Professional Documents
Culture Documents
CATALOGUE
FANS
DUCTING
ACOUSTIC
DOMESTIC
INTRODUCTION
Flkt Woods is delighted to announce the launch of an entirely new range of products to the UK, none of which have been readily available before; and all now offered exclusively through our nationwide group of SuperLite Partners. The range includes a revolutionary SuperLite axial fan, a choice of market leading Veloduct sealed fittings, Iris dampers, an innovative roof fan, in addition to fire dampers, valves and domestic fans. The inclusion of duct fittings and fire dampers within the range, which were previously only available outside the UK, is expected to enable the exclusive SuperLite partners to access new markets. The quality and reputation of Flkt Woods fully certified fire and smoke dampers is well-known. When used for early fire detection, linked with a smoke detector and combined with our automated control systems, they provide the optimum modern fire prevention solution. Veloduct is a name well-known to many in the industry, and we are proud to announce that our SuperLite Partners will be stocking a broad range of duct-fitting products, including the renowned Veloduct system of gasket-sealed fittings, as well as high quality valves, dampers, attenuators and other pressed fittings. Also included in the new range is a collection of iris dampers, of both composite and stainless steel design, these dampers are easily adjustable and come in a wide range of sizes, for efficient and effective control of air flow. One of the main attractions is a new product, the SuperLite axial fan range, a light industrial fan, with integral feet and an integral flange and spigot. This unique patented solution allows fast and easy installation in most ducted configurations and also comes as a retrofit configuration where it can replace existing products. It features a fully speed controllable external rotor motor that offers a very compact and versatile solution, suitable for either vertical or horizontal mounting. With a durable paint on galvanised construction, this fan is a modern and innovative addition to the Flkt Woods axial fan range. With all the new products as well as combining our Express range, Flkt Woods again proves to be a world beater with its innovative design and development.
SUPERLITE - INTRODUCTION
1
CONTENTS
FANS JM Aerofoil JM High Temperature JM Bifurcated Series 33 Bifurcated MaXfan JM Accessories SLR SuperLite Cased Fans JM Plate Fans SuperLite Plate Fans Tube (ILC) Fans Box Fan - SingleBox Fans Box Fan - TwinBox Fans Box Fan - Copford Units ERU - e3co Star Roof Unit - DSM and DSC Roof Unit - SuperLite DAMPERS AND VALVES Supply Valve - KE Exhaust Valve - KK Exhaust Valve - VEF-S IRIS Damper Exhaust Fire Valve - KSOP Fire Damper - ETPR-E-1 Fire Damper - ETPR-17 121-125 126-129 130-133 134-139 140-142 143-147 148-150 3-18 19-26 27-32 33-36 37-42 43-47 48-52 53-57 58-61 62-70 71-76 77-80 81-92 93-99 100-112 113-120 DOMESTIC FANS DX100 DX200 and CF20 DX400 and CF40 SL100 and SL150 Xplus 275 Xplus 2 (AC) XIM GX6, GX9 and GX12 PX6, PX9 and PX12 RX6, RX9 and RX12 WX6, WX9 and WX12 USEFUL INFORMATION 163-166 167-170 171-174 175-178 179-182 183-186 191-194 195-198 199-202 203-206 207-210 187-190 ATTENUATORS Introduction Pressure Drops Coding Drawing and Dimensions 159-160 161 162 SEALED FITTINGS Introduction BDEB BDET BDED BDEA BDEA-6 BDEG-4 BDEM-1 BDEN-1 BDEP-1 151-152 153-154 155 155 156 157 157 157 158 158
SUPERLITE - CONTENTS
2
FANS
Fans
Notes
SUPERLITE - JM AEROFOIL
CONTENTS Page
JM Aerofoil JM High Temperature JM Bifurcated Series 33 Bifurcated MaXfan JM Accessories SLR SuperLite Cased Fans JM Plate Fans SuperLite Plate Fans Tube (ILC) Fans Box Fan - SingleBox Fans Box Fan - TwinBox Fans Box Fan - Copford Units ERU - e3co Star Roof Unit - DSM and DSC Roof Unit - SuperLite 3-18 19-26 27-32 33-36 37-42 43-47 48-52 53-57 58-61 62-70 71-76 77-80 81-92 93-99 100-112 113-120
FANS
315mm to 1000mm diameter Volume flows of up to 20 m3/s Static pressures up to 800 Pa High energy efficiency Low installed noise levels
SuperLite - JM Aerofoil
Motor protection IP55 All casings are hot dipped galvanised Overheat protection is fitted as standard Inverter controllable
SIZES
31JM - (315mm) to 100JM - (1000mm) Larger sizes up to 2800mm diameter are also available FAN PERFORMANCE All fans are tested to the latest internationally recognised standard IS05801 Part 1 (1997), installation category D (AMCA approved) for aerodynamic performance and BS848 Part 2 (1985) for acoustic performance. Coupled with a wide range of fan diameters, the adjustable pitch Aerofoil impeller gives the exact performance required, with a non overloading fan characteristic. IMPELLERS A unique high efficiency aerofoil section blade with a purposely smoothed hub and clamp plate for adjustable pitch angle availability. The Flkt Woods impellers are all high pressure die cast to offer thin aerofoil sections for low generation of noise. Every cast aluminium component is X-ray examined using Real Time Radiography inspection prior to assembly. The maximum pitch angles shown allow for speed control by frequency inverter (3ph only). MOTORS All motors are totally enclosed air stream rated class F insulation. Constructed from aluminium or cast iron as standard with special T slot or pad mounted fixings. Single speed motors are suitable for speed control by voltage regulation where indicated. Three phase motors are suitable for use with frequency inverters. Two speed motors where available are pole change type. Suitable for horizontal through to vertical shaft operation. Supplied IP55, with removable drain plugs. Sealed for life bearings lubricated with wide temperature range grease. The BT and CT frames are fitted with overheat protection thermostat as standard. 80-160 frame motors are fitted with Thermistor OHP. These motors are suitable for inverter speed control down to 20% of full speed and where within scope incorporate IE2 compliant motors. ELECTRICAL SUPPLY 220 - 240V / 50Hz / 1 Ph 380 - 420V / 50Hz / 3 Ph
TEMPERATURE RANGE -40C to 50C as standard. (All motors are not suitable for starting at temperatures lower than -20C.). When fans are operating in excess of 50C they should be run at full speed only, fans can be operated up to 70C with appropriate deration of motors. Most standard 3 Ph fans can be offered for a one off emergency operation at 200C for 2 hours. CASINGS JM Aerofoil fans are available in either a long cased form, complete with an externally mounted pre-wired electrical terminal box, or short cased for duct or plate installation. Casings are spun from sheet steel with integral pre-drilled and radiused inlet flanges. The galvanised finish gives a high resistance to corrosion and is ideal for external as well as internal use. ACCESSORIES Silencers, mounting feet, vibration isolators, matching flanges, Ffexible connectors, air operated non return dampers, guards, bell mouth inlets. Electronic and transformer type speed controllers and frequency inverters. For a full range please see pages 43 - 47.
SUPERLITE - JM AEROFOIL
4
FANS
SuperLite - JM Aerofoil
31JM - 35JM
Performance Data
1 Phase
1 - 31JM/16/4/5/36 2 - 35JM/16/4/5/40 3 - 31JM/16/2/5/28 4 - 35JM/16/2/5/34
3 Phase
5 - 31JM/16/4/5/40 6 - 35JM/16/4/5/40 7 - 31JM/16/2/5/34 8 - 35JM/16/2/5/40
4 4 3 3 7 7
8 8
1 1
2 2
5 5
6 6
Ref 1 3 2 4 5 7 6 8
Product Code 31JM/16/4/5/... 31JM/16/2/5/... 35JM/16/4/5/... 35JM/16/2/5/... 31JM/16/4/5/... 31JM/16/2/5/... 35JM/16/4/5/... 35JM/16/2/5/...
m3/s at Pa (Static) 0 0.62 1.07 1.01 1.80 0.68 1.20 1.02 2.03 50 0.57 0.97 0.86 1.75 0.55 1.14 0.87 1.96 1.09 0.64 1.89 1.82 1.74 1.64 1.54 1.28 1.03 0.97 0.90 0.82 0.92 0.64 1.68 1.61 1.55 1.46 1.38 1.16 0.86 0.82 0.72 0.70 0.51 100 150 200 250 300 400
SUPERLITE - JM AEROFOIL
Electrical Data
Ref Product Code Speed rev/min Motor Product Number Pitch Angle () Rating (kW) Full Load Current (A) Starting Current (A) Wiring Diagram Ref Speed Controller Sound Level dBA
220-240V/50Hz/1 Ph 1 3 2 4 31JM/16/4/5/... 31JM/16/2/5/... 35JM/16/4/5/... 35JM/16/2/5/... 1420 2840 1420 2840 BT4 BT9 BT4 CT9 DX321460 DX321202 DX361460 JL361205 40 24-28 40 32-34 0.095 0.48 0.13 1 0.8 3.1 1.0 6.8 1.3 6.7 1.8 21 CD1705 CD1705 CD1705 CD1705
Electronic ME1.1 N/A ME1.1 N/A Transformer 0.13 0.58 0.18 1.32 0.50 1.5 0.6 2.79 1.1 5.7 1.9 14.62 CD2416 CD2416 CD2416 CD2416 MT3.1 N/A MT3.1 N/A
Transformer MT1.1.5 N/A MT1.1.5 N/A Inverter FWX1 FWX1 FWX1 FWX2 44 61 49 63 44 61 49 64
380-420V/50Hz/3 Ph 5 7 6 8 31JM/16/4/5/... 31JM/16/2/5/... 35JM/16/4/5/... 35JM/16/2/5/... 1420 2840 1420 2735 BT4 BT9 BT5 80 DX341460 DX341202 DX381460 EE381274 40 34 40 8-40
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. When fans are operating in excess of 50C they should be run at full speed only. For Short cased fans please omit the prefix from the product number and state S-type on enquiries/ orders. Product numbers shown are for Long cased fans. Wiring diagrams can be found on pages 17 - 18. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note may occur. FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation. B Type 1 diameter length - 7 to 10 dBA. C Type 1 diameter length - 12 to 15 dBA. For full acoustic details and resistance to airflow for type C see publications SP01.
FANS
SuperLite - JM Aerofoil
31JM - 35JM
Dimensions - 31 JM Aerofoil
Size 315
C 330 375
K 245 289
Weight kg Fan 21 27
Dimensions - 35 JM Aerofoil
Size
Weight kg Fan 22 23 24 28 31
355
CT5 CT9 80
SUPERLITE - JM AEROFOIL
6
FANS
SuperLite - JM Aerofoil
40JM - 45JM
Performance Data
1 Phase
1 - 40JM/16/4/5/40 2 - 45JM/16/4/5/30 3 - 45JM/16/4/5/40 4 - 40JM/16/2/5/22 5 - 45JM/16/2/5/14
3 Phase
6 - 40JM/16/4/5/40 7 - 45JM/16/4/5/34 8 - 45JM/16/4/5/40 9 - 40JM/16/2/5/32 10 - 45JM/16/2/5/20 11 - 45JM/20/2/6/34
5 10 4 4 9
11 10 9
11
2 1
3 1
3 6
8 6
Ref 1 4 2 3 5 6 9 7 8
Product Code 40JM/16/4/5/ 40JM/16/2/5/ 45JM/16/4/5/ 45JM/16/4/5/ 45JM/16/2/5/ 40JM/16/4/5/ 40JM/16/2/5/ 45JM/16/4/5/ 45JM/16/4/5/ 45JM/16/2/5/ 45JM/20/2/6/
m3/s at Pa (Static) 0 1.50 1.92 1.82 2.19 2.13 1.50 2.59 1.99 2.20 2.71 3.88 50 1.31 1.87 1.62 1.96 2.05 1.32 2.51 1.77 1.96 2.64 3.80 100 1.07 1.81 1.41 1.67 1.99 1.07 2.43 1.51 1.68 2.56 3.72 2.48 3.63 2.40 3.55 2.32 3.46 2.23 3.37 2.04 3.18 1.81 2.96 2.71 2.35 1.22 2.26 2.17 2.08 1.86 1.61 1.91 1.84 1.77 1.68 1.50 1.29 1.01 1.75 1.13 1.69 1.61 1.54 1.35 1.10 150 200 250 300 400 500 600
SUPERLITE - JM AEROFOIL
10 11
Electrical Data
Ref Product Code Speed rev/min Motor Product Number Pitch Angle () Rating (kW) Full Load Current (A) Starting Current (A) Wiring Diagram Ref Speed Controller Sound Level dBA
220-240V/50Hz/1 Ph 1 4 2 3 5 40JM/16/4/5/ 40JM/16/2/5/ 45JM/16/4/5/ 45JM/16/4/5/ 45JM/16/2/5/ 40JM/16/4/5/ 40JM/16/2/5/ 45JM/16/4/5/ 45JM/16/4/5/ 45JM/16/2/5/ 45JM/20/2/6/ 1420 2840 1420 1420 2840 1420 2730 1420 1420 2730 2850 BT9 CT9 BT9 CT5 CT9 BT9 80 BT9 CT5 80 100L DX411452 JL411203 JL461452 DX461466 JL461201 DX431452 EE431273 JL481452 DX481460 EE481272 EE481275 40 18-22 24-30 40 10-14 40 8-32 8-34 40 8-20 8-34 0.32 1 0.32 0.39 1 0.29 1.73 0.39 0.53 1.73 3.6 2.2 6.8 2.2 2.9 6.8 1 3.59 1.3 1.8 3.59 7.1 5 21 5 5.6 21 3 18.31 3.9 4.9 18.31 45.58 CD1705 CD1705 CD1705 CD1705 CD1705
Electronic ME1.3 N/A ME1.3 ME1.3 N/A Transformer CD2420 CD2416 CD2420 CD2420 CD2416 CD2416 MT3.1 N/A N/A MT3.2 N/A N/A
Transformer MT1.5 N/A MT1.5 MT1.5 N/A Inverter FWX1 FWX1 FWX1 FWX1 FWX1 FWX2 52 67 52 56 67 71 52 66 52 56 66
380-420V/50Hz/3 Ph 6 9 7 8 10 11
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. When fans are operating in excess of 50C they should be run at full speed only. For Short cased fans please omit the prefix from the product number and state S-type on enquiries/ orders. Product numbers shown are for Long cased fans. Wiring diagrams can be found on pages 17 - 18. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note may occur. FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation. B Type 1 diameter length - 7 to 10 dBA. C Type 1 diameter length - 12 to 15 dBA. For full acoustic details and resistance to airflow for type C see publications SP01.
FANS
SuperLite - JM Aerofoil
40JM - 45JM
Dimensions - 40 JM Aerofoil
Size
Frame BT4/5
Weight kg Fan 24 25 26 30
400
Dimensions - 45 JM Aerofoil
Size
Weight kg Fan 26 28 32 37 54
450
CT9 80 100L
SUPERLITE - JM AEROFOIL
8
FANS
SuperLite - JM Aerofoil
50JM
Performance Data
1 Phase
1 - 50JM/20/4/6/20 2 - 50JM/16/4/5/28 3 - 50JM/20/4/6/32 4 - 50JM/16/4/5/38
3 Phase
5 - 50JM/20/4/6/20 6 - 50JM/16/4/5/30 7 - 50JM/20/4/6/28 8 - 50JM/20/4/6/38 9 - 50JM/16/4/5/40 10 - 50JM/20/2/6/24 11 - 50JM/20/2/6/34
Ref 2 4 1 3 6 9 5 7 8
Product Code 50JM/16/4/5/ 50JM/16/4/5/ 50JM/20/4/6/ 50JM/20/4/6/ 50JM/16/4/5/ 50JM/16/4/5/ 50JM/20/4/6/ 50JM/20/4/6/ 50JM/20/4/6/ 50JM/20/2/6/ 50JM/20/2/6/
m3/s at Pa (Static) 0 2.42 2.93 1.84 2.61 2.54 3.02 1.84 2.37 2.88 4.32 5.56 50 2.19 2.66 1.68 2.42 2.30 2.75 1.68 2.19 2.69 4.23 5.46 100 1.95 2.36 1.52 2.20 2.04 2.43 1.52 1.98 2.45 4.16 5.37 1.30 1.75 2.16 4.08 5.27 4.00 5.16 3.91 5.05 3.83 4.96 3.65 4.73 3.43 4.49 3.20 4.23 1.42 150 1.66 1.99 1.30 1.94 1.75 1.62 200 250 300 400 500 600
SUPERLITE - JM AEROFOIL
10 11
Electrical Data
Ref Product Code Speed rev/min Motor Product Number Pitch Angle () Rating (kW) Full Load Current (A) Starting Current (A) Wiring Diagram Ref Speed Controller Sound Level dBA
220-240V/50Hz/1 Ph 2 4 1 3 50JM/16/4/5/ 50JM/16/4/5/ 50JM/20/4/6/ 50JM/20/4/6/ 1420 1420 1420 1420 CT5 CT9 BT9 CT5 DX511464 JL511460 DX511455 DX511466 24-28 32-38 16-20 32 0.52 0.68 0.32 0.52 3.9 4.8 2.2 3.9 7.8 11 5 7.8 CD1705 CD1705 CD1705 CD1705
Electronic ME1.6 ME1.6 ME1.3 ME1.6 Transformer 0.54 0.9 0.39 0.54 0.9 4.6 6.05 1.8 1.92 1.3 1.8 1.92 8.88 11.6 4.9 9.78 3.9 4.8 9.78 61.27 76.65 CD2420 CD2416 CD2420 CD2420 CD2416 CD2416 CD2417 MT3.2 N/A N/A MT3.2 N/A N/A N/A
Transformer MT1.5 MT1.5 MT1.5 MT1.5 Inverter FWX1 FWX1 FWX1 FWX1 FWX1 FWX4 FWX5 57 60 53 56 59 72 75 57 59 53 56
380-420V/50Hz/3 Ph 6 9 5 7 8 10 11 50JM/16/4/5/ 50JM/16/4/5/ 50JM/20/4/6/ 50JM/20/4/6/ 50JM/20/4/6/ 50JM/20/2/6/ 50JM/20/2/6/ 1420 1385 1420 1420 1385 2850 2865 CT5 80 BT9 CT5 80 100L 112M DX531460 EE531474 JL531456 DX531462 EE531478 EE531273 EE531274 30 8-40 8-20 28 8-40 8-28 8-34
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. When fans are operating in excess of 50C they should be run at full speed only. For Short cased fans please omit the prefix from the product number and state S-type on enquiries/ orders. Product numbers shown are for Long cased fans. Wiring diagrams can be found on pages 17 - 18. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation. B Type 1 diameter length - 7 to 10 dBA. C Type 1 diameter length - 12 to 15 dBA. For full acoustic details and resistance to airflow for type C see publications SP01.
FANS
SuperLite - JM Aerofoil
50JM
Dimensions - 50 JM Aerofoil
Size
Weight kg Fan 27 28 30 34 39 59 77
500
SUPERLITE - JM AEROFOIL
10
FANS
SuperLite - JM Aerofoil
56JM - 63JM
Performance Data
1 Phase
1 - 63JM/20/6/6/22 2 - 63JM/20/6/6/30 3 - 56JM/16/4/5/20 4 - 63JM/20/4/6/16 5 - 56JM/20/4/6/28 6 - 56JM/16/4/5/32
3 Phase
7 - 63JM/20/6/6/30 8 - 56JM/16/4/5/24 9 - 56JM/16/4/5/28 10 - 56JM/20/4/6/32 11 - 63JM/20/4/6/20 12 - 63JM/20/4/6/32 13 - 56JM/20/2/6/24
Ref 3 6 5 1 2 4 8 9 10 13 7
Product Code 56JM/16/4/5/ 56JM/16/4/5/ 56JM/20/4/6/... 63JM/20/6/6/... 63JM/20/6/6/... 63JM/20/4/6/ 56JM/16/4/5/ 56JM/16/4/5/ 56JM/20/4/6/ 56JM/20/2/6/ 63JM/20/6/6/ 63JM/20/4/6/ 63JM/20/4/6/
m3/s at Pa (Static) 0 2.74 3.76 3.47 2.57 3.25 3.12 3.09 3.44 3.80 6.33 3.24 3.77 5.40 50 2.50 3.46 3.25 2.23 2.85 2.98 2.83 3.16 3.57 6.25 2.86 3.57 5.12 100 2.24 3.15 3.01 1.78 2.32 2.80 2.56 2.88 3.31 6.16 2.33 3.37 4.87 3.14 4.56 2.89 4.23 2.55 3.83 2.58 2.27 2.55 3.03 6.05 2.30 1.85 2.12 2.70 5.98 5.85 5.77 5.53 5.30 5.03 1.95 1.38 150 1.93 2.81 2.74 200 1.46 2.38 2.43 250 300 400 500 600
SUPERLITE - JM AEROFOIL
11 12
Electrical Data
Ref Product Code Speed rev/min Motor Product Number Pitch Angle () Rating (kW) Full Load Current (A) Starting Current (A) Wiring Diagram Ref Speed Controller Sound Level dBA
220-240V/50Hz/1 Ph 3 6 5 1 2 4 56JM/16/4/5/ 56JM/16/4/5/ 56JM/20/4/6/... 63JM/20/6/6/... 63JM/20/6/6/... 63JM/20/4/6/ 1420 1420 1420 900 900 1420 CT5 CT9 CT9 CT5 CT9 CT9 JL571453 DX571456 DX571459 JL641651 JL641652 DX641453 18-20 32 28 16-22 26-30 16 0.52 0.97 0.97 0.29 0.53 0.97 3.9 6.7 6.7 2.3 0.38 6.7 7.8 13.5 13.5 4.1 6.8 13.5 CD1705 CD1705 CD1705 CD1705 CD1705 CD1705
Electronic ME1.6 ME1.6 ME1.6 ME1.3 ME1.6 ME1.6 Transformer 0.54 0.9 1.32 6.05 0.5 1.32 2.64 1.8 1.92 2.84 11.6 1.5 2.84 5.49 4.9 9.78 15.6 76.56 4.5 15.6 30.62 CD2417 CD2416 CD2416 CD2417 CD2420 CD2416 CD2416 MT3.2 N/A N/A N/A MT3.2 N/A N/A
Transformer MT1.5 MT1.8 MT1.8 MT1.5 MT1.8 MT1.8 Inverter FWX1 FWX1 FWX2 FWX5 FWX1 FWX2 FWX3 57 60 62 73 50 60 64 57 58 58 49 52 61
380-420V/50Hz/3 Ph 8 9 10 13 7 11 12 56JM/16/4/5/ 56JM/16/4/5/ 56JM/20/4/6/ 56JM/20/2/6/ 63JM/20/6/6/ 63JM/20/4/6/ 63JM/20/4/6/ 1420 1385 1425 2865 900 1425 1405 CT5 80 90S 112M CT9 90S 100L JL591452 EE591473 EE591478 EE591271 JL661652 EE661473 EE661474 16-24 8-30 8-36 8-22 26-30 8-22 8-36
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. When fans are operating in excess of 50C they should be run at full speed only. For Short cased fans please omit the prefix from the product number and state S-type on enquiries/ orders. Product numbers shown are for Long cased fans. Wiring diagrams can be found on pages 17 - 18. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note may occur. FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation. B Type 1 diameter length - 7 to 10 dBA. C Type 1 diameter length - 12 to 15 dBA. For full acoustic details and resistance to airflow for type C see publications SP01.
11
FANS
SuperLite - JM Aerofoil
56JM - 63JM
Dimensions - 56 JM Aerofoil
Size
Frame CT5/9
Weight kg Fan 38 41 56 80
560
80 90L 112M
Dimensions - 63 JM Aerofoil
Size
Weight kg Fan 48 52 73 75 83
Size
Frame 132
630
160 180
630
SUPERLITE - JM AEROFOIL
12
FANS
SuperLite - JM Aerofoil
71JM - 80JM
Performance Data
71 JM
1 - 71JM/20/6/6/18 2 - 71JM/20/6/6/36 3 - 71JM/20/4/6/24 4 - 71JM/20/4/6/36
80 JM
5 - 80JM/20/6/6/26 6 - 80JM/20/6/6/36 7 - 80JM/25/4/9/22 8 - 80JM/25/4/9/28
3 4 4
Ref 1 2 3 4 5 6 7 8
Product Code 71JM/20/6/6/ 71JM/20/6/6/ 71JM/20/4/6/ 71JM/20/4/6/ 80JM/20/6/6/ 80JM/20/6/6/ 80JM/25/4/9/ 80JM/25/4/9/
m3/s at Pa (Static) 0 3.29 5.47 6.49 8.75 6.48 7.92 8.42 10.07 50 2.97 4.89 6.24 8.41 5.83 7.32 8.16 9.84 100 2.54 4.23 6.00 8.03 5.20 6.55 7.91 9.54 5.76 7.66 4.48 5.49 7.62 9.24 7.38 8.93 7.05 8.61 6.75 8.21 5.98 7.35 5.51 7.24 5.25 6.81 4.92 6.34 150 200 250 300 400
SUPERLITE - JM AEROFOIL
Electrical Data
380-420V/50Hz/3 Ph Ref Product Code 71JM/20/6/6/ 71JM/20/6/6/ 71JM/20/4/6/ 71JM/20/4/6/ 80JM/20/6/6/ 80JM/20/6/6/ 80JM/25/4/9/ 80JM/25/4/9/ Speed rev/min 900 905 1440 1410 905 925 1410 1455 Motor Product Number JL741652 EE741673 EE741471 EE741474 EE831671 EE831672 EE831475 EE831478 Pitch Angle () 16-18 8-30 8-30 8-36 8-24 8-36 8-22 8-28 Motor Rating (kW) 0.5 1.32 3.6 4.4 1.32 2.64 4.8 6.6 Full Load Current (at 400V) (A) 1.5 3.13 7.29 8.7 3.13 6.18 9.69 12.5 Starting Current (at 400V) (A) 4.5 13.07 40.11 57.3 13.07 26.5 49.53 76.65 Wiring Diagram Ref CD2420 CD2416 CD2416 CD2417 CD2416 CD2417 CD2417 CD2417 Speed Controller Transformer MT3.2 N/A N/A N/A N/A N/A N/A N/A Inverter FWX1 FWX2 FWX4 FWX5 FWX2 FWX4 FWX5 FWX5 Sound Level dBA 53 57 65 68 59 63 70 71
1 2 3 4 5 6 7 8
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. When fans are operating in excess of 50C they should be run at full speed only. For Short cased fans please omit the prefix from the product number and state S-type on enquiries/orders. Product numbers shown are for Long cased fans. Wiring diagrams can be found on pages 17 - 18. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note may occur. FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation. B Type 1 diameter length - 7 to 10 dBA. C Type 1 diameter length - 12 to 15 dBA. For full acoustic details and resistance to airflow for type C see publications SP01.
13
FANS
SuperLite - JM Aerofoil
71JM - 80JM
Dimensions - 71 JM Aerofoil
Size
710
Dimensions - 80 JM Aerofoil
Size
J 10 10 10 12 12
800
SUPERLITE - JM AEROFOIL
14
FANS
SuperLite - JM Aerofoil
90JM - 100JM
Performance Data
90 JM
1 - 90JM/25/8/9/32 3 - 90JM/25/6/9/24 5 - 90JM/25/4/9/32 2 - 90JM/25/6/6/32 4 - 90JM/25/4/9/24
100 JM
6 - 100JM/25/8/9/22 8 - 100JM/25/4/6/22 10 - 100JM/25/4/9/28 7 - 100JM/25/6/6/18 9 - 100JM/25/4/9/22
Ref 1 2 3 4 5 6 7 8 9 10
Product Code 90JM/25/8/9/ 90JM/25/6/6/ 90JM/25/6/9/ 90JM/25/4/9/ 90JM/25/4/9/ 100JM/25/8/9/ 100JM/25/6/6/ 100JM/25/4/6/ 100JM/25/4/9/ 100JM/25/4/9/
m3/s at Pa (Static) 0 7.50 9.83 8.58 12.40 15.53 8.36 9.52 16.48 17.70 20.98 50 6.74 9.06 8.12 12.11 15.22 7.39 8.79 15.87 17.22 20.53 100 5.91 8.20 7.63 11.84 14.86 6.35 7.93 15.35 16.79 20.07 6.95 14.80 16.31 19.59 5.80 14.20 15.88 19.10 13.59 15.40 18.61 13.02 14.94 18.10 11.66 13.88 17.00 9.98 12.72 15.76 7.20 7.14 11.53 14.46 6.55 11.24 14.09 5.78 10.95 13.71 10.64 13.33 9.93 12.46 9.15 11.51 150 200 250 300 400 500
SUPERLITE - JM AEROFOIL
Electrical Data
380-420V/50Hz/3 Ph Ref Product Code 90JM/25/8/9/ 90JM/25/6/6/ 90JM/25/6/9/ 90JM/25/4/9/ 90JM/25/4/9/ 100JM/25/8/9/ 100JM/25/6/6/ 100JM/25/4/6/ 100JM/25/4/9/ 100JM/25/4/9/ Speed rev/min 685 925 925 1455 1440 685 925 1455 1440 1440 Motor Product Number EE931872 EE933672 EE931672 EE931473 EE931476 EE131872 EE133672 EE133472 EE131479 EE131475 Pitch Angle () 8-36 8-32 8-24 8-24 8-32 8-26 8-22 8-22 8-22 8-28 Motor Rating (kW) 1.8 2.64 2.64 9 13.2 1.8 2.64 9 13.2 18 Full Load Current (at 400V) (A) 4.51 6.18 6.18 17.1 25.3 4.51 6.18 17.1 25.3 34.8 Starting Current (at 400V) (A) 19.22 26.5 26.5 102 136 19.22 26.5 102 136 178 Wiring Diagram Ref CD2417 CD2417 CD2417 CD2417 CD2417 CD2417 CD2417 CD2417 CD2417 CD2417 Speed Controller Transformer N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Inverter FWX3 FWX4 FWX4 FWX6 FWD8 FWX3 FWX4 FWD7 FWD8 FWD9 Sound Level dBA 57 66 63 77 76 62 69 79 85 81
1 2 3 4 5 6 7 8 9 10
112M 112M 112M 132M 160M 112M 112M 132M 160M 160L
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. When fans are operating in excess of 50C they should be run at full speed only. For Short cased fans please omit the prefix from the product number and state S-type on enquiries/ orders. Product numbers shown are for Long cased fans. Wiring diagrams can be found on pages 17 - 18. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note may occur. FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation. B Type 1 diameter length - 7 to 10 dBA. C Type 1 diameter length - 12 to 15 dBA. For full acoustic details and resistance to airflow for type C see publications SP01.
