Professional Documents
Culture Documents
Contents
Introduction Operation of Fuel Cells Chemistry of Fuel Cells Types of Fuel Cells: Polymer Electrolyte Membrane Fuel Cells (PEMFC) Direct Methanol Fuel Cells (DMFC) Phosphoric Acid Fuel Cells (PAFC) Molten Carbonate Fuel Cells (MCFC) Basic Components of Fuel Cell Vehicles: The Motor Transmission of Fuel Cell Vehicles AC Motor Controller Regenerative Braking Ultracapacitors Hydrogen Production Hydrogen Storage for Fuel Cell Vehicles Metal Bounded Hydrogen Storage Storing Hydrogen as Liquid Hydrogen Storage in Carbon Nanotubes Conclusion References
Introduction:
Fuel Cell is one of the emerging technologies with an immense potential to fill the energy gap created by oil shortages. It is the direct energy conversion process in which the chemical energy of fuel primarily hydrogen is converted to electrical energy. Fuel Cell takes oxygen from air and uses hydrogen as a fuel to generate electricity using an electrolysis process. In addition to this, it generates water and heat as by-products. According to energy experts, there is a great future for fuel cells and we may see fuel cells generating electrical power. It is much cleaner and environmental friendly power generation than many other conventional power processes. Fuel Cells are majorly used for three types of application that includes the transportation, stationary and portable power. Fuel Cells for large stationary power are bigger in size and have high working temperatures. They can produce power equivalent to current conventional power plants and can be used as load center for high electricity demands. The fuel cells for portable devices are reasonably extremely small that are used to power up small devices like cell phones, laptops, computers etc. Fuel cells for transportation can be small to medium sizes. They are installed under the hood of the vehicles along with other auxiliary devices that make up the whole fuel cell system. In my this research paper I will be focusing on the fuel cells that are used for the transportation system. Almost, in most cases the fuel cells used for the transportation are the Polymer Electrolyte Membrane or Proton Exchange Membrane fuel cells (PEMFC). Hydrogen is the commonly used fuel in the fuel cells. Besides, the hydrocarbons such as natural gas and methanol are also used as fuel. Fuel Cells seems similar to batteries as they both work on electrochemical process but the major difference is that in Fuel Cells the energy is produced while in the batteries the energy is stored in the chemical form. Fuel cells continue to produce electricity as long as the fuel is fed into the device. The idea of using Fuel Cell to produce electricity was put forwarded by a German Physicist Christian Fridrech Schnbein in 18381. Later NASA space programs made use
of fuel cells commercially to produce power for space vehicles. Afterwards, the fuel cells have been put in use to produce power for almost all kind of electricity consuming applications that includes residential, industrial and commercial. Due to the shortage of oil and its increasing prices, almost all the automotive companies are investing in fuel cell technology. Automotive sector takes a huge amount of oil resources that is expanding exponentially every year. Therefore, companies are looking for more sustainable process of transportation that could cater the future needs while also keeping the environmental problems in view as an important factor. Thus the fuel cell can be the most promising technology that could solve the transportation problems of the globe while also contributing positively to the environment. Since the fuel cell goes through the electrolysis process and it takes oxygen from air and hydrogen as fuel so it emits only water from exhaust tailpipe. Moreover, the conventional car use internal combustion engines, their efficiency are 20 percent to produce power and rest of the 80 percent of energy is lost and dumped into our environment as heat or thermal energy. Since, the engine uses heat from combustion of fuel to build up pressure and transforms that pressure to mechanical work through piston and crankshaft mechanism. The 80 percent of the heat is lost due to less efficient thermal efficiency. During this process heat is dumped into an atmosphere, which poses a great threat to our environment. This act as catalyst to radically change the standard parameters of nature resulting in climate change and global warming. As human beings on this planet it is highly preemptive to protect the surroundings and live sustainably while moving forward to future. Whereas, the fuel cells use electric motors that are fairly efficient up to 80 90 percent. In recent years there has been major breakthrough in this technology however, the future of this fuel cell technology still depends on many factors. Amongst those factors the production of hydrogen at economical level is the prominent one. Along-with that the infrastructure development, on-board fuel tank and on board fuel cell will determine the real future of this technology. There are different types of fuel cells being used in industry for commercial and residential purposes depending upon the type of the application. The most important
factor determining which of the fuel cell systems to be used for particular application depends on the temperature range. Fuel cells have the temperature range starting from 90 Celsius to 700 Celsius. Polymer Electrolyte membrane fuel cells (PEMFC) have the temperature range from 80 90 Celsius this makes it applicable to use it in fuel cell vehicles. It is easier to manage the heat in PEM Fuel cells. The fuel cells have typical configuration that have one electrolyte, two electrodes cathode and anode. Commonly, fuel cells are also classified according to the electrolytes as well.
