Professional Documents
Culture Documents
Authors
Title Simulation-Based Environmental Cost Analysis for Work-inProcess Analysis of a Three-Stage Supply Chain with Level Constraints Reducing Delay in Healthcare Delivery at Outpatients Clinics Using Discrete Event Simulation Ontology Development and Agent Communication in AgentBased Simulation of AGVS SimSum1: a General Optimisation via Simulation Approach for 0-1 Programming Models Magnetic Device Simulation Modelling and Optimisation for Scale Control Comparison of Dispatching Rules in Job-Shop Scheduling Problem Using Simulation: a Case Study Towards a Metamodel for Extended Queuing Networks Modelling and Control of Tinning Line Entry Section Using Neural Networks Semi-Discrete Events and Models in Categorical Language
Key Words WIP, Material Flow Cost Accounting, Fuzzy Control, Simulation Bullwhip Effect, Supply Chains, Spreadsheet Simulation, Real Demand Data, Level Constraints Healthcare, Discrete Event Simulation, Quality, Ophthalmology AGVS, ABSFSim, Agent-Based Simulation, Protg Ontology Editor, JADE Discrete Event Simulation, Dynamic Facility Layout Problem, Graph Labelling Problems, Travelling Salesman Problem, Zero-One Programming Magnetic Water Treatment, Magnetic-Field Simulation, Three-Dimensional Model Job Shop, Dispatching Rules, Simulation, ARENA Extended Queuing Systems, Metamodelling, Domain Specific Modelling Language, Discrete Event Simulation, Interoperability Control, Neural Network, Line Entry Section, Mathematical Model Discrete Events, Modelling and Simulation, Devs, Category Theory Hydraulic Tank, Fluid Flow, Simulation, Design Tool Geometry, Flank Wear, FE Analysis, S/N Ratio, ANOVA, DEFORM-3D Distributed Decision Making, Hierarchical Production Planning, Hierarchical Modelling, Simulation, Feedback and Control, Information Exchange Natural Convection, Nanofluids, Square Cavity, Heat Transfer, Numerical Modelling Taguchi Optimisation, Finite Element Simulation, Orthogonal Cutting, Titanium Alloys, Flow Stress Models Manufacturing Tolerancing, Statistical Analysis, Simulation, Three-Dimensional Model, Process Planning
Citation data Zhao R. (2012). Simulation-Based Environmental Cost Analysis for Work-in-Process. Int. Journal of Simulation Modelling, Vol. 11, No. 4, p. 211-224
Buchmeister, B.; Friscic, D.; Lalic, B. & Palcic, I. Al-Araidah, O.; Boran, A. & Wahsheh, A.
11, 4, 196-210
11, 4, 185-195
11, 4, 173-184
Buchmeister B., Friscic D., Lalic B., Palcic I. (2012). Analysis of a Three-Stage Supply 10.2507/IJSIMM11(4)3.212 Chain with Level Constraints. Int. Journal of Simulation Modelling, Vol. 11, No. 4, p. 196210 Al-Araidah O., Boran A., Wahsheh A. (2012). Reducing Delay in Healthcare Delivery at 10.2507/IJSIMM11(4)2.211 Outpatients Clinics Using Discrete Event Simulation. Int. Journal of Simulation Modelling, Vol. 11, No. 4, p. 185-195 Komma V. R., Jain P. K., Mehta N. K. (2012). Ontology Development and Agent 10.2507/IJSIMM11(4)1.193 Communication in Agent-Based Simulation of AGVS. Int. Journal of Simulation Modelling, Vol. 11, No. 4, p. 173-184 10.2507/IJSIMM11(3)4.206 Azimi P. (2012). SimSum1: a General Optimisation via Simulation Approach for 0-1 Programming Models. Int. Journal of Simulation Modelling, Vol. 11, No. 3, p. 150-164
Azimi, P.
11, 3, 150-164
Lipus, L. C.; Acko, B. & Hamler, A. Kaban, A. K.; Othman, Z. & Rohmah, D. S. Bourouis, A. & Belattar, B.
11, 3, 141-149
11, 3, 129-140
Lipus L. C., Acko B., Hamler A. (2012). Magnetic Device Simulation Modelling and 10.2507/IJSIMM11(3)3.205 Optimisation for Scale Control. Int. Journal of Simulation Modelling, Vol. 11, No. 3, p. 141149 Kaban A. K., Othman Z., Rohmah D. S. (2012). Comparison of Dispatching Rules in Job10.2507/IJSIMM11(3)2.201 Shop Scheduling Problem Using Simulation: a Case Study. Int. Journal of Simulation Modelling, Vol. 11, No. 3, p. 129-140 10.2507/IJSIMM11(3)1.190 Bourouis A., Belattar B. (2012). Towards a Metamodel for Extended Queuing Networks. Int. Journal of Simulation Modelling, Vol. 11, No. 3, p. 117-128 Zilkova J., Timko J., Girovsky P. (2012). Modelling and Control of Tinning Line Entry Section Using Neural Networks. Int. Journal of Simulation Modelling, Vol. 11, No. 2, p. 97-109 Raczynski S. (2012). Semi-Discrete Events and Models in Categorical Language. Int. Journal of Simulation Modelling, Vol. 11, No. 2, p. 89-96 Tic V., Lovrec D. (2012). Design of Modern Hydraulic Tank Using Fluid Flow Simulation. Int. Journal of Simulation Modelling, Vol. 11, No. 2, p. 77-88
