Professional Documents
Culture Documents
CORETM Technology
The power of innovation Throughout the years Holmatro has been at the forefront of technological developments in the field of hydraulic rescue equipment. To meet the ongoing challenges in the technical rescue discipline we continuously work on high-quality, innovative and reliable solutions. In this way we try to contribute to the daily successes of rescuers in performing their critical, life-saving tasks.
CORETM Technology: Safer, Easier & Quicker CORE Technology is a revolutionary turning point in rescue tool technology and definitely more than a new piece of equipment. It allows you, as a rescuer, to rethink and simplify your extrication techniques and your standard operating procedures. Once working with CORE, you will discover the unprecedented benefits it offers. CORE Technology (Coaxial Rescue Equipment Technology) refers to the hoses, couplers and valves of a rescue system. In other words the way hydraulic oil is directed from the pump to the tool and vice versa. A traditional dual hose system consists of a separate pressure and return hose connecting pump and rescue tool. CORE Technology is a one hose system, consisting of a high pressure inner hose inside a low pressure outer hose. The hydraulic principle and tool performance of CORE Technology and traditional technology are of course identical. Compared to working with a traditional system, working with CORE is safer, easier & quicker.
return oil
CORETM
Safety couplers
--one step auto-lock coupler --two step uncoupling system
Hose testing
- all testing according to every appropriate safety norm
CORETM Technology
Easier & quicker Simple set up
- connect CORE hose to pump or tool with or without pump running
360
360
- lightweight
- easy to clean
space saved
Innovative features
Carrying handles with integrated lighting
--never work in your own shadow again, neither at night or during daytime when bright sunshine can cause dark shady areas --on one standard AA battery, the LEDs work about 6 hours continuously --the battery can be replaced in less than 60 seconds
i-Bolt Technology
The new revolutionary central bolt construction --the blades are squeezed together directly, resulting in less blade separation, a far more efficient cutting process and better cutting performance --the i-Bolt is sunk into the blade holder; this results in a much flatter design which provides better access in narrow spaces --the bolt and blade holder are protected from damage by a stainless steel cover
Squeezes (softer aluminium) blade holder. Blades are squeezed indirectly only.
Speed Valve
--with the Speed Valve rams and spreaders open up significantly faster at pressures below 150 bar. This allows for faster and more efficient tool placement, thus shortening the duration of the extrication time required. At 150 bar working pressure the valve automatically reduces the opening speed back to normal to ensure a controlled and safe extrication process. Opening times spreaders and rams at working pressures below 150 bar
without Speed Valve
0
150 bar
CO
150 bar
E
S
CO
NDS
The conflict between safety and accessibility Car manufacturers increasingly use reinforced constructions and high-strength materials in their vehicles to better protect passengers in case of an accident. The new technology applied in these cars often causes a conflict between safety and accessibility. In other words, the car construction that makes it possible for a driver to survive an accident could be the same reason why it is impossible for rescuers to free him out of his car. To help rescuers face this challenge, Holmatro developed a range of New Car Technology (NCTTM) cutters. Thanks to various special features (see below) these cutters offer a better cutting performance on the tougher constructions found in modern vehicles.
70%
BAR
210 bar
Indicative pressure needed to cut a B-pillar of a 2009 car prototype with Holmatro NCTTM blades. Excess capacity with a cutter with Holmatro NCTTM blades (70%).
202 mm
--U-shaped blades pull material into the cutting recess --allows wide materials such as B- and C-pillars to be cut at the strongest point of the cutter
GP blades
720 bar 0 bar
18%
590 bar
Indicative pressure needed to cut a B-pillar of a 2009 car prototype with a conventional GP blade cutter. Excess capacity with a cutter with GP blades (18%).