15
FANS
SuperLite - JM Aerofoil
90JM - 100JM
Dimensions - 90 JM Aerofoil
Size
Frame 112M
J 10 12 12
900
132S/M 160M
Size
Frame 112M
J 10 12 12 12
1000
SUPERLITE - JM AEROFOIL
16
FANS
SuperLite - JM Aerofoil
Wiring Diagrams
CD2417 Fan
U1 V1 W1 V2 U2 W2
Normal Delta
(L1)
(L2)
W
(L3)
S S = Thermistors K K = Thermostat
H H = Heaters
CD2416 Fan
Overheat Protection
Star
U1 V1 W1 U2 W2 V2
S S = Thermistors K K = Thermostat
SUPERLITE - JM AEROFOIL
(L1)
(L2)
W
(L3)
CD2420 Fan
U1 V1 W1 V2 U2 W2
U
High Speed
(L1)
(L2)
W
(L3)
U1 V1 W1 V2 U2 W2
U V W
(L3)
Low Speed
(L1)
(L2)
17
FANS
SuperLite - JM Aerofoil
Wiring Diagrams
CD1705 Fan
Note: When using a 1 fan with a speed controller remove link shown by dotted line Fan terminal block E K K UZ U Z P Connect thermal cut out terminals 'K' to a resettable device
UZ
1 supply E L N
SUPERLITE - JM AEROFOIL
18
19
Notes
FANS
315mm to 1000mm diameter Volume flows up to 21 m3/s Static pressures up to 600 Pa Motor protection IP55 I nverter controllable for ambient temperatures
SuperLite - JM HT
D esigned for emergency ventilation of hot fire smoke applications 3 00C or 400C for two hours operation, CE marked to EN12101-3 2002 All casings are hot dipped galvanised
High Temperature
FAN PERFORMANCE All fans are tested to the latest internationally recognised standard IS05801 Part 1, installation category D for aerodynamic performance and BS848 Part 2 (1985) for acoustic performance. Coupled with a wide range of diameters, the adjustable pitch Aerofoil impeller gives the exact performance required, with a non overloading fan characteristic. IMPELLERS A unique high efficiency aerofoil section blade with a purposely smoothed hub and clamp plate for adjustable pitch angle availability. The Flkt Woods impellers are all high pressure die cast to offer thin aerofoil sections for low generation of noise. Every cast aluminium component is X-ray examined using Real Time Radiography inspection prior to assembly. The maximum pitch angles shown allow for speed control by frequency inverter. MOTORS Flkt Woods H.T. Series fans utilise a totally enclosed squirrel cage motor. The grades of motor insulation have been selected to meet the specific requirements for each of the H.T. Categories. These motors are suitable for inverter speed control down to 20% of full speed and where within scope incorporate IE2 compliant motors. ELECTRICAL SUPPLY 400V / 50Hz / 3 Ph TEMPERATURE RANGE Fans are tested in compliance with high temperature test standard directive 89/106/EEC to EN 12101-3, and are fully CE marked accordingly. Flkt Woods H.T. Series fan motors are sized to run the fans continuously at normal ambient temperatures (-40C to 50C), as well as operating at their emergency high temperature category.
(All motors are not suitable for starting at temperatures lower than -20C). Most Standard 3 Ph fans can be offered for a one off emergency operation at 200C for 2 hours. Note: During emergency use the inverter should be overridden and the fan run at full speed. CASINGS JM HT Aerofoil fans are available in long cased form, complete with an externally mounted pre-wired electrical terminal box. Casings are spun from sheet steel with integral pre-drilled and radiused inlet flanges. The galvanised finish gives a high resistance to corrosion and is ideal for external as well as internal use. ACCESSORIES Silencers, mounting feet, spring type vibration isolators, matching flanges, flexible connectors, air operated non return dampers, guards, bell mouth inlets. For a full range please see pages 43 - 47.
FANS
SuperLite - JM Aerofoil
HT 300/2
Performance Data
4 Pole
1 - 31JMHT/16/4/5/40 3 - 40JMHT/16/4/5/40 5 - 50JMHT/20/4/6/40 2 - 35JMHT/16/4/5/40 4 - 45JMHT/20/4/6/40
2 Pole
6 - 31JMHT/16/2/5/40 8 - 40JMHT/16/2/5/32 10 - 50JMHT/20/2/6/36 7 - 35JMHT/16/2/5/36 9 - 45JMHT/20/2/6/34
Ref 6 1 2 7 8 3 4 9 5 10
Product Code 31JMHT/16/2/5/... 31JMHT/16/4/5/... 35JMHT/16/4/5/... 35JMHT/16/2/5/... 40JMHT/16/2/5/... 40JMHT/16/4/5/... 45JMHT/20/4/6/... 45JMHT/20/2/6/... 50JMHT/20/4/6/... 50JMHT/20/2/6/...
m3/s at Pa (Static) 0 1.35 0.67 1.02 2.04 2.59 1.51 2.07 3.88 2.97 5.76 50 1.29 0.54 0.85 1.96 2.50 1.29 1.88 3.79 2.75 5.64 1.87 2.42 1.01 1.63 3.69 2.47 5.52 3.60 2.09 5.43 5.31 5.18 5.07 4.81 4.51 4.20 3.52 3.43 3.32 3.10 2.83 2.53 1.79 2.33 1.70 2.23 1.60 2.12 1.48 2.01 1.77 1.46 100 1.23 150 1.15 200 1.07 250 0.97 300 0.83 400 500 600
Electrical Data
380-420V/50Hz/3 Ph Ref Product Code 31JMHT/16/2/5/... 31JMHT/16/4/5/... 35JMHT/16/4/5/... 35JMHT/16/2/5/... 40JMHT/16/2/5/... 40JMHT/16/4/5/... 45JMHT/20/4/6/... 45JMHT/20/2/6/... 50JMHT/20/4/6/... 50JMHT/20/2/6/... Speed rev/min 2735 1420 1420 2735 2730 1420 1420 2850 1385 2865 Motor Product Number EE349282 EF349433 EF389430 EE389280 EE439280 EF439430 EF489430 EE489280 EE539482 EE539280 Pitch Angle () 8-40 40 40 8-36 8-32 40 40 8-40 8-40 8-34 Motor Rating (kW) 0.9 0.66 0.66 1.32 1.73 0.66 0.66 4.6 0.9 6.05 Full Load Current (at 400V) (A) 1.95 1.6 1.6 2.79 3.59 1.60 1.60 8.88 1.92 11.6 Starting Current (at 400V) (A) 9.78 8.2 8.2 14.62 18.31 8.2 8.2 61.27 9.78 76.65 Wiring Diagram Ref CD2416 CD1344 CD1344 CD2416 CD2416 CD1344 CD1344 CD2417 CD2416 CD2417 Speed Controller Inverter FWX1 FWX2 FWX2 FWX2 FWX2 FWX2 FWX4 FWX4 FWX1 FWX6 Sound Level dBA 64 47 52 68 69 55 58 77 61 78
6 1 2 7 8 3 4 9 5 10
80 80 80 80 80 80 80 100L 80 112M
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. For Short cased fans please omit the prefix from the product number and state S-type on enquiries/orders. Product numbers shown are for Long cased fans. Wiring diagrams can be found on pages 25 - 26. Performance shown at emergency operating temperatures. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note may occur. FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation.
21
FANS
SuperLite - JM Aerofoil
HT 300/2
Product Code 31JMHT/16/2/5/.. 31JMHT/16/4/5/.. 35JMHT/16/4/5/.. 35JMHT/16/2/5/.. 40JMHT/16/2/5/ 40JMHT/16/4/5/.. 45JMHT/20/4/6/.. 45JMHT/20/2/6/.. 50JMHT/20/4/6/.. 50JMHT/20/2/6/..
A 395 395 435 435 480 480 530 530 594 594
B 315 315 355 355 400 400 450 450 500 500
C 375 375 375 375 375 375 375 520 375 520
D 238 238 256 256 279 279 306 306 500 500
E 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.0
G 175 175 200 200 225 225 225 225 290 290
H 355 355 395 395 450 450 500 500 560 560
J 10 10 10 10 10 10 10 10 10 10
K 290 290 290 290 290 290 290 434 290 434
L 265 265 305 305 350 350 400 400 450 450
M 315 315 355 355 400 400 450 450 500 500
P 200 200 225 225 250 250 280 280 315 315
S 8 8 8 8 8 8 8 8 12 12
T 10 10 10 10 12 12 12 12 12 12
FANS
SuperLite - JM Aerofoil
HT 300/2
Performance Data
4 Pole
1 - 56JMHT/20/4/6/40 3 - 71JMHT/20/4/6/30 5 - 90JMHT/25/4/9/30 2 - 63JMHT/20/4/6/36 4 - 80JMHT/25/4/9/36 6 - 100JMHT/25/4/9/28
2 Pole
7 - 56JMHT/20/2/6/24 8 - 63JMHT/25/2/3/24
Ref 1 7 8 2 3 4 5 6
Product Code 56JMHT/20/4/6/... 56JMHT/20/2/6/... 63JMHT/25/2/3/... 63JMHT/20/4/6/... 71JMHT/20/4/6/... 80JMHT/25/4/9/... 90JMHT/25/4/9/... 100JMHT/25/4/9/...
m3/s at Pa (Static) 0 4.33 6.37 7.79 5.94 7.66 12.36 15.60 21.01 50 4.05 6.23 7.57 5.58 7.34 11.91 15.20 20.50 100 3.73 6.12 7.38 5.23 7.01 11.46 14.77 19.95 150 3.36 6.03 7.19 4.83 6.68 10.99 14.35 19.49 5.91 6.96 4.43 6.32 10.54 13.97 18.92 5.81 6.76 3.97 5.94 10.08 13.53 18.34 5.48 9.59 13.06 17.76 8.41 12.09 16.49 10.89 15.03 13.36 5.67 6.53 5.43 6.10 5.15 5.64 4.87 5.15 4.52 4.62 4.15 4 200 250 300 400 500 600 700 800
Electrical Data
380-420V/50Hz/3 Ph Ref Product Code 56JM/20/4/6/... 56JM/20/2/6/... 63JM/25/2/3/... 63JM/20/4/6/... 71JM/20/4/6/... 80JM/25/4/9/... 90JM/25/4/9/... 100JM/25/4/9/... Speed rev/min 1425 2865 2885 1405 1385 1445 1440 1440 Motor Product Number EE599480 EE599280 EE664281 EE669482 EE749481 EE839483 EE939481 EE139485 Pitch Angle () 8-40 8-22 8-24 8-36 8-30 8-36 8-32 8-28 Motor Rating (kW) 1.8 6.05 6.6 2.64 3.6 8.63 12.65 18 Full Load Current (at 400V) (A) 3.76 11.6 12.70 5.49 7.29 16.40 24 34.8 Starting Current (at 400V) (A) 20.54 76.65 72.08 30.62 40.11 101.52 163.2 171 Wiring Diagram Ref CD2416 CD2417 CD2417 CD2416 CD2416 CD2417 CD2417 CD2417 Speed Controller Inverter FWX2 FWX5 FWX5 FWX4 FWX4 FWD7 FWD8 FWD9 Sound Level dBA 65 76 77 67 69 77 89 84
1 7 8 2 3 4 5 6
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. For Short cased fans please omit the prefix from the product number and state S-type on enquiries/orders. Product numbers shown are for Long cased fans. Wiring diagrams can be found on pages 25 - 26. Performance shown at emergency operating temperatures. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note may occur. FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation.
23
FANS
SuperLite JM Aerofoil
HT 300/2
Product Code 56JMHT/20/4/6/... 56JMHT/20/2/6/... 63JMHT/25/2/3/ 63JMHT/20/4/6/... 71JMHT/20/4/6/ 80JMHT/25/4/9/... 90JMHT/25/4/9/ 100JMHT/25/4/9/
E 3 3 3 3 4 5 5 6
J 10 10 10 10 12 12 12 12
S 12 12 12 12 16 16 16 16
T 12 12 12 12 12 12 15 15
FANS
SuperLite - JM Aerofoil
High Temperature
Wiring Diagrams
CD1344 Fan
CD2416 Fan
Overheat Protection
Star
U1 V1 W1 U2 W2 V2
S S = Thermistors K K = Thermostat
(L1)
(L2)
W
(L3)
25
FANS
SuperLite - JM Aerofoil
High Temperature
Wiring Diagrams
CD2417 Fan
U1 V1 W1 V2 U2 W2
Normal Delta
S S = Thermistors K K = Thermostat
H H = Heaters
(L1)
(L2)
W
(L3)
FANS
SuperLite - JM Bifurcated
Notes
SUPERLITE - JM BIFURCATED
27
FANS
400mm - 1000mm diameter Volume flow up to 12 m3/s Static pressures up to 650 Pa
SuperLite - JM Bifurcated
A ll aluminium cast components are x-ray examined All casings are hot dipped galvanised Multi-stage is available for higher pressures Inverter speed controllable
Suitable for temperatures up to 200C Motor protection IP55 Overheat protection fitted as standard
SIZES 40JM.Bif - 400mm, 50JM.Bif - 500mm, 63JM.Bif - 630mm, 80JM.Bif - 800mm 800 and 1000mm JM.Bif available, please contact Flkt Woods for details Larger sizes are available, please enquire. FAN PERFORMANCE Coupled with the above fan diameters the fully adjustable pitch Aerofoil impeller gives the exact performance required with a non overloading fan characteristic. Higher pressures are obtained by multi-staging the Bifurcated Aerofoil fan. IMPELLERS A unique high efficiency aerofoil section blade with a purposely smoothed hub and clamp plate for adjustable pitch angle availability. The Flkt Woods impellers are all high pressure die cast to offer thin aerofoil sections for low generation of noise. Every component is X-rayed using Real Time Radiography inspection prior to assembly. The maximum pitch angles shown allow for speed control by frequency inverter. MOTORS All motors are totally enclosed fan cooled class F insulation with protection to IP55 and are IE2 compliant. All motors are supplied with sealed for life bearings or extended lubricators. These motors are suitable for inverter speed control down to 20% of full speed. ELECTRICAL SUPPLY 380 - 420V / 50Hz / 3 Ph TEMPERATURE RANGE Up to 200C continuous operation CASINGS Bifurcated fans are available long case only. Long casing covers impeller and motor and has duct mounted terminal box. The hot dipped galvanised casing gives a high resistance to corrosion. ACCESSORIES Silencers, mounting feet, vibration isolators, matching flanges, flexible connectors, guards, bell mouth inlets. For a full range please see pages 43 - 47.
SUPERLITE - JM BIFURCATED
28
FANS
SuperLite - JM Bifurcated
Performance Data
4 Pole
1 - 40JM Bif/20/4/6/40 2 - 50JM Bif/20/4/6/32 3 - 40JM Bif/20/2/6/32 4 - 63JM Bif/20/4/6/30 5 - 50JM Bif/20/2/6/24 6 - 80JM Bif/20/4/6/22 7 - 100JM Bif/25/4/9/14 8 - 100JM Bif/25/4/9/30
14
15
16
17
18
Ref
Product Code 40JM.Bif/20/4/6/... 40JM.Bif/20/2/6/... 50JM.Bif/20/4/6/... 50JM.Bif/20/2/6/... 63JM.Bif/20/4/6/... 80JM.Bif/20/4/6/... 100JM.Bif/25/4/9/... 100JM.Bif/25/4/9/...
m3/s at Pa (Static) 0 1.23 2.21 2.44 4.22 4.86 8.61 12.10 17.38 100 0.97 2.10 2.07 3.98 4.39 7.92 11.55 16.79 1.98 1.68 3.86 3.88 7.19 10.81 15.95 3.68 3.30 6.39 9.89 14.86 5.22 8.65 13.46 6.76 3.54 3.35 3.18 2.79 2.56 1.87 1.74 1.60 1.47 200 300 400 500 600 800 900
1 3 2 5 4 6
SUPERLITE - JM BIFURCATED
7 8
Electrical Data
380-420V/50Hz/3 Ph Ref Product Code Speed rev/min Motor Product Number JN245007 JN245009 JN275012 JN275011 JN305003 JN839013 JN139420 JN139421 Pitch Angle () 32 32 32 20 32 22 14 30 Motor Rating (kW) 0.55 2.2 0.75 4 2.2 4 7.5 15 Full Load Current (at 400V) (A) 1.36 4.58 1.69 7.72 4.43 8.11 14.1 28.7 Starting Current (at 400V) (A) 8.7 30.2 9.97 50.2 32.8 49.5 101.5 177.9 Wiring Diagram Ref CD2416 CD2416 CD2416 CD2416 CD1344 CD2416 CD1343 CD2417 Speed Controller Inverter FWX1 FWX3 FWX1 FWX4 FWX3 FWX4 FWX6 N/A 62 75 62 80 69 75 85 87 Sound Level dBA
1 3 2 5 4 6 7 8
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. If the temperature of airflow within a bifurcated fan system is above ambient, FWL recommend that the fan is allowed to overrun so that any excessive heat is removed from the system. Failure to do this could mean that excessive heat can transfer via the shaft/casing to the motor tunnel that can cause degradation of the grease and lead to premature failure. Wiring diagrams can be found on pages 31 - 32. Rubber anti-vibration mounts can be used, but only if the mounts are below the fan and the temperature at the anti-vibration mount is less that 80C. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note may occur. FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation.
29
FANS
SuperLite - JM Bifurcated
Dimensions
40JM.Bif - 50JM.Bif
63JM.Bif - 100JM.Bif
Product Code 40JM.Bif/20/4/6/... 40JM.Bif/20/2/6/... 50JM.Bif/20/4/6/... 50JM.Bif/20/2/6/... 63JM.Bif/20/4/6/... 80JM.Bif/20/4/6/... 100JM.Bif/25/4/9/... 100JM.Bif/25/4/9/...
Motor Range 90S 90L 90S 112M 100L 112M 132L 160L
E 3 3 3 3 3 3 5 5
N 10 10 10 10 10 10 12 12
Q 3 3 3 3 3 5 6 6
S 8 8 12 12 12 16 16 16
T 12 12 12 12 12 12 15 15
Max. Fan Weight (kg) 61.7 56.7 59.9 80.5 74.1 97.2 258 356
SUPERLITE - JM BIFURCATED
30
FANS
SuperLite - JM Bifurcated
Wiring Diagrams
CD1343 Fan
CD1344 Fan
SUPERLITE - JM BIFURCATED
31
FANS
SuperLite - JM Bifurcated
Wiring Diagrams
2416 Fan
CD2417 Fan
(L1)
(L2)
W
(L3)
S S = Thermistors K K = Thermostat
H H = Heaters
SUPERLITE - JM BIFURCATED
32
U1 V1 W1 V2 U2 W2
Normal Delta
FANS
SuperLite - Series 33
Notes
Bifurcated Fans
FANS
152mm - 305mm diameter Volume flow up to 0.95 m3/s Static pressures up to 380 Pa Suitable for temperatures up to 200C
SuperLite - Series 33
Motor protection IP55 S eries 33 is cost effective solution to Bifurcated applications
Bifurcated Fans
SIZES 15JM.Bif -152mm, 25JM.Bif - 254mm, 30JM.Bif - 305mm FAN PERFORMANCE Ideally suited for exhausting or recirculating fumes, gases and hot air up to temperatures of 200C. Motor must have access to ambient air. All fans have non overloading characteristics. IMPELLERS Cast in aluminium silicon alloy and has a fixed pitch aerofoil section blade. This ensures strength, reliability and performance at high temperature. MOTORS All motors are totally enclosed fan cooled, class F insulation with motor protection to IP55. All motors are supplied with sealed for life bearings. ELECTRICAL SUPPLY 220 - 240V / 50Hz / 1Ph 380 - 420V / 50Hz / 3Ph TEMPERATURE RANGE Up to 200C. For higher temperatures please enquire. CASINGS All casings are hot dip galvanised for long life and a high resistance to corrosion. A seal is provided on the motor shaft. ACCESSORIES Silencers, mounting feet/plates, vibration isolators, matching flanges, high temperature flexible connectors. For a full range please see pages 43 - 47.
FANS
SuperLite - Series 33
Bifurcated Fans
Performance Data
Product Code
220-240V/50Hz/1 Ph 15JM.Bif.33 25JM.Bif.33 30JM.Bif.33 0.11 0.29 0.49 0.07 0.25 0.44 0.06 0.19 0.38 0.31 0.04
380-420V/50Hz/3 Ph 25JM.Bif.33 25JM.Bif.33 30JM.Bif.33 30JM.Bif.33 0.29 0.57 0.49 0.98 0.25 0.54 0.44 0.96 0.19 0.52 0.38 0.93 0.51 0.31 0.91 0.88 0.83 0.77 0.7 0.44 0.49 0.46 0.38
Electrical Data
Product Code Speed rev/min Motor Product Number Rating (kW) Full Load Current (at 230V) (A) Starting Current (at 230V) (A) Wiring Diagram Ref Speed Controller Inverter Sound Level dBA
220-240V/50Hz/1 Ph 15JM.Bif.33 25JM.Bif.33 30JM.Bif.33 2900 1400 1400 63 63 63 DB125603 DB215607 DB025607 0.18 0.12 0.12 1.4 1.1 1 4.2 3 3 CD2426 CD2426 CD2426 N/A N/A N/A 40 55 46
380-420V/50Hz/3 Ph 25JM.Bif.33 25JM.Bif.33 30JM.Bif.33 30JM.Bif.33 1400 2900 1400 2900 63 71 63 71 DB215608 DB215609 DB025608 DB025609 0.18 0.37 0.18 0.37 0.6 0.9 0.6 0.9 2.3 4.9 2.3 4.9 CD1344 CD1344 CD1344 CD1344 FWX1 FWX1 FWX1 FWX1 40 55 46 63
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. Performance shown at emergency operating temperatures. If the temperature of airflow within a bifurcated fan system is above ambient, FWL recommend that the fan is allowed to overrun so that any excessive heat is removed from the system. Failure to do this could mean that excessive heat can transfer via the shaft/casing to the motor tunnel that can cause degradation of the grease and lead to premature failure. Wiring diagrams can be found on page 36. Rubber anti-vibration mounts can be used, but only if the mounts are below the fan and the temperature at the anti-vibration mount is less that 80C. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note may occur. FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation.
35
FANS
SuperLite - Series 33
Bifurcated Fans
Mounting Feet
15JM.33 - DA016504 25JM.33 - DA404431 30JM.33 - DA049381 For dimensions see L and M below.
Motor Range 63 63 71 63 71
E 1.2 2 2 2 2
S 4 8 8 8 8
T 8 10 10 10 10
Weight (kg) 15 21 24 26 28
Wiring Diagrams
CD2426 Fan
CD1344 Fan
FANS
Notes
SuperLite - MaXfan
SUPERLITE - MAXFAN
37
FANS
400mm - 630mm diameter Volume flow up to 7.2 m3/s Static pressures up to 1000 Pa High energy efficiency All casings are hot dipped galvanised
SuperLite - MaXfan
Low installed noise levels Motor protection IP55 Overheat protection fitted as standard Inverter controllable on 3 Ph Speed controllable on 1 Ph and 3 Ph
SIZES 400mm - 630mm MaXfan and 630mm MaXfan Plus FAN PERFORMANCE All fans are tested to the latest internationally recognised standard IS05801 1997, installation category D for aerodynamic performance and BS848 Part 2 (1985) for acoustic performance. IMPELLERS A unique high efficiency aerofoil section blade with a purposely smoothed hub and clamp plate for adjustable pitch angle availability. The Flkt Woods impellers are all high pressure die cast to offer thin aerofoil sections for low generation of noise. Every cast aluminium component is X-ray examined using Real Time Radiography prior to assembly. MOTORS All motors are totally enclosed air stream rated class F insulation. Constructed from aluminium as standard with special T slot or pad mounted fixings. Motors are suitable for speed control. Suitable for horizontal through to vertical shaft operation. Supplied IP55, with removable drain plugs. Sealed for life bearings lubricated with wide temperature range grease. Motors are fitted with thermostat overheat protection as standard. Three phase motors are suitable for inverter speed control down to 20% of full speed and where within scope incorporate IE2 compliant motors. ELECTRICAL SUPPLY 220 - 240V / 50Hz / 1 Ph 380 - 420V / 50Hz / 3 Ph TEMPERATURE RANGE -40C to 50C as standard (all motors are not suitable for starting at temperatures lower than -20C). Fans that include BT or CT motors can be continuously operated at temperatures up to 70C. When these fans are operating in excess of 50C they should be run at full speed only. Other fans can be operated up to 70C with appropriate deration of motors. CASINGS MaXfans are available fully cased, complete with an externally mounted pre-wired electrical terminal box. Casings are spun from sheet steel with integral pre-drilled and radiused inlet flanges. The galvanised finish gives a high resistance to corrosion and is ideal for external as well as internal use. ACCESSORIES Silencers, mounting feet, vibration isolators, matching flanges, flexible connectors, air operated non return dampers, guards, bell mouth inlets. For a full range please see pages 43 - 47.
SUPERLITE - MAXFAN
38
FANS
SuperLite - MaXfan
Performance Data
700 630mm 600
560mm 500mm
400
300
450mm 400mm
200
100
m3/s at Pa (Static) 100 1.53 1.76 3.26 3.58 3.73 150 1.41 1.64 3.15 3.47 3.61 200 1.27 1.50 3.04 3.35 3.49 250 1.09 1.34 2.92 3.22 3.35 2.79 3.07 3.20 2.64 2.88 3.03 2.46 2.65 2.83 2.13 2.36 2.61 2.33 1.99 1.57 1.13 300 350 400 450 500 550 600 650
Electrical Data
Product Code Speed rev/min Motor Product Number Motor Rating (kW) 0.64 0.78 1.94 1.94 1.94 220-240V/50Hz/1 Ph Full Load Current (at 230 V) (A) 4.4 5.8 13.4 13.4 13.4 Starting Current (at 230V) (A) 10 11.2 27 27 27 Wiring Diagram Ref CD1705 CD1705 CD1705 CD1705 CD1705 Speed Controller ME1.6 ME1.6 ME1.12 ME1.12 ME1.12 Sound Level dBA 67 65 75 75 78
SUPERLITE - MAXFAN
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. Wiring diagrams can be found on page 40. Rubber anti-vibration mounts can be used, but only if the mounts are below the fan and the temperature at the anti-vibration mount is less that 80C. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note may occur. FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation
39
FANS
SuperLite - MaXfan
Dimensions
N 10 10 10 10 10
S 8 8 12 12 12
T 12 12 12 12 12
Weight (kg) 38 43 57 61 71
Wiring Diagrams
CD1705
Fan
UZ
1 supply E L N
SUPERLITE - MAXFAN
40
FANS
Performance Data
m3/s at Pa (Static) Product Code 0 7.21 200 6.88 400 6.51 600 6.03 800 5.52 1000 4.82
63 MaXfan Plus
Electrical Data
Product Code
Speed rev/min
Motor
Product Number
380-420V/50Hz/3 Ph Full Load Current (at 400V) (A) 19.38 Starting Current (at 400V) (A) 99.06 Wiring Diagram Ref CD1343 Speed Controller FWDP7
63 MaXfan Plus
1440
112
EQ661495
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. Wiring diagrams can be found on page 42. Rubber anti-vibration mounts can be used, but only if the mounts are below the fan and the temperature at the anti-vibration mount is less that 80C. Bold text denotes next day delivery available if ordered by 4pm. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note may occur. FWL recommend using an auto transformer speed controller. Fans are supplied at catalogue stated angle. Should you wish for the pitch angle to be adjusted, we would be happy to offer a quotation.
41
FANS
Dimensions
Motor 112
A 630
B 724
C 1040
D 403
E 3
H 690
L 580
M 630
N 10
P 400
S 12
T 12
V 50
W 954
Wiring Diagrams
CD1343
Fan
FANS
SuperLite - JM Aerofoil
Accessories
Note: Flexible connection weight includes two matching flanges. Suitable for up to 600C emergency operation for 2 hours and 200C continuous.
JM Mounting Feet
Product Code 315 355 400 450 500 560 630 710 Product Number DA408199 DA408200 DA408201 DA408202 DA408203 DA408204 DA243495 DA245874 245024 249468 249467 249258 249464 249255 G 175 200 225 255 290 330 375 415 485 485 491 491 547 547 L 265 305 350 400 450 510 580 660 750 750 850 850 950 950 M 315 355 400 450 500 560 630 710 800 800 900 900 1000 1000 N 10 10 10 10 10 10 10 10 12 1 12 12 10 12 P 200 225 250 280 315 355 400 440 510 510 518 518 574 574 T 10 10 12 12 12 12 14 14 14 14 14 14 15 15 V 20 20 20 20 25 25 25 25 25 25 25 25 25 25 W 60 60 60 60 65 65 65 80 80 80 60 60 60 60
SUPERLITE - JM ACCESSORIES
JM Damper
Suitable for fan A 315 355 400 450 500 560 630 710 800 900 1000 Product Number 414942 414943 414944 414945 414473 414474 414475 414476 414477 414478 414479 C 225 225 225 225 225 D 17 39 75 Weight (kg) 8 9 10 12 16 18 20 23 27 31 36
225 125 225 176 225 210 225 270 225 305 225 345
43
FANS
SuperLite - JM Aerofoil
Accessories
fan with flanged inlet only
Suitable for fan A 315 355 400 450 500 560 630 710 800 900 1000 Product Number 408593 248950 74880 248952 74881 248953 74882 74883 74884 404842 74885 C 65 85 80 95 87 100 108 126 134 150 167 D 379 423 480 536 600 668 757 857 957 1077 1199 Weight (kg) 1 1.2 1.5 2 3.2 4 4.8 5.4 6.8 8 17.8
JM Bellmouth Inlet -
Controller - Inverter
Type FWX1 FWX2 FWX3 FWX4 FWX5 FWX6 FWD7 FWD8 FWD9
Product Number 430412 430413 430414 430415 430416 430417 416522 416523 416524
14.2 14.2 23 23 23
Controller - Electronic
B 83 87 87 180
C 55 62 62 81
D 40 47 47 65
SUPERLITE - JM ACCESSORIES
44
14.2
FANS
SuperLite - JM Aerofoil
Accessories
Controller - Transformer
Type
JM - Guard
Suitable for fan A 315 315 355 355 400 400 Type l lV l lV l lV l lI lV l lI lV l lI lV l lI lII lV l lI lII lV l lI lII lV l lI lII lV l lI lII lV C 137 30 137 30 137 30 137 137 30 137 137 30 137 137 50 137 137 350 50 137 137 350 50 137 137 350 50 137 137 310 50 137 137 310 50 Weight (kg) 1.2 0.5 1.4 0.5 1.6 0.6 1.8 1.6 0.6 2 1.8 0.7 2.2 2 1 2.8 2.6 3 1.2 3.2 3 3.4 1.4 3.5 3.3 3.9 1.5 4.2 4.2 4.8 1.7 5 4.8 5.6 2
SUPERLITE - JM ACCESSORIES
450 450 450 500 500 500 560 560 560 630 630 630 630 710 710 710
Type I and Type II Impeller Side L&S Motor Side S Type (BT, CT & F22)
710 800 800 800 800 900 900 900 900 1000 1000 1000
1000
45
FANS
SuperLite - JM Aerofoil
Accessories
Silencer
Bore Dia. mm (D) 315 355 400 450 500 560 630 710 800 900 1000
Product Number SB211401 SB221401 SB241401 SB251401 SB271401 SB281401 SB301401 SB311401 SB331401 SB341401 SB351401
B 415 455 500 600 650 710 780 860 1000 1100 1200
C 315 355 400 450 500 560 630 710 800 900 1000
Weight (kg) 10 12 15 20 25 30 35 44 55 82 70
Bore Dia. mm (D) 315 355 400 450 500 315 355 400 450 500 560 630 710 800 900 1000 560 630 710 800 900 1000
Acoustic Performance dB(A) Octave Band Mid Frequency Hz 63 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 4 3 3 3 4 4 5 125 2 2 3 3 3 5 5 6 4 3 4 5 5 5 5 5 5 5 5 5 5 5 250 4 4 5 6 6 5 6 6 7 8 7 7 7 8 10 11 8 8 8 8 9 11 500 9 10 10 12 13 9 9 10 13 16 14 15 15 16 17 16 16 15 15 16 17 18 1K 11 12 13 13 14 18 18 19 20 21 14 13 13 12 13 11 20 19 19 19 19 19 2K 10 10 11 11 10 20 22 24 23 22 19 8 9 9 11 10 18 16 15 15 15 15 4K 9 9 9 10 10 18 19 20 22 21 10 9 9 9 10 8 19 14 14 14 14 14 8K 7 7 8 6 5 15 16 17 17 17 7 8 8 8 8 9 15 12 12 13 13 13
dBA Reduction B Type -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 -7 to 10 C Type -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15 -12 to 15
The above silencers give the following approximate dBA reductions: B Type 1 diameter length - 7 to 10 dBA. C Type 1 diameter length - 12 to 15 dBA. For full acoustic details and resistance to airflow for type C see publications SP01. Bold text denotes next day delivery available if ordered by 4pm.