11, 3, 117-128
11, 2, 97-109
10.2507/IJSIMM11(2)4.210
10 Raczynski, S.
11, 2, 89-96
10.2507/IJSIMM11(2)3.203
Design of Modern Hydraulic Tank Using Fluid Flow Simulation Optimization of Cutting Insert Geometry Using DEFORM-3D: Numerical Simulation and Experimental Validation
11, 2, 77-88
10.2507/IJSIMM11(2)2.202
11, 2, 65-76
Tamizharasan T., Senthil Kumar N. (2012). Optimization of Cutting Insert Geometry Using 10.2507/IJSIMM11(2)1.200 DEFORM-3D: Numerical Simulation and Experimental Validation. Int. Journal of Simulation Modelling, Vol. 11, No. 2, p. 65-76 10.2507/IJSIMM11(1)4.199 White L. R. (2012). A Hierarchical Production Planning System Simulator. Int. Journal of Simulation Modelling, Vol. 11, No. 1, p. 40-57
13 White, L. R.
11, 1, 40-57
Heat Transfer Enhancement for Natural Convection Flow of Water-Based Nanofluids in a Square Enclosure Optimising Flow Stress Input for Machining Simulations Using Taguchi Methodology Evaluation of Manufacturing Tolerance Using a Statistical Method and Experimentation
11, 1, 29-39
11, 1, 17-28
11, 1, 5-16
Ternik P., Rudolf R. (2012). Heat Transfer Enhancement for Natural Convection Flow of 10.2507/IJSIMM11(1)3.198 Water-Based Nanofluids in a Square Enclosure. Int. Journal of Simulation Modelling, Vol. 11, No. 1, p. 29-39 Vijay Sekar K. S., Pradeep Kumar M. (2012). Optimising Flow Stress Input for Machining 10.2507/IJSIMM11(1)2.195 Simulations Using Taguchi Methodology. Int. Journal of Simulation Modelling, Vol. 11, No. 1, p. 17-28 Barkallah M., Louati J., Haddar M. (2012). Evaluation of Manufacturing Tolerance Using a 10.2507/IJSIMM11(1)1.194 Statistical Method and Experimentation. Int. Journal of Simulation Modelling, Vol. 11, No. 1, p. 5-16
17 Burinskiene, A.
The Travelling of Forklifts in Warehouses A Simulation Metamodelling Based Neural Networks for LotSizing Problem in MTO Sector Optimum Stable Gait Planning for an 8 Link Biped Robot Using Simulated Annealing Scientific Evaluation of Polyclinic Operating Strategies with Discrete-Event Simulation Investigations on the Dynamic Station Keeping of an Underactuated Autonomous Underwater Robot Modelling and Simulating a Controlled Press-Brake Supply System Layout Optimization of Power Modules Using a Sequentially Coupled Approach 3D Finite Element Analysis in the Selective Laser Melting Process FMS Performance under Balancing Machine Workload and Minimizing Part Movement Rules Flexible Manufacturing Systems Modelling and Performance Evaluation Using AutoMod
RF, Forklifts, Travel Distance, Accuracy, MultipleTasks Simulation Based Metamodel, Neural Network, Multiple Criteria Optimization, Lot-Sizing Problem, MTO, Supply Chain Management, Case Study Gait Planning, Sagittal Plane, Zero Moment Point, Simulated Annealing, Degrees of Freedom Cycle Time, Discrete-Event Simulation, Appointment Scheduling, Walk-in Patients Station Keeping, Underwater Robot, Underwater Current, Tracking Control, Underactuated Control Metal Forming Machines, Electro Hydraulic System, Modelling, Simulation Multidisciplinary Design, Multi-Physical Coupling, Layout Optimization, Power Modules Rapid Prototyping, Selective Laser Melting, FEM, Metal Powders Flexible Manufacturing System, OOM, Simulation, Time in System, WINQ Flexible Manufacturing System, Simultaneous Scheduling, Automated Guided Vehicle, Simulation, Automod Machining, Defects, Tolerancing, Dynamic MIMO Control Loop, Synthesis, Autonomous Control, Invariant Control Uncertainty, Differential Inclusion, Dynamic System, Duality, Category Theory Discrete-Event Simulation, Disk Array Simulation, Disk Simulation, Disk Cache Model Business Continuity Planning, Personnel Planning, Simulation, Pandemic Animation, Full Scope Replica Simulator, Human Machine Interface, Process Flow Diagram, Prototype Fast Breeder Reactor
10, 4, 204-212
10.2507/IJSIMM10(4)4.191