A
B
103.8 t
NCTTM II cutters
CU 4055 C NCTTM II
Tested according to EN 13204 and NFPA 1936 | All models also available in dual hose version
CU 4035 C NCTTM II
CU 4050 C NCTTM II
Features / Benefits Time saving New Car Technology Improved blade design NCTTM II
--pulls material towards the strongest point of the cutter --superior cutting performances, tested on the latest car models --41 mm round bar (CU 4050 / 4055)
GP cutters
CU 4035 C GP
Tested according to EN 13204 and NFPA 1936 | All models also available in dual hose version
CU 4007 C
CU 4020 C GP
CU 4031 C GP
--flatter design for better access in narrow spaces --clear view under all circumstances
Squeezes (softer aluminium) blade holder. Blades are squeezed indirectly only.
Spreaders
SP 4280 C
Spreaders
specifications EN 13204 classification spreading max. spreading force squeezing force pulling force weight, ready for use Speed Valve / integrated lighting mm kN / t kN / t kN / t kg SP 4230 C AS33/835 - 17.2 835 86 / 8.8 47 / 4.8 53 / 5.4 17.2 / SP 4240 C AS43/686 - 18.1 686 206 / 21.0 65 / 6.6 90 / 9.2 18.1 / SP 4241 C AS43/686 - 18.8 686 331 / 33.7 66 / 6.7 90 / 9.2 18.8 / SP 4260 C BS60/833-23.9 833 269 / 27.4 83 / 8.5 104 / 10.6 23.9 / SP 4280 C CS85/677-26.9 677 397 / 40.5 177 / 18.1 143 / 14.5 26.9 /
Tested according to EN 13204 and NFPA 1936 | All models also available in dual hose version
Spreaders - accessories
available for models 1 x spare tip 1 x cutting tip set pulling attachments set pulling chains 1 x spare tip with extra long tooth * case with all tips (2 each) and set pulling attachments case with set pulling chains * not in case with tips 4230 4240 / 4241 4260 4280
Versatile
spreading
pulling
squeezing
cutting
Combi tools
CT 4150 C
Combi tools
specifications EN 13204 classification spreading max. spreading force cutting opening cutting force squeezing force pulling force weight, ready for use integrated lighting / i-Bolt mm kN / t mm kN / t kN / t kN / t kg CT 4120 C BK26/268-E-8.7 268 200 / 20.4 191 247 / 25.2 24 46 / 4.7 61 / 6.2 8.7 / CT 4150 C CK35/360-H-14.2 360 211 / 21.5 229 380 / 38.8 32 76 / 7.8 51 / 5.2 14.2 /
Combi set
specifications CT 4123 C 3-stage hand pump HTT 1800 UC mounted on stainless steel bottom plate with non-slip carrying handles 5m. CORETM hose, orange, with CORETM couplers on both ends Combi tool CT 4120 C weight set kg 35.0
consisting of
Tested according to EN 13204 and NFPA 1936 | All models also available in dual hose version A complete compact rescue system for rapid interventions.
