Professional Documents
Culture Documents
Project
Part Number Al Assembly Designer Cost Quiroga Capacho Johan $ 0,00
Status
Design Status WorkInProgress
Physical
Area Volume 530,080 in^2 63,694 in^3
Simulation:1
General objective and settings: Simulation Type Static Analysis Last Modification Date 24/03/2013, 09:06 p.m.
Material(s)
Name General Aluminum 6061 Mass Density Yield Strength Young's Modulus Poisson's Ratio Expansion Coefficient Stress Thermal Thermal Conductivity Specific Heat ANSI ANSI ANSI ANSI ANSI ANSI 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 169,180 lbmass/ft^3 39,913 ksi 10000,000 ksi 0,330 ul 0,0000425 ul/f 167,000 W/( m K ) 1,256 J/( kg K ) 00000001.ipt 00000002.ipt 00000003.ipt 00000004.ipt 00000005.ipt 00000006.ipt
Part Name(s)
Cross Section(s)
Section Area (A) Section Width Geometry Properties Section Height Section Centroid (x) Section Centroid (y) Moment of Inertia (Ix) Moment of Inertia (Iy) Torsional Rigidity Modulus (J) Mechanical Properties Section Modulus (Wx) Section Modulus (Wy) Reduced Shear Area (Ax) Reduced Shear Area (Ay) ANSI ANSI ANSI ANSI ANSI ANSI 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 00000001.ipt 00000002.ipt 00000003.ipt 00000004.ipt 00000005.ipt 00000006.ipt 1,589 in^2 2,000 in 2,000 in 1,000 in 1,000 in 0,766 in^4 0,766 in^4 1,316 in^4 0,766 in^3 0,766 in^3 0,764 in^2 0,764 in^2
Part Name(s)
Beam Model
Nodes 12
Beams
- Square/Rectangular Tubes 6
Rigid Links
Name Displacement fixed fixed fixed fixed fixed fixed Rotation fixed fixed fixed fixed fixed fixed fixed fixed fixed X - axis Y - axis Z - axis X - axis Y - axis Z - axis Parent Node Child Node(s) Node:2 Node:4 Node:7 Node:9, Node:3 Node:8, Node:5 Node:10, Node:11
Operating conditions
Gravity
Load Type Gravity Magnitude 386,220 in/s^2 Direction Y-
Force:1
Load Type Magnitude Angle of Plane Angle in Plane Fx Fy Fz Selected Reference(s) Force 40,000 lbforce 270,00 deg 90,00 deg 0,000 lbforce -40,000 lbforce 0,000 lbforce
Fixed Constraint:1
Constraint Type Fixed Selected Reference(s)
Results
Reaction Force and Moment on Constraints
Constraint Name Fixed Constraint:1 Reaction Force Magnitude 46,562 lbforce Components (Fx,Fy,Fz) -0,000 lbforce 46,562 lbforce 0,000 lbforce Reaction Moment Magnitude Components (Mx,My,Mz)
0,000 lbforce in 0,000 lbforce in 0,841 ksi 0,056 ksi 0,000 ksi 0,000 ksi 0,869 ksi -0,000 ksi 0,059 ksi 0,123 ksi 0,000 ksi 0,000 ksi
Smax(Mx) -0,000 ksi Smin(Mx) -0,000 ksi Smax(My) 0,000 ksi Smin(My) -0,869 ksi Saxial Shear Stresses Tx Ty -0,083 ksi -0,069 ksi -0,000 ksi -0,000 ksi
Torsional Stresses T
Figures
Displacement
Fx
Fy
Fz
Mx
My
Mz
Smax
Smin
Smax(Mx)
Smin(Mx)
Smax(My)
Smin(My)
Saxial
Tx
Ty
Project
Part Number Steel, Mild Designer Cost Quiroga Capacho Johan $ 0,00
Status
Design Status WorkInProgress
Physical
Area Volume 1008,649 in^2 121,165 in^3
Simulation:2
General objective and settings: Simulation Type Static Analysis Last Modification Date 24/03/2013, 04:53 p.m.
