Professional Documents
Culture Documents
The Watts Model LF07S Residential Fire Sprinkler Dual Check Backflow Preventer is designed for non-health hazard [i.e., pollutant] application on potable fire sprinkler service connections to protect against possible backsiphonage conditions that could inadvertently drain the fire sprinkler system.
Approvals - Standards
Please consult Local Governing Code for proper installation and agency code requirements, Sizes Applicable: 1" Only
B64.6 2" LF07SU2-2
Specifications
The Lead Free* Dual Check Valve Backflow Preventer shall be ASSE Listed 1024 and be UL Classified. The main body shall be Lead Free* brass featuring replaceable seats and silicone seat discs. The check assemblies shall have captured springs to prevent injury. The Dual Check Valve shall be a Watts Model LF07S.
ANSI/NFPA 13, 14, 15, 20, 22, and 24 Compliant All Sizes Applicable End Connections National Pipe Thread Taper ANSI B1.20.1
Material Specifications
Body: Lead Free* Brass Elastomers: Silicone O-Rings: EPDM or Buna N Check Modules: Engineered Plastics Springs: Stainless Steel
Pressure - Temperature
Max. Working Pressure: Min. Working Pressure: Hydrostatic Test Press: Temperature Range: 175psi (12.1 bar) 112" & 2" 160psi (11.03 bar) 1" & 114" 10psi (0.69 bar) 700psi (48.3 bar) 33F to 140F (0.5C to 60C) 1" & 114" 33F to 180F (0.5C to 82C) 112" & 2"
Typical Installation
The Model LF07S is typically installed for service on residential fire sprinkler systems. It is recommended this device is installed after a water meter and/or isolation shutoff valve with installation techniques that comply with the latest edition of the Uniform Plumbing Code. Please consult Local Governing Code for proper installation and agency code requirement.
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Configurable Options
The Model LF07S is standardly supplied with National Pipe Thread Female [NPT] union inlet & Female [NPT] outlet connection.
Capacity
1" (25mm) LF07S
16.0 14.0 12.0
Rated Flow
10.0
Meter Thread Female Meter Thread Male National Pipe Thread Male National Pipe Thread Female
4 5 3 2
1" & 114" (25 & 32mm) 1" & 114" (25 & 32mm) 1" & 114" (25 & 32mm) 1", 114", 112" & 2" (25, 32, 40 & 50mm)
U U U
2 4 2
2 2 2
Dimensions Weights
0.0 0.0 20.0 40.0 60.0 80.0 100.0 120.0 140.0 0.0 75 151 227 303 379 454 530 9.0 818.1
Rated Flow
LF07S
SIZE (DN) A in. mm in. mm in. Dimensions B mm in. C mm lbs. kgs. weight
1 114 112 2
25 32 40 50
71 71 93 93
2 2 21316 21316
50 50 71 71
NOTE: This information is not intended to replace the product installation and safety information available or the experience of a trained product installer. Please refer to the product installation and safety instructions for further information.
USA: Tel. (978) 688-1811 Fax: (978) 794-1848 www.watts.com Canada: Tel. (905) 332-4090 Fax: (905) 332-7068 www.watts.ca
ES-LF07S 1315
2013 Watts