars Tolerances on shape and dimensions Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 4: Profiles Tolerances on shape and dimensions Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 5:Round, square and hexagonal bars Tolerances on shape and dimensions
FDES No. ES No. New

Status ()
Reaffirmed Revised

16 17 18 19 20 21 22 23 24

4987 5000 5001 5950 5951 5952 6316 6317 6361-1

ES ISO 4987:2012 ES ISO 5000:2012 ES ISO 5001:2012 ES ISO 5950:2012 ES ISO 5951:2012 ES ISO 5952:2012 ES ISO 6316:2012 ES ISO 6317:2012 ES ISO 6361-1:2012

26

6362-3

ES ISO 6362-3:2012

27

6362-4

ES ISO 6362-4:2012

28

6362-5

ES ISO 6362-5:2012

S.N.

Designation Document Title Wrought aluminium and aluminium alloys Cold-drawn rods/bars, tubes and wires Part 4:Drawn rectangular bars and wires Tolerances on form and dimensions Wrought aluminium and aluminium alloys Cold-drawn rods/bars, tubes and wires Part 5:Drawn square and hexagonal bars and wires Tolerances on form and dimensions Corrosion of metals and alloys Stress corrosion testing Part 1: Gene ral guidance on testing procedures Corrosion of metals and alloys Stress corrosion testing Part 6:Preparation and use of precracked specimens for tests under constant load or constant displacement Magnesium and magnesium alloys Unalloyed magnesium Chemical composition Corrosion tests in artificial atmospheres Salt spray tests Steel flat products for pressure purposes Technical delivery conditions Part 1:General requirements Steel flat products for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steels with specified elevated temperature properties Steel flat products for pressure purposes Technical delivery conditions Part 3:Weldable fine grain steels, normalized Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature properties
FDES No. ES No. New

Status ()
Reaffirmed Revised

29

6363-4

ES ISO 6363-4:2012

30

6363-5

ES ISO 6363-5:2012

31 32

7539-1 7539-6

ES ISO 7539-1:2012 ES ISO 7539-6:2012

33 34 35

8287 9227 9328-1

ES ISO 8287:2012 ES ISO 9227:2012 ES ISO 9328-1:2012

36

9328-2

ES ISO 9328-2:2012

37

9328-3

ES ISO 9328-3:2012

38

9328-4

ES ISO 9328-4:2012

S.N.

Designation Document Title Steel flat products for pressure purposes Technical delivery conditions Part 5:Weldable fine grain steels, thermomechanically rolled Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 1:Narrow strip and cut lengths Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2:Wide strip and sheet/plate Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 2:Wide strip and plate/sheet Metallic materials Calibration of extensometer systems used in uniaxial testing Corrosion of metals and alloys Alternate immersion test in salt solution Cold-reduced steel sheet of higher yield strength with improved formability Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet Hot-rolled steel sheet products Dimensional and shape tolerances Cold-rolled steel sheet products Dimensional and shape tolerances Continuously hot-dipped coated steel sheet products Dimensional and shape tolerances Microstructure of cast irons Part 2:Graphite classification by image analysis Non-destructive testing Penetrant testing Part 1:General principles
FDES No. ES No. New

Status ()
Reaffirmed Revised

39

9328-5

ES ISO 9328-5:2012

40

9444-1

ES ISO 9444-1:2012

4`

9444-2

ES ISO 9444-2:2012

42

9445-2

ES ISO 9445-2:2012

43 44 45 46 47 48 49 50 51

9513 11130 13877 14788 16160 162 16163 945-2 3452-1

ES ISO 9513:2012 ES ISO 11130:2012 ES ISO 13877:2012 ES ISO 14788:2012 ES ISO 16160:2012 ES ISO 162:2012 ES ISO 16163:2012 ES ISO TR/9452:2012 ES ISO 3452-1:2012

S.N.

Designation Document Title Non-destructive testing Image quality of radiographs Part 1: Image quality indicators (wire type) Determination of image quality value
FDES No. ES No. New

Status ()
Reaffirmed Revised

52

19232-1

ES ISO 19232-1:2012

TC 64
S.N. Document Title 1 Cartridge fuses for voltages up to and including 1 000 V a.c. and 1 500 V d.c. Part 5: Specification of supplementary requirements for fuse-links for use in a.c. electricity supply networks 2 Specification for residual current-operated circuit-breakers 1423 ES 1423:2005 ES 1634:2005 FDES No. 1276 Designation ES No. ES 1276:2005 New Status () Reaffirmed Revised

3 Specification for single phase street lighting fuses (cut-outs) for low-voltage public 1634 electricity distribution systems. 25 A rating for highway power supplies and street furniture 4 Direct acting indicating analogue electrical measuring instruments and their 1279 accessories. Specification for special requirements for wattmeters and varmeters 5 Electric cable soldering sockets Specification 1287

ES 1279:2005

ES 1287:2005 ES 1349:2005

6 13 A plugs, socket-outlets and adaptors. Specification for 13A fused connection 1349 units switched and unswitched 7 13 A plugs, socket-outlets and adaptors. Specification for adaptors 1348

ES 1348:2005

S.N.