Material(s)
Name General Steel, Mild Mass Density Yield Strength Young's Modulus Poisson's Ratio Expansion Coefficient Stress Thermal Thermal Conductivity Specific Heat ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 490,684 lbmass/ft^3 30,044 ksi 31930,334 ksi 0,275 ul 0,0000216 ul/f 56,000 W/( m K ) 0,460 J/( kg K ) 00000001.ipt 00000002.ipt 00000003.ipt 00000004.ipt 00000005.ipt 00000006.ipt 00000007.ipt 00000008.ipt 00000009.ipt 00000010.ipt 00000011.ipt
Part Name(s)
Cross Section(s)
Section Area (A) Section Width Geometry Properties Section Height Section Centroid (x) Section Centroid (y) Moment of Inertia (Ix) Moment of Inertia (Iy) Torsional Rigidity Modulus (J) Mechanical Properties Section Modulus (Wx) Section Modulus (Wy) Reduced Shear Area (Ax) Reduced Shear Area (Ay) ANSI ANSI ANSI ANSI ANSI ANSI 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 2x2x1_4 00000001.ipt 00000002.ipt 00000003.ipt 00000004.ipt 00000005.ipt 00000006.ipt 1,589 in^2 2,000 in 2,000 in 1,000 in 1,000 in 0,766 in^4 0,766 in^4 1,316 in^4 0,766 in^3 0,766 in^3 0,764 in^2 0,764 in^2
Part Name(s)
Beam Model
Nodes Beams 22 11
- Square/Rectangular Tubes 11
Rigid Links
Displacement Name Rigid Link:1 Rigid Link:2 Rigid Link:3 Rigid Link:4 Rigid Link:5 Xaxis fixed fixed fixed fixed fixed Yaxis fixed fixed fixed fixed fixed Zaxis fixed fixed fixed fixed fixed Rotation Xaxis fixed fixed fixed fixed fixed Yaxis fixed fixed fixed fixed fixed Zaxis fixed fixed fixed fixed fixed Parent Node Node:2 Node:1 Node:4 Node:5 Node:10 Child Node(s) Node:6, Node:13, Node:20, Node:21, Node:3 Node:19 Node:7, Node:12 Node:8, Node:9, Node:14, Node:15, Node:18, Node:22 Node:16, Node:17
Operating conditions
Gravity
Load Type Gravity Magnitude 386,220 in/s^2 Direction Y-
Force:1
Load Type Magnitude Angle of Plane Angle in Plane Fx Force 40,000 lbforce 270,00 deg 90,00 deg 0,000 lbforce
Fy Fz Selected Reference(s)
Fixed Constraint:1
Constraint Type Fixed Selected Reference(s)
Results
Reaction Force and Moment on Constraints
Constraint Name Fixed Constraint:1 Reaction Force Magnitude 69,490 lbforce Components (Fx,Fy,Fz) -0,000 lbforce 69,490 lbforce 0,000 lbforce Reaction Moment Magnitude Components (Mx,My,Mz)
-387,268 lbforce in 0,937 lbforce in -198,250 lbforce in 387,268 lbforce in -0,405 lbforce in -0,002 ksi -0,528 ksi 0,360 lbforce in 0,498 ksi 0,048 ksi 0,506 ksi 0,000 ksi 0,506 ksi -0,000 ksi 0,053 ksi 0,065 ksi 0,000 ksi 0,006 ksi
Smax(Mx) -0,000 ksi Smin(Mx) -0,506 ksi Smax(My) 0,000 ksi Smin(My) -0,506 ksi Saxial Shear Stresses Tx Ty -0,041 ksi -0,110 ksi -0,031 ksi -0,005 ksi
Torsional Stresses T
Figures
Displacement
Fx
Fy
Fz
Mx
My
Mz
Smax
Smin
Smax(Mx)
Smin(Mx)
Smax(My)
Smin(My)
Saxial
Tx
Ty