Professional Documents
Culture Documents
Fourth Edition
Power/Data 85
Lightweight Core 69
Table Edge 44
Types
Profiles
Details
Communication 82
Speaker Phones
Microphones
Configurations 1
Boardroom
Training Table Legs 58
Conference Square
Seminar Round
Tapered Wire Management 86
Metal External
Steel Hinged Door
Chrome Raceway
T-Base Column Guard
Levelers 72
Discs
Casters
Locking
Table Storage 91
Leg Cart
Table Cart
Envelope Wrap
“Toggle” Connector 56
ARBOR SPECIFICATION GUIDE | INTRODUCTION | iv
TABLES AND CONFIGUR ATIONS
Individual Arbor tables are the building blocks that can be combined and re-
combined to create layouts that best support a particular meeting’s purpose.
Arbor tables are typically simple geometric forms: rectangles, squares, half
circles, and quarter circles. Used in 1-to-1 and 2-to-1 ratios, each table top
can be combined into a variety of configurations to meet specific space and
functional requirements. Arbor’s inherent lightweight and quick configu-
rability also allow for arrangements to be easily changed when desired and
stored when not in use.
Rectangular Arbors, especially those using a 2-to-1 length to width ratio, can be assembled in several different ways:
side to side, end to end, and side to end. These combinations can produce varying layouts, from large rectangles to
hollow squares to long ranks.
A B
C D
E F
ARBOR SPECIFICATION GUIDE | TABLES + CONFIGURATIONS | 5
RECTANGULAR TABLES
In some cases, square topped Arbors may be the best solution. Square tops are often used in dining areas or in multi-
function areas where dining and conferencing are combined. Depending on the size of the top and the aesthetic
requirements, it may be possible to use a cube style pedestal base rather than our toggle leg system.
A B
C D
E F
8 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM
SQUARE TABLES
CIRCLE
Arbors can be built as circles, half-circles and quarter circles.
They can also be assembled to create circles or toroids. These
use the same toggle legs and thus alleviate leg clearance issues
by using shared legs at table joints.
OPEN CENTER
Arbors can be used to great effect in a quarter circle format. These
quadrants, either with a full radius edge or with a center scallop,
can be used to create a variety of racetrack plans when used in
conjunction with Arbor rectangles or squares.
VIDEO CONFERENCING
“Keystone” Arbors allow the creation of the “V” shapes so pop-
ular for video conferencing applications. Since the keystone is a
custom shape, it can incorporate whatever angles are required
to optimize sight lines or best utilize a particular space.
FREE FORM
Configurations can be created using a combination of Arbor
shapes and sizes. These free form arrangements provide
the ultimate in design flexibility and are a great solution for
spaces that require a truly custom solution.
Made from slices of an individual tree, veneers are a popular choice to create
uniquely beautiful designs that add warmth to any room. The unique char-
acteristic of a veneer is a reflection of the type of tree, the way the tree was
sliced and how the grain of the veneer slices are matched to create the final
product. At Wall Goldfinger, we are known for our expertise in the selection
and hand crafting of veneers. We offer more than 60 choices of veneer and
because of our extensive experience and relationships, can source custom
veneers upon request.
LIGHT
PLAIN SLICED ASH QUARTERED FIDDLEBACK ENGLISH SYCAMORE
MEDIUM
PLAIN SLICED MAPLE BAMBOO SMALL KNUCKLE
MEDIUM
MEDIUM
QUARTERED FIGURED ANIGRE PLAIN SLICED PEARWOOD
MEDIUM DARK
RIFT WHITE OAK QUARTERED OKUME
MEDIUM DARK
QUARTERED FIGURED MOZAMBIQUE PLAIN SLICED MAKORE
DARK
PLAIN SLICED ROPEY CHERRY QUARTERED MAHOGANY
DARK
DARK
QUARTERED BEE’S WING EUCALYPTUS BAMBOO LARGE KNUCKLE
BLOCK BASKETWEAVE
SPECIAL 1 SPECIAL 2
WEDGE
BOOKMATCH PATTERNS
A B C
D E F
G H I
BOX PATTERNS
J K L
DIAMOND PATTERNS
M N O
P Q R
S T U
OTHER PATTERNS
V W X
Wall Goldfinger offers the ability to integrate stone for a truly custom look.
We have an extensive network of stoneyards and work closely with the table
designer and stoneyard to select the specific stone slabs for each project.