SUPERLITE - JM ACCESSORIES
46
FANS
SuperLite - JM Aerofoil
Accessories
Type ES20/10/ZSB Purple ES20/15/ZSB Yellow ES20/20/ZSB Grey ES25/60/7SB Green ES25/100/ZSB Blue
A 76 76 76 110 110
B 38 38 38 70 70
C 60 60 60 90 90
D 54 54 54 85 85
E 48 48 48 78 78
F 66 66 66 94 94
G 3 3 3 6 6
H M8 M8 M8 M10 M10
J 40 40 40 60 60
SUPERLITE - JM ACCESSORIES
Note: These vibration isolators are not suitable for use with JM Aerofoil HT category 300/1 and 400/2 series smoke venting fans - please use spring isolators.
Load range per mounting (kg) 0-4 0-9 5-28 9-50 23-180 35-280 48-400
A 64 64 80 80 95 95 150
B 43 43 45 45 60 60 86
C 2 2 5 5 5 5 6
E 20 20 32 32 45 45 70
F 50 50 57 57 71 71 115
J 41 41 56 56 82
K 12 12 14 14 22
L 9 9 9 9 11
47
FANS
315mm to 630mm diameter Volume flow up to 5m3/s Static pressures up to 625 Pa Ideal replacement fan
SIZES 315, 350, 400, 450, 500, 560 and 630 ELECTRICAL SUPPLY 230 / 50Hz / 1 Ph FEATURE AND CONSTRUCTIONS
LR S e t i L r e p u e l S b la W i E a N v a e h T now
A unique multiple mounting design that offers maximum flexibility for plug and play installations reducing time and cost to install. A durable paint-over-galvanized steel construction (white paint as standard) allows these fans to be used in many locations for various applications. Utilising external rotor motors, all speed controllable, that offer a compact solution ideal for retrofit applications regardless of where fan is to be replaced! With integral accessories, all parts for the complete solution are provided as a simple component. The optimum fans solution for most HEVAC applications. IMPELLERS Metal impellers on all sizes MOTOR External rotor motor with class F installation TEMPERATURE Operating temperature ranging from -30C to 70C ELECTRICAL CONNECTION The motors are fitted with an out going cable. The electrical connection can be made by an IP55 terminal box mounted on the side of the fan. AIR PERFORMANCE CURVES The fans were tested in accordance to DIN 24163 and conducted with an inlet cone, without protection guard
axial alternative,
ACCESSORIES
Electronic speed controllers and flexible connectors available for all sizes 315-630mm Horizontal mounting and vertical mounting kit available
CASED FANS
Performance Data
SL(R, H or V) 315mm - 500mm
350
300
250
Static Pressure (Pa)
200
150
100
50
Please contact Flkt Woods if you would like to select along the dotted line
700
600
400
560 630
300
200
100
49
CASED FANS
Electrical Details
220-240V/50Hz/1ph Product Code Speed rev/min Product Number Motor Rating (kW) Full Load Starting Current Current (at 230v) (at 230v) (A) (A) Speed Controllers Product Code Part Number Total LpA @ 3m
SLR315 SLV315 SLH315 SLR355 SLV355 SLH355 SLR400 SLV400 SLH400 SLR450 SLV450 SLH450 SLR500 SLV500 SLH500 SLR560 SLV560 SLH560 SLR630 SLV630 SLH630 1365 1140 1260 1310 1335 1330 1315
BZ490014 BZ490000 BZ490001 BZ490015 BZ490002 BZ490003 BZ490016 BZ490004 BZ490005 BZ490017 BZ490006 BZ490007 BZ490018 BZ490008 BZ490009 BZ490019 BZ490010 BZ490011 BZ490020 BZ490012 BZ490013 2.10 9.30 27.90 ME1.12 DA414855 60 1.15 5.10 9.18 ME1.6 DA410291 61 0.67 3.30 6.60 ME1.6 DA410291 59 0.60 3.00 6.30 ME1.3 DA410290 58 0.32 1.40 2.38 ME1.3 DA410290 59 0.22 0.95 2.19 ME1.1 DA410289 56 0.14 0.65 1.24 ME1.1 DA410289 53
Sound power levels are non-ducted, measured at mid point on the fan characteristic. Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only. For accessories please see pages 43 - 47 for further information. Bold text denotes next day delivery available if ordered by 4pm. For wiring diagrams please enquire.
Product Number
BZ490014 BZ490015 BZ490016 BZ490017 BZ490018 BZ490019 BZ490020
A
319 358 406 453 506 560 633
B
383 438 486 533 596 650 723
C
150 150 165 165 165 210 220
D
159.5 179 203 226.5 253 280 316.5
S
8 8 8 8 12 12 12
T
10 10 12 12 12 12 12
H
355 395 450 500 560 620 690
Weight (Kg)
8 9 12 15 19 24 39
CASED FANS
J (CRS) G
C (CRS) D
Product Code
SLH315 SLH355 SLH400 SLH450 SLH500 SLH560 SLH630
Product Number
BZ490001 BZ490003 BZ490005 BZ490007 BZ490009 BZ490011 BZ490013
A
313 353 398 448 498 558 628
B
220 220 235 235 235 280 290
C
197 197 212 212 212 257 267
D
247 247 262 262 262 307 217
E
411 460 512 579 624 679 750
F
425 472 530 571 626 682 755
G
315 355 400 450 500 560 630
H
219 240 269 312 324 354 630
I
192 220 243 267 297 325 361
J
265 305 350 400 450 510 580
Weight (Kg)
10 12 15 18.5 23 28 45
C (CRS)
Product Code
SLV315 SLV355 SLV400 SLV450 SLV500 SLV560 SLV630
Product Number
BZ490000 BZ490002 BZ490004 BZ490006 BZ490008 BZ490010 BZ490012
J (CRS)
A
313 353 398 448 498 558 628
B
220 220 235 235 235 280 290
C
399 441 498 547 608 668 738
D
438 480 538 587 648 708 778
E
233.5 233.5 248 248 248 303.5 313.5
F
452 493 556 598 653 711 783
G
315 355 400 450 500 560 630
H
384 440 286 534 594 650 722
I
25 25 25 25 25 30 30
J
265 305 350 400 450 510 580
Weight (Kg)
10 12 15 18.5 23 28 45
51
CASED FANS
Flange to ducting
Flange to flange
Please note: mounting accessories available for SLV and SLH range only.
Flexible Connectors
Product Code
315
(including clips)
Product Number
AS040315 AS040355 AS040400 AS040450 AS040500 AS040560 AS040630
Flange to ducting
Flange to flange
Please note: mounting accessories available for SLV and SLH range only.
FANS
FANS
315mm - 630mm diameter Volume flow up to 4.1 m3/s
SIZES 31JMP - (315mm) to 63JMP - (630mm) FAN PERFORMANCE Coupled with the above fan diameters the speed controllable motor allows the exact performance required to be obtained. IMPELLERS A unique high efficiency aerofoil section blade. The Flkt Woods impellers are all high pressure die cast to offer thin aerofoil sections for low generation of noise. Every cast aluminium component is X-ray examined using Real Time Radiography inspection prior to assembly. The maximum pitch angles shown allow for speed control by frequency inverter. MOTORS All motors are totally enclosed airstream rated class F insulation. Constructed from aluminium as standard with special pad fixings. Suitable for horizontal through to vertical shaft operation. Supplied IP55 with removable drain plugs. These motors are suitable for inverter speed control down to 20% of full speed. ELECTRICAL SUPPLY 220 - 240V / 50Hz / 1 Ph 380 - 420V / 50Hz / 3 Ph TEMPERATURE RANGE -40C to 50C as standard. Fans can be continuously operated at temperatures up to 70C. Whilst these fans are operating in excess of 50C fans should be run at full speed only. PLATES Manufactured from mild steel with powder coat finish, fans are supplied as standard with motor side guard. ACCESSORIES Louvre shutter, Motor side guard, Bell mouth inlet and Electronic transformer and inverter type speed controllers. For a full range of accessories please see page 56.
FANS
Performance Data
Product Code 31JMP/16/4/5/... 35JMP/16/4/5/... 40JMP/16/4/5/... 45JMP/16/4/5/... 50JMP/16/4/5/... 56JMP/16/4/5/... 63JMP/20/4/3/... 45JMP/16/4/5/... 50JMP/16/4/5/... 56JMP/16/4/5/... 63JMP/20/4/3/... m3/s at Pa (Static) 25 0.58 0.79 1.39 1.95 2.32 3.2 3.93 1.89 2.32 3.2 3.93 50 0.51 0.72 1.29 1.82 2.2 3.08 3.78 1.82 2.2 3.08 3.78 75 0.44 0.65 1.17 1.69 2.06 2.95 3.6 1.69 2.06 2.95 3.6 0.9 1.55 1.92 2.8 3.41 1.55 1.92 2.8 3.41 1.36 1.75 2.65 3.25 1.4 1.75 2.65 3.25 2.47 3 2.27 2.7 2.47 3 2.27 2.7 100 125 150 175
Electrical Data
Product Code Speed rev/min Motor Product Number Pitch Angle Motor Rating (kW) Full Load Current (at 230V) (A) Starting Current (at 230V) (A) Wiring Diagram Ref Speed Controller Electronic Transformer Sound Level dBA
220-240V/50Hz/1 Ph 31JMP/16/4/5/... 35JMP/16/4/5/... 1420 1440 1440 1440 1440 1440 1420 BT4 BT4 BT9 CT5 CT5 CT9 CT9 DT315410 DT355410 DT405410 DT455410 DT505410 DT565411 DT635411 40 34 40 40 30 30 24 0.095 0.13 0.32 0.52 0.52 0.97 0.97 380-420V/50Hz/3 Ph 45JMP/16/4/5/... 50JMP/16/4/5/... 56JMP/16/4/5/... 63JMP/20/4/3/... 1440 1440 1385 1385 CT5 CT5 CT9 CT9 DT455430 DT505430 EP565430 EP635430 40 30 30 24 0.54 0.54 0.9 0.9 1.8 1.8 1.92 1.92 4.9 4.9 9.78 9.78 CD2410 CD2410 CD2416 CD2416 0.8 1.0 2.2 3.9 3.9 6.7 6.7 1.3 1.8 5.0 7.8 7.8 13.5 13.5 CDW2100 CDW2100 CDW2100 CDW2100 CDW2100 CDW2100 CDW2100 ME1.3 ME1.3 ME1.3 ME1.6 ME1.6 ME1.6 ME1.6 Transformer MT3.2 MT3.2 MT3.7 MT3.7 MT1.1.5 MT1.1.5 MT1.5 MT1.5 MT1.5 MT1.8 MT1.8 Inverter FWX1 FWX1 FWX2 FWX2 58 62 66 70 45 47 54 58 62 66 70
Sound Levels
Sound Power Levels (dB) Product Code 63 315 mm Inlet Outlet Inlet Outlet Inlet Outlet Inlet Outlet Inlet Outlet Inlet Outlet Inlet Outlet 57 64 61 68 63 76 67 80 70 83 74 87 78 91 125 69 68 73 72 71 76 75 80 78 83 82 87 86 91 In Octave Band Centre Frequency - Hz 250 63 64 67 68 71 72 75 76 78 79 82 83 86 87 500 62 62 66 66 75 73 79 77 82 80 86 84 90 87 1K 59 59 63 63 71 69 75 74 78 76 82 80 86 84 2K 57 57 61 61 66 66 70 70 73 73 77 77 81 81 4K 53 55 57 59 62 63 66 67 69 70 73 74 77 78 8K 47 49 51 53 57 60 61 64 64 67 68 71 72 75 Sound Pressure Level dBA 44 45 48 47 55 54 59 58 62 58 66 61 70 64
355 mm
400 mm
450 mm
500 mm
560 mm
630 mm
Bold text denotes next day delivery available if ordered by 4pm. Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only.
55
FANS
Dimensions
Aluminium frames, plastic shutters. Shutters must be separated from the fan mounting plane by the following minimum distances: Up to 500mm 560 to 630mm 150mm 200mm
Note that under some combinations of fan speed and wind the shutters vanes may become unstable. This is more likely to occur at reduced fan speed.
G 18 20 22 24 26 28 28 23 23
Weight (kg) 10 11 14 17 18 23 28 26 31
63JMP/16/4/3/24
Controller - Electronic
Controller - Transformer
A 148 148
B 87 87
C 62 62
D 47 47
Type
Inverter
Type FWX1 Product Number 430412 A 420 B 242 C 195 Weight (kg) 14.2
FANS
Wiring Diagrams
CDW2100 Fan
CD2410 Fan
U1
V1
W1 U2
W2
V2
PE
L1
L2
L3
PE
PE
UZ
TK
TK
230VAC OUTPUT
NOTE: IF FAN HAS A BUILT IN THERMOSTAT, WIRE K, K OF THE FAN BACK ACROSS TK TERMINALS. IF NOT PLEASE CONNECT A LINK AS SHOWN.
CD2416
Star
Overheat Protection
U1 V1 W1 U2 W2 V2
S S = Thermistors K K = Thermostat
(L1)
(L2)
W
(L3)
57
FANS
315mm to 630mm diameter Volume flow up to 3.2 m3/s Static pressures up to 130 Pa Low profile Suitable for a wide range of applications
SIZES 315, 350, 400, 450, 500, 560 and 630 ELECTRICAL SUPPLY 230V / 50Hz / 1 Ph FEATURES AND CONSTRUCTION High efficiency axial fans are used wherever large air volumes must be conveyed against low up to medium pressure. High efficiency axial fans with square inlet cone are used for ventilating restaurants, gymnasiums, conference rooms, workshops, warehouses, swimming pools and greenhouses. IMPELLERS The high efficiency axial fans have aerodynamically profiled blades made of metal. Blades are mounted directly to the rotor of the external rotor motor. All motors have voltage controllable external rotor motors protection class IP54 with protection against humidity, thermal contact embedded in the windings.
An IP55 Terminal Box is attached to the back of the motor. Customer connection is made at this Terminal Box. AIR PERFORMANCE CURVES The performance curves for these fan types have been measured in mounting position A (free inlet; free outlet) and show the pressure increase pfa as a function of the air flow; version with inlet cone and without protection guards. ACCESSORIES Electronic speed controllers and cowls only are available.
ELECTRICAL CONNECTION
CASED FANS
Performance Data
315-500
350
300
250
200
150
PF SL 500-4
100
50
Please contact Flkt Woods if you would like to select along the dotted line
560-630
700
600
500
Static Pressure (Pa)
400
PF SL 560-4 PF SL 630-4
300
200
Please contact Flkt Woods if you would like to select along the dotted line
100
0 0 1 2 3
Volume Flow (m /s)
3
Electrical Data
220-240V/50Hz/1ph Product Code Speed rev/min Product Number Motor Rating (kW)
0.14 0.22 0.32 0.60 0.67 1.15 2.10
Full Load Starting Current Current (at 230v) (at 230v) (A) (A)
0.65 0.95 1.40 3.00 3.30 5.10 9.30 1.24 2.19 2.38 6.30 6.60 9.18 27.90
Part Number
DA410289 DA410289 DA410290 DA410290 DA410291 DA410291 DA414855
Total LpA @ 3m
53 56 59 58 59 61 59
Bold text denotes, next day delivery available if ordered by 4pm. For wiring diagrams please enquire.
59
CASED FANS
Sound Levels
Product Code
PF SL 315-4 PF SL 350-4 PF SL 400-4 PF SL 450-4 PF SL 500-4 PF SL 560-4 PF SL 630-4
Product Number
PF315104 PF350104 PF400104 PF450104 PF500104 PF560104 PF630104
250
64 67 70 67 70 71 72
500
64 67 70 73 70 74 71
1K
64 67 70 73 70 76 71
2K
63 66 69 73 69 75 69
4K
55 58 61 71 61 71 61
8K
69 72 75 57 75 62 76
Total LpA @ 3m
53 56 59 58 59 61 60
Sound power levels are non-ducted, measured at mid point on the fan characteristic. Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only.
a c
Product Number
PF315104 PF350104 PF400104 PF450104 PF500104 PF560104 PF630104
Size
315 350 400 450 500 560 630
B
85 72 50 55 36 72 36
a
82 86 86 100 120 120 150
b
11 12 12 14 16 16 20
c
86 112 133 168 187 152 187
D
317 358 403 452 504 560 635
E
430 485 540 575 655 725 805
F
380 435 490 535 615 675 750
H
9 9 9 11 11 11 11
Weight (Kg)
6 6 6.8 13 18 20 36
FANS
Speed Controllers
Product Code ME1.1 ME1.3 ME1.6 ME1.12 Product Number DA410289 DA410290 DA410291 DA414855 A 104 148 148 210 B 83 87 87 180 C 55 62 62 81 D 40 47 47 65
Cowl Only
Product Number RA315104 RA350104 RA400104 RA450104 RA500104 RA560104 RA630104 RA710106 RA800106 RA100108 Size 315 350 400 450 500 560 630 710 800 1000 A 555 675 765 765 995 995 1115 1115 1410 1650 B 340 380 460 460 550 550 650 650 750 750 C 90 90 90 90 120 120 120 120 100 80 D 380 435 490 535 615 675 750 810 910 1110 E 9 9 9 11 11 11 11 14.5 14.5 14.5 Weight (kg) 6.5 8.5 12 12 18 18 25 25 30 40
B C
D = = E
61
FANS
100mm to 315mm diameter Volume flow up to 0.5 m3/s Static pressures up to 720 Pa Plastic cased fan Low noise levels Completely corrosion resistant
SIZES 100, 125, 150, 160, 200, 250 and 315 FEATURES AND CONSTRUCTION The casings of sizes 100 - 315 are equipped with an attractive, impact resistant and hardly inflammable plastic casing with integrated IP44 terminal box and guide vane. The impeller up to 250 is made of plastic. The impeller of the 315 is made of galvanised steel. INSTALLATION Rigid folded spiral-seam ducts (Spiro), flexible aluminium or plastic ducts with standardised diameter can be used. ELECTRICAL SUPPLY 230V / 50Hz / 1 Ph WIRING Insulation class F with additional moisture protection impregnation and thermal contacts which are connected in series with the windings of the motor. ACCESSORIES The range of accessories include duct clamps, dampers, silencers, mounting brackets and electronic speed controllers (please see pages 69 - 70).
FANS
Performance Data
800
700
600
500
400
300
200
100
Electrical Data
Motor (kW)
0.065 0.065 0.07 0.115 0.16 0.16 0.3
Product Number
DA410289 DA410289 DA410289 DA410289 DA410289 DA410289 DA410290
ILC - PS100L ILC - PS125L ILC - PS150 ILC - PS160L ILC - PS200L ILC - PS250L ILC - PS315L
Bold text denotes, next day delivery available if ordered by 4pm. For wiring diagrams please enquire.
63
FANS
Sound Data
Product Code Product Number
Casing ILC - PS100L TF100022 Inlet Side Outlet Side Casing ILC - PS125L TF125022 Inlet Side Outlet Side Casing ILC - PS150 TF150022 Inlet Side Outlet Side Casing ILC - PS160L TF160022 Inlet Side Outlet Side Casing ILC - PS200L TF200022 Inlet Side Outlet Side Casing ILC - PS250L TF250022 Inlet Side Outlet Side Casing ILC - PS315L TF315022 Inlet Side Outlet Side Sound Power Levels (dB) In Octave Band Centre Frequency - Hz
125
33 43 42 33 43 42 33 40 37 41 45 43 41 50 50 40 50 49 41 44 44
250
42 54 53 42 55 53 40 54 49 43 58 55 46 60 59 45 60 58 49 56 56
500
44 57 54 44 58 55 43 55 47 51 61 55 54 65 58 52 61 58 51 63 63
1K
47 56 54 47 57 56 43 55 51 50 63 60 51 64 62 48 63 62 51 64 64
2K
44 54 53 44 56 54 44 54 52 47 62 62 48
4K
38 51 49 38 51 49 32 50 49 39 59 58 41 59 58 40 58 57 47 62 61
8K
27 41 40 27 41 40 23 41 39 30 50 50 31 49 49 31 47 47 38 55 58
Total dBA @ 3m
30 41 39 30 42 40 28 40 36 34 47 45 36
Sound power levels are non-ducted, measured at mid point on the fan characteristic. Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only.
64 46 61 62 50 65 65
47 34 47 46 63 49
A B
49
A B
E F
Product Code
100L 125L 150 160L 200L 250L 315L
Product Number
TF100022 TF125022 TF150022 TF160022 TF200022 TF250022 TF315022
A
160 160 170 170 170 170 215
B
220 220 230 230 230 230 275
C
100 124 149 159 199 249 314
D
30 30 30 30 30 30 30
E
97.6 97.5 135.7 135.7 135.7 135.7 160.7
F
245 245 340.5 340.5 340.5 340.5 405
Weight (Kg)
2.4 2.4 3 3.2 3.7 3.7 5.8
64
49
FANS
FANS
100mm to 400mm diameter Volume flow up to 1.45 m3/s Static pressures up to 910 Pa Casing made of galvanized sheet steel Backward curved impeller
SIZES 100, 125, 150, 160, 200, 250, 315, 355 and 400 FEATURES AND CONSTRUCTION The casings of sizes 100 - 400 are manufactured of galvanized sheet steel. The fans are driven by an external rotor motor, protection class IP44/54, fitted in the centrifugal impeller. INSTALLATION Rigid folded spiral-seam ducts (Spiro), flexible aluminium or plastic ducts with standardised diameter can be used. ELECTRICAL SUPPLY 230V / 50Hz / 1 Ph WIRING Insulation class F with additional moisture protection impregnation and thermal contacts which are connected in series with the windings of the motor. ACCESSORIES The range of accessories include duct clamps, dampers, silencers, mounting brackets and electronic speed controllers (please see pages 69 - 70).
CASED FANS
Performance Data
1000
900
800
700
ILC - MS100L
Static pressure (Pa)
600
ILC - MS125L ILC - MS150L ILC - MS160L ILC - MS200L ILC - MS250L ILC - MS315L ILC - MS355L ILC - MS400LE
500
400
300
200
100
0
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
Volume m/s
Electrical Data
220-240V/50Hz/1Ph Product Code Product Number Speed (RPM)
2470 2480 2520 2500 2410 2470 2440 2340 1350
Motor (kW)
0.065 0.065 0.11 0.11 0.17 0.165 0.3 0.61 0.7
Product Number
DA410289 DA410289 DA410289 DA410289 DA410289 DA410289 DA410290 DA410290 DA410291
ILC - MS100L ILC - MS125L ILC - MS150L ILC - MS160L ILC - MS200L ILC - MS250L ILC - MS315L ILC - MS355L
Bold text denotes, next day delivery available if ordered by 4pm. For wiring diagrams please enquire.
67
CASED FANS
Sound Data
Product Code Product Number
Casing ILC - MS100L TF100012 Inlet Side Outlet Side Casing ILC - MS125L TF125012 Inlet Side Outlet Side Casing ILC - MS150L TF150012 Inlet Side Outlet Side Casing ILC - MS160L TF160012 Inlet Side Outlet Side Casing ILC - MS200L TF200012 Inlet Side Outlet Side Casing ILC - MS250L TF250012 Inlet Side Outlet Side Casing ILC - MS315L TF315012 Inlet Side Outlet Side Casing ILC - MS355L TF355012 Inlet Side Outlet Side Casing ILC - MS400LE TF400011 Inlet Side Outlet Side Sound Power Levels (dB) In Octave Band Centre Frequency - Hz
125
36 45 44 36 48 47 45 51 51 45 51 51 42 50 47 43 48 49 41 47 46 46 56 57 48 57 56
250
42 53 54 42 53 55 47 59 59 47 59 59 49 61 57 45 59 59 49 59 58 56 69 60 56 69 69
500
41 56 56 42 56 56 47 63 59 47 63 59 48 63 58 47 65 59 51 68 62 57 69 69 57 69 72
1K
42 57 57 43 59 58 46 62 61 46 62 61 49 64 62 51 65 63 51 69 68 61 70 72 56 67 74
2K
41 54 55 43 56 56 43 62 59 43 62 59 46 62 62 48 63 63 50 67 68 58 65 70 52 64 71
4K
33 51 50 36 52 53 39 54 53 39 54 53 40 57 57 44 58 58 47 66 65 55 63 66 47 59 63
8K
26 41 40 28 43 42 30 46 44 30 46 44 32 50 50 34 49 49 38 61 63 40 55 60 39 52 55
Total dBA @ 3m
27 41 41 28 42 42 32 47 45 32 47 45 33 48 46 34 49 47 36 53 52 44 54 55 41
Sound power levels are non-ducted, measured at mid point on the fan characteristic. Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only.
56
Product Number
TF100012 TF125012 TF150012 TF160012 TF200012 TF250012 TF315012 TF355012 TF400011
A
136 140 140 195 180 180 195 320
B
186 190 190 245 230 230 255 395
C
242 242 341 341 341 341 402 490
D
100 125 150 160 200 250 315 355
E
25 25 25 25 25 30 30 40
F
25 25 25 25 25 30 30 35
Weight Kg
2.6 2.6 3.7 3.4 4.2 5.5 6 14 31
See below
A B
230
200
170 12 333
40 600
40
43
625
564
400
662
CASED FANS
Accessories
Duct Clamps
Product Code CP-FL100D CP-FL125D CP-FL150D CP-FL160D CP-FL200D CP-FL250D CP-FL315D CP-FL355D CP-FL400D Product Number CP100000 CP125000 CP150000 CP160000 CP200000 CP250000 CP315000 CP355000 CP400000 D 100 125 150 160 200 250 315 355 400
70
Dampers
Product Code ABS100D ABS125D Product Number BS100000 BS125000 BS150000 BS160000 BS200000 BS250000 BS315000 BS355000 BS400000 Dia 100 125 150 160 200 250 315 355 400 L 96 96 96 96 113 113 113 113 113
Silencers
Product Code BDER-30-010-030 BDER-30-010-060 BDER-30-010-090 BDER-30-010-120 BDER-30-012-030 BDER-30-012-090 BDER-30-012-120 BDER-30-016-030 BDER-30-016-060 BDER-30-016-090 BDER-30-016-120 BDER-30-020-060 BDER-30-020-090 BDER-30-020-120 BDER-30-025-060 BDER-30-025-090 BDER-30-025-120 Product Number SL000345 SL000344 SL000343 SL000342 SL000341 SL000339 SL000338 SL000333 SL000332 SL000331 SL000330 SL000328 SL000327 SL000326 SL000324 SL000323 SL000322 Dia 100 100 100 100 125 125 125 160 160 160 160 200 200 200 250 250 250 Height 200 200 200 200 225 225 225 260 260 260 260 300 300 300 355 355 355 Weight (kg) 2.4 4.1 6.6 9.5 2.6 7.6 11 2.9 5.8 9 13 7 10 14 8.6 12.2 18
outside
Height bbb
ccc
Ordering key
Sound absorbers Size (bbb) Length (ccc) BDER-30-bbb-ccc
69
CASED FANS
Accessories
Mounting Brackets
b a
6.5 x 18.5
c 47 47 47
Speed Controllers
B 83 87 87
C 55 62 62
D 40 47 47
All dimensions shown in mm Bold text denotes next day delivery available if ordered by 4pm.
CASED FANS
FANS
125mm to 400mm diameter Volume flow up to 0.7 m3/s Static pressures up to 530 Pa Extremely flat construction Low noise Installed in any position
SIZES 125, 150, 160, 200, 250, 315, 355 and 400 ELECTRICAL SUPPLY 230V / 50Hz / 1 Ph CASING Casing is made of galvanized sheet steel. The inlayed 40mm thick rockwool plates has a high a sound attenuating effect. The covering lid can easily be unscrewed, to gain access for cleaning and maintenance. The motor is removable together with the impeller and spiral scroll.
The external rotor motors are in accordance with protection class IP44/54, with moisture protection impregnation and thermal overload contacts. The impellers are forward curved with double inlet and forward curved with single inlet. ELECTRICAL CONNECTION The electrical connection can be made via an IP44/IP54 terminal box MOTOR Motor protection by thermal contacts INSTALLATION Rigid folded spiral-seam ducts (Spiro), flexible aluminium or plastic ducts with standardized diameter can be used. SingleBoxes can be installed in any positions. PERFORMANCE CURVES The performance curves for these fan types have been measured in mounting position D (installed on the pressure side and open on the suction side) and show the total pressure increase pt as a function of the air flow. The dynamic pressure pd2 refers to the flange cross section at the outlet side of the fan. ACCESSORIES The range of accessories include duct clamps, dampers, silencers and electronic speed controllers.
IMPELLERS
CASED FANS
Performance Data
600
500
400
Static pressure (Pa)
100
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Volume m/s
Electrical Data
220-240V/50Hz/1ph Product Code Product Number Speed (RPM) Motor (kW) Full Load Current (A)
0.43 0.54 0.54 0.9 1.4 2.6 3 4
Bold text denotes next day delivery available if ordered by 4pm. For wiring diagrams please enquire.
73
CASED FANS
Sound Levels
Product Code Product Number
inlet side SB SL 125E1 ZE125001 outlet side casing inlet side SB SL 150E1 ZE150001 outlet side casing inlet side SB SL 160E1 ZE160001 outlet side casing inlet side SB SL 200E1 ZE200001 outlet side casing inlet side SB SL 250E2 ZE250002 outlet side casing inlet side SB SL 315E1 ZE315001 outlet side casing inlet side SB SL 355E1 ZE355001 outlet side casing inlet side SB SL 400E1 ZE400001 outlet side casing Sound Power Levels (dB) In Octave Band Centre Frequency - Hz
125
34 48 32 39 45 40 39 45 40 49 53 43 50 51 48 49 58 52 50 60 47 53 62 51
250
36 55 34 41 54 38 41 54 38 47 59 42 51 60 46 50 64 51 51 64 49 54 63 53
500
34 55 33 40 57 35 40 57 35 44 62 38 48 64 41 44 67 43 42 67 40 49 66 47
1K
33 57 29 39 63 34 39 63 34 45 65 36 46 70 39 45 67 37 46 67 39 51 70 41
2K
29 57 28 38 64 33 38 64 33 42 67 33 46 71 39 47 66 31 48 66 36 51 68 37
4K
28 54 26 36 59 29 36 59 29 40 62 28 45 66 34 44 64 26 47 63 29 52 68 31
8K
23 45 22 31 53 23 31 53 23 33 56 23 36 61 27 36 54 24 37 54 26 45 61 26
Total dBA @ 3m
20 42 18 26 47 23 26 47 23 32 50 26 35 54 30 34 52 34 35 52 31 39 54 35
Sound power levels are non-ducted, measured at mid point on the fan characteristic. Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only.
CASED FANS
F H G
A B D
F J G
K I
Product Size
SB SL 125E1 SB SL 150E1 SB SL 160E1 SB SL 200E1 SB SL 250E2 SB SL 315E1 SB SL 355E1 SB SL 400E1
A
460 460 460 490 490 680 680 680
B
360 360 360 390 390 580 580 650
C
340 340 340 365 465 595 595 645
D
170 170 170 182.5 232.5 210.0 230.0 250.0
E
170 170 170 182.5 232.5 385 365 295
F
125 150 160 200 250 315 335 400
G
170 185 185 200 175 227.5 227.5 250
H
260 260 260 315 315 425 425 475
I
390 390 390 420 420 610 610 610
J
320 320 320 345 445 575 575 625
K
9 9 9 9 9 9 9 9
L
25 25 25 25 25 25 25 25
Weight Kg
11 12.5 12.5 14 18.5 40 40 46
Duct Clamps
Product Code CP-FL100D CP-FL125D CP-FL150D CP-FL160D CP-FL200D CP-FL250D CP-FL315D CP-FL355D CP-FL400D Product Number CP100000 CP125000 CP150000 CP160000 CP200000 CP250000 CP315000 CP355000 CP400000 D 100 125 150 160 200 250 315 355 400
All dimensions shown in mm Bold text denotes next day delivery available if ordered by 4pm.