Document Title FDES No. 8 13 A plugs, socket-outlets and adaptors. Specification for 13A fused connection 1349 units switched and unswitched 9 Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-outlet 1925 adaptors 1 13 A plugs, socket-outlets and adaptors. Specification for rewirable and non- 1346 rewirable 13 A fused plugs 1 13 A plugs, socket-outlets and adaptors. Specification for 13A fused connection 1349 units switched and unswitched 1 13 A plugs, socket-outlets and adaptors. Specification for adaptors 1348

Designation ES No. ES 1349:2005

New

Status () Reaffirmed

Revised

ES 1925:2005

ES 1346:2005

ES 1349:2005

ES 1348:2005 ES 1349:2005

1 13 A plugs, socket-outlets and adaptors. Specification for 13A fused connection 1349 units switched and unswitched 1 Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-outlet 1925 adaptors 1 Specification for Protected-type non-reversible plugs, socket-outlets cable-couplers and appliancecouplers with earthing contacts for single phase a.c. circuits up to 250 volts 1 Specification. Flame proof enclosure of electrical apparatus 1291 1289

ES 1925:2005

ES 1289:2005

ES 1291:2005

S.N.

Document Title FDES No. 1 Flexible steel conduit for cable protection and flexible steel tubing to enclose 1312 flexible drives. Flexible steel conduit and adaptors for the protection of electric cable 1 Terminal markings for electrical machinery and apparatus. Terminal markings for 1317 rotating electrical machinery 1 Specification. Rubber mats for electrical purposes 1331 2 Electrical earthing. Clamps for earthing and bonding. Specification 1332

Designation ES No. ES 1312:2005

New

Status () Reaffirmed

Revised

ES 1317:2005 ES 1331:2005 ES 1332:2005 ES 1346:2005

2 13 A plugs, socket-outlets and adaptors. Specification for rewirable and non- 1346 rewirable 13 A fused plugs 2 13 A plugs, socket-outlets and adaptors. Specification for 13A fused connection 1349 units switched and unswitched 2 Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-outlet 1925 adaptors 2 13 A plugs, socket-outlets and adaptors. Specification for adaptors 1348

ES 1349:2005

ES 1925:2005

ES 1348:2005 ES 1349:2005

2 13 A plugs, socket-outlets and adaptors. Specification for 13A fused connection 1349 units switched and unswitched 2 Tubular fluorescent lamps for general lighting service. Specification for lamps 1359 used in the United Kingdom not included in BS EN 60081, BS EN 60901, BS EN 61195 and BS EN 61199 2 Electric cables. Accessories. Bitumen-based filling compounds 1360

ES 1359:2005

ES 1360:2005

S.N.

Document Title 2 Specification for straight concrete and clayware cable covers. 2 Method for determining the thermal classification of electrical insulation 3 Specification for photoelectric control units for road lighting

Designation FDES No. ES No. 1388 ES 1388:2005 1400 1535 ES 1400:2005 ES 1535:2005 ES 1414:2005

New

Status () Reaffirmed

Revised

3 Method of test for temperature coefficient of resistance of alloy wire for precision 1414 resistors 3 Specification for residual current-operated circuit-breakers 1423

ES 1423:2005 ES 1430:2005

3 Luminaires. Particular requirements. Specification for fixed general purpose 1430 luminaires 3 Luminaires. Particular requirements. Specification for luminaires for emergency 1431 lighting 3 Cable trunking. Steel surface trunking 3 Photometric data for luminaires. Photometric measurements 1440 1449

ES 1431:2005

ES 1440:2005 ES 1449:2005 ES 1450:2005

3 Photometric data for luminaires. Method of photometric measurement of battery- 1450 operated emergency lighting luminaires 3 Specification for 600/1000 V and 1900/3300 V armoured electric cables having 1483 thermosetting insulation 3 Electric cables. PVC insulated, non-armoured cables for voltages up to and 1537 including 450/750 V, for electric power, lighting and internal wiring

ES 1483:2005

ES 1537:2005

S.N.

Document Title FDES No. 4 Electric cables. Single core unsheathed heat resisting cables for voltages up to and 1538 including 450/750 V, for internal wiring 4 Specification for PVC-insulated cables for switchgear and controlgear wiring 1558

Designation ES No. ES 1538:2005

New

Status () Reaffirmed

Revised

ES 1558:2005 ES 1563:2005

4 Specification for 600/1000 V and 1900/3300 V armoured electric cables having 1563 PVC insulation 4 Specification for conductors in insulated cables and cords 4Electrical apparatus with protection by enclosure for use in the presence of combustible dusts. Guide to selection, installation and maintenance 1564 1593

ES 1564:2005 ES 1593:2005

4 Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and 1594 equipment intended for domestic, office and similar environments 4 Specification for portable residual current devices 1620

ES 1594:2005

ES 1620:2005 ES 1634:2005

4 Specification for single phase street lighting fuses (cut-outs) for low-voltage public 1634 electricity distribution systems. 25 A rating for highway power supplies and street furniture 4 Specification for insulating and sheathing materials for cables. General 1635 introduction 4 Specification for insulating and sheathing materials for cables. PVC insulating 1636 compounds. Harmonized types

ES 1635:2005

ES 1636:2005

S.N.

Document Title FDES No. 5 Specification for insulating and sheathing materials for cables. PVC insulating 1637 compounds. Hard grade types 5 Nominal voltages for low voltage public electricity supply systems 1638

Designation ES No. ES 1637:2005

New

Status () Reaffirmed

Revised

ES 1638:2005 ES 1642:2005

5 Electric cables. Flexible cables rated up to 450/750V, for use with appliances and 1642 equipment intended for industrial and similar environments 5 Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-outlet 1925 adaptors 5 Isolating transformers and safety isolating transformers. Specification for 1944 transformers for reduced system voltage

ES 1925:2005

ES 1944:2005

You might also like