We have included 32 of the top stone choices in this catalog. If you don’t see
exactly what you want, let us know. Our extensive network of stoneyards
allow us to source any stone upon request.
MARBLE
SEA FOAM AMARELLO
ATIBAIA MISSISQUOI
LIMESTONE
QUARTZITE
IVORY ANTICO VERDE CACTUS
TRAVERTINE
UNFADING MOTTLED GREEN & PURPLE ST. PETER DARK
Inlays, profiles and edges offer even more ways to create truly custom
designs. Inlays and edges can be done in a variety of materials, including
veneer, metal and stone.
A B C
D E F
G H I
J K L
M N O
P Q R
C #572 (2″)
D #829 (2″)
E #839 (2″)
F #836 (2″)
To attach legs to corner table plates: Insert plungers into When pedestals or T-base legs are used, the Arbor legs
holes in the table plates. Flip the latches into the notches are connected to table tops using the Wall Goldfinger
in the leg plate, locking the leg in place. To attach two “Toggle” connector. The leg fastens to the table top with
tables with one leg: Align the tables so that plates or half- four latches. There is no loose hardware. Legs can be set
plates are opposite each other. Insert plungers into holes up the standard way of four to a table at the corners (left
in the table plates. Flip the latches into the notches in the column), or they can be placed between two or four tops
leg plate, to level the tops to each other as well as locking (right column), acting as a leveling and ganging device.
the leg in place. The system can also be used to gang 3 or 4
tops together using a single leg.
ANDERLOC
Square leg series available with raceway wire management | Variety of woods available: Maple, cherry, Honduras
mahogany, walnut, and specials | See Accessories for table legs featuring wire management and levelers/casters
14-gauge tubular steel | Standard available colors: Furniture White, Neutral Light, Western Beige,
Maple Brown, Flat Black, Forest Green, Navy, Burgundy, Stardust, Smoke Gray, Auburn Gray, Oxford Gray,
Georgian Gray Wrinkle, Mist Gray Wrinkle, Chateau Brown Wrinkle, Black Wrinkle, Antique Bronze, Charcoal
Metallic, Satin Chrome, Gunmetal, Brushed Steel
14-gauge tubular steel | Wire management not available for tapered legs | Variety of Woods available:
Maple, cherry, Honduras mahogany, walnut, and specials | See Accessories for table legs featuring wire
management and levelers/casters
14-gauge tubular steel | Wire management not available for tapered legs | Variety of Woods available:
Maple, cherry, Honduras mahogany, walnut, and specials
Powder coating is an advanced method of applying a until heated and fused into a smooth coating in a cur-
decorative and protective finish to a wide range of ma- ing oven. The result is a uniform, durable, high-quality,
terials and products that are used by both industries and and attractive finish that is extremely durable, providing
consumers. The powder used for the process is a mixture superb impact and corrosion resistance. Powder coat-
of finely ground particles of pigment and resin, which is ing is the fastest-growing finishing technology in North
sprayed onto a surface to be coated. The charged powder America, representing over 10% of all industrial finishing
particles adhere to the electrically grounded surfaces applications. Powder Coating is also RoHS Compliant.
Smoke Gray Mist Gray Wrinkle Flat Black Chateau Brown Wrinkle Western Beige Auburn Gray
P10113 P10117 P10031 P10057 P10129 P10131
Georgian Gray Wrinkle Oxford Gray Black Wrinkle Maple Brown Neutral Light Charcoal Metallic
P10029 P10048 P10030 P10071 P10114 P10116
Illustrations are broadly representative of specific painted metal types. Please review actual samples before making final selection.
T-BASE
BULLNOSED BASE
Bridge tables span between fixed conference tables, creating a flexible table system that can combine to make large
tables, and then fold and roll out of the way for other uses within the conference room. These are available in various
woods and sizes, for use in multipurpose rooms and also offer electric, data and phone connections as options.
LEVELING SYSTEM
LEVELER DISCS
Knob Style Steel and Stainless Steel Glide is ideal for light-duty load requirements. These low-profile, solid
bottom, large diameter black base glides are perfect for leveling and stabilizing tables without the need for
tools. Useful in both feet and knob applications. 3″ × ½″ and adjustable to ¾″. Available in powder coated
black, brushed stainless steel, and black plastic.