70
75
CASED FANS
Dampers
Product Code ABS100D ABS125D ABS150D ABS160D ABS200D ABS250D ABS315D ABS355D ABS400D Product Number BS100000 BS125000 BS150000 BS160000 BS200000 BS250000 BS315000 BS355000 BS400000 Dia 100 125 150 160 200 250 315 355 400 L 96 96 96 96 113 113 113 113 113
Silencers
Product Code Product Number Dia 100 100 100 100 125 125 125 160 160 160 160 200 200 200 250 250 250 Height 200 200 200 200 225 225 225 260 260 260 260 300 300 300 355 355 355 Weight (kg) 2.4 4.1 6.6 9.5 2.6 7.6 11 2.9 5.8 9 13 7 10 14 8.6 12.2 18 BDER-30-010-030 SL000345 BDER-30-010-060 SL000344 BDER-30-010-090 BDER-30-010-120 SL000343 SL000342
outside
Height bbb
ccc
Ordering key
Sound absorbers Size (bbb) BDER-30-bbb-ccc
Length (ccc)
Controller - Transformers
Type
MT1.1.5 MT1.5
205 255
115 170
100 140
98 155
140 194
All dimensions shown in mm Bold text denotes next day delivery available if ordered by 4pm.
FANS
FANS
125mm - 400mm diameter spigot sizes Volume flow up to 0.74m3/s Static pressures up to 370 Pa Spigots with double lip neoprene seals as standard Forward curved impellers Acoustically lined box External Terminal Box
INTRODUCTION Often modern building designs restrict the space available to install ventilation equipment. In these situations the size of the ductwork is limited and often the fan itself has to be mounted in ceiling voids close to the building occupants. These restrictions mean that fans need to be compact, reliable and quiet in operation. The Flkt Woods TwinBox units have been specifically designed to meet these requirements. The TwinBox offers 100% Standby, with automatic changeover, in the event of fan failure. SIZES Twin 125, Twin 150, Twin 200, Twin 250, Twin 315, Twin 355, Twin 400 All sizes refer to circular inlet and outlet connections. CONSTRUCTION Casings are manufactured from pre-galvanised sheet steel and are carefully designed to provide a strong and rigid casing. TwinBox units incorporate an internal shutter arrangement to prevent recirculation through the standby fan. Units are designed for duct mounting within the building, for external mounting (weatherproof) refer to Copford range or contact the Colchester office. MOTORS The motor is mounted within the centrifugal impeller to form a compact unit, powered by a single phase 220 - 240V, 50Hz motor, giving silent and virtually vibration free running, operating at temperatures of up to a maximum of between 40C and 70C (depending on model). All motors are manufactured in accordance with BS5000 and incorporate thermal overload protection, they are maintenance free, with sealed for life bearings offering an expected life L10 of 40000 hours. ELECTRICAL SUPPLY 220 - 240V / 50Hz / 1 Ph
WIRING/CONTROLS All units are fully speed controllable using Flkt Woods standard speed controllers. TwinBox units are fitted with a surface mounted Terminal box. Changeover panels are available (ACRC4, or ACRDC4 where duty share is required). SERVICING The top panel of each unit can be removed for inspection and maintenance. The fan assembly can also be easily removed for cleaning purposes. The units can be inverted if bottom access is required. ACCESSORIES Speed controllers, electric heater batteries, panel filter cassettes, and silencers. MOUNTING Suitable for both horizontal and vertical (air up) mounting only.
CASED FANS
Performance Data
Electrical Data
220-240V/50Hz/1ph Speed Control Product Code
MT1.1.5 MT1.1.5 MT1.1.5 MT1.5 MT1.5 MT1.8 MT1.8
Product Code
Product Number
Speed (RPM)
2560 2530 2250 2450 1370 1360 1350
Motor (kW)
0.08 0.08 0.16 0.27 0.68 0.72 0.72
Product Number
DA402008 DA402008 DA402008 DA423099 DA423099 DA402009 DA402009
Sound Data
Product Code TB SL 125 TB SL 150 TB SL 200 TB SL 250 TB SL 315 TB SL 355 TB SL 400 Sound Power Levels (dB) In Octave Band Centre Frequency - Hz 125 54 56 59 61 63 62 65 250 48 49 58 59 59 57 62 500 39 40 50 54 52 51 55 1K 38 39 45 47 52 51 54 2K 32 35 43 45 51 49 52 4K 31 34 41 43 48 48 50 8K 29 33 39 42 42 43 45 Total dBA @ 3m 24 25 33 35 37 36 39
Sound power levels are non-ducted, measured at mid point on the fan characteristic. Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only.
79
CASED FANS
Dimensions
Weight (kg) 3 2 3 4 5 6 8
All dimensions shown in mm Accessories are fitted to units using Solid Duct Fasteners (SDF Size).
Product Code WEHB-125/1kW Type Number Product 402008 423099 402009 A B C D E Max. Weight (kg) 2.1 5.5 8 WEHB-150/1.5kW WEHB-200/2kW WEHB-250/2.5kW WEHB-315/3kW WEHB-355/6kW WEHB-400/9kW
Weight (kg) 4 4 6 7 8 10 11
Min Airflow m3/s 0.03 0.04 0.07 0.1 0.16 0.2 0.26
98 155 255
All dimensions shown in mm Heaters 9kW and above are made of 3kW elements therefore can be connected to 3 Ph supply.
Bold text denotes next day delivery available if ordered by 4pm. For silencers, please see page 169 - 170
FANS
FANS
Speed control available Volume flow up to 8.65 m3/s Pressure development up to 780 Pa Available in Direct or Belt driven Available with IE2 motors on request
MOUNTING ROOF MOUNTED UNITS - TYPE DR AND BR (SF OR PF) Manufactured from mill finish aluminium alloy. Air is discharged to atmosphere through a deep-set single louvred plenum or louvred plenum with birdguard protection and anti-moisture drain points. Electrical isolators are fitted as standard. Duct connections can be provided in a variety of positions and sizes. DUCT MOUNTED UNITS - TYPE DD AND BD (SF OR PF) Manufactured from pre-galvanised sheet steel, arranged for horizontal air discharge. Aluminium units are available - please enquire. Electrical isolators are available on request. Duct connections can be provided in a variety of positions and sizes. FANS The fans are double inlet, double width type using a forward curve impeller fitted within a scroll and either directly connected or through a belt drive to their individual motors. SF units include a single fans, while PF units have duty/standby fans mounted in parallel. SERVICING The fan assembly can be easily removed from the casing for cleaning and maintenance purposes, with swing access. MOTORS The motors are manufactured to BS5000. On direct driven units anti-vibration mounts are fitted between the motor mounting arms and impeller scroll. Overheat protection is a standard fitment to direct drive single phase motors. Belt driven units have the mounts fitted between a common fan base frame and the unit casing. ELECTRICAL SUPPLY 220 - 240V / 50Hz / 1 Ph 380 - 420V / 50Hz / 3 Ph NOISE LEVELS All units are acoustically lined as standard CODE BREAKDOWN D R - Direct drive - Roof mounted B D SF AL - Belt drive - Duct mounted - Single Fan - Acoustically Lined (standard)
FANS
Performance Data
Sound Data
Product Code 63 DRPF/DDPF 1A (AL) or DRSF/DDSF 1A (AL) DRPF/DDPF 2A (AL) or DRSF/DDSF 2A (AL) DRPF/DDPF 3A (AL) or DRSF/DDSF 3A (AL) DRPF/DDPF 4A (AL) or DRSF/DDSF 4A (AL) DRPF/DDPF 5A (AL) or DRSF/DDSF 5A (AL) DRPF/DDPF 6A (AL) or DRSF/DDSF 6A (AL) DRPF/DDPF 7A (AL) or DRSF/DDSF 7A (AL) DRPF/DDPF 8A (AL) or DRSF/DDSF 8A (AL) DRPF/DDPF 8/4A (AL) or DRSF/DDSF 8/4A (AL) DRPF/DDPF 8/6A (AL) or DRSF/DDSF 8/6A (AL) 67 67 68 72 74 79 89 77 79 73 Sound Power Levels (dB) In Octave Band Centre Frequency - Hz 125 65 65 66 70 72 75 85 77 79 73 250 62 58 59 63 65 73 75 75 78 74 500 58 50 49 53 55 69 74 77 74 74 1K 52 50 51 55 57 68 76 75 76 75 2K 49 48 49 53 55 67 76 74 74 73 4K 46 46 47 51 53 61 72 71 71 69 8K 44 44 45 49 51 59 66 66 65 64 Break out Sound Level dBA @ 3m Lined 39 36 37 41 43 53 61 60 60 59
Performance and sound data derived from tests with our Flkt Woods certified laboratory.
Electrical Data
220-240V/50Hz/1 Ph Product Code Nominal Speed RPM 2000 1275 1275 1350 1350 940 1400 900 1250 900 Motor (kW) 0.068 0.155 0.28 0.47 0.68 0.53 1.2 1.8 1.45 1 Full Load Current (at 230V) (A) 0.5 0.9 1.2 2.1 3.2 2.5 5.4 8.5 6.7 5 Starting Current (at 230V) (A) 2.8 4 5.4 8 14 13.6 27.4 19.5 15 12.1
DRPF/DDPF 1A (AL) or DRSF/DDSF 1A (AL) DRPF/DDPF 2A (AL) or DRSF/DDSF 2A (AL) DRPF/DDPF 3A (AL) or DRSF/DDSF 3A (AL) DRPF/DDPF 4A (AL) or DRSF/DDSF 4A (AL) DRPF/DDPF 5A (AL) or DRSF/DDSF 5A (AL) DRPF/DDPF 6A (AL) or DRSF/DDSF 6A (AL) DRPF/DDPF 7A (AL) or DRSF/DDSF 7A (AL) DRPF/DDPF 8A (AL) or DRSF/DDSF 8A (AL) DRPF/DDPF 8/4A (AL) or DRSF/DDSF 8/4A (AL) DRPF/DDPF 8/6A (AL) or DRSF/DDSF 8/6A (AL)
Sound power levels are non-ducted, measured at mid point on the fan characteristic. The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note (enhanced motor noise) can occur particularly if the fan is operating at speeds well below maximum. For noise sensitive applications FWL recommend using an auto transformer speed controller. Wiring diagrams can be found on pages 91 - 92.
83
FANS
Product Code DDSF1.A(AL) DDSF2.A(AL) DDSF3.A(AL) DDSF4.A(AL) DDSF5.A(AL) DDSF6.A(AL) DDSF7.A(AL) DDSF 8A (AL) DDSF 8/4A (AL) DDSF 8/6A (AL)
Dimensions A 340 470 490 580 620 620 620 800 800 800 B 452 525 600 700 800 800 800 1000 1000 1000 C 210 260 330 390 440 440 440 575 575 575 D 175 225 230 350 400 450 450 700 700 700 E 100 150 150 200 325 350 350 400 400 400
Product Code DDPF1A(AL) DDPF2A(AL) DDPF3A(AL) DDPF4A(AL) DDPF5A(AL) DDPF6A(AL) DDPF7A(AL) DDPF8A (AL) DDPF8/4A (AL) DDPF8/4A (AL)
Dimensions A 530 740 740 900 1000 1000 1000 1375 1375 1375 B 450 525 600 700 800 800 800 1150 1150 1150 C 260 310 380 440 490 490 490 625 625 625 D 175 250 250 350 400 450 450 700 700 700 E 100 150 150 200 325 350 350 400 400 400
Mounting Brackets and Flexible Connectors are available as optional extras, please contact Flkt Woods for a quotation. Wiring diagrams references can be found on pages 91 - 92.
FANS
Dimensions Product Code DRSF1A (AL) DRSF2A (AL) DRSF3A (AL) DRSF4A (AL) A 340 470 490 580 620 620 620 800 800 800 B 500 700 700 800 950 1050 1050 1150 1150 1150 C 250 340 390 450 550 550 550 625 625 625 D 150 225 250 300 400 400 400 600 600 600 E 100 150 150 200 300 300 300 400 400 400 F 150 150 150 150 155 155 155 150 150 150 G 330 460 480 570 610 610 610 1150 1150 1150 Unit (AL) Weight kg 17 22 25 40 58 70 70 92 83 83
Upstand Dimensions Width External 320 450 470 560 600 600 600 780 780 780 Internal 270 400 420 510 550 550 550 680 680 680 Length External 310 440 460 550 590 590 590 1130 1130 1130 Internal 260 390 410 500 540 540 540 1030 1030 1030
DRSF5A (AL) DRSF6A (AL) DRSF7A (AL) DRSF8A (AL) DRSF8/4A (AL) DRSF8/6A (AL)
Dimension Product Code DRPF 1A (AL) DRPF 2A (AL) DRPF 3A (AL) DRPF 4A (AL) DRPF 5A (AL) DRPF 6A (AL) DRPF 7A (AL) DRPF 8A (AL) DRPF 8/4A (AL) DRPF 8/6A (AL) A 670 750 750 850 1000 1050 1050 1100 1100 1100 B 500 700 700 800 950 1050 1050 1100 1100 1100 C 250 340 390 450 550 550 550 600 600 600 D 150 225 250 300 500 600 600 700 700 700 E 100 150 150 200 250 300 300 350 350 350 Unit (AL) Weight kg 17 22 25 40 58 70 70 122 110 110
Upstand Dimensions Width External 650 730 730 830 980 1030 1030 1080 1080 1080 Internal 500 580 580 630 780 830 830 880 880 880 Length External 480 680 680 780 930 1030 1030 1080 1080 1080 Internal 330 530 530 580 730 830 830 880 880 880
Mounting Brackets and Flexible Connectors are available as optional extras, please contact Flkt Woods for a quotation. Wiring diagrams references can be found on pages 91 - 92.
85
FANS
Average dBA ratings measured hemispherically under free field conditions at 3m from the unit. Lw is the sound power level in dB Ref. 1pW
Motor selection, kW, take motor rating value on nearest broken line to the right of air duty point.
Example:
Duty required - 3.5 m3/sec at 400 Pa - Duct Mounted Unit Selections - BDPF-10A, 900 rev/min, 0.55kW Unit Code - BDPF-10AL/900/0.55 (acoustically lined)
FANS
Average dBA ratings measured hemispherically under free field conditions at 3m from the unit. Lw is the sound power level in dB Ref. 1pW
Motor selection, kW, take motor rating value on nearest broken line to the right of air duty point.
Example:
Duty required - 3.5 m3/sec at 400 Pa - Duct Mounted Unit Selections - BDPF-10A, 900 rev/min, 0.55kW Unit Code - BDPF-10AL/900/0.55 (acoustically lined)
87
FANS
Lw 78 82 85 88 91 93 95
dBA 49 54 59 61 65 68 69
FANS
1380 1380 1400 1400 1400 1400 1420 1420 1440 1440 1440 1460 1460
Product Code BDSF6A (AL) BDSF7A (AL) BDSF8A (AL) BDSF9A (AL) BDSF10A (AL) BDSF11 (AL) BDSF12A (AL)
Dimensions A 550 675 835 1035 1200 1200 1200 B 1000 1175 1450 1500 2000 2000 2000 C 480 590 675 765 1100 1100 1100 D 500 625 785 985 1100 1100 1100 E 325 370 460 460 800 800 800
Product Code BDPF6A (AL) BDPF7A (AL) BDPF8A (AL) BDPF9A (AL) BDPF10A (AL) BDPF11A (AL) BDPF12A (AL)
Dimensions A 850 1100 1250 1500 2100 2100 2100 B 1000 1175 1450 1500 2000 2000 2000 C 480 540 675 765 1100 1100 1100 D 650 762 900 1000 1500 1500 1500 E 250 305 400 457 600 600 600
Unit (AL) Weight kg 128 155 200 264 505 525 590
Mounting Brackets and Flexible Connectors are available as optional extras, please contact Flkt Woods for a quotation.
89
FANS
Dimensions Product Code BRSF6A(AL) BRSF7A(AL) BRSF8A(AL) BRSF9A(AL) BRSF10A(AL) BRSF11A(AL) BRSF12A(AL) A 550 675 835 1035 1300 1300 1300 B 1100 1175 1450 1550 2100 2100 2100 C 525 625 725 825 1100 1100 1100 D 300 430 590 790 1050 1050 1050 E 415 540 610 670 900 900 900 F 150 150 150 150 150 150 150 G 1100 1120 1450 1550 2100 2100 2100 Weight Unit (AL) 60 80 105 125 220 230 260
Upstand Dimensions Width External 530 655 815 1015 1280 1280 1280 Internal 380 505 665 865 1080 1080 1080 Length External 1080 1100 1430 1530 2080 2080 2080 Internal 930
Dimensions Product Code BRPF-6A (AL) BRPF-7A (AL) BRPF-8A (AL) BRPF-9A (AL) BRPF10A (AL) BRPF11A (AL) BRPF12A (AL) A 900 1150 1450 1550 2100 2100 2100 B 1100 1175 1450 1550 2100 2100 2100 C 500 600 700 800 1100 1100 1100 D 500 762 900 1000 1500 1500 1500 E 250 305 400 450 800 800 800 Weight Unit (AL) 103 131 195 227 430 450 510
Upstand Dimensions Width External 880 1130 1430 1530 2080 2080 2080 Internal 730 930 1230 1330 1880 1880 1880 Length External 1080 1155 1430 1530 2080 2080 2080 Internal 930 955 1230 1330 1830 1830 1830
All dimensions shown in mm Mounting Brackets and Flexible Connectors are available as optional extras, please contact Flkt Woods for a quotation.
950
FANS
Wiring Diagrams
CD2430
N 4 3 2 1 L E Changeover Panel Single Phase Supply Parallel Fan Unit Isolators when fitted UZ U Z N L E UZ U Z N L E
Fan 1
Fan 2
UZ
UZ
Fan 1
91
FANS
Wiring Diagrams
Single Fan Unit
Three Phase
Three Phase Auto-Changeover Panel (Airflow)
ACRD3
12 Amps maximum Changeover via airflow switches within twin fan unit 12 hour duty share Remote enable Common fail volt free contacts TERMINALS FOR Fan Run, fail indicator lamps BMS CONNECTION
L1
L2
L3
F1 F2
VOLT FREE CONTACTS FOR COMMON FAIL INDICATION
S1 S2
VOLT FREE CONTACTS REMOTE STOP START (SUPPLIED LINKED)
SEE DRG No. ACR3/ACRD3 FOR MAINS SUPPLY AND FAN CONNECTIONS
93
FANS
Energy Recovery Unit 6 models in range Volume flow up to 1.00 m3/s Thermal Efficiency up to 70% Side-by-side deck format
SIZES Sizes 1 to 6 available APPLICATION Medium efficiency, high performance self regulating ventilation and energy recovery for office and industrial applications. Thermal efficiency up to 70% (EN308), in compliance with ErP 2009/125/EC directive Air filtration and temperature control included Compact, plug n play units complete with integrated BMS communications. RANGE Available in 6 models, the e3co Star range covers flow rates from 300 to 3600m3/h (0.08 to 1.00m3/s). e3co Star range is available in 3 variants: ERU with plate heat exchanger and filters fitted ERU with plate heat exchanger, fitters and post heated fitted (water or electric) ERU with plate heat exchanger, fitters and post heated plus pre heater (electric). ELECTRICAL SUPPLY 220 - 240V / 50Hz / 1 Ph FAN AND MOTORS Complete with direct driven centrifugal fans; single or double inlet with forward curved impeller blades. Direct driven via EC (Electronically Commutated) motors with high-performance, thermal protection and built in speed control. EC technology is an ecological solution guaranteeing low energy consumption and better management and control of the operating point (air flows can be controlled from 30 to 100%). CONTROLS User friendly interface - colour touch screen Fast and easy commissioning - saving time on site Pre-configured controls; Variable Air Volume, Constant Air Volume and Constant Pressure options Plug and play solution Full BMS capability as standard, using an open table version of the MODBUS protocol - easy to integrate controls HEAT EXCHANGER Medium efficiency cross-flow heat exchanger core with aluminium plates is EUROVENT certified. Efficiency up to than 70% (EN 308) under typical operating conditions as stated below: Fresh air: -5C/90% RH Return air 20C/50% RH Automatic defrost function is included to protect the heat exchanger core from the risk of freezing. An optional electric pre-heater (frost heater) is also available as part of frost protection strategy.
Filters are included to provide protection to other components (i.e. exchanger/fans). Media is mounted within runners for easy fitting/removal. The e3co Star unit is equipped with G4 grade filter media fitted to the fresh air intake and return air intake. F7 and F9 grade filter media can be fitted if desired and are available as optional accessories BENEFITS AND FEATURES Integrated ventilation control can be accessed via our HMI (display panel), which uses touch screen technology, BMS communication uses a MODBUS protocol is via an RS485 port. Alternatively, the built-in Ethernet port can be used. 100% bypass via integral damper is fitted with servomotors controlled automatically by built-in controls which can provide FREE-COOLING and NIGHT-COOLING functions. Wide choice of airflow control scenarios are available to optimise energy consumption. Temperature probes are included to monitor supply air, exhaust air and external temperature. An integrated de-icing sensor is included to protect the hot water coil (where heater is fitted). Electric heaters are complete with a manual reset safety thermostat to protect the electric heater elements. Programmable scheduler function is included to allow users to customise their own operating schedule. Weekly, date period or single date schedule options are available. ressure switches are used within the control of air flows P for each fan, and provide fan fail alarms, both locally (on the HMI) and to the BMS. INSTALLATION Side-by-Side format - designed to be compact. Low profile - suitable for mounting in ceiling voids. Indoor or outdoor (when weather roof and weather cowls accessories fitted). ACCESSORIES Full range available, including filter media upgrade, flexible connectors, silencers, mounting feet, HMI extension cables, 3-port valuve and atcuator, optional pre-heater, PIR occupancy sensor and inlet damper and actuator. For further information please enquire.
FILTERS
FANS
Performance Data
400
350
300
250
200
150
100
50
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
Note: Performance data is shown at maximum running speed for each unit size.
Technical Data
Size 1 Fan Data Max Installed Power: Watts input Nominal Running speed: rpm Fan Motor FLC: amps (note 1) Fan Motor IP rating Motor Insulation class Unit Data Max Running temperature: C Min Running temperature: C (note 2) Electrical Supply: V/Ph/Hz (note 3) Electrical Supply: V/Ph/Hz (note 4) Thermal Recovery Performance Recovered Thermal Power: kW (note 5) Air off temperature: C Condensate rate: l/h Filters Supply / Exhaust Air Filter class (note 6) G4 G4 G4 G4 G4 G4 2.5 9.9 0.5 3.6 10.0 0.8 6.1 8.2 0.9 7.1 8.3 1.1 11.0 9.3 2.1 16.0 9.4 3.1 +40 -10 230/1/50 230/1/50 +40 -10 230/1/50 415/3/50 +40 -10 230/1/50 415/3/50 +40 -10 230/1/50 415/3/50 +40 -10 230/1/50 415/3/50 +40 -10 415/3/50 415/3/50 175 x2 2150 1.3 x 2 44 B 171 x2 1740 1.3 x 2 44 B 465 x2 1640 3.0 x 2 54 B 450 x2 1085 2.8 x 2 54 B 750 x2 1030 3.4 x 2 54 B 1000 x2 880 1.7 x 2 54 B Size 2 Size 3 Size 4 Size 5 Size 6
95
FANS
Note 7: Nominal Power based on nominal airflow per unit Note 8: Stated Unit Max current rating includes Fan FLC and Electric Post-Heater rating Note 9: Heater off temperature is based on air entering the pre-heater at -10C at nominal airflow Air pressure loss for Pre-Heater is between 2 and 5 Pa
Stated Unit Max current rating includes Fan FLC, but excludes the Electric Pre-Heater rating Heater on temperature is based air off temperature of Plate Heat Exchanger at nominal airflow Heater off temperatures are stated at nominal airflow Air pressure loss for Pre-Heater is between 2 and 5 Pa
Heater off temperature is based on following conditions: nominal air on value of 7C ; Nominal airflow Values refer to the following conditions: Water Flow and Return temperatures of 82/71C; Nominal Airflow
Heater off temperature is based on following conditions: nominal air on value of 7C ; Nominal airflow Values refer to the following conditions: Water Flow and Return temperatures of 45/35C; Nominal airflow
Actuator Motors used within all Electro Valve Kits are suitable for an electrical supply AC 24 V Motors are designed to be controlled via a DC 010 V signal to provide proportional control. All actuator motors include an Actuator Return Spring
FANS
SFP
63 Hz
125 Hz
250 Hz
500 Hz
1 KHz
2 KHz
4 KHz
8 KHz
Total LwA
Size 1 Boost 75% 60% 45% Max 75% 60% 45% Min 42 42 36 32 28 54 53 46 37 33 50 48 42 33 29 46 43 38 34 29 42 41 37 31 24 43 40 33 28 <20 37 34 28 <20 <20 20 <20 <20 <20 <20 57 55 49 41 37 29 27 21 <20 <20 0.88 0.79 0.55 0.37 0.27 58% 78% 91% 97% 199 270 313 335
Trickle Size 2 Boost 75% 60% 45% Trickle Size 3 Boost 75% 60% 45% Trickle Size 4 Boost 75% 60% 45% Trickle Size 5 Boost 75% 60% 45% Trickle Size 6 Boost 75% 60% 45% Trickle
39 35 29 28 27
48 43 38 31 24
50 44 38 30 22
43 37 31 24 <20
41 36 31 23 <20
43 37 31 23 <20
37 30 23 <20 <20
54 48 43 35 30
42 43 37 31 25
47 43 38 29 33
40 36 30 27 28
36 34 29 26 <20
42 41 35 29 <20
40 38 31 24 <20
34 32 24 <20 <20
50 48 42 36 35
30 28 22 <20 <20
44 41 39 31 29
45 40 35 27 25
40 35 30 23 22
43 39 36 32 20
46 42 37 31 <20
43 38 34 25 <20
34 28 23 <20 <20
52 47 44 37 31
45 41 38 28 31
47 42 43 30 28
40 34 34 25 23
42 39 36 32 23
49 44 40 33 22
43 36 31 24 <20
53 48 46 38 34
29 25 25 <20 <20
55 52 48 40 32
52 46 41 32 25
42 36 31 25 <20
48 43 39 33 25
48 43 38 33 21
45 39 34 <20 <20
34 27 21 <20 <20
58 54 50 42 34
33 28 23 21 <20
Configurations
Right Hand (SS-R) (Access Side) Left Hand (SS-L)
RA
FA
SA
EA
SA
EA
RA (Access Side)
FA
FA = Fresh Air
EA = Exhaust Air
RA = Return Air
SA = Supply Air
97
FANS
21 DN 15
E D M N
32 50 S
20
Size 1 2
A 170 237.5
B 310 425
C 180 215
D 677 728
E 140 200
F 32.4 42.4
H 380 400
J 1128 928
K 550 800
L 1100 1200
M 684 734
N 855 905
P 68 68
Q 69 103
S 200 250
W 650 900
Weight Kg 67 92
12
G L
G F
DN 25
21
58
E D M N
50 138 S
20
Size 3 4 5 6
33
58
H
Q 45 P C H
FANS
Silencer Information
Dia (mm) 200 200 200 250 250 250 315 315 315 400 400 500 500 Length (mm) 600 900 1200 600 900 1200 600 900 1200 900 1200 900 1200 Size-length Code bbb-ccc BDER-30-020-060 BDER-30-020-090 BDER-30-020-120 BDER-30-025-060 BDER-30-025-090 BDER-30-025-120 BDER-30-031-060 BDER-30-031-090 BDER-30-031-120 BDER-30-040-090 BDER-30-040-120 BDER-30-050-090 BDER-30-050-120 Silencer # mm 300 300 300 355 355 355 415 415 415 500 500 630 630 Attenuation, dB 63Hz -1 -2 -3 0 -2 -2 0 -1 -2 -1 -2 -1 -1 125Hz -3 -3 -5 -2 -2 -4 -2 -2 -4 -2 -4 -1 -3 250Hz -7 -9 -14 -7 -8 -11 -7 -7 -10 -6 -8 -5 -7 500Hz -14 -24 -30 -12 -19 -25 -10 -16 -22 -13 -18 -11 -16 1KHz -20 -30 -37 -18 -25 -30 -15 -22 -28 -19 -25 -14 -20 2KHz -26 -36 -46 -23 -32 -39 -20 -24 -30 -16 -20 -12 -15 4KHz -15 -20 -25 -10 -12 -14 -7 -10 -12 -8 -10 -9 -10 8KHz -7 -9 -12 -5 -6 -10 -4 -6 -9 -6 -8 -6 -7
Ordering key
Sound absorbers BDER-30-bbb-ccc
bbb
ccc
1 - Medium Thermal Efficiency unit (up to 70%) - c omplete with automatic control and Cross Flow Plate Heat Exchanger 2-U nit Model Code Examples: 1 5 Unit size = 1 (0.12 m3/s) Unit size = 5 (0.65 m3/s) e3co-Star 1 e3co-Star 5
3-U nit Configuration Options: SS-R Side-by-Side format (access and controls on right side) SS-L Side-by-Side format (access and controls on left side) 4-U nit Version Options: 5 - Controls: e3ssential Unit with NO coils fitted e3nhanced HW Hot water coil (POST Heater) plus appropriate controls fitted e3nhanced HE Electric heater (POST Heater) plus appropriate controls fitted e3lite HW Unit with Electric PRE-Heater and hot water POST Heater plus controls e3lite HE Unit with Electric PRE-Heater and Electric POST heater plus controls VAV VAV CAV COP AQ Variable Air Volume - Trickle and Boost Variable Air Volume - + Air Quality (CO2) Sensor Constant Air Volume Constant Pressure
99
FANS
200mm - 760mm diameter Volume flow up to 9.2 m /s
3
Static pressures up to 1000 Pa F our fan types allowing versatility of performance Rugged fibre glass construction casings Completely assembled units
SIZES DSM: 200, 250, 330, 400, 500, 630 and 760 diameter DSC: 200, 250, 330, 400, 500 and 630mm diameter. Larger sizes are available please enquire for further details DSJ Cowls are also available for use with our JMfans. These are available to suit the following sizes: 315, 400, 450 and 500mm diameter FAN PERFORMANCE Wide performance ranges are obtained by using 3 impeller designs to suit all types of applications. DPI units for input, volume flow is reduced by 10% compared with corresponding DSP figures and are supplied without anti-backdraught shutters. IMPELLERS DSP/DPI: Impeller is as used in 2101GP fan. Product often used in low pressure applications DSM/DSC: For higher pressure development, purpose designed mixed flow (DSM) and centrifugal (DSC) impellers are available DSJ: Roof unit available with JM Aerofoil impeller. Please contact your local SuperLite distributor for further details MOTORS All motors are totally enclosed and are rated to class F. Most motors are suitable for inverter speed control down to 20% of full speed and are IE2 where within scope. ELECTRICAL SUPPLY 220 - 240V / 50Hz / 1 Ph 380 - 420V / 50Hz / 3 Ph TEMPERATURE RANGE -40C to 50C without shutters -20C to 50C with shutters (All motors are not suitable for starting at temperatures lower than -20C)
CASINGS The cowls are manufactured from cold pressed fibre glass which offers long life in the severest weather conditions. The colouring contains an ultra violet stabiliser which ensures the cowls will not fade due to sunlight. Standard colourant: BS 5252 10 A05 (Goosewing Grey). The units are fully assembled, and leave our works in sturdy packaging. This allows quick and easy installation on site. Three methods of mounting, curb for a flat roof, purlin for a sloping roof or wall mounting (by using a Flkt Woods adaptor). Suitable for mounting up to 30 from horizontal. ACCESSORIES Bird guards, soaker sheets, inlet guards, purlin boxes, acoustic curbs, local isolators, electronic and transformer type speed controllers and frequency inverters. For a full range of accessories please see pages 109 - 112.
