You are on page 1of 3

Individual Homework #12 Design and Analysis of Experiments 5.

When the mean of yield vs Temperature (left panel) shows that yield is increased as temperature increases and pressure 215 psig shows the best yield in general. The fact that the pressure at the different levels are not strictly parallel says that there is an interaction between temperature and pressure. The right panel (yield vs Pressure) shows that pressure 215 psig has the highest yield and also that the lines are not parallel and therefore interaction between temperature and pressure is predicted.

5.9

The plot of thrust vs drillspeed (left panel) shows that the trusth force develop increases as the drill speed increases from 125 to 200 for all the levels of feed rate. Feed rate levels 4 and 1 are parallel as the drill speed increases so no interaction between feed speed (levels 4 and 1) do not interact with drill speed. On the other hand, feed rate levels 4, 3 nd 2 are not parallel and some interactions between these levels and the drill speed is expected. The right panel (trust forve vs feed rate) shows that the trust force increses as the feed rate increases. Both levels of drill speed 200 and 125 are not parallel and thus interaction between drill speed at both levels and feed rate is expected.

You might also like