Professional Documents
Culture Documents
Projection Of Points 1. Point A is 25 mm above HP, 20 mm In front of VP. Draw the projections of A. 2. Draw the projections of the following points on a common reference line. i. P,30 mm AHP (Above HP), 10 mm IFVP (In front of VP). ii. Q, 20mm AHP, In VP iii. R, In HP & 15mm IFVP iv. S, On HP & VP v. T, 20mm from both reference planes and in first Quadrant. 3.
Projection Of Straight Line * Simple Cases 1. A Line AB 50mm long has its end A 15 mm AHP &20mm IFVP. Line is kept parallel to both planes. Draw its front & top view. 2. Line PQ : 55 mm long which is kept Perpendicular to HP & Parallel to VP . Point P is 10 mm AHP & 25 mm IFVP. 3. AB : 50mm , Perpendicular to VP , Parallel to HP A : 15 mm AHP , 25 mm IFVP. 4. PQ : 50mm , Inclined 400 to HP & Parallel to VP P : 10 mm AHP , 15 mm IFVP 5. MN : 45mm , Inclined 300 to VP & Parallel to HP N : In HP , 15 mm IFVP 6. A Line AB 70 mm long has its end A 15 mm above HP & 25mm In front Of VP. Its plan has a length of 40mm. Draw its projections and find its inclinations with Horizontal Plane. (Ans: 550 with HP ) * Inclined to Both HP & VP .( Rotating Line Method ) 1. A Line AB 80 mm long has its end A 20 mm above HP and 25 mm in font of VP. The line is inclined at 450 to HP and 350 to VP. Draw its Projections. 2. A Line AB 80 mm long is kept such that it makes an angle of 45 0 with HP & 300 with VP. End A is 20 mm away from both reference planes and it is in I Quadrant. Draw the projections of the line 3. A line AB 65 mm long has its end A 25 mm above HP and 15 mm in front of VP. The line is inclined at 350 to HP and 550 to VP. Draw its projections. ( + = ? ) 4. A Line AB 75 mm long has its end A in Both HP & VP. Line is kept inclined at 45 0 to HP & 300 to VP. Draw its projections. 5. A line AB 70 mm long has its end A 35mm AHP & 30 mm IFVP. The top view & FV has a length of 45 mm, 60 mm respectively. Draw its projections and find inclinations of TL with HP & VP. ( =500,=310) 6. One end of P of a line PQ 80 mm long is 25 mm AHP, 20mm IFVP. Line is inclined at 35 0 to VP. Its Top view has a length of 50 mm Draw the projections find True inclinations with HP.( =510)