FANS
Performance Data
m3/s at Pa (Static) 0 0.22 0.53 1.05 1.8 4.1 4.55 9.2 50 0.1 0.4 0.9 1.65 4.0 4.23 8.9 0.22 0.67 1.45 3.78 3.7 8.3 0.4 1.2 3.55 3.15 7.6 0.22 1.05 3.37 2.74 7.2 0.6 2.9 1.76 6.1 2.4 0.62 4.95 2.45 1.1 125 200 250 375 500 750
Electrical Data
220-240V/50Hz/1 Ph Product Code Speed rev/min Motor Product Number WE162163 DE182163 DE232163 DE242164 WE272164 Motor Rating (kW) 0.055 0.095 0.21 0.52 2.3 Full Load Current (at 230V) (A) 0.4 0.8 1.9 3.9 12.3 Starting Current (at 230V) (A) 0.8 1.3 2.3 7.8 48 Wiring Diagram Ref CD2405 CD2405 CD2405 CD2405 CD2405 Speed Controller Electronic N/A ME1.1 ME1.3 ME1.6 N/A Transformer N/A MT1.1.5 MT1.5 MT1.5 MT1.12 Sound Levels dBA 45 51 56 61 71
380-420V/50Hz/3 Ph Product Code Speed rev/min Motor Product Number WE162362 WE182362 WE232363 WE242364 EW272364 EW303362 EW323365 Motor Rating (kW) 0.040 0.13 0.29 0.53 2.64 1.8 6.6 Full Load Current (at 400V) (A) 0.2 0.5 1.0 1.8 5.49 4.23 14.7 Starting Current (at 400V) (A) 0.6 1.1 3.0 4.9 30.82 18.55 81.92 Wiring Diagram Ref CD2408 CD2408 CD2407 CD2408 CD2416 CD2416 CD2417 Speed Controller Transformer N/A MT3.1 MT3.1 MT3.2 N/A N/A N/A Inverter FWX1 FWX1 FWX1 FWX1 FWX4 FWX4 FWX6 Sound Levels dBA 45 51 56 61 71 66 75
101
FANS
Performance Data
m3/s at Pa (Static) 0 0.32 0.66 1.3 2.5 5.1 6.6 50 0.22 0.55 1.19 2.4 5 6.3 125 0.053 0.38 1 2.2 4.7 5.9 0.15 0.8 2 4.5 5.5 0.65 1.85 4.3 5.2 1 3.5 3.3 2.5 200 250 500 750
Sound pressure levels quoted are average dBA at 3m distance over a sphere, under free field conditions and are presented for comparative purposes only.
Electrical Data
220-240V/50Hz/1 Ph Product Code Speed rev/min Motor Product Number WL162163 DL182163 DL232163 DL242163 Motor Rating (kW) 0.055 0.16 0.45 1.2 Full Load Current (at 230V) (A) 0.4 1.1 4.2 7.8 Starting Current (at 230V) (A) 0.8 2.2 6 18.7 Wiring Diagram Ref CD2405 CD2405 CD2405 CD2405 Speed Controller Electronic N/A ME1.3 ME1.6 ME1.12 Transformer N/A MT1.5 MT1.5 MT1.8 Sound Levels dBA 48 54 60 66
380-420V/50Hz/3 Ph Product Code Speed rev/min Motor Product Number WL162362 WL182363 WL232364 LW242363 LW272364 LW303365 Motor Rating (kW) 0.040 0.18 0.54 1.27 4.8 4.8 Full Load Current (at 400V) (A) 0.2 0.7 1.8 2.66 9.69 10.9 Starting Current (at 400V) (A) 0.6 1.8 4.9 14.63 49.53 56.76 Wiring Diagram Ref CD2416 CD2408 CD2410 CD2416 CD2417 CD2417 Speed Controller Transformer N/A MT3.1 MT3.2 N/A N/A N/A Inverter FWX1 FWX1 FWX1 FWX2 FWX4 FWX5 Sound Levels dBA 48 54 60 66 72 70
The fan noise levels shown are for the specified operating point. When an electronic controller is incorporated, a magnetic note (enhanced motor noise) can occur particularly if the fan is operating at speeds well below maximum. For noise sensitive applications FWL recommend using an auto transformer speed controller. For larger sizes please enquire. Wiring diagrams can be found on pages 104 - 107. Bold text denotes, next day delivery available if ordered by 4pm.
FANS
Product Code DSM200 DSM250 DSM330 DSM400 DSM500 DSM500 DSM630 DSM760
DSM Motor BT4 BT4 BT5/BT9 CT5 F22 100L 100L 132 A 450 525 600 700 900 900 1050 1250 B 480 600 710 820 1030 1030 1300 1700 C 280 310 355 400 475 475 550 710 D 250 325 400 500 700 700 800 1000 Weight (kg) 16 20 26 33 64 69 86 129
DSC Motor BT4 BT5 CT5 CT9 80 112M 132M A 450 525 600 700 700 900 1050 B 480 600 710 820 820 1030 1300 C 280 310 355 400 400 475 550 D 250 325 400 500 500 700 800 Weight (kg) 17 22 28 35 40 73 109
103
FANS
Wiring Diagrams
CD2405 Fan
FANS
Wiring Diagrams
CD2407 Fan
FANS
Wiring Diagrams
CD2408 Fan
STAR (V>340)
FAN E U1 V1 W1 U2 W2 V2
U1 V1 W1 U2 W2 V2
L1 L2 L3
TK TK
L1 L2 L3
TK TK
L1 L2 L3
L1 L2 L3
NOTE: CONNECT FAN'S THERMOSTATACROSS CONTROLLERS TK TERMINALS. IF FAN HAS NO THERMOSTAT CONNECT LINK ACROSS TK'S AS SHOWN.
FANS
Wiring Diagrams
CD2410 Fan
U1 V1 W1 V2 U2 W2
U
High Speed
(L1)
(L2)
W
(L3)
U1 V1 W1 V2 U2 W2
U V W
(L3)
Low Speed
(L1)
(L2)
CD2416
Overheat Protection
Star
U1 V1 W1 U2 W2 V2
S S = Thermistors K K = Thermostat
U
CD2417
(L1)
(L2)
W
(L3)
U1 V1 W1 V2 U2 W2
Normal Delta
(L1)
(L2)
W
(L3)
S S = Thermistors K K = Thermostat
H H = Heaters
107
FANS
Introduction Flkt Woods Wall Units represent another part of the flexibility and family concept of the Colchester Roof Unit Range. The DSP, DSM, DSC units are readily converted to the wall mounted WDP, WDM, WDC by means of a wall adaptor and louvre shutters. Performance Data may be taken from page 81 (DSP), 82 (DSM), and 83 (DSC). The adaptor has been load tested to ensure a generous structural factor of safety enabling it to withstand all normally encountered weather conditions. The wall unit is secured to the adaptor by stainless steel screws. Specification Wall Adaptor The adaptor is moulded in ultra violet stabilised polyester resin, glass reinforced, rendered fire retardant to BS.476: Part 7. Colourant to BS.4800:08B-21 is built in. Shutters An attractive unit with rigid PVC vanes and aluminium frame. Operated by fan pressure, shutters are enclosed when fan stops. These replace the roof unit shutters. Fan performance loss is small but varies with fan type, size and duty pressure. Shutters should only be used with the two higher fan speeds in each size.
Performance Data
Wall Unit WDP WDM WDC Max. Volume m3/s 1.65 1.8 2.5 Max. Static Pressure Pa 140 400 500
Fan Size
WDP 250, WDM 200, WDC 200 WDP315/355, WDM 250,WDC 250 WDP 400, WDM 330, WDC 330 WDP 450/500, WDM 400, WDC 400
45 22 18 0
FANS
WAC10
WAC11
WAC12
WAC14
DVP 355
DVP 400
DVP630
Dim
708 500 420 420 708 330 50 658 378 480 150 250 75 500 75 984 575 260 18kg 25kg
813
918
888
993
943
1073
1053
1208
1228
1428
1478
1648
813
875 405 55
918
888
953 435 85
993
943
1023 446 96
1073
1053
1143 480 60
1208
1228
1348 580 90
1428
1478
1648
820 470 600 20 325 75 600 75 784 675 320 25kg 33kg
868 518 710 250 400 75 600 75 784 675 320 31kg 38kg
927 577 920 350 500 75 700 75 884 775 360 37kg 37kg
1083 663 1030 550 700 75 900 100 1140 1000 450 55kg 70kg
1258 768 1260 650 800 100 1200 100 1440 1300 800 74kg 100kg
1448 888 1560 850 1000 100 1500 100 1740 1600 980 109kg 147kg
109
FANS
Anti-backdraught Shutters Shutters are of aluminium and are an optional extra. Synthetic rubber buffers are provided to ensure quiet operation. Use of shutters does not reduce fan unit performance, but will improve weathering under extreme conditions. Inlet Guard A flat square wire guard can be supplied to close off the opening in a ceiling slab. See unit drawing. Fixings not supplied. Bird Guards Guards can be provided to prevent entry of birds via air discharge openings. Fixings supplied. Burglar Bars Robustly manufactured in steel, with double row of steel bars for extra security. Motorised Dampers To meet requirements where heat loss is critical - motorised dampers mount into the ceiling opening. Manufactured in aluminium with opposed multi-leaf blades, supplied complete with motor. Prefabricated Metal Upstand Where it is not convenient to form a timber or concrete upstand, Flkt Woods can provide a preformed pre-galvanised steel curb.
FANS
Other Units Roof Extract Units High Temperature Units Fan Type - DVA
Vertical discharge 4 unit sizes up to 500mm to 1000mm Volume flow up to 10m3/s Air pressure up to 500 Pa available Incorporating Flkt Woods H.T. Aerofoil Fans
Three alternatives Part assembled for easy installation For flat or pitched roof Fresh air input Recirculation for heat recovery Filtration Heating Adjustable air distribution
Mixed flow roof input unit Suitable for curb or purlin mounting Basic fan details as DSM unit (less shutters) Available in 3 sizes, 500, 700 and 1000mm only
111
FANS
Accessories
Speed Controller - Electronic
B 83 87 87 180
C 55 62 62 81
D 40 47 47 65
7.7 12.8
Inverter
Type FWX1 FWX2 FWX3 FWX4 FWX5 FWX6 FWD7 FWD8 FWD9 Product Number 430412 430413 430414 430415 430416 430417 416522 416523 416524 A 420 420 420 420 420 420 480 480 480 B 242 242 242 242 242 242 242 242 242 C 195 195 195 195 195 195 260 260 260 Weight (kg) 14.2 14.2 14.2 14.2 14.2 14.2 23 23 23
15.6
CASED FANS
FANS
315mm to 630mm diameter Volume flow up to 2.85 m3/s Static pressures up to 105 Pa Horizontal discharge Installation class F High efficiency axial impellers
SIZE 315, 355, 400, 450, 500, 560 and 630 ELECTRICAL SUPPLY 315mm to 630mm: 230V / 50Hz / 1 Ph 710mm to 1000mm: 400V / 50Hz / 3 Ph FEATURES AND CONSTRUCTION The roof units are used for ventilation of department stores, supermarkets, factories, swimming pools, kitchens, dining halls, warehouses, garages, farms and stables. The fans are suitable for mounting on a flat or tilted roof of up to 30 degrees. The units have a horizontal discharge for less polluted air. The weather cowls are made from UV stabilised glass reinforced polyester to ensure a rigid, lightweight and corrosion free, weather resistant unit. The high efficiency axial fans have aerodynamically profiled blades made of metal. Blades are mounted directly to the rotor of the external rotor motor. All motors have voltage controllable external rotor motors protection class IP54 with protection against humidity, thermal contact embedded in the windings. ELECTRICAL CONNECTION An IP44 Terminal Box is attached to the back of the motor. Customer connection is made at this Terminal Box. ACCESSORIES A full range of accessories are available including: Electronic speed controllers Soaker sheets Purlin bboxes
CASED FANS
Performance Data
350
300
250
200
150
SLR 500
100
50
Please contact Flkt Woods if you would like to select along the dotted line
0 0 0.5 1
Volume Flow (m3/s)
1.5
2.5
700
600
500
400 SLR 560 SLR 630 SLR710 SLR 800 SLR 1000
300
200
100
0 0 1 2 3 4 5 6 7 8 9
Volume Flow (m3/s)
Please contact Flkt Woods if you would like to select along the dotted line
Electrical Data
220-240V/50Hz/1ph Product Code Speed rev/min Product Number Motor Rating (kW)
0.14 0.22 0.32 0.60 0.67 1.15 2.10
Part Number
DA410289 DA410289 DA410290 DA410290 DA410291 DA410291 DA414855
380-420V/50Hz/3ph
RFSL710 RFSL800 RFSL1000 835 845 680 SL710106 SL800106 SL100108 0.87 1.3 2.05 1.8 2.6 4.4 5.04 7.54 14.96 MT3.7 MT3.7 MT3.7 402013 402013 402013
Bold text denotes next day delivery available if ordered by 4pm. For wiring diagrams please enquire.
115
CASED FANS
Sound Data
Size
315 350 400 450 500 560 630 710 800 1000
Product Number
SL315104 SL350104 SL400104 SL450104 SL500104 SL560104 SL630104 SL710106 SL800106 SL100108
250
64 67 70 67 70 71 72 70 72 71
500
64 67 70 73 70 74 71 72 75 77
1K
64 67 70 73 70 76 71 75 77 78
2K
63 66 69 73 69 75 69 73 76 77
4K
55 58 61 71 61 71 61 70 71 70
8K
69 72 75 57 75 62 76 64 63 61
Total LpA @ 3m
53 56 59 58 59 61 60 59 61 63
Sound power levels are non-ducted, measured at mid point on the fan characteristic. Sound pressure levels quoted are average dBA at 3m A distance over a sphere, under free field conditions and are presented for comparative purposes only.
A
A Sq
E F
A A Sq
Product Number
SL315104 SL350104 SL400104 SL450104 SL500104 SL560104
B Sq C Sq
Product Code
315 350 400 450 500 560 630 710
A
555 675 765 765 995 995 1115 1115 1410 1650
B
330 385 420 495 550 605 690 780 885 1080
C
490 640 740 740 890 890 990 990 1090 1340
D
340 380 460 460 550 550 650 650 750 750
E
90 90 90 90 120 120 120 120 100 80
F
150 150 150 150 150 150 150 150 150 150
Weight (Kg)
15.5 16.5 21 22 34 37 46 56 67 110
F 800
1000
B Sq C Sq
CASED FANS
Size
315 350 400 450 500 560 630
A
555 675 765 765 995 995 1115
B
440 620 720 720 860 860 900
C
510 680 780 780 900 900 950
D
340 380 460 460 550 550 650
E
90 90 90 90 120 120 120
F
225 240 240 240 250 250 260
A
A Sq
B Sq C Sq
Size
315 350 400 450 500 560 630
A
350 400 510 510 620 620 780
B
220 240 240 240 250 250 260
C
445 625 730 730 865 865 900
D
515 680 780 780 910 910 950
E
615 780 880 880 1050 1050 1080
F
380 435 490 535 615 675 750
G
9 9 9 11 11 11 11
E Sq D Sq C Sq
A Sq G
F
E Sq D Sq C Sq
F
A Sq G F
117
CASED FANS
Controller - Electronic
B 83 87 87 180
C 55 62 62 81
MT1.5 MT3.7
255 425
170 300
140 235
155 255
194 355
All dimensions shown in mm Bold text denotes, next day delivery available if ordered by 4pm.
Once completed please return to your SuperLite Distributor who will be happy to provide you with a selection and quote by return. A = Profile cover width (centre to centre of outside crowns) .................................. B = Depth of corrugations ............................................................................... C = Pitch (centre to centre of crowns) .............................................................. D = Pan width ............................................................................................... E = Crown width ............................................................................................. F = Base flute width ........................................................................................ Total number of crowns per sheet .................................................................... Colour .......................................................................................................... Additional comments ......................................................................................
Note: Profile suggestions are made in good faith based upon information provided. Final acceptance of any suggested profile must always remain the responsibility of the customer. All information or details are intended as a guide only. No responsibility whatsoever will be accepted for any mis-identified or unsuitable profiles following acceptance of a suggested profile. Soaker sheets are made to order and are therefore non refundable.
Please enter dimensions measured as accurately as possible in mm, 4 profiles shown for illustration, sheets may be wider.
CASED FANS
500
400
Extract Input
300
200
100
Extract Input
250
200
Extract Input
150
100
50
0 0 1 2 3 4 5
119
CASED FANS
Extract Input
Size 800
200
150
Extract Input
100
50
0 0 1 2 3 4 5 6 7 8
70
Extract Input
60
50
40
30
20
10
0 0 1 2 3 4 5 6 7 8 9
CONTENTS Page
Supply Valve - KE Exhaust Valve - KK Exhaust Valve - VEF-S IRIS Damper Exhaust Fire Valve - KSOP Fire Damper - ETPR-E-1 Fire Damper - ETPR-17 121-125 126-129 130-133 134-139 140-142 143-147 148-150
121
CONSTRUCTION The KE is manufactured from steel sheet painted white. Other paint finishes are available to special order. Stainless steel version is also available and it is always delivered with a stainless steel version of mounting ring (KKR). Valve body has a gasket made of cellular plastic and the control disc with screw spindle enables easy regulation and positional locking. Mounting rings KKT and KKL are manufactured from galvanized steel sheet. KKT is equipped with rubber sealing gasket. KKR is manufactured of stainless steel. INSTALLATION Mounting ring KKT, KKL or KKR is fitted into the duct with screws or rivets. The valve is fixed by a screwing action to locate the valve lugs into indents in the mounting ring. The valve can also be fitted with springs (model KEJ) and the mounting ring is not needed. MEASUREMENT AND REGULATION OF AIR FLOW Regulation of air flow is achieved by turning the control disc to change adjustment dimensions (mm). The measurement of air flow is made by a pressure difference measurement with a separate measuring tube. Refer to separate air flow measurement diagrams for information. GENERAL INFORMATION KE Supply air valve e.g in size 100 with mounting ring KKT-100 manufactured by Flkt Woods PRODUCT CODING Supply air valve KE-aaa Supply air valve with springs KEJ-aaa Size (aaa) 100, 125, 150, 160, 200 Following markings are added to the valve code if needed: E = special colour C = CleanVent coated For example: KE-100-E (KE-100 with special colour) Supply air valve, stainless steel KE-aaa-R Size (aaa) 100, 125, 160 ACCESSORIES Mounting ring with rubber gasket KKT-aaa Mounting ring without rubber gasket KKL-aaa Size (aaa) 100, 125, 150, 160, 200 Mounting ring, stainless steel KKR-aaa Size (aaa) 100, 125, 160
KE-125
KE-125
KE-100
KE-150
KE-150 KE-150
KE-125
KE-160
KE-160
KE-150
KE-200 KE-200
KE-160
KE-200
KE-200
123
250
3 6 5 7 6 2
500
2 4 3 3 3 2
2000
-6 -11 -10 -11 -10 2
4000
-14 -21 -20 -27 -25 2
8000
-30 -37 -34 -34 -34 3
Sound power levels by octave bands are obtained by adding to total sound pressure level Lp10A,dB(A) the corrections Koct presented in the table according to the following formula: L Woct = L p10A + K oct Correction Koct is average value in range of use of KE unit.
B A
Size KE
100 125 150 160 200
Part Number
SL000125 SL000124 SL000123
Weight [g]
170 230 340
Sound Attenuation L
KE Slots (mm)
-3 100 6 10 -7 125 0 15 -5 150 3 15 -5 160 5 10 -3 200 6 12 Tol.
40 46 54 54 64
125
19 16 17 16 16 15 13 13 12 13 12 12 12 12 11 3
250
13 11 11 11 10 9 10 9 8 10 9 8 8 7 6 2
KKT SL000122
SL000121
KKL 340
550
KKT
KKL
3 6 4 3 6 5 5 3
50
50
The average sound attenuation L from duct to room including the end reflection of the connecting duct in ceiling installation, is obtained in the table above.
Size KKT
100 125 150 160 200
Pack Size
56 36 24 25 12
d [mm]
99 124 149 159 199
D [mm]
122 148 175 184 225
Definitions
qv pt Lp10A L Koct air volume total pressure drop sound pressure level with 4 dB room attenuation dB(A) sound power level by octave bands sound attenuation correction l/s Pa (10 m2sab) dB dB dB(A)
Pack Size
56 36 24 25 12
d [mm]
99 124 149 159 199
Lwoct
50
50
Product Facts
Supply air valve intended for installation in the ceiling Manufactured from steel sheet Available also in stainless steel Six sizes
Quick Selection
Valve Size KE-80 KE 100 KE-125 KE-150 KE-160 KE-200 25 dB(A) 14 20 40 59 50 80 3 Air flow range l/s (m /h) at sound level 30 dB(A) 17 (61) 24 (86) 48 (173) 68 (245) 58 (209) 100 (360) 35 dB(A) 20 30 57 80 65 120
125
CONSTRUCTION The KK is manufactured from steel sheet painted white. Other paint finishes are available to special order. Stainless steel version is also available and it is always delivered with a stainless steel version of mounting ring (KKR). Valve body has a gasket made of cellular plastic and the control disc with screw spindle enables easy regulation and positional locking. Mounting rings KKT and KKL are manufactured from galvanized steel sheet. KKT is equipped with rubber sealing gasket. KKR is manufactured from stainless steel. INSTALLATION Mounting ring KKT, KKL or KKR is fitted into the duct with screws or rivets. The valve is fixed by a screwing action to locate the valve lugs into indents in the mounting ring. The valve can also be fitted with springs (model KKJ) and the mounting ring is not needed. REGULATION AND MEASUREMENT OF AIR FLOW Regulation of air flow is achieved by turning the control disc to change adjustment dimensions (mm). The measurement of air flow is made by a pressure difference measurement with a separate measuring tube. Refer to air flow measurement diagrams found in the separate installation and measurement instructions for information. GENERAL INFORMATION Exhaust valve KK, e.g. KK-125 manufactured by Flkt Woods PRODUCT CODE Exhaust valve KK-aaa Exhaust valve with springs KKJ-aaa Size (aaa) 100, 125, 150, 160, 200 Following markings are added to the valve code if needed: E = special colour For example: KK-100-E (KK-100 with special colour) Exhaust valve, stainless steel KK-aaa-R Size (aaa) 100, 125, 160
ACCESSORIES: Mounting ring with rubber gasket KKT-aaa Mounting ring without rubber gasket KKL-aaa Size (aaa) 100, 125, 150, 160, 200 Mounting ring, stainless steel KKR-aaa Size (aaa) 100, 125, 160
KK-80
KK-125
KK-100 KK-125
KK-100 KK-125
KK-100
KK-150
KK-150 KK-160
KK-160
KK-150 KK-160
KK-150
KK-200
KK-200
KK-200
KK-200
127
250
-2 0 -5 -1 1 2
Sound power levels by octave bands are obtained by adding to total sound pressure level Lp10A,dB(A) the corrections Koct presented in the table according to the following formula: L Woct = L p10A + K oct Correction Koct is average value in range of use of KE unit.
B A
Size KK
100 125 150 160 200
Weight [Kg]
0.16 0.23 0.34 0.34 0.51
Sound Attenuation L
KK Slots (mm)
-10 100 0 10 -17 125 0 9 -15 150 0 10 -15 160 -10 0 -15 200 -5 0 Tol.
125
19 16 16 19 16 16 14 13 14 13 13 13 12 11 11 3
250
14 11 11 13 10 9 11 9 9 11 10 9 8 7 7 2
KKT SL000117
SL000116
KKL
8 7 8
KKT
KKL
7 8 7 6 9 8 7 3
50
50
Size KKT
100 125 150 160
The average sound attenuation L from duct to room including the end reflection of the connecting duct in ceiling installation, is obtained in the table above.
Pack Size
56 36 24 25 12
d [mm]
99 124 149 159 199
D [mm]
122 148 175 184 225
Definitions
qv pt Lp10A Lwoct L Koct air volume total pressure drop sound pressure level with 4 dB room attenuation dB(A) sound power level by octave bands sound attenuation correction l/s Pa (10 m2sab) dB dB dB(A)
200
Size KKL
100 125 150 160 200
Pack Size
56 36 24 25 12
d [mm]
99 124 149 159 199
All dimensions shown in mm Bold text denotes next day delivery available if ordered by 4pm.
50
50
14
KK exhaust valve
Product Facts
KK Exhaust valve intended for installation in the ceiling or on a wall Manufactured from steel sheet Available also in stainless steel Six sizes
Quick Selection
Valve Size KK-80 KK-100 KK-125 KK-150 KK-160 KK-200 25 dB(A) 23 30 46 58 64 120 3 Air flow range l/s (m /h) at sound level 30 dB(A) 28(101) 37(133) 57(205) 70(252) 80(288) 140(504) 35 dB(A) 34 45 68 81 98 170
129
GENERAL INFORMATION VEF-S is an exhaust air valve with integrated mounting ring. Valve is always supplied with a clamping ring which makes it suitable also for false ceilings. Correct height of the mounting ring makes it easy to connect a flexible hose. APPLICATION VEF exhaust air valve are circular disc valves with a valve cone of aerodynamic design. This valve possesses excellent characteristics with regard to noise level, pressure drop and air flow capacity. The design of the sound absorbent reduces the risk of cross-talk noise. The device, which is designed for wall-mounting or, alternatively, for ceiling-mounting, is available in four sizes to suit duct connections with a diameter between 100 mm and 160 mm. The design of the valve in conjunction with a Moltopren packing prevents dirtying of the ceiling and walls. MATERIAL The valve is made of polypropylene plastic which is recyclable and withstands temperatures up to 100C. The materials used in the device are also resistant to most chemicals in small concentrations. The device is supplied in white as standard. Certain special colours are available if ordered in large quantities. Galvanized steel sheet mounting rings, with and without rubber seals, are available as an accessory. MAINTENANCE The device can be wiped down with a mild detergent. PRODUCT CODE Exhaust air valve VEF-S manufactured by Flkt Woods with integrated valve branch and clamping ring Exhaust air valve VEF-aa-S incl. integrated mounting ring and clamping ring Size 10, 12, 15, 16
10
5 0 q, m3/h 3 4 10 q, l/s
+9 +15 mm 5 20 2 10 4 6 50 20 100 30
n=0
8 10 15 20 40 35 10030
VEF-16
pt, Pa
20 n=0
pt, Pa
pt, Pa
50 200 40 30 100 20
q, m3/h 20
= 4
50
50 n=2
pt, Pa
20
30
pt, Pa
Performance Data 10
10
200 100 5 +5 +9 +15 mm 0 q, m3/h 5 4 10 50 20 0 q, l/s A1 n=2
VEF-10 VEF-10
8 10 15 20 40
200 ) (A 35 4 6 8 10 B20 25 12 15 d , 0 30 L A1 20 A) B( 25 ,d 0 L A1 20
100
200 100
20 4 6
20
30 100 8 10 12 15
40
50 60 200
pt, Pa
25
,d
A B(
VEF-12
50 200 40 30 100 20
q, m3/h 20 50 n=0 2 4
pt, Pa
pt, Pa
10 = a
. 7
20
30
20 35
pt, Pa
+9 +15 mm
20 35 30 A) B( 25 ,d 0 L A1 200 100 20 6 8 10 12 15
50 40 30 20
10 10
30 50 5 +5 +9 +15 mm 0 A) 25 B( 10 40 5 4 10 20 30 40 , d50 60 0 30 L A1 q, l/s 20 20 .5 7 VEF-12 .5 a= .5 +2 5 2.5 +5 +7 +11 +17.5 mm 0 q, m3/h 10 50 100 5 4 10 20200 30 40 50 60 40 20 50 200 100 q, l/s 200 VEF-15 200 n = 0 2 4 6 8 10 12 15 15 4 6 n=2 8 10 12 20 35 20 VEF-15 VEF-08 100 35 3/h 30 3 q, m /h q, m ) 30 40 50 100 300 8 10 100 20(A 100 B 8 10 200 15 50 25 ) 50 200 200 d n= 6 25 15 20 (A 8 B10 n=0 2 4256 20 , 40 ,d 0 40 VEF-16 0 45 30 L A1 L A1 20 20 40 100 100 35 3/h q, 35 20 .5 m ) 7 40 100 200 30 300 100 (A 30 = 50 5 25 . a dB 5 . 200 2 , 50 50 7 A) + n=6 15 20 5 2.5 0 +5 + +11 +17.5 mm 8 10 10 20 B( 20 15L A25 40 10 40 , d60 40 25 5 4 10 10 20 30 40 50 0 45 1 30 30 LA 20 .5 q, l/s a = 40 100 35 2 20 20 a = 35 30 7.5 VEF-15 A) 50 0 A) B( 5 +210 B( ,d +2.5 +9 +15 mm +9 +15 mm 25 40 3 0 10 10 1 q, m /h 20 3 50 10 L A 100 4 30 5 40 20 30 20 3010 40 50 2 200 300 9 +15 mm q, l/s 100 5 q, l/s . 200 20 n = 6 8 10 15 20 25 2 10 20 30 40 50 60 a= 10 VEF-10 45 40 100 0 +2.5 +15 3 +21 mm +9 10 q, m /h 35 10 20 30 40 50 100 30 20 30 100 A) 50 200 20 q, l/s B( 25 ,d 50 200 0 4 6 8 10 n = 2 20 1 12 15 35 A L 40 20 VEF-20 VEF-20 30 30 ) .5 (A 2 100 3 25 = dB q, m /h 20 a , 200 10 40 50 100 200 300 10 20 500 L A 200 0 50 100 5 50 200 35 n = 2 4 6 8 +2.5 +15 +21 mm +9 20 10 40 12 15 45 100 10 20 30 40 50 30 30 40 .5 7 A) q, l/s ( n = 0100 2 4 =6 8 10 12 15 dB 35 , a 20 A) 0 B( L A1 30 ,d 20 0 50 L A1 5 +5 +9 +15 mm 25 0 40 10 35 20 5 4 10 30 40 50 60 30 q, l/s 20 30 .5 VEF-12 +2 5 0 . 5 ) n= +1 +19 mm a = +5 +7 +1 3 (A 25 10 q, m /h 40 50 60 50 10 20 30 40 dB 100 140 20 200 , 50 100 q, l/s 0 200 n=0 2 4 6 8 10 12 15 L A1 20 20 +a -a 100 35 pt, Pa pt, Pa
VEF-20
0 +2.5 3 +9 +15 +21 mm q, m /h q, m3/h 20 30 40 50 100 40 50 100 200 300 q, l/s 50 100 200 20 200 n = 6 8 10 15 2015 200 4 6 8 10 12 n=2 35 2520 45 VEF-20 40 30 100 A) 100 33/h q, m B( 35 25 ,d 0 40 50 100 200 300 500 ) 30 20 10 (A L A1 50 B 200 ,d n = 2 425 6 8 50 40 0 12 L A115 45 40 30 40 20 30 .5 100 .5 7 35 ) 20 2 = (A = 20 a a dB 30 , 0 50 0 +2.5 L A1 +15 +21 mm +9 25 10 5 +5 +9 +15 mm 0 40 10 20 30 40 50 100 10 5 4 10 20 30 40 50 60 30 q, l/s q, l/s 20 VEF-12 .5 VEF-20 +2 VEF-12 5 .5 0 a = 3 +5 +7 +1 +1 +19 mm 10 q, m /h q, m3/h 30 10 20 40 50 100 140 40 50 100 200 300 10 500 q, l/s 20 50 200 100 200 n=2 4 6 8 200 n=0 2 412 15 6 45 8 10 12 15 +a 40 -a 20 100 100 35 35 A) ( B 30 ,d 30 0 50 L A1 25 ) 50 40 (A 25 40 dB , 30 0 30 L A1 20 20 5 20 . 5 . 7 +2= 5 open .5 0 n = number of revolutions a = slot orice in mm .5 .5 mm a = a +5 +7 +1 +1 +19 +2 10 5 2.5 0 +5 +7 +11 +17.5 mm 10 10 20 30 40 50 100 140 5 4 10 20 30 40 50 60 q, l/s q, l/s
10 10
40
200 100
40
q 5
300 50
30 20 20 40
25 45 40
35 30
10 10
25
a=
5 2.
