Professional Documents
Culture Documents
Orifice Plate, Orifice Plate Manufacturer, Orifice Plate Design, Orifice Plate Standard, Orifice Plate Assembly, Orifice Assemblies, Mumbai, India
T op
Features
Despite Various Advances In Flow Measurement, Orifice Assembly Remains One Of The Most Used Flow Element.
This Is Because Of Accuracy Within +/- 1% Proven Design First Principle Device - Which Never Fails Suitable For Almost All Types Of Fluids Very Nominal Cost Compared To Other Flow Elements Robust & Simple Design Zero Maintenance Suitable For All Pipe Sizes From 1/2 To 36 Proven Solution For Flow Measurement Because Of Proven Data Available, No Need Of Frequent Calibration Like Other Element
T op
Technical Specification
Size for Integral Design : 15, 20, 25, 40 mm Size for Flanged Design : 25, 40, 50, 65, 80, 100, 150 ...250 mm Material- Flanges & Carrier Ring : A105 / SS304/ SS316 / SS316L / CS & Other materials on request. Orifice Plate : SS304, SS316, SS316L, Hast C, Monel, PP, PVC,PTFE, Coated or Clad with PP / HDPE / PTFE. Gasket : CAF / SS Spiral Wound + CAF / PTFE / PVC / Rubber, Other materials as per special request. Stud / Nut : ASTM A193 Gr B/ASTM A194 CI 2H A193 B16/A194 C14
T op
www.orificeplate.in/orifice.html
1/7
4/22/13
Orifice Plate, Orifice Plate Manufacturer, Orifice Plate Design, Orifice Plate Standard, Orifice Plate Assembly, Orifice Assemblies, Mumbai, India
Standards Applicable : Design - ISA RP 3.2 / DN 1952 / BS 1042 - 1981-84 Bore Calculation : ISO 5167 / BS 1042 / RW Miller / L. K. SPIN / AGE - 3.7 Flanges : ANSI B-16-36 / or Equivalent Types : Square edge concentric, Quadrant edges, Conical entrance, Eccentric. Pressure Toppings : For 1" to 16" - Flange Taps / Corner Taps. Above 16" - D x D/2
T op
2) Restriction Bore
Application : This Type Is Not Used For Flow Measurement But For Dropping The Pressure Considerably And Reducing The Flow Accordingly. The Bore Is Not Beveled But Kept Straight. The Beta Ratio Has No Limit As Accuracy Is Not The Goal
3) Eccentric Bore
www.orificeplate.in/orifice.html
2/7
4/22/13
Orifice Plate, Orifice Plate Manufacturer, Orifice Plate Design, Orifice Plate Standard, Orifice Plate Assembly, Orifice Assemblies, Mumbai, India
Application : Used For Measurement Of Flow For Fluids Containing Solids And Slurries. It Is Also Used For Vapors And Gases Where Condensation Is Present. The Eccentric Bore Is Offset To Where The Bore Edge Is Inscribed In A Circle That Is 98% The Line Id.
4) Segmenta Bore
Application : The Segmental Bore Is Located In The Same Way That The Eccentric Bore Is. This Type Is Used Primarily For Slurries Or Extreamly Dirty Gases Wher The Flow May Contain Impurities Heavier Than The Fluid.
5) Quadrant Bore
Application :
And
Slurries. It Is Always Recommended For Flow Where Reynolds Number Is Less Than 10,000.The Inlet Is Quarter Of A Circle And The Plate Thickness Must Be At Least Radius Of The Inlet.
www.orificeplate.in/orifice.html
3/7
4/22/13
Orifice Plate, Orifice Plate Manufacturer, Orifice Plate Design, Orifice Plate Standard, Orifice Plate Assembly, Orifice Assemblies, Mumbai, India
Application : These Are Available In Oval Or Octal Shapes. The Orifice Plate Is Universal Type And Snap Fitted On The RTJ Gasket By Screws.
T op
www.orificeplate.in/orifice.html
4/7
4/22/13
Orifice Plate, Orifice Plate Manufacturer, Orifice Plate Design, Orifice Plate Standard, Orifice Plate Assembly, Orifice Assemblies, Mumbai, India
Pipe Taps (D X D / 2)
www.orificeplate.in/orifice.html
5/7
4/22/13
Orifice Plate, Orifice Plate Manufacturer, Orifice Plate Design, Orifice Plate Standard, Orifice Plate Assembly, Orifice Assemblies, Mumbai, India
Orifice Accessories
1 Nipples
T op
Ball Valve
Valve Manifold
Condensing
www.orificeplate.in/orifice.html
6/7
4/22/13
Orifice Plate, Orifice Plate Manufacturer, Orifice Plate Design, Orifice Plate Standard, Orifice Plate Assembly, Orifice Assemblies, Mumbai, India
T op
Address : Unit No. 35/36/41,Om Anand Industrial Estate, M. S. Road, Raghunath Nagar. Thane - 400604 ( Maharashtra ) India. Tel. : 2583 2323 , 65720669, Mobile : 9819745393, 9766275711, Tele-Fax : 2582 3708, Email : response@orificeplate.in, tansaindia@gmail.com Also visit www.tansaequipments.com , www.flowmetersindia.net , www.rotameters.co.in
www.orificeplate.in/orifice.html
7/7