Figure 1: This chart shows the development in fuel particularly in the areas of Hydrogen production and its storage before 2000 till 2012. Source: https://www1.eere.energy.gov/hydrogenandfuelcells/images/fct_graph_accelerating_commercializatio n.gif
With close analysis of the above figure, it can easily be predicted that the future of fuel cell is really bright. Since the year 2000, there has been a great progress made in this field and it is believed that this will continue to grow in future and the growth rate will be exponential. Therefore, it is high time for everyone involved in technological development sector to support this green technology and make our future more sustainable.
A fuel cell system works on the basis of electrochemical process that needs fuel, oxidant or air and coolant to maintain the working temperature of the fuel cell systems. Besides, it requires the proper pressure, flow rate of oxygen and fuel to regulate the systems according to standard operating conditions of the fuel cells systems. Therefore, alongwith the fuel cell stacks, the fuel delivery system, air system and humidification system is also installed to get the optimum level of energy from the fuel cells. As the fuel cells generate the power the must be inverted to required form of source which would be used to power a particular device. For example, the fuel cells generate power in direct current and that has to be converted to AC power through a DC to AC inversion system.
Positive charge ions flow through electrolyte from anode to cathode. Finally the electrons produced are passed through an external circuit powering up the device with direct electric current. 4. Molten Carbonate Fuel Cells (MCFC): Molten Carbonate Fuel Cells use mixture of hydrogen and carbon monoxide produced from water and fuel. Molten potassium lithium carbonate is used as electrolyte, which carries out the process of producing electricity at the temperature of about 650 degree Celsius6.
Figure 3: This shows the different fuel cell's fuel, electrolyte, and temperature range. Source: http://www.fuelcells.org/fuel-cells-and-hydrogen/types/
10
power demand of the vehicles. It also serves as actuator for the pedal control and sends information to the motor to produce require torque and power when a driver pushes the acceleration pedal. AC motor controller is also responsible for generating power from regenerative braking. When vehicle is applied brake to stop the heat generated in the wheel is transformed to DC power that is processed through AC Motor Controller. 4. Regenerative Braking: Regenerative braking is the process of braking a vehicle to complete without the loss of energy applied during the braking system. When the barking is applied to a vehicle the kinetic energy of vehicle is transformed to another form and stored to be used for later use. When a conventional vehicle applies brakes all the energy is transmitted to the heat and thermally dissipated. Since the motor can produce power and simultaneously can be used to generate power. As soon as the brake is applied the controller sends signals to the ultra capacitor that automatically connects to the generator (motor) to insert load on generator. The motor is connected to the wheels and when the ultra capacitor put load on the generator it start-generating power from braking as the wheels are still spinning. 5. Ultracapacitors: Ultracapacitors are used in fuel cell vehicles in addition to the batteries to store electrical power. When the power is produced from the regenerative braking it is generated in matter of few seconds and that power has to be immediately stored in some form. Batteries cannot store that power so fast; therefore, the ultracapacitors is the new technology, which has the answer to this problem. Ultracapacitors can store the fastgenerated electric power produced in extremely short time7. There are few advantages of ultracapacitors, which can challenge the batteries. First, the rate of storing the electrical energy is very high and secondly, the power density of the ultracapacitors is high too. This adds into the more power storage in a smaller sized storage as compared to the conventional batteries. Moreover, the ultracapacitors have higher life cycle and carries less weight8. This less weight can also improve in efficiency of the vehicle as motor has to do less amount of work to propel the lighter vehicle. In fuel cell vehicles, when regenerative power is produced the AC controller regulates the ultracapacitors to open the connection and connects with the motor. At this particular point the motor works as a generator in which, the generator is loaded that starts generating power and that power is
Fuel Cell Science & Technology ME 6580 transmitted and stored in ultracapacitors.
11
Figure
4:
Basic
operation
of
Fuel
Cell
Vehicles.
Process
Flow
and
Basic
Devices
used
in
the
Fuel
Cell
Source:
Sam
Glidden,
Jared
Delahanty
Graduate
Project,
Hydrogen
Fuel
Cell
Vehicles
The
Future
of
Transportation
As shown in this above figure, an overall working of the devices used in the fuel cell vehicles is presented. The green storage tanks in which, the hydrogen is stored or fed into it from the any source. Oxygen is taken from the air by the help of the air pump; afterwards, the air is filtered through filters to block any kind of additional particles.
12
Oxygen from air and hydrogen from the storage tank is allowed for the chemical reaction in the fuel cell stacks. Electricity is generated in the fuel cells and transmitted to AC controller and ultracapacitors simultaneously. Since the power produced by the Fuel Cell is in DC. Therefore, it is converted to the AC and passed to the AC motor which, further supplies power to the wheels through fixed gear drive. Also, there is another line going back to ultracapacitors through the AC controller. This line transmits power back to Ultracapacitors when generated during the regenerative braking.