20
L A1
B ,d
(A
0 +2.5
+9
+15 20
+21 mm 30
n = num
40
50
10
q, l/s
VEF-15 q, m3/h 50
-a
q, m3/h 50
+a
40
100
100 n=6 8 10
200
VEF-16
pt, Pa
pt, Pa
pt, Pa
pt, Pa
50 40 30 20 10
300 10 500 15 2 20 n= 4 25 6 8 12 15 45 45 40 40 35
300
200
35
45
30 40
50 400 +2.5 10 30 10 20
30 25 40 50 20
+9
pt, Pa
a=
10 + 10
5 2.0
a=
5 l/s .q,
+15 +21 mm 20 30
L A1
,d
) (A
100
L A1
B ,d
(A
+2.5
+9
+15
+21 mm
40
50
100
VEF-20
q, l/s
200 100
20
q, m3/h 50
30
100
40
50
200 300 10 500
100
14
40
pt, Pa
-a
+a
n=2 4 6 8
12 15 45 40
35 30 25
pt, Pa
pt, Pa
50 40 30 20 10 10
a= +2 .5
5 .5 0 +5 +7 +1 +1 +19 mm
LA
10
,d
B(
A)
pt, Pa
q, l/s
20
30
40
50
100
140
a = slot orice in mm
Sound Data
pt, Pa
200 20 35
30 25
10
10
Size
10 12 15 16 20
30
25
L A1
,d 0
A B(
20 30 40 50 60 20 .5 63 125 250 7 500 1000 2000 4000 8000 .5 1 .5 a =revolutions n = number of a = slot in mm 7 6 6 4 2open 4 orice 11 +2 5 2.5 0 +5 +7 +11 +17.5 mm 10 6 5 3 4 5 4 4 2 10 1 20 13 30 q, l/s 1 1 2 1 1 4 9 18
Correction of sound level in dB at (Hz)
1 1
20
30
LA
,d
B(
A)
a = slot orice in mm
125
21 19 16 16 12
250
15 13 12 12 7
500
13 11 10 10 5
1000
11 10 9 9 4
2000
10 10 10 10 4
4000
6 7 8 8 7
8000
9 9 8 8 5
40
50 60
12 15 16 20
VEF-15
2 4
1 1
4 4
9 10
18 18
40
50 60
100 n=6
131
8 10
200 100
40
200 50
q, m3/h
300100
n=6 20 25 8 10
200 15 35
300 20 25 40 45
15
45
A B A B 46 41 20 41 C 20
CLICK!
Installation of mounting ring in wall. locking edges Installation of valve in mounting ring. Ensure that one of the valve wings points towards the centre of a locking edge.
46
VEF20
200 C 172
A B
1. 2.
35
200 172
20
46
35
41
240
20
20
C 240
Size
10 12 15 16 20
Part A Code
VEF-S-100 VEF-S-125 VEF-S-150 VEF-S-160 VEF-S-200
B
70 95
C
145 160
Weight A kg
0.12 0.16 0.22 0.26 0.34
100 125
1.
A
35
2.
SL000101
20
240
D D
A
Size
10 12 15 16 20
A
Weight kg Hole size
0,09 0,11 0,13 0,15 0,18 110 135 160 170 210
127 100 152 125 177 150 187 160 227 200
locking edges
Installation of valve in mounting ring. Ensure that one of the valve wings points towards the centre of a locking edge.
All dimensions shown in mm Bold text denotes next day delivery available if ordered by 4pm.
To remove valve, rotate in either direction until the valve unlocks from the mounting ring then pull straight out.
VEF exhaust air valve is a circular disc valve with a valve cone of aero-dynamic design. VEF-S is an exhaust air valve with integrated mounting ring. Valve is always supplied with a clamping ring which makes it suitable also for false ceilings. Correct height of the mounting ring makes it easy to connect a exible hose.
Product facts
VEF exhaust valve
Excellent characteristics with regard to noise level, pressure drop and air ow capacity Designed for wall or ceiling mounting Available in six sizes Manufactured of polypropylene plastic
Quick selection
Size VEF-08 VEF-10 VEF-12 VEF-15 VEF-16 VEF-20 25 dB 13 25 33 46 50 55 Air ow l/s (m3/h) at sound level 30 dB 15 29 40 56 60 65 (54) (104) (144) (202) (216) (234) 35 dB 18 34 50 66 70 78
Product facts
VEF-S exhaust valve
Good technical performance Available in ve sizes Airtight connection Simple installation and removal Manufactured from recyclable plastic Mounting ring adapted for false ceiling panels Easy to connect to a exible hose
133
CONSTRUCTION The IRIS is composed of regulation plates, regulating nut or handle (size 80) and regulation scale plus manometer connections and casing. The casing and regulation plates are made of hot-galvanized steel (standard IRIS) or acid-proof steel AISI 316 L (IRIS-aaa-H), other components of plastic. The joining collars are supplied with rubber sealing gasket. USE IRIS is an ideal solution for the exact and quick air flow measuring and regulation. Because of its acid proof material, the IRIS-aaa-H is best suited for premises, where acid proof ducts are used. INSTALLATION The IRIS damper is secured to the ducting with rivets. For vertical mounting ensure the weight of the interconnecting ductwork is fully supported. PRODUCT CODE Regulation and measuring device (IRIS-aaa) Diameter in mm (aaa) 80 - 800 Regulation and measuring device, acid-proof (IRIS-aaa-H) Diameter in mm (aaa) 100 - 800
IRIS-80 *) IRIS-80 *)
300
7 6 5 7 4 6 5 4
IRIS-100
300 3 200 300
3 2 200 100 300
IRIS-100
7 86
IRIS-100
5 74 6 5 4
200 7 300
IRIS-80 *)
6 5 6
IRIS-80 3 *)
7 4 6 5 4 5 4
300 200
IRIS-100
7 86
IRIS-100
5 7 4 6 5 4 3 6 5 4 2 3 1 2 3 1 2 50 45 1 6 3 IRIS-100 5 4 7 2 3 1 2 3 50 45 40 35 45 50 1 35 40 1 2 50 45
300
IRIS-100
7 8
pt (Pa)
3 200 45 2 100 50 1 40
pt (Pa)
pt (Pa)
pt (Pa)
100 40 30 45 2 50
1 40 20
20 1,5 10 2 4 10 3
1,5 10 3 4 7 10 300 1,200 5 2
IRIS-125 300
200 300 200 100 300
10
IRIS-125 2
6
7 300
30 40 50 45 30 30 1 40 1 20 10 30 35 35 40 40 25 25 30 30 20 L [dB(A)] Lp10A [dB(A)] p10A 10 5 35 20 7 5 20 4 30 10 3 40 30 40 70 qv (l/s) v (l/s) 35 70 q6 25 25 30 30 10 L [dB(A)] [dB(A)] v p10A1 3 4 v5 6 8 0 (m/s) 3 4 1 5,5 6 2 Lp10A 8 1 0 5 (m/s) 6v (l/s) 7 5 20 4 30 10 340 20 qv (l/s) 30 40 70 q 70 25 25 Lp10A [dB(A)] 5(m/s) L [dB(A)] v p10A1 1,5 6 2 8 1 0 3 4 v (m/s) 5 6 8 0 3 4 5 6 7 74 40 3 6 70 5 3 20 5 30 q (l/s)4 6 5 4 10 3 20 v 30 40 70 q (l/s) 300 v
35
pt (Pa)
pt (Pa)
pt (Pa)
30 50 30 2 50
10
1,5 2
50 50 40 [dB(A)] 40 [dB(A)] Lp10A L p10A 25 30 45 45 140 qv (l/s) 20 30 140 40 q 5 0 100 100 35 v (l/s) 35 40 40 [dB(A)] Lp10A Lp10A [dB(A)] 25 30 v (m/s) 3 4 5 v (m/s) 1 0 10 35 20 30 140 40 q5 100 140 qv (l/s) 100 (l/s) 35 v0
10
1,5 10 2
4 5 3 10 206 7 30 10 40
IRIS-125
IRIS-150
2 200
Lp10A [dB(A)] 30 Lp10A [dB(A)] v (m/s) 30 v (m/s) 2 3 4 5 25 10 10 20 3 0 4 0 5 0 100 v (l/s) 8 30 140 5 4 qv (l/s) 6 20 5 4 07 q 6 7 8 10 7 5 0 6 100 140 300
25 IRIS-150 1,5 4 5 5 3
IRIS-150
10 3
1,5
IRIS-150 3 4 5 1,5
8 7 8
v (m/s) IRIS-150 10 3 4 5 58
10
v (m/s) 5 4 3
IRIS-125
6 5
4 7
IRIS-125 2
3 6 12 50 45 5 4 3
IRIS-150
7 6
IRIS-150
5 8 4 7 2 3 6 5
4 7 3
300
4 2 3
pt (Pa)
pt (Pa)
pt (Pa)
pt (Pa)
1 45
50
23 55 1 2 55 1 50 45
2 3 55 1 2 55 1
pt (Pa)
pt (Pa)
50
1 35 30 25
40 45 40
50
pt (Pa)
pt (Pa)
pt (Pa)
pt (Pa)
50
pt (Pa)
pt (Pa)
10
IRIS-160 300
200 100 300
200
pt (Pa)
pt (Pa)
pt (Pa)
pt (Pa)
20 10 5 30 40 40 50 200 qv (l/s) 100 40 200 q20 30 40 v (l/s) 30 30 100 Lp10A [dB(A)] Lp10A [dB(A)] 35 25 35 25 v10 (m/s) 1 , 5 5 2 30 4 5 v (m/s) 10 2 1,5 2 4 1, 5 1 5 3 10 5 20 30 30 40 50 200 qv (l/s)100 200 q 20 30 10 40 50 100 20 30 40 v (l/s) 30 Lp10A [dB(A)] Lp10A [dB(A)] 25 25 v5 (m/s) 1 , 5 2 ,5 2 4 5 v (m/s) 10 1,5 2 4 15 13 0 5 3 20 30 40 20 30 8 40 507 100 5 7 200 qv (l/s) 6 100 5 4 200 q 40 10 20 6 30 8 40 5 v (l/s) 300 300 3 3 v (m/s) 1[dB(A)] ,5 2 1,5 2 3 4 5 10 Lp10A v (m/s) 1,5 2 3 4 5 10 200 200 8 6 5 4 8 7 6 5 4 7 2 2 300 300 3 3 Lp10A [dB(A)] 100 200 200 100 8 7 6 5 4 8 7 6 5 4 300 2 2 300 3 3 Lp10A [dB(A)] 200 100 50 200 100 50 1 1 2 40 40 2 20 50 20
45 Lp10A [dB(A)] 35
Lp10A [dB(A)] 45 35
20 5 10 50 20
40 50 55 55 1 1 45 [dB(A)] 25 30 35 Lp10A [dB(A)] 25 30 35 Lp10A 45 30100 40 50 100 200 300 qv (l/s) 50 200 300 q (l/s) v 40 50 40
IRIS-160
IRIS-160
45 5 v (m/s) L 2 30 35 3 1 4 [dB(A)] 1L 0p10A [dB(A)] 45 25 v (m/s) 30 35 p10A 310 4 1 , 5 5 25 0 5 40 30 100 qv (l/s) 200 300 qv (l/s) 50 20 100 40 50 200 300 40 35 Lp10A [dB(A)] v (m/s) 5 30 3 5 25 30 35 1L 0p10A [dB(A)] v (m/s) 3 5 4 1 , 55 22 10 4 50 8 100 200 300 7 qv (l/s) 6 5 4 300 qv (l/s) 4100 20 30 7 40 6 50 8 5 200 300
3 200
IRIS-200
p10A
IRIS-200
IRIS-160
IRIS-160
IRIS-200 5 L 4 1[dB(A)] ,5 2
7
p10A
v (m/s) IRIS-200 10 4 5 8 5
10
v (m/s) 5 4 3
IRIS-160
IRIS-160
IRIS-200 L [dB(A)]
7 Lp10A [dB(A)] 6
IRIS-200
8 5 4 3 2 7 6 5 4 3 2
4 7 3
3 2 55 1 50 45 40 45 50 2 45 40 35 45 50
pt (Pa)
pt (Pa)
45 40 35 30 45 50
1 40 1 35 50
pt (Pa)
pt (Pa)
30 100 50 20 40 30 50 20 40 10 30
50
50 30 100 50 1 45 40 20
3 2 55 1 50 2 55 1 55
pt (Pa)
pt (Pa)
pt (Pa)
pt (Pa)
50 30 50 1 40 45 20 10 50 30
55 1 55
30
1,5 30 1,5 30 1,5
40
2 40 2 40 2
20 5 10 50 20 53 10 50 20 53 20
3
50
40 40[dB(A)] 30 Lp10A [dB(A)] Lp10A 45 20 25 45 25 10 35 35 5 30 100 40 50 100 200 300 qv (l/s) 30 200 300 qv (l/s) 40 40 30 Lp10A 30 Lp10A [dB(A)] [dB(A)] v10 (m/s) 35 ,5 5 2 3 1 0 4 255 v (m/s) 10 4125 5 35 30 100 qv (l/s) 200 300 q30 100 40 50 200 300 v (l/s) 30 Lp10A [dB(A)] 30 Lp10A [dB(A)] 25 v5 (m/s) 3 1 0 4 255 v (m/s) 10 4 1 , 55 2 30 100 200 300 qv (l/s) 30 40 50 100 200 300 qv (l/s)
4 1,5 5 2 3 10 4 5
25 1 30
50
1,5 2
50
1,5 50 1,5 2
53 10 30 100
25 2 30 4 1 , 55 50 200
525 v (m/s) 30 35 1 0
v (m/s)
10
v (m/s)
v (m/s)
10
135
IRIS-250
300 8
p10A
IRIS-250
85 4 7 6 5 4
IRIS-315
300 200 3 300
4 2 100 200 3 300
IRIS-315
8 7
p10A
IRIS-315
6 58 4 7 6 5 4 3 6 6 5 5 4 4 2 3 3
300 Lp10A [dB(A)] 200 300 Lp10A [dB(A)] 100 200 300
pt (Pa)
Lp10A [dB(A)]
200 300
IRIS-250
Lp10A [dB(A)]
IRIS-250
8 5 7 4 2 6 3
7 46
5 5
8 5
74
58
4 7 3
pt (Pa)
32
Lp10A [dB(A)] 32 2
pt (Pa)
pt (Pa)
2 1
pt (Pa)
pt (Pa)
2 60 55 50 45 40 60 1 45 40 1 60 55 50 60 1
2 1
60 55 50 45 60 1 50 55 45
60
40 10 20 30 20 5 10 50
30 50 40 1 10 20 30
pt (Pa)
pt (Pa)
100
10 5
50
50 300 IRIS-400
55 60 1 1000 1500 qv (l/s) 50 55 55 55 60 45 45 50 60 50 v (m/s) 1 , 5 v (m/s) 1 0 v (m/s) 10 4 10 2 3 4 1 ,5 2 3 10 4 5 5 3 12 0 4 15 3 v (m/s) 12 0 1 10 50 40 50 40 45 45 55 5 5 5 55 100 50 200 100 300 400 500 200 3001000 400q500 1000 (l/s) q (l/s) 80 100 200 80 100 300 400 500 200 300 1000 400 500 q (l/s) 1000 q 1500 1500 v v v v (l/s) 45 50 45 50 40 45 40 5 45 5 5 v1 (m/s) v (m/s) v (m/s) 1,5 2 3 100 14 , 5 7 52 6 3 4 57 1 0 5 1000 4 5 100 36 8 5 12 0 4 4 5 1 3 300 6 400 2 0 1 500 1000 qv (l/s) 8 80 8 51 0 4 6 v (m/s) 4 1500 7 5 4 300 500 qv (l/s) 100 8 50 200 7 300 400 500 200 1000 qv (l/s) 80 100 200 300 400 500 200 1000 400 qv (l/s) 1500 300 300 300 3 3
20 5 10 50 200 1 60 300 100 400 500 200 1000 300 q 400 500 v (l/s) 55 1 20 5 10 1000 qv (l/s) 80 100
pt (Pa)
pt (Pa)
IRIS-400
IRIS-400
IRIS-500
p10A
IRIS-500
200 8 300
8 200 300 100
IRIS-400 IRIS-400 5 3 4 5 3 12 0 4 1
7 6 8 8 5 7 4 2 6 7 6 5 4 7 1
IRIS-500
12 0 v (m/s)
5 5 4
IRIS-400
3 IRIS-400 6 32
v (m/s)1 0
5 5 4 4
3 v (m/s)
IRIS-500
Lp10A [dB(A)] 7 Lp10A [dB(A)]
IRIS-500
5 47 2 3 6 3 2 1 2 65 60 55 50 1 65
Lp10A [dB(A)]
2 3 3 2 12 65 60
pt (Pa)
200 100 50 40
65 60 55 50 45
65
60
pt (Pa)
100 50
1
100 50 40 100 30 50 40 20 50 30 40
25 30 35 40
pt (Pa)
pt (Pa)
65
65 55 50
pt (Pa)
pt (Pa)
pt (Pa)
pt (Pa)
60 1 65
60 65
100 30 50 1 20 40
pt (Pa)
40
200
200
6 3
200
IRIS-630
200 100 300
pt (Pa)
10 10 4 200 6 3 300 85 1 0 2 4 166 3 6 v (m/s) 8 10 2 100 400 1000 7 500 68 7500 42000 5 100 2008 300 400 1000 qv (l/s) 300 300 Lp10A [dB(A)] Lp10A [dB(A)] 4 16 6 3 8 10 2 v (m/s) 4 6 3 8 10 2 200 200 8 7 8 6 5 7 4 63 5 300 300 Lp10A [dB(A)] Lp10A [dB(A)]
IRIS-630
55 45 55 60 50 30 60 Lp10A [dB(A)] Lp10A [dB(A)] 40 40 40 50 50 55 55 20 10 30 200 300 1000 300 40045 500 2000 qv (l/s) 1000 45 2000 qv (l/s) 50 50 [dB(A)] Lp10A Lp10A [dB(A)] 20 40 v v (m/s) 8 10 2 4 16 6 3 (m/s) 8401 0 2 45 16 45 10 300 300 1000 400 500 2000 1000 2000 qv (l/s) Lp10A qv (l/s) 200 [dB(A)] Lp10A [dB(A)] 40 40
55
1 65
45 25
300 1000
4 3 6 30
5002000
8 35
25
IRIS-630
300
IRIS-630 IRIS-630
7 68 Lp10A [dB(A)] 5 7 4 2
IRIS-630
IRIS-630
6 3
IRIS-800 8
300
8 200 300 100
pt (Pa)
30 35 40 45 25 30 35 40 4525 10 v1 (m/s) v (m/s) 4 300 3 6 6500 88 5 1 20 4 1473 6 18 8 2 0 5 14 4 18 4000 2000 qv (l/s) 7 5008 200 1000 2000 41000 40006qv (l/s) 300 3 3 v (m/s) 3 6 1 20 14 18 v8(m/s) 4 3 6 8 1 20 4 14 18 200
IRIS-800
300 1000
50 50 v8 (m/s) v (m/s) 1 20 4 14 5518 3 6 1 20 1455 18 40 25 45 30 35 40 45 500 2000 50 1000 4000 2000 4000 qv (l/s) qv (l/s) 50
IRIS-800
IRIS-800 IRIS-800
7 6 8 5 74 7 6 8 5 4 7
IRIS-800
2 IRIS-800 3 6 1 32
5 5
4 4
2 3 3 21 2 1 65 1
Lp10A [dB(A)]
200 100 50 40
200 3 100 50
2 65 40
100 30 2 50
65 30 30 5535 40 45 25 35 40 45 25 50 20 30 10 60 1000 300 400 500 2000 3000 1000 6000 2000 3000 q v (l/s)
65 40 20 60 50 30 65 40
50
55
25 20 30 35 30 10 1000 5002000
400 500
400 500
20 30 3 v20 (m/s) 4 6 8 1 20 430 14 18 3 6 v (m/s) 8 1 20 14 18 60 5560 55 25 35 40 25 40 45 50 45 50 35 10 10 300 1000 400 500 2000 1000 3000 2000 6000 q 3000 6000 qv (l/s) 500 v (l/s) 30 30 55 35 40 45 50 55 25 35 40 4525 50 10 10 v (m/s) 4 3 6 8 1000 1 20 4 14 3 61 8 8v (m/s) 1 2 0 14 186000 300 2000 3000 q500 v (l/s) 1000 400 500 2000 3000 6000 q (l/s)
v
65 L [dB(A)] 55 p10A 1000 5000 2000 10000 qv (l/s) 5000 60 10000 qv (l/s) 60 50 50 20 55 55 v (m/s) v (m/s) 6 25 1 2 0 L 45 14 18 3 6 45 8 1 2 0 14 18 L 25 304 35 3 408 45 3 0 3 40 p10A [dB(A)] p10A [dB(A)] 50 10 50 1000 500 2000 1000 5000 2000 10000 5000 10000 qv (l/s) qv (l/s) 25 10 30 35 4 500 2000 Lp10A [dB(A)] 5 40 45 Lp10A3[dB(A)] 402545 30 v (m/s) 3 6 8 1 20 4 14 3 6 18 8 v (m/s) 1 2 0 14 18 10000 1000 5000 qv (l/s) 50002000 10000 qv (l/s)
60 65 Lp10A3 [dB(A)] 30 40 45 55 5
1000
3 6
1 20
4 14
3 6 18
8 1 20 v (m/s)
14
18
v (m/s)
3 6
1 20
4 14
3 6 18
1 20 v8 (m/s)
14
18
v (m/s)
200
1 200 2
Lp10A [dB(A)]
200
pt (Pa)
pt (Pa)
pt (Pa)
pt (Pa)
pt (Pa)
pt (Pa)
pt (Pa)
pt (Pa)
125
16 21 17 20 18 17 12 12 9 7 7 5 3
250
12 16 13 14 14 12 8 5 6 4 3 3 2
500
9 9 7 8 6 5 3 0 2 1 2 3 2
1000
5 4 1 0 -1 -2 1 1 -1 -1 -1 -1 2
2000
-1 -6 -4 -6 -6 -5 -4 -2 -4 -4 -5 -6 2
4000
-6 -12 -6 -16 -13 -14 -17 -13 -9 -8 -9 -10 2
8000
-23 -25 -17 -29 -25 -26 -32 -27 -13 -11 -11 -13 3
The sound power levels of the duct for every octave band are obtained by adding the corrections Koct of octave bands (see table above) to the total sound pressure level Lp10A dB(A) according to the following formula:
m2 = 7% m2 = 10%
L Woct = L p10A + K oct Correction Koct is the average in the range of use of the IRIS regulation and measuring device.
>1D
>1D
>4D
Product Component
Casing, blades Regulation mechanism Stickers, window cover Veloduct-sealing Measuring tap
>2D
m2 = 7% m2 = 10%
Material
ot galvanized steel or acidH proof steel (AISI 316) Polyacetal
>2D
>2D >1D To ensure the functioning of the inlet air diffuser. >4D >2D >1D
>2D
>2D
Safety Distances
v
>2D
>2D
pm
>2D
>2D
pt (=ps) v
Regulation and Measurement of Air Flow The regulation plates form a virtually ideal measuring orifice which enables an easy and reliable measurement of the air flow. To determine the air flow, measure the pressure difference pm at the manometer connections p and check the corresponding air flow from the regulation chart.
m
The chart is shown on the damper casing and in the separate information for air flow regulation and measurement (the selection diagrams do not serve the air flow measurement). Air flow is regulated by the regulating nut or handle.
pt (=ps)
137
Size 80
A 70 32
D
D L
Size
80 100 125 150 160 200 250 315 400 500 630 800
Product Number
SL000140 SL000139 SL000138 SL000137 SL000136 SL000134 SL000133 SL000131 SL000129 SL000128 SL000127 SL000126
d
79 99 124 149 159 199 249 314 398 498 628 798
D
125 165 188 230 230 285 335 410 525 655 815 1015
L
120 110 110 110 110 110 132 132 155 170 170 270
Weight kg
A 70
35 30 30 22 32 32 40 35 42 42 47 62 77 92 107
A
0.5
32
30 30 30 40 40 50 50 50 100
0.5
Cleaning
6 7 4 5
IRIS, IRIS-S
qv qv
IRIS 80
IRIS 100...315
IRIS 400...800
139
APPLICATION Fire damper KSOP is an exhaust valve, used to prevent spreading of fire and smoke to duct systems. The valve is approved in fire class E 60. KSOP emits a low sound level and has good natural sound attenuation. A spring loaded fuse will close the valve when temperature in the immediate vicinity reaches the fusible link rating, 70 C. The spring loaded fuse can be changed. MATERIAL AND SURFACE FINISH The valve is manufactured from hot galvanized steel sheet. KSOP is powder coated for a high surface finish and good impact and scratch resistance. Standard colour White RAL-9010. Other colours on demand. The valve body is supplied with a cellular plastic gasket to form an airtight seal against the mounting frame. The separate mounting ring is manufactured from galvanized steel sheet. Each valve is delivered with mounting ring according to the country specific approvals. INSTALLATION Valve is supplied complete with spring loaded fuse and fixed by a screwing action to locate the valve lugs into indents in the mounting ring. INSTRUCTIONS Directions for installation, adjustment and care are set out in detail in our technical instruction which accompanies each product. The instruction is also accessible on www.flaktwoods.com. TECHNICAL DATA AND DIMENSIONING For complete dimensioning details, please see Flkt Woods product selection program. Contact our nearest sales office for further information. DESCRIPTIVE TEXT Fire damper valve KSOP manufactured by Flkt Woods PRODUCT CODE Fire damper (including mounting ring KKT) KSOP-aaa Size (aaa) 100, 125, 160, 200 Following markings are added to the valve code if needed: E = special colour For example: KSOP-100-E (KSOP-100 + KKT with special colour)
KSOP-160
KSOP-160 KSOP-160
KSOP-160 KSOP-160
KSOP-200 KSOP-200
KSOP-200
KSOP-200 KSOP-200
141
50
250
-1 -3 -3 -3 2
500
-1 -3 -1 -4 2
1000
1 -2 -2 3 2
2000
-4 0 -7 -8 2
4000
-8 -7 -11 -12 2
8000
-22 -24 -25 -29 3
Sound power levels by octave bands are obtained by adding to total sound pressure level Lp10A,dB(A) the corrections Koct presented in the table according to the following formula: L Woct = L p10A + K oct Correction Koct is average value in frequency range (Hz) Sound Attenuation L
Size
Adjustment (mm)
-1O
125
19 18 17 18 17 16 16 14 14 15 12 11 3
250
16 13 12 15 12 10 14 11 10 14 11 8 2
500
16 12 9 14 11 9 14 11 9 14 10 8 2
Size [mm]
100 125 160 200
A
74 85 89 107
Weight (Kg)
0.3 0.39 0.57 0.76
100
0 10 -1O
125
0 10 -1O
KKT
KKL
160
0 10 -1O
200
0 10
7 6 3
Tol.
The average sound attenuation L from duct to room including the end reflection of the connecting duct in ceiling installation, is obtained in the table above. Size KKT
100
50
Part Number KKT
SL000115 SL000114 SL000112 SL000111
50
Pack Size
56 36 25 12
d [mm]
99 124 159 199
D [mm]
122 148 184 225
Definitions qv pt Lp10A air volume total pressure drop sound pressure level with 4 dB room attenuation dB(A) sound power level by octave bands sound attenuation correction dB dB dB(A) l/s Pa (10 m2sab)
Lwoct L Koct
Pack Size
56 36 25 12
d [mm]
99 124 159 199
All dimensions shown in mm Bold text denotes next day delivery available if ordered by 4pm.
All construction products have to be CE marked from 1st July 2013 CE marking for fire dampers was made available from 1st September 2011 Fire test standard for dampers: Shall be EN 1366-2 NT-Fire or any other standards can not be used any more CE marked fire dampers according to EN 15650 should: Release mechanism - Shall always be at least thermal sensor 70 C Testing / inspection - at least once every six months Installation - Manufacturer shall provide installation instructions National certificates: Products according to EN 15650 Additional national certificates for installation and use of CE marked products? CE marking gives more responsibility to the manufacturer (us)! Manufacturer shall give Declaration of Conformity (CPD). This will become (CPR) Declaration of Performance Notified Body shall make yearly control visits (FPC) to manufacturer premises National type approvals are made according to national building regulations, which are valid for the respective country. Installation and use of the products are included in type approvals CE mark gives product performance in terms of classification standard terminology
T he fire resistance period of the fire damper meets the requirement of class E90 (test method EN 1366-2) and it can be used as a fire restricting device in fire insulated ducts of EI90 at most
GENERAL INFORMATION Fire damper ETPR-E-1 is used as a closing device for preventing the spread of fire in ventilation ducts. The fire resistance period of the fire damper meets the requirement of class E 90 (test method EN 1366-2) and it can be used as a fire restricting device in fire insulated ducts of EI 90 at most. The fire damper conforms to E 60 S tightness requirements for smoke dampers specified in standard EN-13501-3. The product fulfils the requirements of tightness class C according to EN 1751. The fire damper is equipped with a Veloduct gasket, and the diameter dimensions comply with the duct standard EN 1506. ETPR-E-1 is a circular blade fire damper with sizes up to 500 mm. The casing of the fire damper is equipped with a mounting flange, with which the fire damper can be fastened to a fire-separating building element. The fire dampers are equipped with a thermal fuse or with an electrical actuator. The release temperature of the fuse is +70C. Fuses of +50C and +100C are available to special order. The setting, release and replacement of the fire damper fuse can be carried out easily from outside the damper. The main parts of the fire damper are manufactured from hot-galvanized steel sheet according to the standard EN 10327. The surface treatment meets the requirements of class C2, EN ISO 12944-2. Fire dampers equipped for remote release or supervision are available to special order. PRODUCT DATA Sizes 100 - 500 Type approved in Finland, VTT-RTH-00079-09 Fire class E 120 (ve) / E 60 (ve) S E 90 (ho) / E 60 (ho) S ETPR-E-1 fulfills the requirements of BS 476: Part 20: 1987 The damper casing fulfils the requirements of tightness class C according to EN 1751 Product code example: Fire damper ETPR-E-1-315-01-1
100 50
p t, Pa
10 5
40
2000
4000
250
10 3
500
5 3
1000
0 3
2000
-7 3
4000
-13 3
8000
-18 3
Description
Flkt Woods fire damper ETPR-E-1 which is type-approved for installation into building elements of fire class EI 90 made of concrete, lightweight concrete, brick or gypsum plate walls of the same class. Product Code Fire damper (circular) Size (diameter mm) ETPR-E-1 - aaa - bb - 1 Accessories Extension piece Size (diameter mm) Inspection piece Size (diameter mm) Grille Size (diameter mm) FLD-aaa-1
100, 125, 150, 160, 200, 250, 300, 315, 400, 500
100, 125, 150, 160, 200, 250, 300, 315, 400, 500
50
20
40
Actuator 01 = fuse +70C 03 = 24V AC/DC and heat detector 04 = 24V AC/DC 05 = 230V AC/DC and heat detector 06 = 230V AC/DC 08 = auxiliary device microswitch open +70 C 12 = auxiliary device pneumatic cylinder, long fuse +70 C Material 1 = hot-galvanized steel Replacement fuse 3 4 5 6 7 = = = = = fuse fuse long long fuse 50C 70C fuse 50C *) fuse 70C *) 100C ETPR - 99 - 01 - c
FWD-aaa-1
100, 125, 150, 160, 200, 250, 300, 315, 400, 500
FND-aaa-1-1
100, 125, 150, 160, 200, 250, 300, 315, 400, 500
FICO-128 / FICO-2
145
E C
Li
Motorized Damper
Size
100 125 150 160 200 250 300 315 400 500
Product Number
SL000148 SL000147 enquire SL000146 SL000145 SL000144 enquire SL000143 SL000142 SL000141
D
100 125 150 160 200 250 300 315 400 500
B
205 205 205 205 205 205 205 205 280 280
C
129 134 159 159 203 237 381 281 390 480
E
160 185 220 220 260 310 380 380 470 570
F
80 80 80 80 80 80 80 80 80 80
G
110 110 110 110 110 110 110 110 110 110
Li
35 35 35 35 35 40 40 40 60 60
All part numbers standard fuse +70C, for other options please enquire. All dimensions shown in mm
A
80 80 80 80 80
35 10 35 10 35 10 35 10 35 10
Pneumatic Release A fire damper equipped with a pressure cylinder closes either when the thermal fuse blows or by means of a pressure impact when the pressure is switched on. The pressure is obtained from HALON / CO2 or other automatic extinction system network. The required pressure impulse for the cylinder is approximately 200 kPa. The pressure cylinder is connected to(open) the system by a Cu Switch position when fire damper is set up = stud pushed in Switch fire damper isset setup up=(open) = stud pushed in D8 damper pipe. position Fire tripped when = Fire damper
Fire damper tripped = blade Fire damper set up = blade closed open blade closed blade open Microswitch
CONNECTION PvR 2 m The microswitch indicates blade position, sends CABLE an impulse CONNECTION CABLE PvR 2 m 4 WIRES 0,75 mm2 after the blade has been closed to other fire dampers 4 WIRES 0,75 mm2 BK = black equipped for remote release, gives an alarm the BK =in black BK/WH black/white = black/white BN = BK/WH brown of control system or stops / starts the operation fans BN BU =microswitch blue= brown depending on the designed system. The has no BU = blue effect on the thermal fuse, nor does it cause the release of the fire damper. The microswitch can also be installed in contact with pneumatic or electrical release. In that case, it must be specified in order.