10
TR 4350 C
TR 4340 C
Rams
specifications EN 13204 classification spreading force over full stroke spreading stroke spreading force 1st plunger spreading force 2nd plunger spreading stroke 1st plunger spreading stroke 2nd plunger total spreading stroke retracted/extended length weight, ready for use kN / t mm kN / t kN / t mm mm mm mm kg -315/465 7.6 RA 4311 C R100/150-7.6 100 / 10.2 150
single plunger
RA 4313 C R100/250-9.0 100 / 10.2 250 RA 4315 C R100/400-10.9 100 / 10.2 400
telescopic plunger
TR 4340 C TR217/158-81/124-10.8 --217 / 22.1 81 / 8.3 158 124 TR 4350 C TR217/388-81/354-16.3 --217 / 22.1 81 / 8.3 388 354 742 533/1275 16.3
-415/665 9.0
-565/965 10.9
Tested according to EN 13204 and NFPA 1936 | All models also available in dual hose version
Rams - accessories
description ram support HRS 22 (NCTTM) 125 mm
for models
RA --TR ----
RA 4311 C
RA 4313 C
RA 4315 C
11
RA 4331 C
RA 4332 C
Rams
specifications EN 13204 classification spreading force over full stroke pulling force over full stroke spreading / pulling stroke retracted/extended length weight, ready for use kN / t kN / t mm mm kg
single plunger
RA 4321 C R161/250-11.1 161 / 16.4 50 / 5.1 250 512/762 11.1 RA 4331 C R161/350-12.6 161 / 16.4 50 / 5.1 350 612/962 12.6
double plunger
RA 4322 C R161/480-15.4 161 / 16.4 50 / 5.1 2 x 240 745/1225 15.4 RA 4332 C R161/680-18.3 161 / 16.4 50 / 5.1 2 x 340 945/1625 18.3
Tested according to EN 13204 and NFPA 1936 | All models also available in dual hose version
Rams - accessories
RA 4321 C
description ram support HRS 22 (NCTTM) rim adapter set, in carrying / storage box complete set of accessories in carrying / storage box set pulling chains in carrying / storage box carrying handle
RA 4322 C
360
Extendo ram
12
Extendo ram
specifications EN 13204 classification spreading force mechanical stroke hydraulic stroke total stroke retracted/extended length weight, ready for use kN / t mm mm mm mm kg XR 4360 C R100/650-13.4 TR100/300-100/350-13.4 100 / 10.2 300 350 650 625 / 1275 13.4
Tested according to EN 13204 and NFPA 1936 | Also available in dual hose version
Adjustable carrying handle for easy use of ram on all sides of the car.
10 t 10 t 10 t
Motor pumps
13
SPU 16 PC whisper pump with ECO-switch DPU 31 PC whisper pump with ECO-switch PU 30 C
number of tool connections 3) (effective) capacity oil tank weight, ready for use 4)
1) also available in dual hose version for single or alternative tool operation | 2) EN 13204: STO = Single Tool Operation MTO = Multiple (simultaneous) Tool Operation | 3) a CORETM pump with connection for 1 tool offers the same operational usability as a dual hose pump with 2 connections | 4) including hydraulic and engine oil, fuel and coupler(s) | 5) also available in dual hose version
72 dB 68 dB
SPU 16 DPU 31
--according to EN ISO 11201 --more comfortable for victim and better workplace for rescuer
Motor pumps
14
SPU 35 PC
SPU 35 PCF
Motor pumps
specifications EN 13204 classification 2) number of tool connections 3) effective capacity oil tank weight, ready for use
1)
petrol
SPU 35 PC / PCF 1) STO 1 cc kg 2000 25.2 / 27.4
2)
electric
SPU 35 DC / DCF 1) STO 1 2000 26.4 / 27.8
3)
diesel
SPU 35 YCF 1) STO 1 2000 48.2
TM
SPU 35 PC / DC are with carrying handle, SPU 35 PCF / DCF / YCF are with protection frame | EN 13204: STO = Single Tool Operation | a CORE pump with connection for 1 tool offers the same operational usability as a traditional dual hose pump with 2 connections | All models also available in dual hose version in both STO (Single Tool Operation) and ATO (Alternative Tool operation)
Motor pumps
15
DPU 60 PC
MPU 60 DC
Motor pumps - petrol / electric specifications EN 13204 classification weight, ready for use 3) also available petrol engine with electric start electric motor 380-440 VAC
1) 2)
DUO - 2 connections - 2 tools working simultaneously DPU 60 PC 1) DPU 60 DC 1) MTO cc kg 46.1 DPU 60 PXC DPU 60 EC 4000 45.7
TRIO - 3 connections - 3 tools working simultaneously MPU 60 PC 1) MPU 60 DC 1) MTO 4000 50.6 MPU 60 PXC 55.5
PC models with petrol engine, DC models with electric engine | 2) EN 13204: MTO = Multiple (simultaneous) Tool Operation 3) including hydraulic and engine oil, fuel and couplers | all models also available in dual hose version
Build-on hose reels length hoses colour hoses m left / right 15-20-25 orange / orange orange / blue blue / blue
Build your own Compact Rescue Module with petrol or electric engine
2
1 1 3 DPU 60 PC CRM 20 CWT 1. Choose a pump above. 2. Choose the length of hoses for the hose reel - 15 or 20 m. 3. Add following optional accessories (see picture) 1 = carrying handle set 2 = tool support set 3 = foldable wheel set CRM pumps are delivered completely mounted with hoses and accessories.