Burinskiene A. (2011). The Travelling of Forklifts in Warehouses. Int. Journal of Simulation Modelling, Vol. 10, No. 4, p. 204-212 Hachicha W. (2011). A Simulation Metamodelling Based Neural Networks for Lot-Sizing Problem in MTO Sector. Int. Journal of Simulation Modelling, Vol. 10, No. 4, p. 191-203
10, 4, 191-203
10.2507/IJSIMM10(4)3.188
19
10, 4, 177-190
Sudheer A. P., Vijayakumar R., Mohandas K. P. (2011). Optimum Stable Gait Planning for 10.2507/IJSIMM10(4)2.186 an 8 Link Biped Robot Using Simulated Annealing. Int. Journal of Simulation Modelling, Vol. 10, No. 4, p. 177-190 10.2507/IJSIMM10(4)1.178 Oh H. C., Chow W. L. (2011). Scientific Evaluation of Polyclinic Operating Strategies with Discrete-Event Simulation. Int. Journal of Simulation Modelling, Vol. 10, No. 4, p. 165-176
10, 4, 165-176
10, 3, 145-157
Santhakumar M., Asokan T. (2011). Investigations on the Dynamic Station Keeping of an 10.2507/IJSIMM10(3)4.185 Underactuated Autonomous Underwater Robot. Int. Journal of Simulation Modelling, Vol. 10, No. 3, p. 145-157 10.2507/IJSIMM10(3)3.184 Lovrec D., Kastrevc M. (2011). Modelling and Simulating a Controlled Press-Brake Supply System. Int. Journal of Simulation Modelling, Vol. 10, No. 3, p. 133-144
22 Lovrec, D. & Kastrevc, M. Hammadi, M.; Choley, J. Y.; Penas, O.; Louati, J.; Rivire, A. & Haddar, M. Contuzzi, N.; Campanelli, S. L. & Ludovico, A. D.
10, 3, 133-144
23
10, 3, 122-132
24
10, 3, 113-121
Hammadi M., Choley J. Y., Penas O., Louati J., Riviere A., Haddar M. (2011). Layout 10.2507/IJSIMM10(3)2.183 Optimization of Power Modules Using a Sequentially Coupled Approach. Int. Journal of Simulation Modelling, Vol. 10, No. 3, p. 122-132 Contuzzi N., Campanelli S. L., Ludovico A. D. (2011). 3D Finite Element Analysis in the 10.2507/IJSIMM10(3)1.169 Selective Laser Melting Process. Int. Journal of Simulation Modelling, Vol. 10, No. 3, p. 113121 10.2507/IJSIMM10(2)4.182 Pereira A. (2011). FMS Performance under Balancing Machine Workload and Minimizing Part Movement Rules. Int. Journal of Simulation Modelling, Vol. 10, No. 2, p. 91-103
25 Pereira, A.
10, 2, 91-103
10, 2, 78-90
27
Chaari, R.; Abdennadher, M.; Louati, J. & Modelling of the 3D Machining Geometric Defects Accounting Haddar, M. for Workpiece Vibratory Behaviour Simulation of Control of Multi-Variable Control Loop: Steam Turbine Uncertainty, Dualism and Inverse Reachable Sets
10, 2, 66-77
Reddy B. S. P., Rao C. S. P. (2011). Flexible Manufacturing Systems Modelling and 10.2507/IJSIMM10(2)3.176 Performance Evaluation Using AutoMod. Int. Journal of Simulation Modelling, Vol. 10, No. 2, p. 78-90 Chaari R., Abdennadher M., Louati J., Haddar M. (2011). Modelling of the 3D Machining 10.2507/IJSIMM10(2)2.173 Geometric Defects Accounting for Workpiece Vibratory Behaviour. Int. Journal of Simulation Modelling, Vol. 10, No. 2, p. 66-77 10.2507/IJSIMM10(2)1.167 Navratil P., Balate J. (2011). Simulation of Control of Multi-Variable Control Loop: Steam Turbine. Int. Journal of Simulation Modelling, Vol. 10, No. 2, p. 53-65 Raczynski S. (2011). Uncertainty, Dualism and Inverse Reachable Sets. Int. Journal of Simulation Modelling, Vol. 10, No. 1, p. 38-45 Vickovic L., Celar S., Mudnic E. (2011). Disk Array Simulation Model Development. Int. Journal of Simulation Modelling, Vol. 10, No. 1, p. 27-37 Tan Y., Takakuwa S. (2011). Use of Simulation in a Factory for Business Continuity Planning. Int. Journal of Simulation Modelling, Vol. 10, No. 1, p. 17-26
10, 2, 53-65
29 Raczynski, S.
10, 1, 38-45
10.2507/IJSIMM10(1)4.180
10, 1, 27-37
10.2507/IJSIMM10(1)3.174
10, 1, 17-26
10.2507/IJSIMM10(1)2.172
32
Bindu, S.; Jayanthi, T.; SatyaMurty, S. A. Role of Animated Human Machine Interface in Nuclear Power V.; Swaminathan, P. & Raj, B. Plant Simulation
10, 1, 5-16
Bindu S., Jayanthi T., SatyaMurty S. A. V., Swaminathan P., Raj B. (2011). Role of 10.2507/IJSIMM10(1)1.171 Animated Human Machine Interface in Nuclear Power Plant Simulation. Int. Journal of Simulation Modelling, Vol. 10, No. 1, p. 5-16