Antique Polished Polished Satin Black Putty Walnut Light Gray White
Bronze Brass Chrome Chrome Brown
SOLID BRASS
WOOD GROMMETS
Pivoting grommet doors are a simple and durable system for wiring to
pass through to the floor for data connections. The pivot system never
needs adjustment. Standard size is 3″ by 3″. Brushed or polished stainless
steel, bronze, and a variety of wood veneers are available.
VENEER
VENEER
SPEAKER PHONE
MICROPHONES
* Standard available colors in Powder Coat. Not available in Brushed Steel, Antique Bronze, or Brushed Chrome
A lightweight aluminum leg that incorporates wire Easy access wire manager that detaches from
management — a custom Wall Goldfinger propri- round table leg column to organize wires and
etary extrusion. A clip-in plate can be added to eliminate clutter.
contain wire management. Anodized or powder
coated finish available.
FULL MODESTY
Removable panel in front of leg
Attach and remove full or half modesty panels to table tops with our toggle latch connector. We can apply the connec-
tor system to veneer and metal modesty panels.
ENVELOPE WRAP
Protect custom furniture while transporting or in
storage. Made of quilted poly/cotton outer fabric with
cotton and synthetic filler. Quilted with lock-stitch-
ing for extra durability.
FITTED ENVELOPE
Table tops stored in fabric envelopes, fitted to size,
with velcro enclosure to form fit.
Component Description
TABLES 2″ TOP V-1 ½″ WOOD EDGE 2″ WOOD EDGE 3⁄16″ SST 3⁄16″ ALUMINUM
30 x 60 39 lb 50 lb 50 lb 42 lb
33 x 66 46 lb 58½ lb 58½ lb 49 lb
36 x 72 54½ lb 68 lb 68 lb 57½ lb
36 x 84 64 lb 79 lb 79 lb 67½ lb
48 x 48 49 lb 61 lb 61 lb 52 lb
54 x 54 61½ lb 75 lb 75 lb 64½ lb
60 x 60 75 lb 90 lb 90 lb 78½ lb
TABLES 1½″ TOP V-1 ½″ WOOD EDGE 2″ WOOD EDGE 3⁄1″ SST 3⁄16″ ALUMINUM
TABLES 1½″ TOP L-1 ½″ WOOD EDGE 1½″ WOOD EDGE 3⁄16″ SST 3⁄16″ ALUMINUM
30 x 60 39 lb 48 lb 36½ lb 28½ lb
33 x 66 47 lb 58½ lb 42½ lb 34 lb
36 x 72 56 lb 69½ lb 49 lb 40 lb
36 x 84 65½ lb 81¼ lb 56½ lb 46½ lb
48 x 48 50 lb 62 lb 44 lb 35½ lb
54 x 54 63 lb 78 lb 53 lb 44 lb
60 x 60 78 lb 96½ lb 63½ lb 53½ lb
V-1 = Veneer, L-1 = Majilite synthetic leather, ST-1 = Lightweight stone, SST = Stainless steel
Component Description
TABLES 1½″ TOP ST-1 ¼″ ST-1 EDGE ½″ WOOD EDGE 1½″ WOOD EDGE 3⁄16″ SST 3⁄16″ ALUMINUM
8 lb 8 lb 4 lb 6 lb 3½ lb 3 lb
1 lb ⅓ lb 6 lb 2 lb
V-1 = Veneer, L-1 = Majilite synthetic leather, ST-1 = Lightweight stone, SST = Stainless steel
These weights are approximate and may vary due to specific construction techniques.
PDF | 74.6 MB
www.wallgoldfinger.com/publications
eNewsletters
SECOND SERIES
www.wallgoldfinger.com/news/subscribe
Postcard Collection
CONTINUING SERIES
www.wallgoldfinger.com/contact/salesrepresentatives
Fourth Edition
January 2011
The content of this guide is furnished for informational use only and is dis-
tributed for sales representatives of Wall Goldfinger, Inc.
This volume was produced entirely on an Apple® MacPro Dual Core Intel G5
computer with Adobe® InDesign® CS5 software, output to a Canon® CLC-
1180 printer, and printed on Mohawk Color Copy 100% recycled 28 lb PC
White paper which is manufactured entirely with Green-e certified wind-
generated electricity.
W A L L G O L D F I N G E R
7 Belknap Street, Suite 3
Northfield, Vermont 05663
P 802 | 485-6261
F 802 | 485-6267
www.wallgoldfinger.com
©2011