16
HTW 1800 C
FTW 1800 C
Hand / Foot pumps specifications EN 13204 classification source of energy effective capacity oil tank weight ready for use
1) 2)
single hose
HTW 300 ABU1) -hand cc kg
2)
dual hose
HTW 700 ABU hand 710 9.1 HTW 1800 C hand 1800 10.8
CORETM
FTW 1800 C STO foot 1800 11.3 hand 1800 18.0 HTT 1800 UC
HTT 1800 UC
Pumps - air driven specifications EN 13204 classification max. air pressure effective capacity oil tank weight, ready for use
1)
17
CORETM hoses 5 m.
Hoses - CORE
colours 1) length weight 2)
1)
Hoses - single
20 14.3 1 1.0 2 1.3 3 1.6 5 2.3
m kg
15 6.9
20 9.1
5 4.5
10 7.8
15 11.0
25 22.2
single - left or right version left / right m kg 15 19.5 20 22.0 25 24.8 30 27.3 2 x 15 39.5
18
BCT 4120
BCU 4010 GP
Self-contained rescue tools specifications EN 13204 classification spreading max. spreading force cutting force round bar squeezing force pulling force weight, ready for use integrated lighting mm kN / t kN / t mm kN / t kN / t kg
battery tools combi BCT 4120 BK26/268-E-15.3 268 200 / 20.4 247 / 25.2 24 46 / 4.7 61 / 6.2 15.3 cutter BCU 4010 GP AC116-D-14.7 --254 / 25.9 24 --14.7
battery pouch power cable set pulling chains set pulling adapters
carrying frame
carrying harness
carrying bag
carrying strap
Extremely portable
--compact, lightweight and perfectly balanced
19
HPW 4624
Self-contained rescue tools specifications EN 13204 classification min. insertion height max. lifting height spreading max. spreading force cutting force round bar squeezing force pulling force weight, ready for use integrated lighting mm mm mm kN / t kN / t mm kN / t kN / t kg combi
hand-operated tools cutter HCU 4010 GP AC116-D-10.3 ----254 / 25.9 24 --10.3 -Power Wedge HPW 4624 -6 51 -253 / 25.8 ----11.8 HCU 4010 GP HCT 4120 BK26/268-E-10.8 --268 200 / 20.4 247 / 25.2 24 46 / 4.7 61 / 6.2 10.8 --
180
HCT 4120
For pulling attachments and pulling chains of hand-operated combi HCT 4120 see accessories battery tools.
Self-contained
--pump integrated in tool, so no additional pump and hose(s) needed --easy to carry to remote locations --easy to use in confined spaces
20
Power Wedge specifications min. insertion height max. lifting height spreading force weight, ready for use
1)
Power Wedge creates opening for lifting bag (see page 28). Toe jack specifications max. capacity on saddle max. capacity on toe lifting height / plunger stroke closed height min. insertion height toe weight, ready for use kN / t kN / t mm mm mm kg
TJ 3610
21
--heavy-duty: designed to quickly break away large, thick pieces of concrete --limited dust: supports a clear view at the rescue scene --no vibrations: prevents risk of secondary collapse --ideal to use in combination with mini cutter CU 4007 for cutting re-bar --more silent than use of rescue saw: only pump produces sound
A perfect combination: crushing concrete with the CC 20 C and cutting re-bar with mini cutter CU 4007 C (or SMC 4006 C).
