Professional Documents
Culture Documents
NoViComp - Damped
Description
NoViComp is a lightweight metal sandwich plate consisting of 2 aluminum sheets bonded with a viscoelastic mastic layer. NoViComp offers very good airborne noise insulation and structural damping loss up to 20 dBa over plain solid metal sheet. NoViComp reflects sound energy back into machinery spaces and away from living accommodations. NoViComp's smooth surface is preferred over typical perforated plate to improve fire resistance, aesthetics and cleanability.
Noiseless Aluminum
SOUND TRANSMISSION AND VIBRATION CHARACTERISTICS Sound Transmission Class - ASTM E-90. Vibration damping loss factor - ASTM STP-378. Thickness Loss Factor @ 100 Hz STC Rating 2mm .060 25 3mm .280 28
Used for decoupling and isolation of interior and deck conGauged to support and isolate horizontal and vertical loads
from structure borne noise transmission.
Minimal long term compression set High chemical resistance Excellent choice for bedding of tanks and equipment pallets.
Provides Isolation, Damping , Barrier and Absorption Excellent underlayment for teak decks and stone floors Sandwich core in bulkhead and sole panels Laminate within FRP composite structure Easily cut with a razor knife or band saw Install using urethane adhesives. Fairly resistant to water, moisture, oil and fuel
Density 450 kg/m3 650 kg/m3 200 kg/m3 950 kg/m3 Color Black Brown Lt.Brown Black Shore-A 15-25 50-65 40-60 65-75 Elongation >30% > 15% > 15% > 100% Compressibility 50-60% 35-50% 20-35% 20-30%
Key Points
Used extensively in Superyacht interiors worldwide. Cost, Weight and Space effective acoustical solution
Sizes
3mm (1/8) , 4mm (3/16) , 6mm ( 1/4) , 9mm ( 3/8) Typical sheet size 1220mm x 2440mm ( 4 x 8 )
NoViPanel- A (Standard) NoViPanel- AA (High Transmission Loss) NoViPanel- D (Foam Core only)
Description
Ready-to-use laminated panels for interior
partitioning, floating floors and furniture joinery consisting of marine quality Water/Boil/Proof cover plates combined with foam or honeycomb core and acoustic barrier layers. Several types are available and have superior transmission loss and dampening as compared to standard plywood. The barrier core sheet is a flexible sound-absorbing sheet. The open-cell core structure in combination with a Urethane Type 1 resilient glue provides structural adhesive strength and sufficient flexibility to improve the acoustic properties. Panels can be veneered directly.
PolyCore
Polypropylene Honeycomb
Description
PolyCore polypropylene honeycomb cores unique cell structure has 3 orientations vs. 2 orientations common with other honeycomb, making its properties more uniform. Each cell has a tubular form and is inherently stable. PolyCore is supplied with or without a non-woven polyester veil for better bonding. It is also supplied with or without a film barrier under the polyester veil to limit the amount of resin consumption in Infused Resin applications.
- High Strength to Weight Ratio - Corrosion, Fungi, Rot Chemical, - - Moisture resistant. - Sound and vibration damping - Energy Absorbing - Thermoformable - Temperature use to 180 degF - Recyclable
Compression Strength Cell Size
Density
Compression Modulus
Shear Strength
Shear Modulus
Tensile Strength
HC48-5 HC48-4
0.30 0.40
5 pcf 4 pcf
75 psi 40 psi
Description
NoViFloor SonoPanels are widely used as floating sole and acoustic partition panels on board yachts. Other applications are as sheathing for sound enclosures, cockpit decking and floor panels in motor coach and rail transport. Applications.
4/4/4 (12mm) - 5.3 kg/m2 4/4/4 (12mm) 6.9 kg/m2 4/4/4 (12mm) 7.9 kg/m2 4/4/4 (12mm) 11.5 kg/m2
6/4/6 (16mm) 7.6 kg/m2 6/4/6 (16mm) 9.2 kg/m2 6/4/6 (16mm) 10.2 kg/m2 6/4/6 (16mm) 13.8 kg/m2
9/4/9 (22mm) 11.0 kg/m2 9/4/9 (22mm)- 12.6 kg/m2 9/4/9 (22mm)- 13.6 kg/m2 9/4/9 (22mm)- 17.2 kg/m2
ProMarine-640 and ProMarine-450 panels are supplied as a system to meet A, B and C-Class Shipboard Fire Divisions with a full selection of Fire Rated HPL or natural wood veneers. A complete range of install joining profiles and custom cutting to suit any shipboard or offshore platform requirement is available. ProMarine-640 and ProMarine-450 Are manufactured using autoclaved Calcium Silicate reinforced with selected minerals and fibers. The panels contain no asbestos. ProMarine-640 and the lighter weight ProMarine-450 have been successfully tested to IMO Res. A799 (19) and A754 (18). Both panel configurations also comply fully with the requirements of Marine Equipment Directive 96/98/EC (amended by Directive 98/95 and Directive 2001/53. Modules B&D and Type Approval. Certificates are available on request
Joiner Panels
ALVEDOOR
ALVEDOOR
ALVEDOOR
ALVEDOOR
ALVEDOOR
ALVEDOOR
ALVEDOOR
ALVEDOOR
ALVEDOOR
ALVEDOOR
B0, B15, B30, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B0, B15, B30, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding