Professional Documents
Culture Documents
# http://youresuchageek.blogspot.fr/2012/09/howto-raspberry-pi-openelec-on.html
#
# This Program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This Program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenELEC.tv; see the file COPYING. If not, write to
# the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110
, USA.
# http://www.gnu.org/copyleft/gpl.html
#
###############################################################################
# Bootloader configuration - config.txt
################################################################################
##
##############################################################################
# Memory (System/GPU configuration )
################################################################################
# default GPU memory split (do not change if you do not know what you are doing)
gpu_mem=128
# SDRAM size based GPU memory split, uncomment and setup to override 'gpu_mem'
# gpu_mem_256=128
# gpu_mem_512=128
################################################################################
#
# Overclocking settings
# WARNING: Do not change/enable if you do not know what you are doing!
#
#
The System may become unstable or you can have data corruption or
you can loose your warranty if you set wrong settings
#
# please read: http://elinux.org/RPi_config.txt
# Overclocking_configuration
################################################################################
#
#Overclock mode settings.
#
# default recommended values are: arm_freq | core_freq | sdram_freq | over_volta
ge
# no overclocking
700
250
400
# mode 'Modest'
800
300
400
# mode 'Medium'
900
333
450
# mode 'High'
950
450
450
# mode 'Turbo'
1000
500
500
# arm_freq=700
# core_freq=250
# sdram_freq=400
# over_voltage=0
# set to 'force_turbo=1' to disable dynamic overclocking (you can lose your warr
anty!)
force_turbo=0
# If you have any data corruption using Turbo Mode and overclocking
# try with this setting uncommented
# If this still fails, try to use Medium mode without "over_voltage=2"
# decode_DDP=0x00000000
################################################################################
# End of default configuration
# all values below this line were inserted from config.txt.bk (your old config)
# and can be merged with the above values
################################################################################