Pipe squeezer specifications max. squeezing force max. outside pipe max. wall thickness pipe weight, ready for use kN / t mm mm kg HPS 60 AU 147 / 15 60 4.0 8.6
HPS 60 AU
Cable cutters specifications capacity max. jaw opening capacity solid steel capacity ground cable capacity telephone cable weight, ready for use kN / t mm mm mm mm kg
Steel cable HWC 16 U 54 / 5.5 20 16 13 --2.2 HWC 20 U 153 / 15.6 50 20 19 --9.0 HWC 32 U 262 / 26.7 32 32 25 --9.9
Electric cable HCC 85 U 51 / 5.2 85 --50 85 7.3 HCC 100 U 91 / 9.2 100 --75 100 13 HWC 32 U
HCC 85 U
22
SMC 4006 C 1) mm kN / t mm kg
2)
SMC 4006 C
Mini cutter specifications 1 with fixed coupler 2 with 30 cm pigtail hose; in synthetic case 3 360 rotation elbow and 30 cm pigtail hose; in synthetic case 4 with 360 rotation elbow and handpump HTW 300 ABU mounted with 2m. hose; in synthetic case cutting force kN / t 79 / 8.0 round bar weight, ready for use mm kg 15 3.1 HMC 8 U
Door openers specifications spreading force pushing force min. / max. length weight, ready for use
1)
with rotating hose connection and handle, delivered in synthetic carrying / storage box; also available with 30 cm pigtail hose, without handle
HDO 100
HDR 50
23
HRS 22
--suitable for every door opening: HRS 22 NCTTM for wider door sills and B-pillars of new model cars --various positioning bars for different ramming angles --NCTTM version with teeth providing grip and profiled bars to prevent tilting of the ram
HRS 22 NCT
Rim adapter set weight, incl. case kg 12.4 --can be used with rams RA 4321-22 C / RA 4331-32 C --rescuer does not have to move under the vehicle --can also be used to push away the steering column of a truck
Chocks & blocks set A 2 x step chock 2 x wedge small 2 x wedge large set B 2 x lock block low 2 x lock block medium 2 x lock block high 2 x wedge small 2 x wedge large --made of recycled polyethylene, water- and oil-resistant --virtually indestructable, longer lifespan than wood --non-slip interlocking profile Set B Set A
Tool stations dimensions (L x W) weight cm kg 200 x 150 2.3 250 x 200 3.7
--durable, water- and dirt-repellent PVC-coated polyester --foldable, so easy to carry and store
--ensures optimal safety for the victim --made of thick yet flexible PVC material --transparent for continuously monitoring the victim --with 4 handles to hold in any position
Window punch material anodized aluminium and heat-treated steel --can be attached to clothing by means of clip --fast, effective and safe
24
Secunet airbag safety cover weight g 250 --easy to install, within seconds --for all passenger cars and modern vans --in synthetic storage box with wall-mounting bracket
Sharp Edge Protection Covers dimensions cm cover with Velcro blanket with magnets 26 x 30 60 x 60 150 x 60 weight kg 0.18 0.52 1.20
SEP 5 contents 2x 2x 1x
SEP 10 contents 4x 4x 2x
--wear-resistant, fire-retardant polyester, water-repellent --blankets with magnets for instant attachment to a vehicle --washable (magnets are removable)
--quick installation and length adjustment --stable triangle in less than 1 minute with only 1 strut --accessory bag with various heads, tensioning belts and connection straps
VS 7
Holmatro RFID
About Holmatro RFID
25
FREE OF CHARGE
This free web based system helps you manage your equipment inventory quicker and easier than ever before. It takes a large administrative burden away from you and allows you to focus on your most important task: saving lives. The system incorporates Radio Frequency Identification technology using radio waves to transmit information to and from RFID product tags. This proven technology does not interfere with other communication systems. Holmatro rescue equipment is standard RFID tagged and ready to add to your personal inventory through the Holmatro RFID web portal. It is also possible to add and tag any other assets.
