You are on page 1of 14

TEST CERTIFICATE - Reinforcing Steel

SSSBE REGD. NO. 041909004 &VUDA REGD. NO. UDA/PLAN-05/233/2005

Ref.No.: GES/RST/GHD-8099/01 Date :

Client : Rukmani Engineering Workss


Agency : Adani Power Limited, Mundra
Sample I-D : 5GAPL-001
Material Specification: : M.S. IS:2062 GR A
Project : Adani Power Limited, Mundra
Method of Test : As per ASME, Sec-9

Thickness/
Width Ultimate UTS Mpa
Sr. No. Type of Test Gauge Dia. Area mm2 Character of Failure & Location
mm Load N 410 Min.
Mm

1 Tensile T-1 16.1 18.52 298.17 132840 445.52 Broken out of weld metal
2 Tensile T-2 15.95 18.27 291.4 130240 446.95 Broken out of weld metal

Sr No Type of Test Mandrel Dia Angle of Bend Result


1 38 mm 180 0 Satisfactory
Root Bend
2 38 mm 180 0 Satisfactory
3 38 mm 180 0 Satisfactory
Face Bend
4 38 mm 180 0 Satisfactory

NOTE :

1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.

2.Results given above refer only to the samples submitted for testing.

Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 1
7315
6565
6/27/2008

er of Failure & Location

ken out of weld metal


ken out of weld metal

approval from, GEO


Page 2 of 2
TEST CERTIFICATE - Reinforcing Steel
SSSBE REGD. NO. 041909004 &VUDA REGD. NO. UDA/PLAN-05/233/2005

Ref.No.: GES/RST/GHD-8099/02 Date : 6/27/2008

Client : Rukmani Engineering Workss


Agency : Adani Power Limited, Mundra
Sample I-D : 5GAPL-002
Project : Adani Power Limited, Mundra
Type of Test : Welding Qualification Test
Method of Test : As per ASME, Sec-9

Sr No Type of Test Mandrel Dia Angle of Bend Result


1 38 mm 180 0 Satisfactory
Root Bend
2 38 mm 180 0
Satisfactory
3 38 mm 180 0 Satisfactory
Face Bend
4 38 mm 180 0
Satisfactory

NOTE :

1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.

2.Results given above refer only to the samples submitted for testing.

Remark:- Above Tests are conducted as per ASME Sec IX

Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 2
7315
6565
TEST CERTIFICATE - Reinforcing Steel
SSSBE REGD. NO. 041909004 &VUDA REGD. NO. UDA/PLAN-05/233/2005

Ref.No.: GES/RST/GHD-8099/02 Date : 6/27/2008

Client : Rukmani Engineering Workss


Agency : Adani Power Limited, Mundra
Sample I-D : 5GAPL-003
Project : Adani Power Limited, Mundra
Type of Test : Welding Qualification Test
Method of Test : As per ASME, Sec-9

Sr No Type of Test Mandrel Dia Angle of Bend Result


1 38 mm 180 0 Satisfactory
Root Bend
2 38 mm 180 0
Satisfactory
3 38 mm 180 0 Not Satisfactory
Face Bend
4 38 mm 180 0
Satisfactory

NOTE :

1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.

2.Results given above refer only to the samples submitted for testing.

Remark:- Above Tests are conducted as per ASME Sec IX

Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 2
7315
6565
TEST CERTIFICATE - Reinforcing Steel
SSSBE REGD. NO. 041909004 &VUDA REGD. NO. UDA/PLAN-05/233/2005

Ref.No.: GES/RST/GHD-8099/02 Date : 6/27/2008

Client : Rukmani Engineering Workss


Agency : Adani Power Limited, Mundra
Sample I-D : 5GAPL-004
Project : Adani Power Limited, Mundra
Type of Test : Welding Qualification Test
Method of Test : As per ASME, Sec-9

Sr No Type of Test Mandrel Dia Angle of Bend


1 38 mm 180 0 Satisfactory
Root Bend
2 38 mm 180 0
Satisfactory
3 38 mm 180 0 Satisfactory
Face Bend
4 38 mm 180 0
Satisfactory

NOTE :

1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.

2.Results given above refer only to the samples submitted for testing.

Remark:- Above Tests are conducted as per ASME Sec IX

Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 2
7315
6565
TEST CERTIFICATE - Reinforcing Steel
SSSBE REGD. NO. 041909004 &VUDA REGD. NO. UDA/PLAN-05/233/2005

Ref.No.: GES/RST/GHD-8099/02 Date : 6/27/2008

Client : Rukmani Engineering Workss


Agency : Adani Power Limited, Mundra
Sample I-D : 5GAPL-005
Project : Adani Power Limited, Mundra
Type of Test : Welding Qualification Test
Method of Test : As per ASME, Sec-9

Sr No Type of Test Mandrel Dia Angle of Bend Result


1 38 mm 180 0 Satisfactory
Root Bend
2 38 mm 180 0
Satisfactory
3 38 mm 180 0 Not Satisfactory
Face Bend
4 38 mm 180 0
Satisfactory

NOTE :

1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.

2.Results given above refer only to the samples submitted for testing.

Remark:- Above Tests are conducted as per ASME Sec IX

Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 2
7315
6565
TEST CERTIFICATE - Reinforcing Steel
SSSBE REGD. NO. 041909004 &VUDA REGD. NO. UDA/PLAN-05/233/2005

Ref.No.: GES/RST/GHD-8099/02 Date : 6/27/2008

Client : Rukmani Engineering Workss


Agency : Adani Power Limited, Mundra
Sample I-D : 5GAPL-006
Project : Adani Power Limited, Mundra
Type of Test : Welding Qualification Test
Method of Test : As per ASME, Sec-9

Sr No Type of Test Mandrel Dia Angle of Bend Result


1 38 mm 180 0 Satisfactory
Root Bend
2 38 mm 180 0
Satisfactory
3 38 mm 180 0 Satisfactory
Face Bend
4 38 mm 180 0
Satisfactory

NOTE :

1.This certificate / report shall not be published for commercial purpose except in full without approval from, GEO
ENGINEERING SERVICES, Vadodara.

2.Results given above refer only to the samples submitted for testing.

Remark:- Above Tests are conducted as per ASME Sec IX

Authorized Signatory
D:\1-GES-Vadodara-2008\1. Reports-VDR-08-2\Steel\[tensile & bend.xls]Sheet 2
7315
6565

You might also like