Professional Documents
Culture Documents
Gainesville, VA 20155 703.989.5971 pkoump@hotmail.com LinkedIn URL: http://www.linkedin.com/in/peterkoump/ Clearances TS/SCI issued by DOD SSBI 20091026, TS 20100930 With CI Poly.
ELECTRICAL ENGINEER
Professional Summery: Design and develop embedded systems based on microprocessors and microcontrollers. Develop FPGA designs for digital circuit cards. Design circuit cards for VME and PCI based systems. Summary: Hardware Engineer Designed microprocessor based embedded systems, and worked on EGSE Test hardware to test flight hardware. Designed circuit cards and FPGAs for high reliability space flight programs. Designed VME and PCI circuit boards. Able to work independently and as a team member. Has worked on Commercial, Defense, and Space electronics. Designed space qualified cables, wrote cable test and verification procedures. Debugged analog circuit cards. Competencies: Circuit card, and FPGA development. Developed FPGAs using Actel, Altera and Xilinx ICs with VHDL . C/C++ software development and assembler experience. Debugged microcontroller systems using incircuit emulators, logic analyzers and oscilloscopes. Used ModelSim for simulation. Developed Circuit boards for high reliability satellite systems. Used Hyperlynx for signal integrity analysis of circuit boards. PROFESSIONAL EXPERIENCE Orbital Sciences Corporation, Dulles, VA (06/2008 03/2013) Senior Principal Engineer Developed test stations, and Space hardware. Oversaw integration into spacecraft. Electrical Systems Engineer - Defined, Developed, and tested embedded systems. - Develop digital and mixed logic circuit cards for satellite communications and mixed I/O. - Provide for spacecraft telemetry gathering and processing. - FPGA development- PCI Master and Target, and mixed I/O logic FPGAs developed in VHDL. - Master FPGA based on Actel 54SX72A and Target based on Actel 54SX32A - PCB Board Development, definition, debug and verify CCA. - Developed cPCI based backplane - Designed space qualified cables and wrote test procedures for space qualified cables. - Created engineering drawing and technical documentation. - Provided hardware support for developed hardware for ongoing software development. Spacecraft Avionics Engineer - Designed and wrote test procedures for space qualified cables. - Design, analyze, document and qualify, integration and test of spacecraft components and subsystems. - Developed IO Interfaces for command and data handling of computer systems (RS-422 and others). - Architected spacecraft MIL-STD-1553B Bus - Definition and development of ground support equipment for testing and integration of spacecraft electrical systems. - Approval and release of documents and drawings for space craft hardware and Ground Support Equipment through Configuration Management software. - Authoring test plans, safe to mate procedures and certifications procedures for Circuit cards, test equipment, and space qualified hardware. - Developed EGSE equipment for testing and verifying space hardware. - Verifying Avionics components in standalone bench testing, environmental testing , and during Spacecraft integration and test. - Conducted EMI testing on spacecraft electronics. - Created and updated documentation with Engineering Change Orders