6. Hydrogen Production:
Most of the hydrogen is produced from the hydrocarbons or fossil fuel. Hydrocarbons are composed of H2 hydrogen and Carbon, during the process of producing the hydrogen the hydrocarbons are decomposed into hydrogen and carbons. Hydrogen is stored for the usage for power generation and carbon is released into our environment.
Figure 5: Process of Generating Hydrogen Gas b y the Electrolysis of the Water Source:http://www.instructables.com/files/orig/F4A/54HN/F5R8MQ53/F4A 54HNF5R8MQ53.gif
The released carbon in atmosphere later combines with oxygen to form carbon dioxide. Though this process of generating the hydrogen is cheaper but the it is not clean process at all. At this point in time, more focused attention is being given to the clean production Khalil Raza Wright State University
13
of hydrogen despite being its costlier process. The cleanest process of getting hydrogen is by the electrolysis of the water.
1. Metal Bounded Hydrogen Storage: The high-pressurized hydrogen gas or liquid hydrogen is not safe in case of collision. In metal bounded hydrogen, the hydrogen is heated and merged with the metal. This makes it safer to be used for vehicular application as it does not blows off the tanks even if the tanks get ruptured during collision. The only downside of using this technology for the storage of hydrogen is the cost of the process9. The process is relatively costlier and while heating the hydrogen to bound with the metal, the overall efficiency of the fuel cell vehicle reduces down considerably. Therefore, if the cost is major factor than metal bounded hydrogen is not preferable to use as storage. 2. Storing Hydrogen as Liquid: To store hydrogen as liquid, it has to be cooled down to 20 K 10 above absolute temperature so that it should not evaporate in the atmosphere. It takes huge amount of energy to get this temperature range. Therefore, in this process the cost and efficiency is affected. 3. Hydrogen storage in Carbon Nanotubes: Hydrogen can be stored in Nano-scaled carbon. There have been several claims that hydrogen can be stored in carbon nanotubes obtaining 50wt% hydrogen11. Still this process is in early stage of development. It would take time to get matured and can be used practically in the fuel cell vehicles.
14
8. Conclusion:
Fuel Cell Technology for Automotive Application can bring a positive change towards transportation industry by solving the environmental problems and at the same time providing safe and sustainable medium of transport. Since, the process involved direct conversion of chemical energy to electrical energy, it has considerably higher efficiency than the convention vehicles. Moreover, the simplicity of transmission system can add more efficiency to the system. Another positive side of fuel cells is that the motor efficiency is much higher the internal combustion engine (ICE). The ICE have the lower efficiency as much as 20 25 percent whereas, the motor efficiency can as much 90 %. Hydrogen is clean, plenty in nature and renewable source of fuel. Currently the only problem is optimizing the technology and get and store the hydrogen in a cheap and safer mode. With the advancement of technology, there is a great hope that there would be major breakthrough in the future in getting the hydrogen and easily be used for storage and power up the vehicles.
15
9. Reference
1
Fuel
Cell
-
http://en.wikipedia.org/wiki/Fuel_cell
2
Fuel
cell
From
Chemical
Energy
to
Electrical
Energy
-
http://www.britannica.com/EBchecked/topic/221374/fuel-cell
3
Types
of
Fuel
Cells
-
http://www.fchea.org/index.php?id=44
4
Direct
Methanol
Fuel
Cells
Systems
-
DMFC
http://www.fuelcellmarkets.com/fuel_cell_markets/direct_methanol_fuel_cells_dmf c/4,1,1,2504.html
5
Phosphoric
Acid
Fuel
Cell
Technology
http://www.fossil.energy.gov/programs/powersystems/fuelcells/fuelscells_phosac id.html
6
Types
of
Fuel
Cells
-
http://www.britannica.com/EBchecked/topic/221374/fuel- cell
7
2004,
Sam
Gliden
and
Jared
Delahanty,
Hydrogen
Fuel-Cell
Vehicles,
The
Future
of
Transportation.
8
John
M.
Milter,
Natural
Science
Ultracapaciotrs
challenge
the
battery
http://www.ec-central.org/kfi/files/Ultracap-%20World%20&%20I%20- %20June%202004.pdf
9
2007
Billur
Sakintuna,
Farida
Lamari-Darkrim,
Michael
Hirscher,
Metal
hydride
materials
for
solid
hydrogen
storage:
A
review.
International
Journal
of
Hydrogen
Energy.
10
Takuji
Hanada
and
Kunihiro
Takahashi
Liquid
Hydrogen
Storage,
Energy
Carries
and
Conversion
Systems
Vol
II,
Liquid
Hydrogen.
11
Hydrogen
Storage
Carbon
Nanotubes
http://en.wikipedia.org/wiki/Hydrogen_storage#Carbon_nanotubes