Contact action Contact action open open closed
A B C
AC-15: (Ue=230VAC, DC-13: R300B300 (Ue=24VDC, Ie =3A)Ie=1,5A) DC-13: R300 (Ue=24VDC, Ie =3A)
Switch position when fire damper is set closed up (open) = stud pushed in Fire damper tripped =OPERATING Fire damper set up = ... +70C ELECTRICAL PROPERTIES: TEMPERATURE -25 ELECTRICAL PROPERTIES: OPERATING TEMPERATURE -25 ... +70C blade closed blade open AC-15: B300 (Ue=230VAC, Ie=1,5A)
CONNECTION CABLE PvR 2 m 4 WIRES 0,75 mm2 BK = black BK/WH = black/white BN = brown BU = blue
FWD length L (consists of pieces BDEG+BDEM+BDET) L = 200 mm 100 - 200, 310 mm 250 - 315 and 430 mm 400 - 630.
ELECTRICAL PROPERTIES: OPERATING TEMPERATURE -25 ... +70C AC-15: B300 (Ue=230VAC, Ie=1,5A) DC-13: R300 (Ue=24VDC, Ie =3A)
Grille FND-AAA-1-1
2 1
Tf1
AC 24 V DC 24 V
147
~
2
< 5
< 5
< 80 M < 80 M
Tf2
Tf3
E TPR-17 has been fire resistance tested using the general principles of BS 476:Part 20:1987. ETPR-17 operated satisfactorily and retained its integrity for 130 min test duration. Test was made for both horizontal and vertical installation
GENERAL INFORMATION Fire damper ETPR-17 is used as a closing device for preventing spread of fire and smoke in ventilation ducts between fire compartments. ETPR-17 has been fire resistance tested using the general principles of BS 476:Part 20:1987. ETPR-17 operated satisfactorily and retained its integrity for 130 min test duration. Test was made for both horizontal and vertical installation. Operation is not dependent on the direction of air flow. The joining collars are supplied with rubber sealing gasket and diameters conform with standard EN 1506 (EUROVENT 2/3, SIS 827206, SFS 3282). PRODUCT DATA Sizes 100 - 500 Fire resistance tested at Warrington according to BS 476: Part 20:1987; 130 min integrity The damper casing fulfils the requirements of tightness class C according to EN 1751 Product code example: 0Fire damper ETPR-17-315-01-1
100 50
10
12
15
pt, Pa
10 5
40
2000
4000
250
10 3
500
5 3
1000
0 3
2000
-7 3
4000
-13 3
8000
-18 3
Description Flkt Woods fire damper ETPR-17 for installation into building elements made of concrete, lightweight concrete or brick.
Size (diameter mm) 100, 125, 160, 200, 250, 315, 400, 500 Actuator 01 = fuse +70C 08 = auxiliary device microswitch open +70 C 12 = auxiliary device pneumatic cylinder, long fuse +70 C Material 1 = hot-galvanized steel Replacement fuse 3 4 5 6 7 = = = = = fuse fuse long long fuse 50C 70C fuse 50C *) fuse 70C *) 100C ETPR - 99 - 01 - c
149
50
20
40
E C
Li
Size
100 125 160 200 250 315 400 500
Product Number
SL000158 SL000157 SL000155 SL000154 SL000153 SL000151 SL000150 SL000149
D
100 125 160 200 250 315 400 500
B
205 205 205 205 205 205 280 280
C
129 134 159 203 237 281 390 480
E
160 185 220 260 310 380 470 570
F
80 80 80 80 80 80 80 80
Li
35 35 35 35 40 40 60 60
Weight (kg)
0.9 1.1 1.3 1.6 2 2.7 5.1 6.8
SEALED FITTINGS
CONTENTS Page
Introduction 151-152 BDEB 153-154 BDET 155 BDED 155 BDEA 156 BDEA-6 157 BDEG-4 157 BDEM-1 157 BDEN-1 158 BDEP-1 158
151
SEALED FITTINGS
A complete system of round ducting for which type approval for tightness class D has been granted.
GENERAL INFORMATION The SuperLite Veloduct system is a complete system of round ducting for which type approval for tightness class D according to EN 12237 has been granted. All duct fittings are equipped with a sealing ring made of EPDM rubber. SuperLite Ducting: Granted certificate of approval 1718/88 by SITAC/Swedish Institute for Technical Approval in Construction: for tightness class D in terms of tensile strength permits rapid, easy and clean installation can be installed in any climate THE SEAL The sealing principle is illustrated in the drawings below. These show an insertion fitting and a fit-on (tube) fitting. The seal is made of solid EPDM rubber and is fixed to the end of the fitting. The seal is highly resistant to moisture, airborne pollutants and solar radiation and can withstand continuous exposure to temperatures between -30C and +80C with an unimpaired function. MATERIALS AND FINISH Pipes and pipe components are made of hot-dip galvanized sheet steel in accordance with EN 10346 with a zinc thickness of 275 g/m2 (double sided). This sheet is suitable for use in an environment with corrosivity class C2 in accordance with ISO 9223 and/or environmental class M2 in accordance with VVS AMA 98. TOLERANCES Sheet metal thickness according to SS-EN 10143 Weight 10% Length. The following tolerances are applicable to the basic dimensions specified.
Basic dim., mm
15
Tolerance, mm 0 2
SEALED FITTINGS
bbb
L L i
Li
25 25 30 40 40 50 60 60 70
bb
Li L
b bb
153
SEALED FITTINGS
Li
BDEB-60-008 SL000442 BDEB-60-010 SL000441 BDEB-60-012 SL000440 BDEB-60-015 SL000439 BDEB-60-016 SL000438 BDEB-60-018 SL000437 BDEB-60-020 SL000436 BDEB-60-022 SL000435 BDEB-60-025 SL000434
b bb
r
Li
BDEB-90-008 SL000433 BDEB-90-010 SL000432 BDEB-90-012 SL000430 BDEB-90-015 SL000428 BDEB-90-016 SL000427 BDEB-90-018 SL000425
bbb
BDEB-90-022
SL000422
1.5 1.7
BDEB-90-025 SL000421
BDEB-90-020 SL000424
1.3
SEALED FITTINGS
T-piece - BDET
ccc
BDET
BDET-1-010-010 BDET-1-012-012 BDET-1-015-015 BDET-1-016-016 BDET-1-018-018 BDET-1-020-020 BDET-1-022-022 BDET-1-025-025
r
Li
H bbb
Li
BDED
BDED-3-bbb-ccc
012-010
Product Number
enquire
L mm 25
Weight Kg 0.22
Lp
Li
-015-010 -012
enquire enquire
40 25
0.3 0.28
45 35 15
bbb
ccc
55 40 25 20
70 55 35 35 20
75 70 45 30 20
85 65 65 50 40 25
155
SEALED FITTINGS
BDEA
BDEA-1-bbb-ccc Product Number L mm
60
r mm
10
Weight Kg
0.19
-010--010 SL000504
ccc r
83 75
20 12
0.19 0.28
Li
H
015-010 -012 enquire enquire 95 95 100 20 20 25 0.19 0.24 0.37
bbb
-015 SL000497
20 20 25 16
-016 SL000495
20 20 25 30 20
20 20 25 30 20 25
-020 SL000488
15 15 25 25 20 20 22
15 15 25 25 20 20 22 20
-025 SL000479
SEALED FITTINGS
BDEA-6
BDEA-6-xxx
-008 -010 -012 -015 -016 -018 -020 -022 -025
bbb r
Li
12-22
BDEG-4
BDEG-4-xxx
-008 -010 -012 -015 -016 -018
bbb
Li
BDEM-1
BDEM-1-xxx
-08 -010 -012 -015 -016 -018 -020 -022 -025
bbb
Lp
Bold text denotes next day delivery available if ordered by 4pm.
157
SEALED FITTINGS
BDEN-1
BDEN-1-xxx
-008 -010 -012 -015 -016 -018 -020 -022 -025
bbb
Li
BDEP-1
BDEP-1-bbb 1
-008 -010 -012 -015 -016 -018 -020 -022 -025
bbb
Li
ATTENUATORS
SuperLite - Attenuators
Notes
SUPERLITE - ATTENUATORS
CONTENTS Page
Introduction 159-160 Pressure Drops 161 Coding Drawing and Dimensions 162
159
ATTENUATORS
SuperLite - Attenuators
A vailable with mineral or glass fibre wool insulation
F lkt Woods high quality sound attenuators are easy to install and available in a wide range P roducts include both straight and bent attenuators for circular or rectangular duct systems
GENERAL INFORMATION BDER-30 Fire resistance class E60, EI30 in accordance with the type approval certificate no. 2525/80 DESCRIPTION Straight, sound absorber with 50 mm thick mineral wool filling. The sound absorber consists of a perforated sheet steel tube enclosed by end pieces and a sheet steel casing. The space between the tube and casing is filled with attenuating material covered with nonwoven fabric as protection against fibre migration.
SUPERLITE - ATTENUATORS
160
ATTENUATORS
SuperLite - Attenuators
Attenuation
Attenuation, dB Mid-frequency, Hz Dia
63 125 250 500 1000 2000 4000 8000
Product Code
Safety distance to EI30 from persons Height Weight Kg evacuating the premises
SL000345
010030
13
16
21
27
11
100
200
2.4
50
50
SL000344
060
11
24
34
40
35
17
100
200
4.1
50
50
SL000343
090
14
31
45
43
35
21
100
200
6.6
50
50
SL000342
120
18
42
50
50
50
31
100
200
9.5
50
50
SL000341
012030
11
14
19
20
125
225
2.6
50
50
SL000340
060
20
28
35
28
13
125
225
4.5
50
50
SL000339
090
13
30
40
42
31
16
125
225
7.6
50
50
SL000338
120
18
39
50
50
42
20
125
225
11
50
50
SL000337
015030
12
16
12
160
260
2.9
50
50
SL000336
060
17
23
29
20
160
260
5.8
50
50
SL000335
090
11
29
34
41
27
11
160
260
50
50
SL000334
120
17
36
45
50
36
14
160
260
13
50
50
SL000328
020060
14
20
26
15
200
300
100
50
SL000327
090
24
30
36
20
200
300
10
100
50
SL000326
120
14
30
37
46
25
12
200
300
14
100
50
SUPERLITE - ATTENUATORS
SL000324
025060
12
18
23
10
250
355
8.6
100
50
SL000323
090
19
25
32
12
250
355
12.2
100
50
SL000322
120
11
25
30
39
14
10
250
355
18
150
50
SL000507
031-060
12
16
19
15
14
315
415
7.9
100
50
SL000508
031-090
18
24
25
17
16
315
415
11
100
50
SL000509
031-120
20
26
30
20
17
315
415
17.3
100
50
SL000510
040--090
20
22
21
18
15
400
500
18
100
50
SL000511
040-120
25
29
25
21
17
400
500
22.8
100
50
161
ATTENUATORS
SuperLite - Attenuators
Ordering key
Sound absorbers Size (bbb) Length (ccc) BDER-30-bbb-ccc
Height bbb
ccc
SUPERLITE - ATTENUATORS
162
DOMESTIC
Notes
SuperLite - DX100
SUPERLITE - DOMESTIC
CONTENTS Page
DX100 163-166 DX200 and CF20 167-170 DX400 and CF40 171-174 SL100 and SL150 175-178 Xplus 275 179-182 Xplus 2 183-186 XIM 187-190 GX6, GX9 and GX12 191-194 PX6, PX9 and PX12 195-198 RX6, RX9 and RX12 199-202 WX6, WX9 and WX12 203-206
163
DOMESTIC
SuperLite - DX100
Complete with a universal mounting kit, air operated backdraught shutter, outer grille and ducting IPX5 rated (except DX100PIR = IPX4)
S ingle speed 100mm (4) axial extract fans Maximum fan performance 21 l/s Lubricated for life motors with thermal cut-out protection Clip-off front cover for ease of cleaning
THE RANGE A comprehensive range of stylish, compact and easy to install single speed fans. Suitable for a wide range of domestic applications including bathrooms, shower rooms and toilets, including zones 1 & 2. Also suitable for commercial applications such as hotel bathrooms,office toilets and other small rooms. DX100 models have a softly curved flowline grille design which will blend into wall or ceiling dcor, whilst the shallow depth of the outlet spigot ensures compact window installation. All models have optional universal mounting kit available (wall tube, gasket x 2, outer grille, skirt moulding for window) suitable for wall, ceiling or window mounting (in single glazing up to 6mm) applications. The DX range includes an air operated backdraught shutter, outer grille and ducting. Control options include integral pullcord and timer; humidistat and PIR options offer automatic control. All models are IPX5 rated (except DX100PIR) and BEAB approved, demonstrating accredited levels of safety. They are all suitable for 220 - 240V 50Hz mains operation, have lubricated for life motors, Class B insulation for operation in ambient temperatures up to 40C and are fitted with a thermal cut out. KEY FEATURES Application: Domestic bathrooms, shower rooms, and toilets. All models come complete with wall and window fitting kit Control options: Pullcord, timer, humidistat and PIR Legislation: Conforms to Building Regulations Part F1 Hole diameter: 1 17mm (wall/ceiling) 125mm (window) 110mm (shaft/ducting)
DX100 Reference number Remote switch (supplied separately) Integral pullcord Integral timer (adjustable from 2-20 mins) Humidity sensor (50-90% RH) Passive infrared sensor Maximum air flow (FID, m3/h) Maximum air flow (FID, l/s) Sound pressure level (dB(A)@3m) Electrical power rating (W) IP rating Universal mounting kit Weight (kg) Guarantee (years, UK) 76 21 35 12 IPX5 1.2 3 DV100005
DX100PC DV100006
DX100T DV100007
DX100H DV100008
DX100HP DV100009
DX100PIR DV100010
76 21 35 12 IPX5 1.2 3
76 21 35 12 IPX5 1.2 3
76 21 35 12 IPX5 1.2 3
76 21 35 12 IPX5 1.2 3
76 21 35 12 IPX4 1.2 3
SUPERLITE - DOMESTIC
164
DOMESTIC
SuperLite - DX100
Performance Data
Models
DX100 Ref. DV100005 Single speed axial unit Operated by a remote switch or sensor (In a bathroom normally a separate pullcord or the lighting circuit) Includes universal mounting kit Colour: White DX100PC Ref. DV100006 DX100HP Ref. DV100009 Single speed axial unit with humidistat and pullcord Timer function adjustable (2-20mins) Automatic On/Off operation by integral humidity sensor, adjustable from50-90% RH Pullcord On feature overrides the auto humidity sensor function Includes universal mounting kit Colour: White DX100PIR Ref. DV100010 Single speed axial unit with PIR detector Automatic On/Off operation Integral passive infrared sensor Includes universal mounting kit Colour: White
SUPERLITE - DOMESTIC
165
Single speed axial unit with pullcord Operated by integral pullcord Includes universal mounting kit Colour: White
DX100T Ref. DV100007 Single speed axial unit with timer Timer triggered by a remote switch - usually the lighting circuit Adjustable timer (2-20mins) Includes universal mounting kit Colour: White DX100H Ref. DV100008 Single speed axial unit with humidistat Automatic On/Off operation by integral humidity sensor, adjustable from 50-90% RH Timer function adjustable (2-20mins) Includes universal mounting kit Colour: White
DOMESTIC
SuperLite - DX100
Dimensions
DX100
Back Draft Shutter
Wall Mounting Hole diameter: 117mm Ducting size: 100mm Alternative Accessories Easy fit kit EFT Ref. DV900004 Vent cowl VC10 Ref. DV900056
Ceiling Mounting Hole diameter: 117mm Ducting size: 100mm Installation Accessories Condensation trap XCT100 Ref. DV900013 Vent cowl VC10 Ref. DV900056
Window Mounting Hole diameter: 125mm Max. glass thickness: 6mm Installation Accessories Double glazing kit DXDG Ref. DV900070
Ducting Application Hole diameter: 110mm Ducting size: 100mm Installation Accessories Condensation trap XCT100 Ref. DV900013
SUPERLITE - DOMESTIC
166
DOMESTIC
SUPERLITE - DOMESTIC
167
DOMESTIC
Adjustable humidistat on condensation control models Automatic air operated backdraught shutter fitted Can be surface or recess mounted
THE RANGE This range of centrifugal pressure developing fans is designed for bathroom, toilet and utility room installations where longer duct runs are required. They are also suitable for many commercial applications such as hotel rooms, office toilets and commercial wet rooms. All models have a gloss white casing with clean and sleek appearance and can be surface mounted or easily recessed into ceilings or stud work walls, in recesses as little as 50mm deep. They can also be can be connected, using the side entry knockout provided, to profile 29mm flat plastic ducting with the use of a FDA Premier fan adaptor accessory. Alternatively 100mm circular ducting can be used with the spigot supplied. They can also be through wall mounted using a 100mm wall tube kit (CF20 models are supplied with a brown 100mm external outlet grille for wall or soffit fixing). DX200 and CF20 models feature a neon indicator and all models have totally enclosed and maintenance free for life motors, with self aligning bearings and thermal cut-out protection. The clip off front cover and pull off removable fan blade allow easy cleaning and maintenance and all feature an automatic air operated back draught shutter. DX200 and CF20 models are IPX5 rated. All are BEAB approved a suitable for 220-240V AC 50Hz mains operation.
KEY FEATURES Application: S uitable for surface, flush wall and ceiling mounting. Window kit available. Control options: Pullcord, timer and humidistat Legislation: Conforms to Building Regulations Part F1
Reference number Remote switch (supplied separately) Integral pullcord Integral adjustable run-on timer (30s to 20 mins) Integral fixed run-on timer (20 mins) Humidity sensor (50-90% RH) Quick visit facility (2 minutes) Speeds Trickle ventilation facility Extract performance (FID, m3/h) boost speed 3 speed 2 speed 1 trickle Extract performance (FID, l/s) boost speed 3 speed 2 speed 1 trickle Extract performance (FID, l/s) boost speed 3 speed 2 speed 1 trickle Electrical power rating (W) IP rating Weight (kg) Guarantee (years, UK)
30 14
30 22 14 10
50 32
50 42 32 26 34 IPX5 1.75 3
34 IPX5 1.75 3
SUPERLITE - DOMESTIC
168
DX200
DX200T
CF20
CF20T
DOMESTIC
Performance Data
DX200 Range DX200T/CF20
Models
Premier DX200 Ref. DV100001 High performance centrifugal unit Choice of 2 set speeds Premier DX200T Ref. DV100002 High performance centrifugal unit with timer Room size selector matches extract performance for improved efficiency QuickVisit delay feature prevents fan from running should light be switched On/Off again within 2mins Mechanical trickle ventilation facility Built-in run-on period after light switched Off. User adjustable from 30s-20mins Premier CF20 Ref. DV100003 High performance condensation control centrifugal unit Step-speed, user adjustable humidistat Room size selector matches extract performance for improved efficiency Tricklevent and Pullcord manual override Includes external wall grille Premier CF20T Ref. DV100004 All the features of CF20 plus: Auto run-on after light switched Off QuickVisit delay feature prevents fan from running should light be switched On/Off again within 2 mins
SUPERLITE - DOMESTIC
169
DOMESTIC
Dimensions
DX200 Range DX200T/CF20
100
Installation Accessories Wall vent kit VK10 Ref.DV900001 Wall tube WD100 Ref.DV900005 Easy fit kit EFT Ref.DV900004
Installation Accessories Wall vent kit VK10 Ref.DV900001 Wall tube WD100 Ref.DV900005 Easy fit kit EFT Ref.DV900004
Installation Accessories Condensation trap XCT100 Ref.DV900013 Vent cowl VC10 Ref.DV900056 Ceiling mounting adaptor XCMK Ref. DV900012
Installation Accessories Condensation trap XCT100 Ref.DV900013 Vent cowl VC10 Ref.DV900056 Ceiling mounting adaptor XCMK Ref. DV900012
Installation Accessories Condensation trap XCT100 Ref.DV900013 Vent cowl VC10 Ref.DV900056 Ceiling mounting adaptor XCMK Ref. DV900012
SUPERLITE - DOMESTIC
170
Ceiling Mounting with flat ducting Hole diameter: 117mm (or w233 or h203 flush mounted)
Flush Ceiling Mounted Hole diameter: 117mm (or w233 or h203 flush mounted)
Surface Ceiling Mounted Hole diameter: 117mm (or w233 or h203 flush mounted)
DOMESTIC
SUPERLITE - DOMESTIC
171
DOMESTIC
A djustable humidistat on condensation control models (50% - 90%) A utomatic air operated backdraught shutter fitted Can be surface or recess mounted
THE RANGE Kitchen ventilation has never looked so good. Since its launch, Premier has taken the ventilation market by storm. DX400 extract and CF40 condensation control fans are no exception. These pressure developing centrifugal fans are sleekly styled and are ideally suited for use in kitchens, utility rooms and larger bathrooms and toilets and individual offices. They can be surface or flush mounted in walls and ceilings using the universal mounting accessories provided, and include a back draught shutter and outlet grille. Both models have their inlet discreetly concealed behind a stylish white front cover. This cover is held in position by clips for easy removal for cleaning. Control options include integral pullcord and timer. Models with an integral humidistat offer automatic control. CF40TD features a delay start quick visit facility preventing the fan from coming on should the light be switched on and then off within 2 minutes. All models are IPX5 rated and BEAB approved. They are all suitable for 220 - 240V 50Hz mains operation and feature external rotor motors with integral balanced impellers, sealed for life maintenance free bearings and safety thermal cut out protection. Optional filters are available, please enquire for further details.
DX400 Reference number Remote switch (supplied separately) Remote switch (supplied) Integral pullcord Integral adjustable run-on timer (30s to 20 mins) Humidity sensor (50-90% RH) Quick visit facility (2 minutes) Speeds Trickle ventilation facility Extract performance (FID, m3/h) boost speed 3 speed 2 speed 1 trickle Extract performance (FID, l/s) boost speed 3 speed 2 speed 1 trickle Extract performance (FID, l/s) boost speed 3 speed 2 speed 1 trickle Electrical power rating (W) Hole diameter IP rating Weight (kg) Guarantee (years, UK) 2 3 3 3 5 250 174 143 90 61 69 48 40 25 17 55 46 40 33 27 77 115 IPX5 3 3 5 250 174 143 90 61 69 48 40 25 17 55 46 40 33 27 77 115 IPX5 3 3 5 250 174 143 90 61 69 48 40 25 17 55 46 40 33 27 77 115 IPX5 3 3 DV111001W DX400T DV111002 DX400PC DV111003
KEY FEATURES Control options: Pullcord, timer and humidistat Legislation: Conforms to Building Regulations Part F1 Hole diameter: 117mm
DX400RS DV111004
CF40 DV111005
CF40T DV111006
CF40RSTD DV111007
245 143
68 40
55 42
78 115 IPX5 3 3
SUPERLITE - DOMESTIC
172
DOMESTIC
Performance Data
DX400 Range CF40 Range
Models
Premier DX400 Ref. DV111001 Two speed centrifugal fan Pre-select speed to suit application Alternatively use optional COS switch to change between speeds and On/Off Includes external wall grille Premier DX400T Ref. DV111002 A lternatively use optional COS switch to change between speeds and On/Off Trickle vent option is activated by a preset switch on the unit Fan running status lights Includes external wall grille Premier CF40 Ref. DV111005 Condensation Control Range with humidistat Automatic operation through integral humidity sensor Pullcord selects High, Low, Off or Trickle Premier CF40TD Ref. DV111006 Automatic operation through integral humidistat Pullcord selects High, Low, Off or Trickle QuickVisit delay feature prevents the fan from running should the light be switched On/Off again within two minutes Fan running status lights Includes external wall grille Premier CF40RSTD Ref. DV111007 Automatic operation through integral humidistat MOS remote switch (supplied) selects high or low speed and can switch the unit Off (or to tricklevent) Built in humidity control run on period User adjustable from 30sec-20min Fan running status lights Includes external wall grille Note: For kitchen applications a grease filter PDXGF is recommended Ref. 91145AA
SUPERLITE - DOMESTIC
173
Centrifugal fan with timer Timer is typically connected to a lighting circuit Built in run-on period after the light has been switched Off, user adjustable from 30s-20min Fan operates at full speed when light is On, then operates at reduced speed during run-on and the switches to either Trickle or Off (installer selectable) QuickVisit delay feature prevents the fan from running should the light be switched On/Off again within two minutes Fan running status lights Includes external wall grille Premier DX400PC Ref. DV111003 H igh, Low, On/Off with tricklevent operated by integral 3 position pullcord switch Fan running status lights Includes external wall grille Premier DX400RS Ref. DV111004 Two speed centrifugal fan Pre-select speed to suit application
DOMESTIC
Dimensions
DX400/CF40 Range
100
100 Spigot
All dimensions shown in mm
Ceiling Mounting Hole diameter: 117mm Ducting size: 100mm Installation Accessories Condensation trap XCT100 Vent cowl VC10 Ceiling mounting kit XCMK
Ducted Applications
SUPERLITE - DOMESTIC
174
DOMESTIC
SUPERLITE - DOMESTIC
175
DOMESTIC
M odels include remotely switched, integral pullcord, timer, humidistat and humidistat with timer control options M aximum fan performance 100mm (18.5 l/s) 150mm (60 l/s)
THE RANGE Meet the new generation of FW X-Range Slimline SL100 and SL150 fans, with wall hugging wafer-thin grilles designed for modern living. They are white in colour and are ideal for domestic bathrooms, shower rooms, toilets and other small rooms. With an internal projection of only 10mm, the 100mm FW X-Range Slimline unit is one of the lowest profile bathroom fans available. For bigger bathrooms Slimline is also available in a 150mm size offering performance and style. For rooms with no opening windows Slimline SL100 is available with a built-in overrun timer. Humidistat models are available for shower rooms and heavily used bathroom applications. Ordering is straightforward: simply select the size and control option required, then add the appropriate window or wall kit. But the Slimline range doesnt just have a pretty face, installation is simple too. All Slimline models have two adjustable QuickClamp fixings which make traditional wall plug and screw fixings a thing of the past The IPX4 rated units fully meet the requirements of the Building Regulations for bathrooms, toilets and kitchens and the IP requirements for zone 1 and zone 2 as defined by the IEE Wiring Regulations (16th Edition) for a supply voltage of 220-230V 50Hz and ambient temperatures up to 40C.
KEY FEATURES Application: Domestic bathrooms, shower rooms, toilets, wall, ceiling and window fitting. For wall or duct mounting Control options: Pullcord, timer and humidistat Legislation: Conforms to Building Regulations Part F1 Spigot diameter: 100mm (SL100) 150mm (SL150)
SL100 Reference number Remote switch (supplied separately) Integral pullcord Integral timer (adjustable up to 15 mins) Integral humidity sensor (45-99% RH) Extract performance (FID, m3/h) Extract performance (FID, l/s) Sound pressure level (dB(A)@3m) Electrical power rating (W) IP rating Weight (kg) 67 18.5 39 15 IPX4 0.6 DV110001
SL100P DV110002
SL100T DV110003
SL100HT DV110004
SL150 DV110005
SL150 DV110007
SL150T DV110006
SL150HT DV110008
SL150HP DV110009
67 18.5 39 15 IPX4 0.6 67 18.5 39 15 IPX4 0.6 67 18.5 39 15 IPX4 0.6 218 60 43 35 IPX4 0.9
SUPERLITE - DOMESTIC
176
DOMESTIC
Performance Data
SL100 Ref. DV110001 Single speed axial fan Operated by remote switch or sensor (in a bathroom normally a separate pullcord or lighting circuit) Colour: White SL100P Ref. DV110002 Single speed axial fan with pullcord Operated by integral On/Off pullcord switch Colour: White SL100T Ref. DV110003 Single speed axial fan with timer Timer triggered by remote switch-usually the lighting circuit Timer variable from 3-15mins Colour: White SL100HT Ref. DV110004 Single speed axial fan with humidistat and overrun timer Built in adjustable humidistat Integrated overrun timer eliminates nuisance tripping Timer variable from 45s-15mins Colour: White
SL150 Ref. DV110005 Single speed axial fan Operated by a remote switch or sensor, usually a lighting circuit Built in backdraught shutter Colour: White SL150P Ref. DV110007 Single speed axial fan with pullcord Operated by integral On/Off pullcord switch Built in backdraught shutter Colour: White
SUPERLITE - DOMESTIC
SL150HT (SL150T see page 39) Ref. DV110008 Single speed axial fan with humidistat and overrun timer Built in adjustable humidistat Integrated overrun timer eliminates nuisance tripping Timer variable from 45s-15mins
177
DOMESTIC
Dimensions
SL100 Range SL150 Range
148
190
15
All dimensions shown in mm
115
190
Ducting Application Hole diameter: 117mm (SL100) 157mm (SL150) Duct diameter 100mm (SL100) 150mm (SL150) Installation Accessories Condensation trap XCT100 Ref. DV900013
190
Installation Accessories SL100 wall kit SLWK Ref. DV900061 SL150 wall kit SLWK Ref. DV900062
Installation Accessories Flexible ducting FD150 Ref. DV900026 Condensation trap XCT100 Ref. DV900013
Installation Accessories SL100 window kit Ref. DV900066 SL150 window kit* Ref. DV900067 * Backdraught shutter must be removed
SUPERLITE - DOMESTIC
178
DOMESTIC
SUPERLITE - DOMESTIC
179
DOMESTIC
S uitable for domestic dwellings with a total internal volume up to 450m3 Ideal solution for multipoint extract High pressure, quiet and speed controllable Available in AC and with Ultra DC motors
THE RANGE Higher density building requires new methods of ventilation. Apartments for example can often have only one external wall face, requiring ductwork to reach some rooms. Having one ventilation outlet is not only preferred aesthetically by architects it means less builders work and minimises noise breakout. Suitable for domestic dwellings with a total internal volume up to 450m3. Also suitable for a wide range of commercial applications where multiple extract points can be served by a single fan, for example toilet cubicles. The FW X-Range Xplus range is the ideal solution for multipoint extract applications. Available in AC and now with UltraDC motors Xplus is easily installed in houses and flats. The Xplus range is a high pressure, quiet, speed controllable system designed for continuous 24/7 running ensuring that wet rooms are properly ventilated to minimise the migration of high humidity to other rooms. Used in conjunction with Xflex flexible ducting, Profile 29 flat ducting and RegulAir ventilation terminals, the system can be concealed above ceilings and in stud walls. This unit is controllable by means of a three speed hard wired switch.