Centralized product information / documentation Service & maintenance registration Password protected
For more information please use the RFID web portal link on www.holmatro.com/rescue
PowerShoreTM
26
One super lightweight shoring and lifting system for every rescue situation
--vehicle extrication
--trench rescue
struts with hydraulic cylinder - 100 kN / 10.1 t model HS 1 Q 5 FL HS 1 Q 10 FL HS 1 L 5+ HS 1 L 10+ locking system Auto-lock Auto-lock Locknut Locknut retracted length mm 632 1092 575 1035 stroke mm 252 252 252 252 weight kg 10.3 13.0 9.2 11.9
struts with pneumatic cylinder - 4 kN / 0.4 t model AS 3 Q 5 FL AS 3 Q 10 FL AS 3 L 5+ AS 3 L 10+ locking system Auto-lock Auto-lock Locknut Locknut retracted length mm 632 1092 575 1035 stroke mm 252 252 252 252 weight kg 11.2 7.3 10.1
Auto-lock: plunger with automatic locking mechanism that locks in steps of 9 mm. Retracting the plunger is only possible after releasing the locking mechanism. Locknut: plunger with thread and Locknut. When the plunger is extended the Locknut can be secured.
HS 1 L 5+
AS 3 Q 5 FL
Single or double control unit, pressure reducer, air hoses and air bottle
PowerShore manual (mechanical) struts model MS 2 L 2 + MS 2 L 5 + locking system Thread Locknut retracted length mm 250 575 stroke mm 127 250 weight kg 3.5 6.7
Extensions / connector model SX 1 SX 2 SX 5 SX 10 SX 15 FX 1 extension mm 125 250 500 1000 1500 colour code white blue yellow green red weight kg 1.5 1.9 2.8 4.6 6.4 1.4
Thread: plunger with thread. When the plunger is extended the thread is self-retaining. Locknut: plunger with thread and a Locknut. When the plunger is extended the Locknut can be secured.
Connector FX1: with female snap-lock system on both sides. To connect the male end of an extension with one of the heads. In this way it is possible to make a fixed shore without the use of a strut.
MS 2 L 2+ FX 1 SX 1 SX 2
See also separate PowerShoreTM brochure and www.holmatro.com/rescue for various advisory sets
8.4
PowerShoreTM
Accessories Flat head; 0.3 kg. V-block head small; 0.7 kg. Adjustable hook wrench.
27
Tilting head with nailing plate; Max. angle 45o in all directions; 2.5 kg.
Beam support head; 150 mm; with nailing holes; 1.7 kg.
Beam support head; 100 mm; with nailing holes; 1.2 kg.
2-way block; to support 2 tilting heads. 3-way swivel head; contains 3 integrated swivel heads for use with up to 3 shoring lines in various directions.
L-support head; with nailing holes; 1.0 kg. Swivel head; can be placed in almost any position and against each other for mutual support; 2.0 kg.
Lightweight
--easy to carry --easy to assemble and very quick to position
Lifting bags
28
Lifting bags - max. working pressure 8 bar model HLB 1 HLB 3 HLB 5 HLB 10 HLB 12 HLB 18 HLB 20 HLB 24 HLB 29 HLB 32 HLB 40 HLB 67 max. effective lifting force kN / t 10 / 1.0 35 / 3.7 50 / 5.1 100 / 10.2 120 / 12.2 180 / 18.3 200 / 20.3 240 / 24.4 300 / 30.6 320 / 32.6 400 / 40.7 670 / 68 max inflation height mm 80 130 150 215 225 240 290 215 348 380 405 520 dimensions (L x W) mm 150 x 150 228 x 228 270 x 270 380 x 380 408 x 408 660 x 360 508 x 508 1000 x 310 611 x 611 658 x 658 714 x 714 908 x 908 weight kg 0.6 1.5 2.0 3.8 5.0 6.8 6.7 9.5 9.8 13.0 15.1 23.5
--thickness incl. profile of HLB 1/3/5 is 22 mm and of other models 25 mm --reflecting labels: HLB 1/3/5 on 1 corner; other models on 3 corners
Accessories item 1 2 3 4 5 6 7 8 description air hoses 5 and 10 m.: red, yellow or blue shut-off hose with safety pressure reducer for both 200 and 300 bar double control unit, safety valve set at 8.5 bar single control unit, safety valve set at 8.5 bar connection piece for connection of 2 air bottles synthetic control box, safety valve set at 8.5 bar air bottle 6 litres, 200 or 300 bar adapter set for connection on various air sources air control sets 200 or 300 bar consisting of air hoses, shut-off hoses, pressure reducer, control unit and connection piece, in storage box 3 4 5 6 1 2
29
Lifting bags - max. working pressure 0.5 bar model LAB 4 UN LAB 6 UN LAB 9 UN LAB 16 UN lifting capacity (a pair) kN / t 39 / 4.0 59 / 6.0 88 / 9.0 157 / 16.0 dimensions in storage bag (L x W) mm 700 x 700 850 x 850 1050 x 1050 1320 x 1320 1 2 3 5 4 4 weight (a set*) kg 26 33 40 64 height deflated / inflated mm 60 / 620 60 / 620 60 / 620 60 / 620
* Each set consists of: 1 1 x storage bag 2 2 x lifting bag (of equal capacity) 3 1 x pressure reducer 4 2 x low pressure hose 5 1 x double control unit 6 1 x repair kit
Flow stoppers - max. working pressure 3 bar specifications min bursting pressure max. back pressure smallest diameter largest diameter length weight bar bar mm mm mm kg OLS 100 / 200 9 1 96 200 500 2.0 OLS 200 / 400 9 1 195 400 500 4.0 OLS 300 / 600 9 1 298 600 700 9.0 OLS 500 / 1000 9 1 455 1000 1000 20.0
Flow stoppers - accessories description single control unit, 3 bar safety valve pressure reducer 200/300 bar air hoses, 3, 5, 10 or 15 m., green air bottle 6 litres, 200 or 300 bar
30
handles with integrated LED lights to update your existing 3000-series tools testing & measuring equipment
sets of 2 blades for cutters and combi tools hydraulic oil, engine oil and lubricants
Training materials
Vehicle Extrication Techniques
A richly illustrated book, interactive cd-rom and a series of 8 posters on vehicle extrication techniques and rescue tool handling. For group training or to brush up your personal skills. Various languages available.
31
interactive cd-rom
More detailed information on our products can be found in our catalogue or on www.holmatro.com/rescue. Please contact your local dealer for further assistance.
Photos in this brochure are made possible by Jeffrey Koper, photographer fire brigade Haarlemmermeer (the Netherlands) and Jeroen Stuve: www.brandweerspotters.nl
Holmatro Rescue Equipment B.V. Raamsdonksveer, The Netherlands T +31 (0)162 58 92 00 E rescue@holmatro.com Manufacturing, sales & service
Holmatro, Inc. Glen Burnie, MD, U.S.A. Manufacturing, sales & service
Holmatro China Shanghai, China Joy Tower, 14th floor Sales & service
www.holmatro.com
Holmatro 0910.01 980.000.346 Disclaimer While the greatest care has been devoted to the content, it is possible that the information in this printed matter is incorrect or incomplete. N.V. Holmatro and its affiliated companies (hereafter: Holmatro) cannot be held liable in any way for the consequences of activities undertaken based on this printed matter. If you have any doubts about the correctness or completeness of the information, you shall contact Holmatro (phone number: +31 (0)162-589200). Nothing from this printed matter can be copied and/or made public in any way without the explicit authorisation of Holmatro.