KEY FEATURES Type: Continuous mechanical extract unit (MEV) Application: Wholehouse system Control options: 3 speed
SUPERLITE - DOMESTIC
180
DOMESTIC
Performance Data
Models
Xplus 275 Ref. DV200001 Multi-speed central extract unit Three 125mm diameter intake spigot connections and a 125mm diameter outlet Manufactured in high impact ABS External rotor motor / impeller Moulded high performance scroll Integral fixing points Suitable for temperatures up to 40C Terminal box for electrical connection Black finish
SUPERLITE - DOMESTIC
181
Three Speed Controller Ref. DV900015 3 speed control switch suitable for Xplus 275
DOMESTIC
Dimensions
Xplus 275
107
432
349
431 105
All dimensions shown in mm
456
SUPERLITE - DOMESTIC
182
DOMESTIC
SUPERLITE - DOMESTIC
183
DOMESTIC
Low profile design Six 125mm extract spigot connections Moulded high performance scroll Suitable for temperatures up to 50C
THE RANGE The Xplus 2 is a high performing central extract system designed to continuously extract stale, moist air from all wet areas, such as kitchens and bathrooms. The unit is primarily used in domestic applications but can also be used for commercial applications, where continuous extract is required. The multi-spigot design offers the installer greater flexibility when choosing where to site the unit and also due to the spigot configuration, allows any ducting to be connected from any direction, therefore reducing airflow restriction and noise. The unit is suitable for either horizontal or vertical installation. The Xplus 2 has 1-125mm discharge spigot to atmosphere and up to 6-125mm spigots from the dwelling, depending on the total volume required. 3 blanking plates are also supplied. FW X-Range accessories such as Profile 60 rectangular flat duct together with 125mm rigid and flexible insulated/ uninsulated ducting can be used in conjunction with the Xplus 2 unit to provide a complete ventilation system.
Xplus 2 Reference number Motor type Maximum extract performance (FID, m3/h) Maximum extract performance (m3/h @100Pa) Maximum system pressure (Pa) Power usage maximum (W) 220-240V AC 50-60Hz Speed 1/2/3/4 Specific fan power (W/l/s) Speeds Speed control type Noise (dB(A)@3m) Number of intake spigots Number of exhaust spigots Spigot diameter (mm) Colour Installation orientation Body material Weight (kg) Guarantee (years, UK) Speed 1/2/3/4 Speed 1/3 DV200003 AC 471 382 400 13.4/23.9/35/58.2 0.31/0.44 4 Capacitor loading by selected value 20.1/30.7/37.1/45.1 6 1 125 Blue Vertical or horizontal Plastic 4.95 2
SUPERLITE - DOMESTIC
184
DOMESTIC
Performance Data
Pa 0 25 50 75 100 125 150 175 200 250 275 300 Speed 1 155 73 Speed 2 237 187 122 85 Speed 3 329 293 263 242 187 155 133 105 57 10 Speed 4 471 447 421 401 382 366 346 325 308 266 243 205
1 2 3 4
Controller Options
Model
SUPERLITE - DOMESTIC
185
DOMESTIC
Dimensions
Xplus 2 (AC)
125
190
510
480
SUPERLITE - DOMESTIC
186
DOMESTIC
Notes
SuperLite - XIM
SUPERLITE - DOMESTIC
187
DOMESTIC
SuperLite - XIM
Easily accessible terminal box P lastic construction will not deteriorate in high humidity conditions
A ll models supplied with convenient installation mounting cradle L ubricated for life, maintenance free motors with thermal cut-out protection I PX4 rated (except XIM100 and XIM100T - IPX2 Rated)
THE RANGE Traditionally centrifugal ducted systems have been bulky and noisy. Well not any more. The new low profile FW X-Range XIM units provide plenty of useable power for domestic ducted applications and save on space too. The models in the range are ideal for ducted applications where space is limited, such as in bathrooms, shower rooms, kitchens and other internal rooms without opening windows. Available in four sizes, the new FW X-Range XIM range of plastic mixed flow units offers duties for a wide range of ducted applications. They are dimensionally smaller than centrifugal units and with lower sound levels these units can often eliminate the need for a silencer. Larger units have two speeds. All models come complete with a convenient mounting cradle which makes installation or subsequent inspection simple. The terminal box is easily accessible simplifying the electrical connection. XIM units are either IPX2 or IPX4. Those rated IPX4 can be used in wet room ducted applications. Their plastic construction will not deteriorate in high humidity conditions. They are double insulated and suitable for operation on a supply voltage 220 - 240V 50Hz. All motors are maintenance free with greased for life bearings, and have safety overload protection.
KEY FEATURES Type: Inline one or two speed mixed flow extract fans Application: Domestic bathrooms, utility rooms, shower rooms and kitchens Control options: Standard or timer Legislation: Conforms to Building Regulations Part F1
XIM100 Reference number Speeds Remote switch (supplied separately) Integral timer (adjustable up to 15 mins) Max. extract performance (FID m3/h) Min. extract performance (FID m3/h) Max. extract performance (FID l/s) Min. extract performance (FID l/s) Max. sound pressure level (dB(A)@3m) Max. electrical power rating (W) Duct size (mm) IP rating Weight (kg) Guarantee (years, UK) 14 25 100 IPX2 1.2 2 21 77 DV40001 1
XIM100T DV40002 1
XIM125 DV40003 2
XIM150 DV40004 2
XIM150T DV40005 2
XIM200 DV40006 2
77 265 198 21 74 55 14 25 100 IPX2 1.2 2 25 25 125 IPX4 2.1 2 476 358 132 99 39 80 150 IPX4 3.2 2
476 358 132 99 39 80 150 IPX4 3.2 2 845 599 235 166 39 75 200 IPX4 4.5 2
SUPERLITE - DOMESTIC
188
DOMESTIC
SuperLite - XIM
Performance Data
Models
XIM100 Ref. DV400001 Single speed inline fan Mixed flow impeller/guide vanes Integral mounting cradle Rated as IPX2 XIM150 Ref. DV400004 2 speed inline fan Mixed flow impeller/guide vanes Plastic construction Integral mounting cradle Rated as IPX4
SUPERLITE - DOMESTIC
S ingle speed inline fan with adjustable overrun timer from 3-15mins Timer located in the terminal box Triggered by lighting circuit Mixed flow impeller/ guide vanes Integral mounting cradle Rated as IPX2 XIM125 Ref. DV400003 2 speed inline fan Mixed flow impeller/guide vanes Integral mounting cradle Rated as IPX4
XIM150T Ref. DV400005 Adjustable overrun timer from 3-15mins 2 speed inline fan Timer located in the terminal box Timer triggered by lighting circuit Mixed flow impeller/guide vanes Integral mounting cradle Rated as IPX4
XIM200 Ref. DV400006 2 speed inline fan Mixed flow impeller/guide vanes Integral mounting cradle Rated as IPX4
Controller Options
Change Over Switch COS Ref. DV900016 Provides High-Low speed operation Surface or recess mounting 85 x 85mm
189
DOMESTIC
SuperLite - XIM
Dimensions
XIM100/125 XIM150/200
SUPERLITE - DOMESTIC
190
DOMESTIC
SUPERLITE - DOMESTIC
191
DOMESTIC
T he GX range has an electro thermal shutter cassette W all mounting kits are available for all three models
THE RANGE Tried and tested, the GX6, GX9 and GX12 window fans have remained a byword for commercial window fans for over forty years. The latest GX range is no exception continuing that reputation for rugged reliability, whilst introducing a host of refinements to make the range safer, faster to install and easier to clean. Now supplied with longer ladder strips. The contoured high gloss white housing is styled to blend in cleanly with modern dcor. A shadow grey external grille is supplied for unobtrusive external appearance. For safety, a finger guard is integrated into the housing and the window grille design. On GX9 and GX12 range units, a tamper proof positive plug and socket assembly provides a means of isolation for service access without the safety risk of accidental disconnection. Installation in single and sealed double glazed windows (up to 25mm) is rapid using unique metal ladder strip/screw system, ensuring a secure and watertight seal against the glass.
GX6 Reference number Remote switch (supplied separately) Selectable intake, extract or controller operation Speeds Extract performance (FID, m3/h) high low Extract performance (FID, l/s) high low Intake performance (FID, m3/h) high low Intake performance (FID, l/s) high low Sound pressure level (dB(A)@3m) high low Max. electrical power rating (W) Hole diameter (mm) Hole diameter with wall liner (mm) Weight (kg) Guarantee (years, UK) 37 1 266 74 DV300011 GX9 DV300014 2* 728 618 202 172 456 412 127 114 50 48 41 257 266 4 3 GX12 DV300001 2* 1614 1214 448 337 1002 819 278 228 55 50 85 324 330 7.9 3
Running costs are impressively low, and when not in use the silent electrothermal shutter cassette closes silently against backdraughts. And cleaning has never been easier. The housing, shutter cassette and impeller are all removed in seconds.
Type: Commercial duty ventilation unit Application: Pubs, restaurants, offices, kitchens, factories, schools and shops Control options: Extensive range of optional controllers available Legislation: Conforms to Building Regulations Part F1 Hole Diameter: 184mm 257mm 324mm 203mm 266mm 330mm (GX6 window) (GX9 window) (GX12 window) (GX6 wall) (GX9 wall) (GX12 wall
* Low speed only applies if fan used with FR22/30 controller. If controller not used fan is only single (high) speed
Both the GX9 and GX12 ranges are reversible and now feature totally enclosed external rotor motors providing constant volume outputs, even in gusty external conditions. Prebalanced sickle bladed impellers eliminate fan judder and ensure quiet trouble free operation. Sealed for life maintenance free bearings ensure suitability for running at any angle.
SUPERLITE - DOMESTIC
192
KEY FEATURES
DOMESTIC
Performance Data
Models
GX6 Ref. DV300011 6 high performance extract axial ventilation unit Operated by remote On/Off switch (not supplied) Suitable for single and sealed double glazing windows and panels up to 25mm Sealed for life maintenance free bearings, suitable for running at any angle. Integrated safety thermal overload protection Built-in silent action electro-thermal shutter cassette Passive tricklevent facility for background ventilation with fan Off Easy clean high gloss ABS housing with integral finger safety guard Shadow grey external grille for unobtrusive external appearance Unique metal ladderstrip/screw connection to external grille for security and weathertight seal IPX4 rated motor GX9 with sickle blade Ref. DV300014 GX12 with sickle blade Ref. DV300001 High performance intake/extract axial ventilation unit Choice of optional controllers Suitable for single and sealed double glazing windows and panels up to 25mm Balanced external rotor motor and sickle blade impeller for quiet efficiency Sealed for life maintenance free bearings,suitable for running at any angle Built-in silent action electro-thermal shutter cassette Passive tricklevent facility for background ventilation with fan Off Easy clean high gloss ABS housing with integral finger safety guard Shadow grey external grille for unobtrusive external appearance Tamperproof internal connection safety plug and socket Unique metal ladderstrip/screw connection to external grille for security and weather tight seal IPX4 rated motor
SUPERLITE - DOMESTIC
Controller Options
Single Fan Controller FR22/30 Ref. DV900018 For use with GX9 and GX12 On/Off control with neon indicator. Used to select between high and low speed, intake and extract Group Fan Controller EC6H Ref. DV900017 For use with GX9 and GX12 On/Off control with neon indicator. Infinitely variable speed selection controls extract and intake air flow. For use with up to four fans (not mixed sizes) Group Fan Controller XCC1 Ref. DV900021 For use with GX9 and GX12 On/Off control with neon indicator
193
DOMESTIC
Dimensions
GX6 GX9 GX12
H 32 32 32
J 4 - 35 4 - 35 4 - 35
GX9 unit can be used for a variety of medical and photographic applications where light protection is required by replacing the external grille with a Darkroom Cowl.
Window Mounting Hole diameter: 184mm (GX6) 257mm (GX9) 324mm (GX12)
Darkroom Installation
SUPERLITE - DOMESTIC
194
GX6
GX9/GX12
DOMESTIC
SUPERLITE - DOMESTIC
195
DOMESTIC
T he PX range has an electro thermal shutter cassette Perfect for ceiling and panel applications Running costs are impressively low
THE RANGE The PX range introduces even greater flexibility into the design of commercial and larger domestic ventilation systems. Based on the proven WX range, PX fans are perfect for ceiling and panel applications in kitchens, restaurants, pubs, offices, schools, shops and kiosks. PX9 and PX12 fans are reversible making them ideal for ducted input systems in the hospitality industry. They feature totally enclosed external rotor motors providing constant volume outputs, even in gusty external conditions. Pre-balanced sickle bladed impellers eliminate fan judder and ensure quiet trouble free operation. Sealed for life maintenance free bearings ensure suitability for running at any angle. Running costs are impressively low, and when not in use the silent electro-thermal shutter cassette closes silently against backdraughts.
PX6 Reference number Remote switch (not supplied) Extract only Selectable intake, extract or controller operation Speeds Extract performance (FID, m3/h) high low Extract performance (FID, l/s) high low Intake performance (FID, m3/h) high low Intake performance (FID, l/s) high low Sound pressure level (dB(A)@3m) high low Ducting size (mm) Max. electrical power rating (W) Hole diameter (w x h mm) Spigot size (mm) Weight (kg) Guarantee (years, UK) 39 1 246 68 DV300002
PX9 DV300003
PX12 DV300004
KEY FEATURES Type: Commercial duty ceiling and panel mount axial ventilation unit
2* 790 685 219 190 458 433 127 120 50 47 250 41 345 x 375 250 4.7 2
2* 1712 1290 476 358 1037 845 288 235 54 48 315 85 434 x 434 315 7.9 2
Control options: Extensive range of optional controllers available Legislation: Conforms to Building Regulations Part F1 Hole Diameter: w246 x h268 (PX6) w345 x h375 (PX9) w434 x h434 (PX12) Duct Size: 200/250/315
* Low speed only applies if fan used with FR22/30 controller. If controller not used fan is only single (high) speed
SUPERLITE - DOMESTIC
196
Application: Pubs, restaurants, offices, kitchens, factories, schools, kiosks and shops
DOMESTIC
Performance Data
Models
PX6 Ref. DV3000002 High performance extract only axial flow ventilation unit Operated by remote On/Off switch (not supplied) Suitable for installation at any angle in ceilings, voids and wall panels of any thickness Totally enclosed motor Sealed for life maintenance free bearings, suitable for running at any angle Built in silent action electrothermal shutter cassette Ultra slim high gloss ABS fascia with integral safety finger guard PX9 with sickle blade Ref. DV300003 S ealed for life maintenance free bearings, suitable for running at any angle Built in silent action electrothermal shutter cassette Ultra slim high gloss ABS fascia with integral safety finger guard PX12 with sickle blade Ref. DV300004 H igh performance intake/extract axial flow ventilation unit Choice of optional controllers Suitable for installation at any angle in ceilings, voids and wall panels of any thickness Balanced external rotor motor and sickle impeller for quiet efficiency Sealed for life maintenance free bearings, suitable for running at any angle Built in silent action electrothermal shutter cassette Ultra slim high gloss ABS fascia with integral safety finger guard
SUPERLITE - DOMESTIC
H igh performance intake/extract axial flow ventilation unit Choice of optional controllers Suitable for installation at any angle in ceilings, voids and wall panels of any thickness Balanced external rotor motor and sickle impeller for quiet efficiency
Controller Options
Single Fan Controller FR22/30 Ref. DV900018 For use with PX9 and PX12 On/Off control with neon indicator. Used to select between high and low speed, intake and extract Group Fan Controller EC6H Ref. DV900017 For use with PX9 and PX12 On/Off control with neon indicator. Infinitely variable speed selection controls extract and intake air flow. For use with up to four fans (not mixed sizes) Group Fan Controller XCC1 Ref. DV900021 For use with PX9 and PX12 On/Off control with neon indicator
197
DOMESTIC
Dimensions
PX6
PX9
PX9
PX12
PX12
SUPERLITE - DOMESTIC
198
DOMESTIC
SUPERLITE - DOMESTIC
199
DOMESTIC
R X range has an electro thermal shutter cassette C an be used vertically in windows on exposed sites such as coastal areas and high rise buildings
THE RANGE With commercial wall space at a premium, sometimes the only way is up! FW X-Range RX models are a neat way of ventilating through glazed and solid roofs and can be used vertically in windows on exposed sites such as coastal areas and high rise buildings. The commercial duty roof fans are particularly suitable for pubs, restaurants, offices, kitchens, factories, and squash courts, schools in areas like changing rooms, and kiln rooms and a wide range of shops. The contoured high gloss white housing is sleekly styled. For safety, a finger guard is integrated into the ultra slim high gloss ABS fascia. The UV stabilised roof cowl assembly is a generous size to provide weather protection at all angles. They are suitable for single and sealed double glazed windows and panels up to 25mm. Installation in wire cast and sealed double glazed roof lights is rapid using unique metal ladderstrip and screw system, ensuring a secure and weather-tight compression seal. For flat roofs an optional roof mounting plate allows RX models to be fitted to dressed curbs. Both the RX9 and RX12 are reversible. All models offer a passive trickle vent option for background ventilation when the fan is off. On RX9 and RX12 units a positive plug and socket assembly provides a means of isolation for service access without the safety risk of accidental disconnection.
RX6 Reference number Remote switch (not supplied) Extract only Selectable intake, extract or controller operation Speeds Extract performance (FID, m3/h) high low Extract performance (FID, l/s) high low Intake performance (FID, m3/h) high low Intake performance (FID, l/s) high low Sound pressure level (dB(A)@3m) high low Electrical power rating (W) Hole diameter (mm) Max wall thickness (mm) Weight (kg) Guarantee (years, UK) 39 1 206 57 DV300005 2* 511 430 142 119 438 384 122 107 52 49 41 257 25 4.5 3 2* 1100 807 306 224 915 709 254 197 56 48 87 324 25 7.9 3 RX9 DV300006 RX12 DV300007
KEY FEATURES Type: Commercial duty roof mount axial ventilation unit with roof cowl Application: Pubs, restaurants, offices, kitchens, factories, squash courts, schools and shops Control options: Extensive range of optional controllers available Legislation: Conforms to Building Regulations Part F1 Hole Diameter: 184mm (RX6) 257mm (RX9) 324mm (RX12)
35 184 25 3.8 3
* Low speed only applies if fan used with FR22/30 controller. If controller not used fan is only single (high) speed
SUPERLITE - DOMESTIC
200
RX9 and RX12 models feature totally enclosed external rotor motors providing constant volume outputs, even in gusty external conditions. Prebalanced sickle bladed impellers eliminate fan judder and ensure quiet trouble free operation. Sealed for life maintenance free bearings ensure suitability for running at any angle. Running costs are impressively low, and when not in use the silent electrothermal shutter cassette closes silently against backdraughts. And cleaning has never been easier. The housing, shutter cassette and impeller are all removed in seconds. Running costs are impressively low, and when not in use the silent electrothermal shutter cassette closes silently against backdraughts. And cleaning has never been easier. The housing, shutter cassette and impeller are all removed in seconds.
DOMESTIC
Performance Data
Models
RX6 Ref. DV300005 High performance extract only axial flow ventilation unit Operated by remote On/Off switch (not supplied) Suitable for single and sealed double glazed windows and panels up to 25mm Built in electrothermal shutter cassette Passive trickle vent option for background ventilation with fan Off Easy clean high gloss ABS housing Roof cowl assembly in UV stabilised material provides weather protection at all roof angles Unique metal ladderstrip/screw connection to external grille for security and weathertight seal Supply voltage 220-240V 50Hz RX9 Ref. DV300006 RX12 Ref. DV300007 H igh performance intake/extract axial flow ventilation unit Balanced external rotor motor and sickle bladed impeller for quiet efficiency Choice of optional controllers Tamper-proof internal connection safety plug and socket
SUPERLITE - DOMESTIC
Controller Options
Single Fan Controller FR22/30 Ref. DV900018 For use with RX9 and RX12 On/Off control with neon indicator. Used to select between high and low speed, intake and extract Group Fan Controller EC6H Ref. DV900017 For use with RX9 and RX12 On/Off control with neon indicator. Infinitely variable speed selection controls extract and intake air flow. For use with up to four fans (not mixed sizes)
201
DOMESTIC
Dimensions
RX6, RX9, RX12
J 4 - 35 4 - 35 4 - 35
Kerb Mounting Hole diameter: 184mm Installation Accessories Roof Mounting Plate Ref. DV900050 Kerb detail see commercial
Kerb Mounting Hole diameter: 257mm (RX9) 324mm (RX12) Installation Accessories Roof Mounting Plate Ref. DV900051 Kerb detail see commercial
Model RX6 RX9 RX12 W (min) 152 152 152 X 76 76 76 Dimensions (mm) Y 527 711 711 Z 375 559 559 D hole 184 257 324
SUPERLITE - DOMESTIC
202
DOMESTIC
SUPERLITE - DOMESTIC
203
DOMESTIC
safe lock metal telescopic wall liner Electro thermal Shutter Cassette Running costs are impressively low
THE RANGE WX ventilation units the classic face of commercial wall fans. Discretely slim, tough and reliable within a winning formula that has served generations of pubs, businesses and local authorities. Stylish commercial duty unit ventilation designed for pubs, restaurants, offices, kitchens, factories, schools and shops. Suitable for single, cavity brick and current timber frame walls. The wall hugging, low profile white fascia is styled to blend in cleanly with commercial surroundings. For safety, a finger guard is integrated into the Ultra slim high gloss ABS fascia and the exterior wall grille design. On WX9 and WX12 units a positive plug and socket assembly provides a means of isolation for service access without the safety risk of accidental disconnection. All WX models come complete with a wall mounting kit which include a wall liner. Pre-balanced sickle bladed impellers eliminate fan judder and ensure quiet trouble free operation. Sealed for life maintenance free bearings ensure suitability for running at any angle. Running costs are impressively low, and when not in use the silent electro-thermal shutter cassette closes silently against backdraughts. And cleaning has never been easier. The housing, shutter cassette and impeller are all removed in seconds.
WX6 Reference number Remote switch (not supplied) Integral adjustable run-on timer (2 to 20 mins) Extract only Selectable intake, extract or controller operation Speeds Extract performance (FID, m3/h) high low Extract performance (FID, l/s) high low Intake performance (FID, m3/h) high low Intake performance (FID, l/s) high low Sound pressure level (dB(A)@3m) high low Electrical power rating (W) Hole diameter (mm) Max wall thickness (mm) Weight (kg) Guarantee (years, UK) 39 1 246 68 DV300008
WX9 DV300009
WX12 DV300010
2* 783 663 248 184 477 437 133 121 50 47 41 345 x 375 508 4.7 3
2* 1715 1162 476 179 969 815 269 226 54 48 85 434 x 434 522 8.3 3
KEY FEATURES Type: Commercial duty ventilation unit Application: Pubs, restaurants, offices, kitchens, factories, squash courts, schools and shops Control options: Extensive range of optional controllers available Legislation: Conforms to Building Regulations Part F1 Hole Diameter: w245 x h268 WX6 w345 x h375 WX9 w434 x h434 WX12
*Low speed only applies if fan used with FR22/30 controller. If controller not used fan is only single (high) speed
Both the WX9 and WX12 are reversible and now feature totally enclosed external rotor motors providing constant volume outputs, even in gusty external conditions.
SUPERLITE - DOMESTIC
204
DOMESTIC
Performance Data
Models
WX6 Ref. DV300008 High performance extract only axial flow ventilation unit 6 high performance extract axial ventilation unit Suitable for single, cavity brick and current timber frame walls Sealed for life maintenance free bearings, suitable for running at any angle. Integrated safety thermal overload protection Built-in silent action electrothermal shutter cassette Passive tricklevent facility for background ventilation with fan Off Ultra slim high gloss ABS facia with integral finger safety guard Shadow grey external grille for unobtrusive external appearance with built-in weather protection IPX4 rated motor WX9 Ref. DV300009 WX12 Ref. DV300010 High performance intake/extract axial ventilation unit Choice of optional controllers Suitable for single, cavity brick and current timber frame walls Balanced external rotor motor and sickle bladed impeller for quiet efficiency Sealed for life maintenance free bearings, suitable for running at any angle Built-in silent action electro-thermal shutter cassette Passive tricklevent facility for background ventilation with fan Off Ultra slim high gloss ABS facia with integral finger safety guard Shadow grey external grille for unobtrusive external appearance with built-in weather protection Tamperproof internal connection safety plug and socket IPX4 rated motor
SUPERLITE - DOMESTIC
Controller Options
Single Fan Controller FR22/30 Ref. DV900018 For use with WX9 and WX12 On/Off control with neon indicator. Used to select between high and low speed, intake and extract Group Fan Controller EC6H Ref. DV900017 For use with WX9 and WX12 On/Off control with neon indicator. Infinitely variable speed selection controls extract and intake air flow. For use with up to four fans (not mixed sizes) Group Fan Controller XCC1 Ref. DV900021 For use with WX9 and WX12 On/Off control with neon indicator
205
DOMESTIC
Dimensions
WX6
WX9
WX12
WX6/WX6T
WX9/WX12
Wall Mounting Hole diameter: w345 x h375mm (WX9) w434 x h434mm (WX12)
SUPERLITE - DOMESTIC
206
INFO
Notes
CONTENTS Page
Fan Laws 208 Pressure 208 Absorbed Power 208 Air Density 208 Fume Removal 209 Conversion 209 Motor Enclosures - Degrees of Protection 210 Air Changes Per Hour 210
207
INFO
Fan Laws
Speed change constant size constant density Volume Flow Pressure (Static, Dynamic and Total) Power Absorbed
Size change constant speed constant density (For geometrically similar fans only) Volume Flow Pressure (Static, Dynamic and Total) Power Absorbed
Density change constant speed constant size Volume Flow Pressure (Static, Dynamic and Total) Power Absorbed = No change
Density Density
The laws can be combined where simultaneous changes in size, speed and density are required.
Pressure
It is possible to convert from Total Pressure (PF) to Static Pressure (PsF) using the following equation(s): Total Pressure (PF) = Static Pressure (PsF) + Dynamic Pressure (PdF) and Static Pressure (PsF) = Total Pressure (PF) Dynamic Pressure (PdF)
outlet area (m2). This can be calculated using: Dynamic Pressure (PdF) = 0.5r V2 (Pa) Where r V = Air Density (kg/m3) (Standard is 1.2 kg/m3) = Air Velocity (m/s)
d2
Absorbed Power
Volume flow (m3/s x Total Pressure (Pa) Absorbed Power = kW Total Efficiency x10
Air Density
Standard Air density is 1.2kg/m3 One condition that gives Standard Air is: 16C, 100 hPa barometric pressure, 65% relative humidity. Change due to temperature New Density = 273 + Old Temperature C Old Density x 273 + New Temperature C
{ {
} }
kg/m3
Change due to altitude New Density = Old Density x 288 0.00649 H 288 4.256 kg/m3
Dynamic Pressure (PdF) is also known as Velocity Pressure (Pv) and this is a function of Volume Flow (qv) and fan
INFO
IP44
Protection against contact with live or moving parts of tools, wires or other objects of thickness greater than 1mm Protection against the ingress of solid foreign bodies with a diameter greater than 1mm
Water splashed against the motor from any direction shall have no harmful effect
IP55
Complete protection against contact with live or moving parts inside the enclosure. Protection against harmful deposits of dust. The ingress of dust is not totally prevented, but dust cannot enter in an amount sufficient to interfere with satisfactory operation of the machine
Water projected by nozzle against the motor from any direction shall have no harmful effect IP55 as despatched. Drain holes are incorporated such that by removing the appropriate plugs all-weather protection can be provided and condensation build-up prevented Motor protected against conditions on a ships deck
IP56
Assembly Halls Bakeries Banks Bathrooms Bars Boiler Houses Cafs Canteens Churches Cinemas* Classrooms Cleaners Dance Halls Domestic Kitchens Dyers Engine Rooms Foundries Furnace Rooms Garages Hospital Wards Hospital Treatment Rooms Kitchens for Restaurants Laboratories Laundries Libraries Offices Paint Shops Residences Restaurants* Storage Areas Swimming Baths Theatres* Workshops *G eneral requirements are 28m /h per person minimum in public places; more if smoking is allowed D ependent on height of building and nu mber of persons
x 25.4
= mm
x 0.454 = kg
or ft /min
3
x x
0.000472 = 249.1 =
m /s
3
in. wg
Pa
209
INFO
Fume Removal
Recommended minimum velocities across face of extract hood: Sandblast Booths Sandblast Booths Electro-Plating Electric Welding Paint Spray Booths Kitchen Equipment 2.5m/s openings 0.4m/s downwards through booth 0.75-1.0m/s openings 0.5-1.0m/s 0.75m/s in breathing zone 0.5-0.75m/s
Conversion
The Flkt Woods Group is divided into three businesses: Global Infrastructure and Industry (GII) A leader for Air Movement using fans to improve performance of equipment and industrial processes Air Climate Solutions (ACS) A worldwide HVAC leader recognized by our customers as a provider of superior Air Climate Solutions combining Indoor Air Quality and Energy Efficiency applied to specified buildings Ventilation Solutions (VS) A European Ventilation Specialist Servicing our customers with a Complete range of ventilation products focused on Non residential buildings. For more specific product information for Ventilation Solutions, please visit:
www.vsecatalogue.flaktwoods.com
Flkt Woods Group - Ventilation Solutions
Flkt Woods Limited Axial Way, Colchester Essex C04 5ZD UNITED KINGDOM Tel: +44 (0)1206 222 555 E-mail: info.uk@flaktwoods.com Flkt Woods Oy Kalevantie 39 FI-20520 Turku FINLAND Tel: +358 20 442 3000 E-mail: info.fi@flaktwoods.com Flkt Woods Oy Hmeentie 23 FI-37800 Toijala FINLAND Tel: +358 20 442 3500 E-mail: info.fi@flaktwoods.com Flkt Woods AB Kung Hans Vg 12 2tr 192 68 Sollentuna SWEDEN Tel: +771-26 26 26 E-mail: info.se@flaktwoods.com Flkt Woods AB Flktvgen 2, Box 84 153 22 Jrna SWEDEN Tel: +8-551795 00 E-mail: info.se@flaktwoods.com Flkt Woods AB Gesllgatan 17 745 39 Enkping Sweden Tel: +46 36 19 30 00 E-mail: info.se@flaktwoods.com Airchal - A Flkt Woods Company 4 Avenue Laurent CELY-Batiment C - Etage 3 Asnieres Sur Seine 92600 FRANCE Tel: +33 1 80 21 07 00 E-mail: info.fr@flaktwoods.com Flkt Woods Ventilatoren GmbH Am Sportplatz 4 DE-40882 Ratingen GERMANY Tel: +49 2012 61038 11 E-mail: info.de@flaktwoods.com Flkt Bovent Sp. z o.o. Panattoni Park Pruszkw II ul. Poudniowa 2, Otarzew 05-850 Oarw Mazowiecki POLAND Tel: +48 22 392 43 43 E-mail: info.pl@flaktwoods.com LLC Flakt Industrial & Building Systems 23, ul. Profsojuznaya RU-117418 Moscow RUSSIA Tel: +7 (495) 589-31-08 E-mail: info.ru@flaktwoods.com Flkt Woods SpA Via Pacinotti, 28 IT-20092, Cinisello Balsamo ITALY Tel: +39 02 6186 6091 E-mail: info.it@flaktwoods.com
Flkt Woods operates a policy of continuous improvement and reserves the right to supply products that may differ from those illustrated and described in this publication. Certified dimensions can be supplied on request on receipt of order.